Multiscale modelling of stress and strain partitioning in high strength dual phase steels

Multiscale modelling of stress and strain partitioning in DP steel was carried out using both realistic microstructure-based RVE models as well as stochastic microstructures generated by Monte Carlo method. The stochastic microstructure models were shown to resemble that of realistic microstructures, enabling research on the specific aspects of the microstructure that could be difficult to control and study during experimental work. One such feature of the realistic microstructures studied in this work was the grain size and microstructure morphology. The microstructures were generated with varying average grain sizes while all other parameters, such as boundary conditions, material properties and volume fractions of martensite and ferrite were kept constant. It is found that the effect of grain size is much more pronounced during the initial localisation of the plastic deformation at and around the interface of the phases. In addition, the decrease in ductility and increase in strength of the DP steels are directly related to the refinement of grain sizes of each phase and the stress-strain partitioning in between them.

Anodal tDCS applied during strength training enhances motor cortical plasticity

Purpose:
The objective of this study was to assess the effect of anodal transcranial direct current stimulation (a-tDCS) on voluntary dynamic strength and cortical plasticity when applied during a 3-wk strength training program for the wrist extensors.

Methods:
Thirty right-handed participants were randomly allocated to the tDCS, sham, or control group. The tDCS and sham group underwent 3 wk of heavy-load strength training of the right wrist extensors, with 20 min of a-tDCS (2 mA) or sham tDCS applied during training (double blinded). Outcome measures included voluntary dynamic wrist extension strength, muscle thickness, corticospinal excitability, short-interval intracortical inhibition (SICI), and silent period duration.

Results:
Maximal voluntary strength increased in both the tDCS and sham groups (14.89% and 11.17%, respectively, both P < 0.001). There was no difference in strength gain between the two groups (P = 0.229) and no change in muscle thickness (P = 0.15). The tDCS group demonstrated an increase in motor-evoked potential amplitude at 15%, 20%, and 25% above active motor threshold, which was accompanied by a decrease in SICI during 50% maximal voluntary isometric contraction and 20% maximal voluntary isometric contraction (all P < 0.05). Silent period decreased for both the tDCS and sham groups (P < 0.001).

Conclusion:
The application of a-tDCS in combination with strength training of the wrist extensors in a healthy population did not provide additional benefit for voluntary dynamic strength gains when compared with standard strength training. However, strength training with a-tDCS appears to differentially modulate cortical plasticity via increases in corticospinal excitability and decreases in SICI, which did not occur following strength training alone

Associations between neighbourhood and household environmental variables and fruit consumption : exploration of mediation by individual cognitions and habit strength in the GLOBE study

Objective The present study examined associations of several home and neighbourhood environmental variables with fruit consumption and explored whether these associations were mediated by variables derived from the Theory of Planned Behaviour (TPB) and by habit strength.

Design Data of the Dutch GLOBE study on household and neighbourhood environment, fruit intake and related factors were used, obtained by self-administered questionnaires (cross-sectional), face-to-face interviews and audits.

Setting The city of Eindhoven in the Netherlands

Subjects Adults (n 333; mean age 58 years, 54 % female).

Results Multiple mediation analyses were conducted using regression analyses to assess the association between environmental variables and fruit consumption, as well as mediation of these associations by TPB variables and by habit strength. Intention, perceived behaviour control, subjective norm and habit strength were associated with fruit intake. None of the neighbourhood environmental variables was directly or indirectly associated with fruit intake. The home environmental variable ‘modelling behaviour by family members’ was indirectly, but not directly, associated with fruit intake. Habit strength and perceived behaviour control explained most of the mediated effect (71·9 %).

Conclusions Modelling behaviour by family members was indirectly associated with fruit intake through habit strength and perceived behaviour control. None of the neighbourhood variables was directly or indirectly, through any of the proposed mediators, associated with adult fruit intake. These findings suggest that future interventions promoting fruit intake should address a combination of the home environment (especially modelling behaviour by family members), TPB variables and habit strength for fruit intake.

Corticospinal excitability following short-term motor imagery training of a strength task

Motor imagery and actual movement engage similar neural structures, however, whether they produce similar training-related corticospinal adaptations has yet to be established. The aim of this study was to compare changes in strength and corticospinal excitability following short-term motor imagery strength training and short-term strength training. Transcranial magnetic stimulation (TMS) was applied over the contralateral motor cortex (M1) to elicit motor-evoked potentials in the dominant biceps brachii muscle prior to and following 3-week strength training using actual bicep curls or motor imagery of bicep curls. The strength training (n = 6) and motor imagery (n = 6) groups underwent three supervised training sessions per week for 3 weeks. Participants completed four sets of six to eight repetitions (actual or imagined) at a training load of 80% of their one-repetition maximum. The control group (n = 6) were required to maintain their current level of physical activity. Both training groups exhibited large performance gains in strength (p < 0.001; strength training 39% improvement, imagery 16% improvement), which were significantly different between groups (p = 0.027). TMS revealed that the performance improvements observed in both imagery and strength training were accompanied by increases in corticospinal excitability (p < 0.001), however, these differences were not significantly different between groups (p = 0.920). Our findings suggest that both strength training and motor imagery training utilised similar neural substrates within the primary M1, however, strength training resulted in greater gains in strength than motor imagery strength training. This difference in strength increases may be attributed to adaptations during strength training that are not confined to the primary M1. These findings have theoretical implications for functional equivalent views of motor imagery as well as important therapeutic implications.

Addressing retained austenite stability in advanced high strength steels

Advances in the development of new high strength steels have resulted in microstructures containing significant volume fractions of retained austenite. The transformation of retained austenite to martensite upon straining contributes towards improving the ductility. However, in order to gain from the above beneficial effect, the volume fraction, size, morphology and distribution of the retained austenite need to be controlled. In this regard, it is well known that carbon concentration in the retained austenite is responsible for its chemical stability, whereas its size and morphology determines its mechanical stability. Thus, to achieve the required mechanical properties, control of the processing parameters affecting the microstructure development is essential.

The effect of Mn-rich precipitates on the strength of AZ31 extrudates

The commercial magnesium alloy AZ31 has been subjected to a range of solution treatment regimes. These have then been extruded and their microstructure, texture, and precipitate populations characterized along with their mechanical properties. During the solution treatment, Mn-enriched particles develop and these remain largely unchanged throughout subsequent processing steps. A direct link between grain size and texture has been found, with coarser-grained specimens showing sharper textures. VPSC modeling has been used to quantify the effect of texture on the tensile yield strength, and it has been found that sharper textures have larger tensile yield strengths. Since coarser grain sizes have reduced Hall–Petch hardening, but have an additional texture-strengthening component, a region on the Hall–Petch plot for tension has been identified in which there is an insensitivity of strength to grain size. This has been quantitatively modeled and a texture-modified Hall–Petch plot for tension has been developed. The Mn-rich particles have also been shown to provide precipitate strengthening to the alloy of up to 40 MPa. The compressive behavior was clearer, with the compressive yield strength being directly correlated to grain size and unaffected by texture or precipitation hardening.

On self-propagating methodological flaws in performance normalization for strength and power sports

Performance in strength and power sports is greatly affected by a variety of anthropometric factors. The goal of performance normalization is to factor out the effects of confounding factors and compute a canonical (normalized) performance measure from the observed absolute performance. Performance normalization is applied in the ranking of elite athletes, as well as in the early stages of youth talent selection. Consequently, it is crucial that the process is principled and fair. The corpus of previous work on this topic, which is significant, is uniform in the methodology adopted. Performance normalization is universally reduced to a regression task: the collected performance data are used to fit a regression function that is then used to scale future performances. The present article demonstrates that this approach is fundamentally flawed. It inherently creates a bias that unfairly penalizes athletes with certain allometric characteristics, and, by virtue of its adoption in the ranking and selection of elite athletes, propagates and strengthens this bias over time. The main flaws are shown to originate in the criteria for selecting the data used for regression, as well as in the manner in which the regression model is applied in normalization. This analysis brings into light the aforesaid methodological flaws and motivates further work on the development of principled methods, the foundations of which are also laid out in this work.

Atomic scale investigation of solutes and precipitates in high strength steels

Two steels, ferritic, high strength with interphase precipitation and nano-bainitic, were used to show the advances in and application of atom probe. The coexistence of the nano-scale, interphase Nb-Mo-C clusters and stoichiometric MC nano particles was found in the high strength steel after thermomechanical processing. Moreover, the segregation of carbon at different heterogeneous sites such as grain boundary that reduces the solute element available for fine precipitation was observed. The APT study of the solutes redistribution between the retained austenite and bainitic ferrite in the nano-bainitic steel revealed: (i) the presence of two types of the retained austenite with higher and lower carbon content and (ii) segregation of carbon at the local defects such as dislocations in the bainitic ferrite during the isothermal hold.