Validation of short tandem repeat analysis for the investigation of cases of disputed paternity

This study details validation of two separate multiplex STR systems for use in paternity investigations. These are the Second Generation Multiplex (SGM) developed by the UK Forensic Science Service and the PowerPlex 1 multiplex commercially available from Promega Inc. (Madison, WI, USA). These multiplexes contain 12 different STR systems (two are duplicated in the two systems). Population databases from Caucasian, Asian and Afro-Caribbean populations have been compiled for all loci. In all but two of the 36 STR/ethnic group combinations, no evidence was obtained to indicate inconsistency with Hardy-Weinberg (HW) proportions. Empirical and theoretical approaches have been taken to validate these systems for paternity testing. Samples from 121 cases of disputed paternity were analysed using established Single Locus Probe (SLP) tests currently in use, and also using the two multiplex STR systems. Results of all three test systems were compared and no non-conformities in the conclusions were observed, although four examples of apparent germ line mutations in the STR systems were identified. The data was analysed to give information on expected paternity indices and exclusion rates for these STR systems. The 12 systems combined comprise a highly discriminating test suitable for paternity testing. 99.96% of non-fathers are excluded from paternity on two or more STR systems. Where no exclusion is found, Paternity Index (PI) values of > 10,000 are expected in > 96% of cases.

Asymmetric adjustment in the City of London office market

Earlier estimates of the City of London office market are extended by considering a longer time series of data, covering two cycles, and by explicitly modeling of asymmetric space market responses to employment and supply shocks. A long run structural model linking real rental levels, office-based employment and the supply of office space is estimated and then rental adjustment processes are modeled using an error correction model framework. Rental adjustment is seen to be asymmetric, depending both on the direction of the supply and demand shocks and on the state of the space market at the time of the shock. Vacancy adjustment does not display asymmetries. There is also a supply adjustment equation. Two three-equation systems, one with symmetric rental adjustment and the other with asymmetric adjustment, are subjected to positive and negative shocks to employment. These illustrate differences in the two systems.

Control and analysis of oriented thin films of lipid inverse bicontinuous cubic phases using grazing incidence small-angle X‑ray scattering

Lipid cubic phases are complex nanostructures that form naturally in a variety of biological systems, with applications including drug delivery and nanotemplating. Most X-ray scattering studies on lipid cubic phases have used unoriented polydomain samples as either bulk gels or suspensions of micrometer-sized cubosomes. We present a method of investigating cubic phases in a new form, as supported thin films that can be analyzed using grazing incidence small-angle X-ray scattering (GISAXS). We present GISAXS data on three lipid systems: phytantriol and two grades of monoolein (research and industrial). The use of thin films brings a number of advantages. First, the samples exhibit a high degree of uniaxial orientation about the substrate normal. Second, the new morphology allows precise control of the substrate mesophase geometry and lattice parameter using a controlled temperature and humidity environment, and we demonstrate the controllable formation of oriented diamond and gyroid inverse bicontinuous cubic along with lamellar phases. Finally, the thin film morphology allows the induction of reversible phase transitions between these mesophase structures by changes in humidity on subminute time scales, and we present timeresolved GISAXS data monitoring these transformations.

Dynamic picture of the inner asteroid belt: implications for the density, size and taxonomic distributions of real objects

In this paper, we construct a dynamic portrait of the inner asteroidal belt. We use information about the distribution of test particles, which were initially placed on a perfectly rectangular grid of initial conditions, after 4.2 Myr of gravitational interactions with the Sun and five planets, from Mars to Neptune. Using the spectral analysis method introduced by Michtchenko et al., the asteroidal behaviour is illustrated in detail on the dynamical, averaged and frequency maps. On the averaged and frequency maps, we superpose information on the proper elements and proper frequencies of real objects, extracted from the data base, AstDyS, constructed by Milani and Knezevic. A comparison of the maps with the distribution of real objects allows us to detect possible dynamical mechanisms acting in the domain under study; these mechanisms are related to mean-motion and secular resonances. We note that the two- and three-body mean-motion resonances and the secular resonances (strong linear and weaker non-linear) have an important role in the diffusive transportation of the objects. Their long-lasting action, overlaid with the Yarkovsky effect, may explain many observed features of the density, size and taxonomic distributions of the asteroids.

Scalar form factors and nuclear interactions

The scalar-isoscalar term in the two-pion exchange NN potential is abnormally large and does not respect the hierarchy of effects predicted by chiral perturbation theory. We argue that this anomaly is associated with non-perturbative effects, which are also present in the pi N scalar form factor.

Indirect Study of the (2)H(d,p)(3)H and (2)H(d,n)(3)He Reactions at Astrophysical Energies via the Trojan Horse Method

The (2)H(d,p)(3)H and (2)H(d,n)(3)He reactions have been indirectly studied by means of the Trojan Horse Method applied to the quasi-free (2)H((3)He, p(3)H)(1)H (2)H((3)He, n(3)He)(1)H reaction at 18 MeV of beam energy. This is the first experiment where the spectator (here (1)H) has been detected in coincidence with the charged participant, avoiding the limitations of standard neutron detectors. The d - d relative energy has been measured from 1.5 MeV down to 2 keV, at center of mass angles from 40A degrees to 170A degrees. Indirect angular distributions are compared with the direct behaviour in the overlapping regions.

Analysis of the combined effect of lasers of different wavelengths for PDT outcome using 600, 630, and 660 nm

We investigated the effects of photodynamic therapy (PDT) outcome when combining three laser systems that produce light in three different wavelengths (600, 630, and 660 nm). Cooperative as well as independent effects can be observed. We compared the results of the combined wavelengths of light with the effect of single laser for the excitation of the photosensitizer. In the current experiment, the used photosensitizer was Photogem (R) (1.5 mg/kg). Combining two wavelengths for PDT, their cumulative dose and different penetrability may change the overall effect of the fluence of light, which can be effective for increasing the depth of necrosis. This evaluation was performed by comparing the depth and specific aspect of necrosis obtained by using single and dual wavelengths for irradiation of healthy liver of male Wistar rats. We used 15 animals and divided them in five groups of three animals. First, Photogem (R) was administered; follow by measurement of the fluorescence spectrum of the liver before PDT to confirm the level of accumulation of photosensitizer in the tissue. After that, an area of 1 cm(2) of the liver was illuminated using different laser combinations. Qualitative analysis of the necrosis was carried out through histological and morphological study. [GRAPHICS] (a) - microscopic images of rat liver cells, (b) - superficial necrosis caused by PDT using dual-wavelength illumination, (c) - neutrophilic infiltration around the vessel inside the necrosis, and (d) - neutrophilic infiltration around the vessel between necrosis and live tissue (C) 2011 by Astro Ltd. Published exclusively by WILEY-VCH Verlag GmbH & Co. KGaA

Simulation study of cascade heat pump for solar combisystems

This paper focuses on the study of cascade heat pump systems in combination with solar thermal for the production of hot water and space heating in single family houses with relatively high heating demand. The system concept was developed by Ratiotherm GmbH and simulated with TRNSYS 17. The basic cascade system uses the heat pump and solar collectors in parallel operation while a further development is the inclusion of an intermediate store that enables the possibility of serial/parallel operation and the use of low temperature solar heat. Parametric studies in terms of compressor size, refrigerant pair and size of intermediate heat exchanger were carried out for the optimization of the basic system. The system configurations were simulated for the complete year and compared to a reference of a solar thermal system combined with an air source heat pump. The results show ~13% savings in electricity use for all three cascade systems compared to the reference. However, the complexity of the systems is different and thus higher capital costs are expected.

A interação entre sistemas de informação e o trabalho no setor bancário no Brasil: uma análise estruturalista

Esta tese teve como objetivo entender em que condições se dá o processo de interação entre o trabalho e três sistemas de informação (SIs) utilizados em duas instituições bancárias no Brasil. Procurei compreender como os sistemas de informação são reconstruídos por seus usuários, nas práticas do trabalho, e como o trabalho é modificado pela inserção de novos sistemas. Utilizando procedimentos metodológicos baseados no estruturalismo, busquei a estrutura que subjaz às práticas adotadas pelos agentes, associadas aos sistemas e ao trabalho. A coleta de dados para a pesquisa foi realizada com base em 46 entrevistas semi-estruturadas realizadas com gestores de TI e usuários, pela observação do contexto organizacional e pelo exame de documentos referentes aos sistemas. Na análise dos dados, o diagnóstico e o estudo de 11 práticas me permitiram identificar quais as mais relevantes para a interação entre os agentes e os dispositivos, no que se refere a reconstruções de SIs e a modificações sobre o trabalho. Identifiquei, na pesquisa empírica, uma estrutura de arranjo operacional, que assegura a interação entre agentes e sistemas. Esse arranjo tem a forma de uma retícula de sobreposição das práticas, uma rede de relações. As práticas, em isolado, não garantem a interação entre o sistema e o trabalho. Essa interação é assegurada pela composição entre as práticas. Da interpretação desta estrutura manifesta, identifiquei uma estrutura subjacente à interação entre os sistemas e o trabalho. Alcancei-a buscando as explicações para cada prática. Nestas explicações, identifiquei conjuntos de elementos de poder e resistência, de confluência de interesses individuais e organizacionais e de conformismo e conformidade dos agentes com o que foi instituído pela organização. A análise destes conjuntos de elementos me permitiu chegar à tese sustentada por esta pesquisa: a interação entre os sistemas de informação e o trabalho é definida por uma estrutura de conversão recíproca. Esta conversão se dá pela humanização dos sistemas e pela tecnicização do trabalho. O ajustamento continuado, presente entre os sistemas de informação e o trabalho, faz com que a tecnologia se torne mais adequada ao contexto e que as pessoas estejam mais bem preparadas para lidar com a tecnologia. A estrutura de conversão recíproca tem a forma de um oroborus, a serpente que engole ou vomita a própria cauda e simboliza o que se regenera, se recria. Tal como o oroburus, a estrutura de conversão recíproca é uma auto-reconstrução.

Transparent access to relational, autonomous and distributed databases using semantic web and service oriented technologies

With the constant grow of enterprises and the need to share information across departments and business areas becomes more critical, companies are turning to integration to provide a method for interconnecting heterogeneous, distributed and autonomous systems. Whether the sales application needs to interface with the inventory application, the procurement application connect to an auction site, it seems that any application can be made better by integrating it with other applications. Integration between applications can face several troublesome due the fact that applications may not have been designed and implemented having integration in mind. Regarding to integration issues, two tier software systems, composed by the database tier and by the “front-end” tier (interface), have shown some limitations. As a solution to overcome the two tier limitations, three tier systems were proposed in the literature. Thus, by adding a middle-tier (referred as middleware) between the database tier and the “front-end” tier (or simply referred application), three main benefits emerge. The first benefit is related with the fact that the division of software systems in three tiers enables increased integration capabilities with other systems. The second benefit is related with the fact that any modifications to the individual tiers may be carried out without necessarily affecting the other tiers and integrated systems and the third benefit, consequence of the others, is related with less maintenance tasks in software system and in all integrated systems. Concerning software development in three tiers, this dissertation focus on two emerging technologies, Semantic Web and Service Oriented Architecture, combined with middleware. These two technologies blended with middleware, which resulted in the development of Swoat framework (Service and Semantic Web Oriented ArchiTecture), lead to the following four synergic advantages: (1) allow the creation of loosely-coupled systems, decoupling the database from “front-end” tiers, therefore reducing maintenance; (2) the database schema is transparent to “front-end” tiers which are aware of the information model (or domain model) that describes what data is accessible; (3) integration with other heterogeneous systems is allowed by providing services provided by the middleware; (4) the service request by the “frontend” tier focus on ‘what’ data and not on ‘where’ and ‘how’ related issues, reducing this way the application development time by developers.

Fatores de sucesso na implementação de sistemas integrados de gestão empresarial (ERP): estudo de caso em uma média empresa

RAMOS, A. S. M.; OLIVEIRA, M. A. Fatores de sucesso na implementação de sistemas integrados de gestão empresarial (ERP): estudo de caso em uma média empresa. In: ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÂO, 22., 2002, Curitiba-PR. Anais... Porto Alegre-RS: ABEPRO, 2002. v. 1.

Produção de minitubérculos básicos de batata em três sistemas hidropônicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação das cultivares de bananeira Prata-Anã, Thap Maeo e Caipira em diferentes sistemas de plantio no norte de Minas Gerais

A banana é uma das frutas tropicais mais consumidas no mundo, respondendo por, aproximadamente, 10% do comércio mundial de frutas. O objetivo deste trabalho foi avaliar o crescimento e a produção de três cultivares de bananeira sob três sistemas de plantio, em dois ciclos de produção, no período compreendido entre março de 2004 e outubro de 2006, em Janaúba, Minas Gerais. O delineamento experimental foi o de blocos casualizados e duas análises estatísticas: Primeira: 'Prata-Anã' em seis diferentes sistemas de plantio; Segunda: fatorial 2 x 2 + 1, com as variedades Caipira e Thap Maeo, em três diferentes sistemas de plantio, com quatro repetições e seis plantas úteis por parcela. Foram avaliadas as seguintes características: altura de planta, circunferência do pseudocaule, número total de folhas, número de folhas vivas na colheita, número de dias do plantio à colheita, massa do cacho, produtividade, número de pencas e número de frutos por cacho. As características avaliadas foram submetidas à análise de variância com desdobramentos das interações significativas, tendo os efeitos dos tratamentos comparados pelo teste de Tukey, a 5 % de probabilidade. A mistura de cultivares e o uso de bordaduras não influenciaram na maioria das características de crescimento, nas três cultivares estudadas. A cultivar Thap Maeo foi superior à 'Caipira' na maioria das características avaliadas, no primeiro e segundo ciclos. Para os sistemas de plantio, foi superior o plantio com uma bordadura. A análise da variedade Prata-Anã dentro dos seis sistemas de plantio apresentou diferença significativa para as características de número de folhas vivas na colheita, no segundo ciclo, número de pencas/cacho e número de frutos/cacho.

Produção de leite e comportamento de amamentação em cinco sistemas de produção de gado de corte

Foram estudados a produção de leite de vacas Nelore e o comportamento de amamentação em diferentes sistemas de produção: NR-Nelore Referência, sob manejo extensivo (manejo tradicional); NI-Nelore, sob manejo intensivo; e três cruzamentos CN-Canchim x Nelore, AN-Angus x Nelore e SN-Simental x Nelore, sob manejo intensivo. em três momentos da lactação (60, 120 e 180 dias após o parto), foram medidos, nos bezerros, o número e a duração das mamadas, o ganho diário de peso (kg/dia) e o peso à desmama. O momento da lactação e a interação sistema de produção x momento da lactação apresentaram efeito significativo sobre a produção de leite. A produção de leite não apresentou corrrelação com o comportamento de amamentação nem com o ganho de peso dos bezerros dos diferentes sistemas de produção. Condições deficientes de alimentação não resultaram em menores produções de leite de vacas Nelore, mas sim em acentuadas perdas de peso (80 kg) durante a estação de monta no sistema NR. O tempo diário de amamentação apresentou diminuições significativas no sistema extensivo com o decorrer da lactação, enquanto os sistemas intensivos não mudaram ou aumentaram os minutos de amamentação por dia. Para as condições nas quais o experimento foi desenvolvido, os bezerros cruzados apresentaram os melhores desempenhos durante a fase pré-desmama, em comparação com os bezerros Nelore.

Comportamento de adesão da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis proveniente de três condições de manejo

This study aimed to evaluate the adhesion ability of eucalyptus lumber from three tillage systems, using adhesives: resorcinol formaldehyde and two adhesives in water emulsion based on vinyl poly-acetate. The management systems were characterized by three strata, the stratum one (E1) characterized by wood from coppice and 70 months of age, the stratum two (E2) characterized by wood and retirement age of 166 months and stratum three (E3), also characterized by retirement at 70 months of age. The wood was derived from a random mixture of the first two sawn logs, each three feet from the base, which comprised three treatments on the adhesive used. We evaluated the shear strength by compression tests and the percentage of wood failure in the glue line. Based on the results obtained, it can be said that the adhesion had satisfactory performance with all the resins used, and the average values of shear strength of the glue line were shown to be equivalent to the shear strength of solid wood only for the samples which adhered with 'Wonderbond' adhesive and also provide higher values for wood failure (97.64%). The highest density present in the wood of the second stratum (E2) influenced only sticking with the resorcinol formaldehyde resin. For polyvinyl acetate (Cascorez 2590), shear values decreased in the third management condition (E3).