Proposta de controlador de carga com MPPT utilizando LabVIEW

This paper presents one proposal of the energy management's model system using photovoltaic panels. The module proposed seeks to monitor photovoltaic panels, which have intermittency in power generation caused by environmental or load conditions, in order to control the coupling between the panel and the load - through the charge controller, of aiming that the panel's operation will be always on the maximum power transfer point as possible. For this, it used the maximum power point tracking technique - MPPT, implemented in LabVIEW software, also utilizing the data acquisition card NI myDAQ. In addition, it was implemented the controller access remote module, from the sharing of network data, so the panels performance can be through a tablet, monitored and controlled with no need for direct contact with the Supervisory server

Sistema autônomo de iluminação utilizando energia solar

This work presents a self-sustainable lighting system using ultracapacitor as a storage device, replacing the conventional battery, using solar energy as the only energy supplier. A detailed study of solar panels, switched mode converters and ultracapacitors was made, in order to design a circuit capable of capturing solar energy and transfer it efficiently to a bank of ultracapacitors. Later, at nighttime, this energy is used for lighting in LED luminaires which have high luminous efficiency and high reliability index. This work presents the design of the solar panel, ultracapacitors bank, the development of the voltage converter circuit and charger working at the maximum power point of the solar panel. All subsystems were simulated and it was shown that the use of ultracapacitors is feasible to feed a LED lamp with enough brightness for a person to walk at night, for two night shifts, using a capacitive bank with twenty-four ultracapacitors. Replacing the battery by an ultracapacitor allows a faster recharge, with low maintenance costs, since ultracapacitors have a lifetime bigger than batteries; beyond reducing the environmental impact, as they don't use potentially toxic chemical compounds

Analysis Methodology for Vortex-Induced Motion (VIM) of a Monocolumn Platform Applying the Hilbert-Huang Transform Method

Vortex-induced motion (VIM) is a highly nonlinear dynamic phenomenon. Usual spectral analysis methods, using the Fourier transform, rely on the hypotheses of linear and stationary dynamics. A method to treat nonstationary signals that emerge from nonlinear systems is denoted Hilbert-Huang transform (HHT) method. The development of an analysis methodology to study the VIM of a monocolumn production, storage, and offloading system using HHT is presented. The purposes of the present methodology are to improve the statistics analysis of VIM. The results showed to be comparable to results obtained from a traditional analysis (mean of the 10% highest peaks) particularly for the motions in the transverse direction, although the difference between the results from the traditional analysis for the motions in the in-line direction showed a difference of around 25%. The results from the HHT analysis are more reliable than the traditional ones, owing to the larger number of points to calculate the statistics characteristics. These results may be used to design risers and mooring lines, as well as to obtain VIM parameters to calibrate numerical predictions. [DOI: 10.1115/1.4003493]

Morphology and Anatomy of Stem Mines in Cipocereus minensis (Wender.) Ritter (Cactaceae), an Endemic Species to Eastern Brazil

Plant mines are structures with the form of a cavity caused by consumption of host plant tissue by the insect's miner larvae. Plant mines are more common in leaves, but in Cipocereus minensis, a species in which the leaves are modified spines, the miner activity is restricted to the stem. The aim of this paper was to document the morphological and anatomical differences in the infected and uninfected stems of C. minensis due to the feeding habit of the mining agent. Fresh tissue samples of non-mined and mined young stem of C minensis were collected and examined in transverse sections. We hypothesize that the infection begins following mating when the females scratch the surface of the stem or while they feed on fruits and lay eggs, which subsequently develop into larvae, invading the cactus stem. The insect's miner larvae had mostly consumed the parenchyma tissue towards the center of the stem, and periderm formed along the entire path of the insect. This meristematic tissue or "wound periderm" is a common response for compartmentalization to isolate the damaged tissue, in this case the incubating chamber, in which the eggs will be placed. There were no signs of consumption of vascular tissue in the infested samples, further suggesting a compartmentalized infestation. The nest chamber was found in the stem pith region, with periderm surrounding an insect's miner pupa inside identified as a member of the Cerambycidae. The mining insect depends on a host plant to complete the life cycle; however, the nature of this partnership and the long-term effects of the insect on the plant tissue are unknown. The complex mechanisms by which herbivorous insects control the morphogenesis of the plant host are discussed. We propose that C. minensis has a recognition system to identify insect attack and evaluate the effectiveness of early response triggering compartmentalized defense mechanisms by protecting the injured area with a new layer of periderm.

Relationship between global structural parameters and Enzyme Commission hierarchy: Implications for function prediction

In protein databases there is a substantial number of proteins structurally determined but without function annotation. Understanding the relationship between function and structure can be useful to predict function on a large scale. We have analyzed the similarities in global physicochemical parameters for a set of enzymes which were classified according to the four Enzyme Commission (EC) hierarchical levels. Using relevance theory we introduced a distance between proteins in the space of physicochemical characteristics. This was done by minimizing a cost function of the metric tensor built to reflect the EC classification system. Using an unsupervised clustering method on a set of 1025 enzymes, we obtained no relevant clustering formation compatible with EC classification. The distance distributions between enzymes from the same EC group and from different EC groups were compared by histograms. Such analysis was also performed using sequence alignment similarity as a distance. Our results suggest that global structure parameters are not sufficient to segregate enzymes according to EC hierarchy. This indicates that features essential for function are rather local than global. Consequently, methods for predicting function based on global attributes should not obtain high accuracy in main EC classes prediction without relying on similarities between enzymes from training and validation datasets. Furthermore, these results are consistent with a substantial number of studies suggesting that function evolves fundamentally by recruitment, i.e., a same protein motif or fold can be used to perform different enzymatic functions and a few specific amino acids (AAs) are actually responsible for enzyme activity. These essential amino acids should belong to active sites and an effective method for predicting function should be able to recognize them. (C) 2012 Elsevier Ltd. All rights reserved.

Comparison of microsatellites and isozymes in genetic diversity studies of Oryza glumaepatula (Poaceae) populations

The study of the genetic structure of wild plant populations is essential for their management and conservation. Several DNA markers have been used in such studies, as well as isozyme markers. In order to provide a better comprehension of the results obtained and a comparison between markers which will help choose tools for future studies in natural populations of Oryza glumaepatula, a predominantly autogamous species, this study used both isozymes and microsatellites to assess the genetic diversity and genetic structure of 13 populations, pointing to similarities and divergences of each marker, and evaluating the relative importance of the results for studies of population genetics and conservation. A bulk sample for each population was obtained, by sampling two to three seeds of each plant, up to a set of 50 seeds. Amplified products of eight SSR loci were electrophoresed on non-denaturing polyacrylamide gels, and the fragments were visualized using silver staining procedure. Isozyme analyses were conducted in polyacrylamide gels, under a discontinuous system, using six enzymatic loci. SSR loci showed higher mean levels of genetic diversity (A=2.83, p=0.71, A(P)=3.17, H-o=0.081, H-e=0.351) than isozyme loci (A=1.20, p=0.20, A(P)=1.38, H-o=0.006, H-e=0.056). Interpopulation genetic differentiation detected by SSR loci (R-ST=0.631, equivalent to F-ST=0.533) was lower than that obtained with isozymes (F-ST=0.772). However, both markers showed high deviation from Hardy-Weinberg expectations (F-IS=0.744 and 0.899, respectively for SSR and isozymes). The mean apparent outcrossing rate for SSR ((t) over bar (a)=0.14) was higher than that obtained using isozymes ((t) over bar (a)=0.043), although both markers detected lower levels of outcrossing in Amazonia compared to the Pantanal. The migrant number estimation was also higher for SSR (Nm=0.219) than isozymes (Nm=0.074), although a small number for both markers was expected due to the mode of reproduction of this species, defined as mixed with predominance of self fertilization. No correlation was obtained between genetic and geographic distances with SSR, but a positive correlation was found between genetic and geographic distances with isozymes. We conclude that these markers are divergent in detecting genetic diversity parameters in O. glumaepatula and that microsatellites are powerful for detecting information at the intra-population level, while isozymes are more powerful for inter-population diversity, since clustering of populations agreed with the expectations based on the geographic distribution of the populations using this marker. Rev. Biol. Trop. 60 (4): 1463-1478. Epub 2012 December 01.

Cochlear implanted children present vocal parameters within normal standards

Objective: to compare acoustic and perceptual parameters regarding the voice of cochlear implanted children, with normal hearing children. Method: this is a cross-sectional, quantitative and qualitative study. Methods: Thirty six cochlear implanted children aged between 3y and 3 m to 5y and 9 m and 25 children with normal hearing, aged between 3y and 11 m and 6y and 6 m, participated in this study. The recordings and the acoustics analysis of the sustained vowel/a/and spontaneous speech were performed using the PRAAT program. The parameters analyzed for the sustained vowel were the mean of the fundamental frequency, jitter, shimmer and harmonic-to-noise ratio (HNR). For the spontaneous speech, the minimum and maximum frequencies and the number of semitones were extracted. The perceptual analysis of the speech material was analyzed using visual-analogical scales of 100 points, composing the aspects related to the overall severity of the vocal deviation, roughness, breathiness, strain, pitch, loudness and resonance deviation, and instability. This last parameter was only analyzed for the sustained vowel. Results: The results demonstrated that the majority of the vocal parameters analyzed in the samples of the implanted children disclosed values similar to those obtained by the group of children with normal hearing. Conclusion: implanted children who participate in a (re) habilitation and follow-up program, can present vocal characteristics similar to those vocal characteristics of children with normal hearing. (C) 2012 Elsevier Ireland Ltd. All rights reserved.

Alocação eficiente de indicadores de faltas em um sistema de distribuição real usando computação evolutiva

Este trabalho propõe uma abordagem computacional evolutiva para a resolução do problema de alocação de dispositivos indicadores de faltas (IFs) em alimentadores primários de distribuição de energia elétrica. De forma mais específica, o problema de se obter o melhor local de instalação é solucionado por meio da técnica de Algoritmos Genéticos (AGs) que busca obter uma configuração eficiente de instalação de IFs no tronco principal de um alimentador de distribuição. Assim, faz-se a modelagem do mesmo na forma de um problema de otimização orientado à melhoria dos indicadores de qualidade do serviço e ao encontro de uma solução economicamente atraente. Os resultados com dados reais comprovam a eficiência da metodologia proposta.

Falhas de mercado e redes em políticas públicas: desafios e possibilidades ao Sistema Único de Saúde

Os princípios e as diretrizes do Sistema Único de Saúde (SUS) impõem uma estrutura de assistência baseada em redes de políticas públicas que, combinada ao modelo de financiamento adotado, conduz a falhas de mercado. Isso impõe barreiras à gestão do sistema público de saúde e à concretização dos objetivos do SUS. As características institucionais e a heterogeneidade dos atores, aliadas à existência de diferentes redes de atenção à saúde, geram complexidade analítica no estudo da dinâmica global da rede do SUS. Há limitações ao emprego de métodos quantitativos baseados em análise estática com dados retrospectivos do sistema público de saúde. Assim, propõe-se a abordagem do SUS como sistema complexo, a partir da utilização de metodologia quantitativa inovadora baseada em simulação computacional. O presente artigo buscou analisar desafios e potencialidades na utilização de modelagem com autômatos celulares combinada com modelagem baseada em agentes para simulação da evolução da rede de serviços do SUS. Tal abordagem deve permitir melhor compreensão da organização, heterogeneidade e dinâmica estrutural da rede de serviços do SUS e possibilitar minimização dos efeitos das falhas de mercado no sistema de saúde brasileiro.

Modelagem para o dimensionamento de um sistema de microirrigação utilizando microtubos ramificados

Este trabalho foi realizado com o objetivo de se modelar e avaliar o comportamento hidráulico de microtubos ramificados, com base na relação entre vazão e comprimento dos microtubos para uma pressão de entrada, operando sob regime laminar. Dois modelos matemáticos foram estudados, em que um considerou a perda localizada de carga no dimensionamento dos microtubos ramificados e o outro a desconsiderou. O experimento para validação dos modelos foi conduzido no Laboratrio de Hidráulica da Escola Superior de Agricultura "Luiz de Queiroz" (ESALQ-USP), Piracicaba, SP, medindo-se a vazão dos emissores para as pressões de 14,7; 18,6; 39,2 e 58,9 kPa. A configuração do sistema de irrigação consistiu de uma linha lateral com diâmetro nominal (DN) de 10,0 mm, na qual foram inseridos microtubos conectores com DN de 0,8 mm conectados a um segmento de tubo de derivação e acoplados seis microtubos emissores com DN de 0,7 mm. Verificou-se que, dentre os modelos matemáticos, aquele que considerou a perda localizada de carga apresentou maior exatidão pois teve elevado, um bom índice de Willmott e baixo erro quadrático médio.

Loudness scattering due to vibro-acoustic model variability

The use of numerical simulation in the design and evaluation of products performance is ever increasing. To a greater extent, such estimates are needed in a early design stage, when physical prototypes are not available. When dealing with vibro-acoustic models, known to be computationally expensive, a question remains, which is related to the accuracy of such models in view of the well-know variability inherent to the mass manufacturing production techniques. In addition, both academia and industry have recently realized the importance of actually listening to a products sound, either by measurements or by virtual sound synthesis, in order to assess its performance. In this work, the scatter of significant parameter variations on a simplified vehicle vibro-acoustic model is calculated on loudness metrics using Monte Carlo analysis. The mapping from the system parameters to sound quality metric is performed by a fully-coupled vibro-acoustic finite element model. Different loudness metrics are used, including overall sound pressure level expressed in dB and Specific Loudness in Sones. Sound quality equivalent sources are used to excite this model and the sound pressure level at the driver's head position is acquired to be evaluated according to sound quality metrics. No significant variation has been perceived when evaluating the system using regular sound pressure level expressed in in dB and dB(A). This happens because of the third-octave filters that averages the results under some frequency bands. On the other hand, Zwicker Loudness presents important variations, arguably, due to the masking effects.

Gestión de vídeo distribuido

[ES] El principal objetivo de este Trabajo Final de Grado (TFG) fue la creación de un sistema de gestión de vídeo distribuido utilizando cámaras de videovigilancia IP. Esta propuesta surgió a partir de la idea de ofrecer un acceso simultáneo, tanto online como offline, a las secuencias de vídeo generadas por una red de cámaras IP en un entorno dado. El resultado obtenido fue una infraestructura software ampliable  que ofrece al usuario una serie de funcionalidades con cámaras de red, abstrayéndolo de detalles internos. El trabajo está compuesto por tres elementos claramente diferenciados: integración de cámaras IP, almacenamiento en vídeo y creación del sistema de vídeo distribuido. La integración de cámaras IP tiene como objetivo comunicar al equipo con la cámara de red para la obtención del flujo de imágenes que transmite. Dicha comunicación se establece vía HTTP (Hypertext Transfer Protocol) gracias a la interfaz de programación (API) de la que disponen estos dispositivos. El segundo elemento, el almacenamiento en vídeo, tiene como función guardar las imágenes de la cámara IP en archivos de vídeo. De esta manera se ofrece su posterior visualización en diferido. Finalmente, el sistema de vídeo distribuido permite la reproducción simultánea de múltiples vídeos grabados por la red de cámaras IP. Adicionalmente, vídeos grabados por otros dispositivos también son admitidos. El material desarrollado dispone del potencial necesario para convertirse en una herramienta libre de amplio uso en sistemas UNIX para cámaras IP, así como suponer la base de futuros proyectos relacionados con estos dispositivos.

Desarrollo de una aplicación que facilita la enseñanza y el estudio del póker en su variante Texas Hold'em

[ES] PokerTrainer es una aplicación para dispósitivos móviles con Android como sistema operativo. Está dirigida a aquellos jugadores de póker en su variante Texas Hold'em que quieran aprender ciertos conceptos básicos que les van a ayudar a mejorar su juego. Se basa en la gamificación mediante un sistema de quiz de contenidos teóricos referidos al póker.

Smile detection for user interfaces

[EN]Perceptual User Interfaces (PUIs) aim at facilitating human-computer interaction with the aid of human-like capacities (computer vision, speech recognition, etc.). In PUIs, the human face is a central element, since it conveys not only identity but also other important information, particularly with respect to the user’s mood or emotional state. This paper describes both a face detector and a smile detector for PUIs. Both are suitable for real-time interaction.

Progetto di reti Sensori Wireless e tecniche di Fusione Sensoriale

Ambient Intelligence (AmI) envisions a world where smart, electronic environments are aware and responsive to their context. People moving into these settings engage many computational devices and systems simultaneously even if they are not aware of their presence. AmI stems from the convergence of three key technologies: ubiquitous computing, ubiquitous communication and natural interfaces. The dependence on a large amount of fixed and mobile sensors embedded into the environment makes of Wireless Sensor Networks one of the most relevant enabling technologies for AmI. WSN are complex systems made up of a number of sensor nodes, simple devices that typically embed a low power computational unit (microcontrollers, FPGAs etc.), a wireless communication unit, one or more sensors and a some form of energy supply (either batteries or energy scavenger modules). Low-cost, low-computational power, low energy consumption and small size are characteristics that must be taken into consideration when designing and dealing with WSNs. In order to handle the large amount of data generated by a WSN several multi sensor data fusion techniques have been developed. The aim of multisensor data fusion is to combine data to achieve better accuracy and inferences than could be achieved by the use of a single sensor alone. In this dissertation we present our results in building several AmI applications suitable for a WSN implementation. The work can be divided into two main areas: Multimodal Surveillance and Activity Recognition. Novel techniques to handle data from a network of low-cost, low-power Pyroelectric InfraRed (PIR) sensors are presented. Such techniques allow the detection of the number of people moving in the environment, their direction of movement and their position. We discuss how a mesh of PIR sensors can be integrated with a video surveillance system to increase its performance in people tracking. Furthermore we embed a PIR sensor within the design of a Wireless Video Sensor Node (WVSN) to extend its lifetime. Activity recognition is a fundamental block in natural interfaces. A challenging objective is to design an activity recognition system that is able to exploit a redundant but unreliable WSN. We present our activity in building a novel activity recognition architecture for such a dynamic system. The architecture has a hierarchical structure where simple nodes performs gesture classification and a high level meta classifiers fuses a changing number of classifier outputs. We demonstrate the benefit of such architecture in terms of increased recognition performance, and fault and noise robustness. Furthermore we show how we can extend network lifetime by performing a performance-power trade-off. Smart objects can enhance user experience within smart environments. We present our work in extending the capabilities of the Smart Micrel Cube (SMCube), a smart object used as tangible interface within a tangible computing framework, through the development of a gesture recognition algorithm suitable for this limited computational power device. Finally the development of activity recognition techniques can greatly benefit from the availability of shared dataset. We report our experience in building a dataset for activity recognition. Such dataset is freely available to the scientific community for research purposes and can be used as a testbench for developing, testing and comparing different activity recognition techniques.