Programação no ensino de matemática utilizando Processing 2: Um estudo das relações formalizadas por alunos do ensino fundamental com baixo rendimento em matemática

Pós-graduação em Educação para a Ciência - FC

Estudo para determinação de uma metodologia para o ensaio de arrancamento que avalia aderência aço/concreto

This work talks about the importance of the steel adhesion to concrete, reinforced concrete structures, their testing and forms of measurement used and how the results are used in the structural design, which uses as a reference the NBR 6118 and NBR 7480. It also deals with the importance of a reliable assessment, discussing failures that the test used, NBR 7477, features in specific circumstances, as discussed under the EC-094. It also presents an initial proposal for simplified pullout test, which aims to analyze the grip on steel bars with diameter less than 10 mm, which results when used standardized testing by ABNT NBT 7477, has shown excessive variability, the main criticism of the trial today used without distinction to be established thick or thin bars. The proposal also presented methodology is in the consolidation phase, given the time and the volume of necessary tests. For this reason it is not possible to make a comparison between the values obtained and the results of the test used on the basis of the standard in force, this can only be done once the front with a continuation of this work

Evaluation of Blood Assays for Detection of Mycobacterium bovis in White-Tailed Deer (Odocoileus virginianus) in Michigan

Surveillance and control activities related to bovine tuberculosis (TB) in free-ranging, Michigan white-tailed deer (Odocoileus virginianus) have been underway for over a decade, with significant progress. However, foci of higher TB prevalence on private lands and limited agency ability to eliminate them using broad control strategies have led to development and trial of new control strategies, such as live trapping, testing, and culling or release. Such strategies require a prompt, accurate live animal test, which has thus far been lacking. We report here the ability of seven candidate blood assays to determine the TB infection status of Michigan deer. Our aims were twofold: to characterize the accuracy of the tests using field-collected samples and to evaluate the feasibility of the tests for use in a test-and-cull strategy. Samples were collected from 760 deer obtained via five different surveys conducted between 2004 and 2007. Blood samples were subjected to one or more of the candidate blood assays and evaluated against the results of mycobacterial culture of the cranial lymph nodes. Sensitivities of the tests ranged from 46% to 68%, whereas specificities and negative predictive values were all .92%. Positive predictive values were highly variable. An exploratory analysis of associations among several host and sampling-related factors and the agreement between blood assay and culture results suggested these assays were minimally affected. This study demonstrated the capabilities and limitations of several available blood tests for Mycobacterium bovis on specimens obtained through a variety of field surveillance methods. Although these blood assays cannot replace mass culling, information on their performance may prove useful as wildlife disease managers develop innovative methods of detecting infected animals where mass culling is publicly unacceptable and cannot be used as a control strategy.

A Comparison of Induction Motor Starting Methods Being Powered by a Diesel-Generator Set

Starting induction motors on isolated or weak systems is a highly dynamic process that can cause motor and load damage as well as electrical network fluctuations. Mechanical damage is associated with the high starting current drawn by a ramping induction motor. In order to compensate the load increase, the voltage of the electrical system decreases. Different starting methods can be applied to the electrical system to reduce these and other starting method issues. The purpose of this thesis is to build accurate and usable simulation models that can aid the designer in making the choice of an appropriate motor starting method. The specific case addressed is the situation where a diesel-generator set is used as the electrical supplied source to the induction motor. The most commonly used starting methods equivalent models are simulated and compared to each other. The main contributions of this thesis is that motor dynamic impedance is continuously calculated and fed back to the generator model to simulate the coupling of the electrical system. The comparative analysis given by the simulations has shown reasonably similar characteristics to other comparative studies. The diesel-generator and induction motor simulations have shown good results, and can adequately demonstrate the dynamics for testing and comparing the starting methods. Further work is suggested to refine the equivalent impedance presented in this thesis.

Service Utilization Patterns of Homeless Youth

Few studies exist on the types of characteristics associated with service utilization (e.g., shelters, food programs) among homeless youth in the U.S. Services are important, however, because without food and shelter, numerous homeless youth resort to trading sex in order to meet their daily survival needs. Access to physical and mental health services gives homeless youth more of an opportunity to integrate into mainstream society than they would otherwise have. To address this gap in our understanding, my study examines what traits (e.g. age, race, abuse history) correlate with the use of shelters, food programs, street outreach, counseling, STD/STI testing, and HIV testing among homeless youth. The Theory of Reasoned Action is used as an ideological framework in conjunction with theoretical constructs of risk, need, and prior service exposure. Data were obtained from the Social Network and Homeless Youth Project (SNHYP), a sample of 249 Midwestern homeless youth ages 14 to 21, which used trained interviewers to conduct structured interviews with youth. Respondents were interviewed in both shelters and on the street over a period of approximately one year. My findings revealed that homeless youth’s service usage varied across gender, sexual orientation, age, having recently held a job, and having ever been physically or sexually abused, in addition to other characteristics. Conversely, service use was not associated with social network size or subjective norms (i.e. attitudes of peers, such as acceptance of condom use) of youths’ social networks. By examining these areas, my study builds on previous research on homeless youth and lays the framework for future research on service utilization by homeless youth.

Designing Software Product Lines for Testability

Software product line (SPL) engineering offers several advantages in the development of families of software products such as reduced costs, high quality and a short time to market. A software product line is a set of software intensive systems, each of which shares a common core set of functionalities, but also differs from the other products through customization tailored to fit the needs of individual groups of customers. The differences between products within the family are well-understood and organized into a feature model that represents the variability of the SPL. Products can then be built by generating and composing features described in the feature model. Testing of software product lines has become a bottleneck in the SPL development lifecycle, since many of the techniques used in their testing have been borrowed from traditional software testing and do not directly take advantage of the similarities between products. This limits the overall gains that can be achieved in SPL engineering. Recent work proposed by both industry and the research community for improving SPL testing has begun to consider this problem, but there is still a need for better testing techniques that are tailored to SPL development. In this thesis, I make two primary contributions to software product line testing. First I propose a new definition for testability of SPLs that is based on the ability to re-use test cases between products without a loss of fault detection effectiveness. I build on this idea to identify elements of the feature model that contribute positively and/or negatively towards SPL testability. Second, I provide a graph based testing approach called the FIG Basis Path method that selects products and features for testing based on a feature dependency graph. This method should increase our ability to re-use results of test cases across successive products in the family and reduce testing effort. I report the results of a case study involving several non-trivial SPLs and show that for these objects, the FIG Basis Path method is as effective as testing all products, but requires us to test no more than 24% of the products in the SPL.

Estudo para determinação de uma metodologia para o ensaio de arrancamento que avalia aderência aço/concreto

This work talks about the importance of the steel adhesion to concrete, reinforced concrete structures, their testing and forms of measurement used and how the results are used in the structural design, which uses as a reference the NBR 6118 and NBR 7480. It also deals with the importance of a reliable assessment, discussing failures that the test used, NBR 7477, features in specific circumstances, as discussed under the EC-094. It also presents an initial proposal for simplified pullout test, which aims to analyze the grip on steel bars with diameter less than 10 mm, which results when used standardized testing by ABNT NBT 7477, has shown excessive variability, the main criticism of the trial today used without distinction to be established thick or thin bars. The proposal also presented methodology is in the consolidation phase, given the time and the volume of necessary tests. For this reason it is not possible to make a comparison between the values obtained and the results of the test used on the basis of the standard in force, this can only be done once the front with a continuation of this work

A study of multidrug-resistant tuberculosis in risk groups in the city of Santos, Sao Paulo, Brazil

Monitoring the extent of and trends in multidrug-resistant tuberculosis (MDR-TB) is a priority of the Brazilian National Tuberculosis Control Programme. The current study aimed to estimate the incidence of MDR-TB, describe the profile of TB drug resistance in risk groups and examine whether screening for MDR-TB adhered to the recommended guidelines. A descriptive study that examined diagnosed cases of pulmonary TB was conducted in the city of Santos, Brazil, between 2000-2004. Of the 2,176 pulmonary TB cases studied, 671 (30.8%) met the criteria for drug sensitivity testing and, of these cases, 31.7% (213/671) were tested. Among the tested cases, 9.4% were resistant to one anti-TB drug and 15% were MDR. MDR was observed in 11.6% of 86 new TB cases and 17.3% of 127 previously treated cases. The average annual incidence of MDR-TB was 1.9 per 100,000 inhabitants-years. The extent of known MDR-TB in the city of Santos is high, though likely to be underestimated. Our study therefore indicates an inadequate adherence to the guidelines for MDR-TB screening and suggests the necessity of alternative strategies of MDR-TB surveillance.

Late entry into HIV care: lessons from Brazil, 2003 to 2006

Background: To ascertain the population rates and proportion of late entry into HIV care, as well as to determine whether such late entry correlates with individual and contextual factors. Methods: Data for the 2003-2006 period in Brazil were obtained from public health records. A case of late entry into HIV care was defined as one in which HIV infection was diagnosed at death, one in which HIV infection was diagnosed after the condition of the patient had already been aggravated by AIDS-related diseases, or one in which the CD4(+) T-cell count was <= 200 cells/mm(3) at the time of diagnosis. We also considered extended and stricter sets of criteria (in which the final criterion was <= 350 cells/mm(3) and <= 100 cells/mm(3), respectively). The estimated risk ratio was used in assessing the effects of correlates, and the population rates (per 100,000 population) were calculated on an annual basis. Results: Records of 115,369 HIV-infected adults were retrieved, and 43.6% (50,358) met the standard criteria for late entry into care. Diagnosis at death accounted for 29% (14,457) of these cases. Late entry into HIV care (standard criterion) was associated with certain individual factors (sex, age, and transmission category) and contextual factors (region with less economic development/increasing incidence of AIDS, lower local HIV testing rate, and smaller municipal population). Use of the extended criteria increased the proportion of late entry by 34% but did not substantially alter the correlations analyzed. The overall population rate of late entry was 9.9/100,000 population, specific rates being highest for individuals in the 30-59 year age bracket, for men, and for individuals living in regions with greater economic development/higher HIV testing rates, collectively accounting for more than half of the cases observed. Conclusions: Although the high proportion of late entry might contribute to spreading the AIDS epidemic in less developed regions, most cases occurred in large cities, with broader availability of HIV testing, and in economically developed regions.

Differentiation of African Components of Ancestry to Stratify Groups in a Case-Control Study of a Brazilian Urban Population

Background: Balancing the subject composition of case and control groups to create homogenous ancestries between each group is essential for medical association studies. Methods: We explored the applicability of single-tube 34-plex ancestry informative markers (AIM) single nucleotide polymorphisms (SNPs) to estimate the African Component of Ancestry (ACA) to design a future case-control association study of a Brazilian urban sample. Results: One hundred eighty individuals (107 case group; 73 control group) self-described as white, brown-intermediate or black were selected. The proportions of the relative contribution of a variable number of ancestral population components were similar between case and control groups. Moreover, the case and control groups demonstrated similar distributions for ACA <0.25 and >0.50 categories. Notably a high number of outlier values (23 samples) were observed among individuals with ACA <0.25. These individuals presented a high probability of Native American and East Asian ancestral components; however, no individuals originally giving these self-described ancestries were observed in this study. Conclusions: The strategy proposed for the assessment of ancestry and adjustment of case and control groups for an association study is an important step for the proper construction of the study, particularly when subjects are taken from a complex urban population. This can be achieved using a straight forward multiplexed AIM-SNPs assay of highly discriminatory ancestry markers.

Bronchoscopy for the diagnosis of pulmonary tuberculosis in patients with negative sputum smear microscopy results

Objective: To evaluate the diagnostic accuracy of bronchoscopy in patients with clinical or radiological suspicion of tuberculosis who were unable to produce sputum or with negative sputum smear microscopy results. Methods: A prospective cross-sectional study involving 286 patients under clinical or radiological suspicion of having pulmonary tuberculosis and submitted to bronchoscopy-BAL and transbronchial biopsy (TBB). The BAL specimens were submitted to direct testing and culture for AFB and fungi, whereas the TBB specimens were submitted to histopathological examination. Results: Of the 286 patients studied, 225 (79%) were diagnosed on the basis of bronchoscopic findings, as follows: pulmonary tuberculosis, in 127 (44%); nonspecific chronic inflammation, in 51 (18%); pneumocystis, fungal infections, or nocardiosis, in 20 (7%); bronchiolitis obliterans organizing pneumonia, alveolites, or pneumoconiosis, in 14 (5%); lung or metastatic neoplasms, in 7 (2%); and nontuberculous mycobacterium infections, in 6 (2%). For the diagnosis of tuberculosis, BAL showed a sensitivity and a specificity of 60% and 100%, respectively. Adding the TBB findings significantly increased this sensitivity (to 84%), as did adding the post-bronchoscopy sputum smear microscopy results (total sensitivity, 94%). Minor post-procedure complications occurred in 5.6% of the cases. Conclusions: Bronchoscopy is a reliable method for the diagnosis of pulmonary tuberculosis, with low complication rates. The combination of TBB and BAL increases the sensitivity of the method and facilitates the differential diagnosis with other diseases.

Assessment of Pharmaceutical Equivalence: Difference Test or Equivalence Test?

Pharmaceutical equivalence is an important step towards the confirmation of similarity and Interchangeability among pharmaceutical products, particularly regarding those that win not be tested for bioequivalence. The aim of this paper is to compare traditional difference testing to two one-side equivalence tests in the assessment of pharmaceutical equivalence, by means of equivalence studies between similar, generic and reference products of acyclovir cream, atropine sulfate injection, meropenem for injection, and metronidazole injection. All tests were performed in accordance with the Brazilian Pharmacopeia or the United States Pharmacopeia. All four possible combinations of results arise in these comparisons of difference testing and equivalence testing. Most of the former did not show significant difference, whereas the latter presented similarity. We concluded that equivalence testing is more appropriate than difference testing, what can make it a useful tool to assess pharmaceutical equivalence in products that will not be tested for bioequivalence.

A study of multidrug-resistant tuberculosis in risk groups in the city of Santos, São Paulo, Brazil

Monitoring the extent of and trends in multidrug-resistant tuberculosis (MDR-TB) is a priority of the Brazilian National Tuberculosis Control Programme. The current study aimed to estimate the incidence of MDR-TB, describe the profile of TB drug resistance in risk groups and examine whether screening for MDR-TB adhered to the recommended guidelines. A descriptive study that examined diagnosed cases of pulmonary TB was conducted in the city of Santos, Brazil, between 2000-2004. Of the 2,176 pulmonary TB cases studied, 671 (30.8%) met the criteria for drug sensitivity testing and, of these cases, 31.7% (213/671) were tested. Among the tested cases, 9.4% were resistant to one anti-TB drug and 15% were MDR. MDR was observed in 11.6% of 86 new TB cases and 17.3% of 127 previously treated cases. The average annual incidence of MDR-TB was 1.9 per 100,000 inhabitants-years. The extent of known MDR-TB in the city of Santos is high, though likely to be underestimated. Our study therefore indicates an inadequate adherence to the guidelines for MDR-TB screening and suggests the necessity of alternative strategies of MDR-TB surveillance.

A video database for facial behavior understanding

[EN]The use of new technologies in order to step up the inter- action between humans and machines is the main proof that faces are important in videos. Therefore we suggest a novel Face Video Database for development, testing and veri cation of algorithms related to face- based applications and to facial recognition applications. In addition of facial expression videos, the database includes body videos. The videos are taken by three di erent cameras, working in real time, without vary- ing illumination conditions.