The effect of cure cycle heating rate on the fibre/matrix interface

Development of civil aerospace composites is key to future “greener” aircraft. Aircraft manufacturers must improve efficiency of their product and manufacturing processes to remain viable. The aerospace industry is undergoing a materials revolution in the design and manufacture of composite airframes. The Airbus A350 and Boeing 787 (both due to enter service in the latter part of this decade) will push utilisation levels of  composite materials beyond 50% of the total airframe by weight. This  change requires massive investment in materials technology, manufacturing capability and skills development. The Quickstep process provides the ability to rapidly cure aerospace standard composite materials whilst providing enhanced mechanical properties. Utilising fluid to transfer heat to the   composite component during the curing process allows far higher heat rates than with conventional cure techniques. The rapid heat-up rates reduce the viscosity of the resin system greatly to provide a longer processing window introducing greater flexibility and removing the need for high pressure during cure. Interlaminar fracture toughness (Mode I) and Interfacial Shear Strength of aerospace standard materials cured using Quickstep have been    compared to autoclave cured laminates. Results suggest an improvement in fibre-matrix adhesion.

Effect of glycerol-induced hyperhydration on thermoregulation and metabolism during exercise in the heat

This study examined the effect of glycerol ingestion on fluid homeostasis, thermoregulation, and metabolism during rest and exercise. Six endurance-trained men ingested either 1 g glycerol in 20 ml H₂O.kg^-1 body weight (bw) (GLY) or 20 ml H₂O.kg^-1bw (CON) in a randomized double-blind fashion, 120 min prior to undertaking 90 min of steady state cycle exercise (SS) at 98 % of lactate threshold in dry heat (35 degrees C, 30 % RH), with ingestion of CHO-electrolyte beverage (6 % CHO) at 15-min intervals. A 15-min cycle, where performance was quantified in kJ, followed (PC). Pre-exercise urine volume was lower in GLY than CON (1119 ± 97 vs. 1503 ± 146 ml· 120 min^-1; p < .05). Heart rate was lower (p < .05) throughout SS in GLY, while forearm blood flow was higher (17.1 ± 1.5 vs. 13.7 ± 3.0 ml.100 g tissue·min^-1; p < .05) and rectal  temperature lower (38.7 ± 0.1 vs. 39.1 ± 0.1 ° C; p < .05) in GLY late in SS. Despite these changes, skin and muscle temperatures and circulating catecholamines were not different between trials. Accordingly, no differences were observed in muscle glycogenolysis, lactate accumulation, adenine nucleotide, and phosphocreatine degradation or inosine 5'-monophosphate accumulation when comparing GLY with CON. Of note, the work performed during PC was 5 % greater in GLY (252 ± 10 vs. 240 ± 9 kJ; p < .05). These results demonstrate that glycerol, when ingested with a bolus of water 2 hours prior to exercise, results in fluid retention, which is capable of reducing cardiovascular strain and enhancing thermoregulation. Furthermore, this practice increases exercise performance in the heat by mechanisms other than alterations in muscle metabolism.

The effect of fabric strain during pressure steaming on fabric dimensional properties

It is shown that tension applied to fabric which is then permanently set by steaming under pressure for a short time has a significant effect on fabric dimensional properties. Increasing levels of stretch applied to fabric before pressure steaming resulted in decreases in fabric hygral expansion and relaxation shrinkage and also lowered fabric shrinkage that resulted from permanent setting. The setting conditions resembled those used in conventional pressure decatising, and it is suggested that in batch decatising, precise control of the length and width of fabric as it is batched up with the wrapper before steaming under pressure could enable predictable changes in fabric dimensions, relaxation shrinkage and hygral expansion to be obtained.

Effect of hydrogen/air flow rates and scan rate on the flame ionisation detection response of phopholipids, and their quantitative and qualitative analysis by Iatroscan (Mark‐6s) TLC‐FID

The combined effect of scan speed, hydrogen and air flow rates on the flame ionization detection (FID) peak response of phospholipid classes has been studied to determine the optimum levels of these parameters. The phospholipid composition of different types of commercial lecithins, as well as lecithins combined with fish oils, has been analyzed by Iatroscan TLC‐FID Mark‐6s under optimized conditions. An air flow rate of 2 L/min, a hydrogen flow rate of 150–160 mL/min, and a scan speed of 30 s/rod seem to be the ideal conditions for scanning phospholipids with complete pyrolysis in the flame in the Mark‐6 model. Increasing the scan speed rapidly decreased the FID response. A hydrogen flow rate as high as 170 mL/min could be used at relatively low air flow rates (&#x003C2 L/min) and the response declined when both air flow rate and hydrogen flow rate increased simultaneously. Both linear and curvilinear relationships had highly significant correlations (p&#x003C0.01) with the sample load. Time course reactions, including the hydrolysis of phosphatidylserine using enzymes, can be successfully monitored by the Iatroscan TLC‐FID Chromarod system.

Effect of morphine on the growth rate of Calliphora stygia (Fabricius) (Diptera : Calliphoridae) and possible implications for forensic entomology

Insect specimens collected from decomposing bodies enable forensic entomologists to estimate the minimum post-morten interval (PMI). Drugs and toxins within a corpose may affect the development rate of insects that feed on them and it is vital to quantify these effects to accurately calculate minimum PMI.... This suggests that C. sygia is a reliable model to use to accurately age a corpse containing morphine at any of the concentrations investigated.

Effect of cold drawing on subsequent surface strain path and ductility during upsetting

Cold drawing is a process that sizes and smooths the surface of steel before it is cold headed to produce bolts. The effect of the changes in the mechanical properties due to cold drawing on the surface strain and ductility during the upsetting process was analysed showing that the stress and strain state can be more readily altered by changes in the process conditions (friction and height-to-diameter ratio) to cause greater increase in the failure strains than can be achieved by pre-drawing.

A factor-augmented VAR approach : the effect of a rise in the US personal income tax rate on the US and Canada

In this paper a factor-augmented vector autoregressive (FAVAR) model is estimated to characterize the dynamic effects of shocks in the personal income tax rate in the United States on United States and Canadian economies. The representation and the estimate of the FAVAR model is based on Stock and Watson (2005) and the shocks are recovered applying the identification scheme proposed by Bernanke et al. (2005); this method allows impulse response functions to be generated for all the variables in the dataset and provides a description of the domestic and international transmission mechanisms of United States movements in the personal income tax rate. A distinguishing feature of our model is the disaggregation of traded goods sector where imports and exports are disaggregated into 12 and 13 industries, respectively. This provides extra information on the domestic and international transmission mechanism across the two countries. The results show that the FAVAR approach generates a reasonable characterisation of the effects of United States movements in the US personal income tax rate on the United States economy and its transmission to the Canadian economy.

It's the economy : the effect of macroeconomic variables of the rate of suicide

Background. There are a large number of factors mediating suicide. Many studies have searched for a direct causal relationship between economic hardship and suicide, however, findings have been varied.

Method. Suicide data was obtained from the Australian Bureau of Statistics for the period between January 1968 and August 2002. These were correlated with a suite of macroeconomic data including housing loan interest rates, unemployment rates, days lost to industrial disputes, Consumer Price Index, gross domestic product, and the Consumer Sentiment Index.

Results. A total of 51 845 males and 16 327 females committed suicide between these dates. There were significant associations between suicide rates and eleven macroeconomic indicators for both genders in at least one age range. Data was divided into male and female and five age ranges and pooled ages. Analyses were conducted on these 132 datasets resulting in 80 significant findings. The data was generally stronger for indices measuring economic performance than indices measuring consumers’ perceptions of the state of the economy. A striking difference between male and female trends was seen. Generally, male suicide rates increased with markers of economic adversity, while the opposite pattern was seen in females. There were significantly different patterns in age-stratified data, with for example higher housing loan interest rates having a positive association with suicide in younger people and a negative association in older age groups.

Conclusion. Macroeconomic trends are significantly associated with suicide. The patterns in males and females are very different, and there are further substantial age-related differences.

Drug release rate and anti-microbial effect of controlled-diffusion biopolymer membranes

In this study, a series of fibrous membranes made from cellulose acetate (CA) and polyester urethane (PEU) by co-electrospining or blend-electrospining were evaluated for drug release kinetics, in vitro anti-microbial activity and in vivo would healing performance when used as wound dressings. To stop common clinical infections, an antibacterial agent, Polyhexamethylene Biguanide (PHMB) was incorporated into e-spun fibres. The presence of CA in the wound healing membrane was found to improve hydrophilicity and permeability to air and moisture. The in vivo tests indicated that the addition of PHMB and CA considerably improved the wound healing efficiency. CA fibres became slightly swollen upon contacting with the wound exudates. It can not only speed up the liquid evaporation but also create a moisture environment for wound recovery. The drug release dynamics of membranes was controlled by the structure of membranes and component rations within membranes. The lower ration of CA:PEU retained the sound mechanical properties of membranes, and also reduced the boost release effectively and slowed down diffusion of antibacterial agent during in vitro tests. The controlled-diffusion membranes exert long-term anti-infective effect.

Effect of questionnaire length, personalisation and reminder type on response rate to a complex postal survey : randomised controlled trial

Background: Minimising participant non-response in postal surveys helps to maximise the generalisability of the inferences made from the data collected. The aim of this study was to examine the effect of questionnaire length, personalisation and reminder type on postal survey response rate and quality and to compare the costeffectiveness of the alternative survey strategies.
Methods: In a pilot study for a population study of travel behaviour, physical activity and the environment, 1000 participants sampled from the UK edited electoral register were randomly allocated using a 2 × 2 factorial design to receive one of four survey packs: a personally addressed long (24 page) questionnaire pack, a personally addressed short (15 page) questionnaire pack, a non-personally addressed long questionnaire pack or a nonpersonally addressed short questionnaire pack. Those who did not return a questionnaire were stratified by initial randomisation group and further randomised to receive either a full reminder pack or a reminder postcard. The effects of the survey design factors on response were examined using multivariate logistic regression.
Results: An overall response rate of 17% was achieved. Participants who received the short version of the questionnaire were more likely to respond (OR = 1.48, 95% CI 1.06 to 2.07). In those participants who received a reminder, personalisation of the survey pack and reminder also increased the odds of response (OR = 1.44, 95% CI 1.01 to 1.95). Item non-response was relatively low, but was significantly higher in the long questionnaire than the short (9.8% vs 5.8%; p = .04). The cost per additional usable questionnaire returned of issuing the reminder packs was £23.1 compared with £11.3 for the reminder postcards.
Conclusions: In contrast to some previous studies of shorter questionnaires, this trial found that shortening a relatively lengthy questionnaire significantly increased the response. Researchers should consider the trade off between the value of additional questions and a larger sample. If low response rates are expected, personalisation may be an important strategy to apply. Sending a full reminder pack to non-respondents appears a worthwhile, albeit more costly, strategy.

Differential effect of inbred mouse strain (C57BL/6, DBA/2, 129T2) on insulin secretory function in response to a high fat diet

The increasing production of genetically-modified mouse models has necessitated studies to determine the inherent physiological characteristics of commonly used mouse strains. In this study we examined insulin secretory function in response to an intravenous bolus of glucose or glucose plus arginine in anesthetized C57BL/6, DBA/2 and 129T2 mice fed either a control or high fat diet for 6 weeks. The results show that 129T2 mice had higher fasting plasma glucose levels and lower fasting plasma insulin levels compared with C57BL/6 and DBA/2 mice regardless of diet. Furthermore, 129T2 mice were glucose intolerant and secreted significantly less insulin in response to glucose and glucose plus arginine irrespective of diet compared with the other two strains of mice. DBA/2 mice hypersecreted insulin in response to glucose and glucose plus arginine compared with C57BL/6 and 129T2 mice. Moreover while first phase insulin secretion was appropriately increased in response to the high fat diet in C57BL/6 and 129T2 mice, this was not the case for DBA/2 mice. Mean islet area was decreased in response to a high fat diet in DBA/2 mice, while there was no dietary effect on the other two strains. This study highlights the inherent genetic differences that exist among seemingly normal strains of mice that are commonly used to make transgenic and knockout mice. Understanding these differences will provide researchers with the information to choose the appropriate genetic background on which to express their particular genetic alteration.

Effect of tensile pre-strain on bending and unloading of automotive steels

In recent years, advanced high strength steels (AHSS) have been used in a wide range of automotive applications; they may have property variations through the thickness and the properties may also be dependent of prior processing including pre-straining. In order to model forming processes precisely using, for example, finite element analysis, it is important that material input data should adequately reflect these effects. It is known that shape defects in roll forming are related to small strains in material that has undergone prior deformation in a different strain path. Much research has already been performed on the change in the Young’s Modulus once a steel sheet has been plastically deformed,however many of these tests have only been conducted using tensile testing, and therefore may not take into account differences in compressive and tensile unloading. This research investigates the effect of tensile pre-straining on bending behaviour for various types of material;in bending, one half of the sheet will load and unload in compression and hence experience deformation under a reversed stress. Four different materials were pre-strained in tension with 1%, 3%, 7%, 11% and 25% elongation. Using a free bending test, moment curvature diagrams were obtained for bending and unloading. The results showed that the characteristics of the moment curvature diagram depended on the degree of pre-straining; more highly strained samples showed an earlier elastic-plastic transformation and a decreased Young's Modulus during unloading. This was compared to previous literature results using only tensile tests. Our results could influence the modeling of springback in low tension sheet operations, such as roll forming.