MODELING OF TRANSFER PATH FOR DETERMINATION OF COMBUSTION AND NOISE METRICS ON DIESEL ENGINES

Determination of combustion metrics for a diesel engine has the potential of providing feedback for closed-loop combustion phasing control to meet current and upcoming emission and fuel consumption regulations. This thesis focused on the estimation of combustion metrics including start of combustion (SOC), crank angle location of 50% cumulative heat release (CA50), peak pressure crank angle location (PPCL), and peak pressure amplitude (PPA), peak apparent heat release rate crank angle location (PACL), mean absolute pressure error (MAPE), and peak apparent heat release rate amplitude (PAA). In-cylinder pressure has been used in the laboratory as the primary mechanism for characterization of combustion rates and more recently in-cylinder pressure has been used in series production vehicles for feedback control. However, the intrusive measurement with the in-cylinder pressure sensor is expensive and requires special mounting process and engine structure modification. As an alternative method, this work investigated block mounted accelerometers to estimate combustion metrics in a 9L I6 diesel engine. So the transfer path between the accelerometer signal and the in-cylinder pressure signal needs to be modeled. Depending on the transfer path, the in-cylinder pressure signal and the combustion metrics can be accurately estimated - recovered from accelerometer signals. The method and applicability for determining the transfer path is critical in utilizing an accelerometer(s) for feedback. Single-input single-output (SISO) frequency response function (FRF) is the most common transfer path model; however, it is shown here to have low robustness for varying engine operating conditions. This thesis examines mechanisms to improve the robustness of FRF for combustion metrics estimation. First, an adaptation process based on the particle swarm optimization algorithm was developed and added to the single-input single-output model. Second, a multiple-input single-output (MISO) FRF model coupled with principal component analysis and an offset compensation process was investigated and applied. Improvement of the FRF robustness was achieved based on these two approaches. Furthermore a neural network as a nonlinear model of the transfer path between the accelerometer signal and the apparent heat release rate was also investigated. Transfer path between the acoustical emissions and the in-cylinder pressure signal was also investigated in this dissertation on a high pressure common rail (HPCR) 1.9L TDI diesel engine. The acoustical emissions are an important factor in the powertrain development process. In this part of the research a transfer path was developed between the two and then used to predict the engine noise level with the measured in-cylinder pressure as the input. Three methods for transfer path modeling were applied and the method based on the cepstral smoothing technique led to the most accurate results with averaged estimation errors of 2 dBA and a root mean square error of 1.5dBA. Finally, a linear model for engine noise level estimation was proposed with the in-cylinder pressure signal and the engine speed as components.

La régulation de l’économie numérique au Sénégal : la convergence des télécommunications et de l’audiovisuel

Établir une régulation de l’économie numérique au Sénégal représente un enjeu fondamental pour les gouvernants et l’ensemble des acteurs qui la compose. Suivant une démarche plus globalisée, d’énormes mutations normatives visant les rationalités et les mécanismes de réglementations ont évolué dans le temps donnant une place plus considérable au droit dans les politiques publiques des États. Différents modèles normatifs et institutionnels sont ainsi adaptés pour prendre en charge le phénomène de la convergence dépendamment du contexte réglementaire du pays. Pour ce qui est du contexte actuel du Sénégal, l’étanchéité des réglementations relatives aux télécommunications et à l’audiovisuel, désormais convergent, est fondée sur un modèle de réglementation sectorielle. Toutefois, leur convergence a provoqué un brouillage des frontières qui risque désormais de poser des conséquences énormes sur le plan normatif tel que des risques d’enchevêtrement sur le plan institutionnel ou réglementaire. Or au plan national, il n’existe à ce jour aucun texte visant à assoir les bases d’une régulation convergente. Ainsi, à la question de savoir si la régulation sectorielle est pertinente au regard de l’environnement du numérique marqué par la convergence, il s’est avéré qu’elle pourrait être adoptée comme modèle à court terme. Mais dans un but de réaliser des économies d’échelle pour réguler efficacement les différents secteurs et industries infrastructurelles, il faut un modèle de régulation unique marquée par la fusion de l’ARTP et du CNRA. D’une part, la régulation sectorielle permet d’accompagner la transition vers le numérique déjà lancée et d’autre part la régulation multisectorielle servira une fois la convergence des marchés établis.

The Spanish equity market (2000-2014): stylized facts

Introduction. This thesis is framed in the last 15 years of history of the Spanish equity market (years 2000 to 2014). In this sense and, as an introduction of this work, in the first chapter the main features of the background of the electronic market for shares and the implications that the migration from out-c1y circles to this automatic system is explained. The main changes of this electronic system (Spanish stock exchange interconnection system) are detailed in this part. Also in this first chapter is explained the important European meeting, in December 1999, of eight stock exchanges which foresee, in a first step, to design a single market model for, lately, try to merge, final step that did not take place. After this initial moment in December 1999, in this work the main features of the market model of the main European markets (London, Paris, Germany and Italy) are generally described, given that it is important to consider the European context of the Spanish equity market, specially during these last fifteen years. Along chapter two, the thesis is supported with the theoretic frame explaining here the nature of markets and their important role in the economy, detailing afte1wards the Spanish case from the point of view of its institutional structure and legal framework. Besides, in this chapter, a deep review of initial public offerings (main concepts and calendar steps) is done as well as take-over bids (typology and key-concepts)...

Psychometric properties of the Iranian version of the premature ejaculation diagnostic tool

Introduction Premature ejaculation (PE) is one of the most prevalent male sexual problems. The Premature Ejaculation Diagnostic Tool (PEDT) is a suitable patient-reported outcome measure for the assessment of PE. Aim To examine the psychometric proporties of a translated and culturally adapted version of the PEDT in a sample of Iranian men suffering from PE. Methods Two independent samples were compared, one including patients with PE based on the DSM-IV-TR criteria (n = 269) and the other including healthy men without PE (n = 289). A backward–forward translation procedure was used to translate the PEDT into Persian. Both samples were asked to fill in the PEDT twice—at baseline and 4 weeks later. Main Outcome Measures Internal consistency, test–retest reliability, convergent validity, factor structure, measurement invariance across sexual health status (i.e., between men with and without PE). Results Mean ages of men without and with PE were 34.9 and 35.3 years, respectively. Cronbach's alpha coefficient for the total PEDT score was 0.89. All items and the total score were remarkably consistent between the two measurement points. All five PEDT items correlated at r = 0.40 or greater with their own scale, indicating good convergent validity. There was a high and significant correlation (r = −0.82, P  < 0.001) between the PEDT score and IELT. Healthy men reported lower scores (fewer complaints) on the PEDT compared with the PE group. A single-factor model was found to be best-fitting in the exploratory factor analysis; this was confirmed by confirmatory factor analysis. The PEDT was invariant across sexual health status and perceived similarly by men with and without PE. Conclusion The results provide evidence for good reliability and validity of the Iranian version of the PEDT. The questionnaire therefore represents a suitable tool for screening PE in Iranian men.

Cardiorespiratory fitness and cardiometabolic risk factors in schoolchildren from Colombia: The FUPRECOL Study

The objectives of this study are to investigate the association between cardiorespiratory fitness and cardiovascular risk factors in schoolchildren and to evaluate the degree of association between overall and abdominal adiposity and cardiorespiratory fitness. A total of 1,875 children and adolescents attending public schools in Bogota, Colombia (56.2% girls; age range of 9–17.9 years). A cardiovascular risk score (Z-score) was calculated and participants were divided into tertiles according to low and high levels of overall (sum of the skinfold thicknesses) and abdominal adiposity. Schoolchildren with a high level of overall adiposity demonstrated significant differences in seven of the 10 variables analyzed (i.e. systolic and diastolic blood pressure, triglycerides, triglycerides/HDL-c ratio, total cholesterol, glucose and cardiovascular risk score). Schoolchildren with high levels of both overall and abdominal adiposity and low cardiorespiratory fitness had the least favorable cardiovascular risk factors score. These findings may be relevant to health promotion in Colombian youth.

Comparison of Photovoltaic panel’s standard and simplified models

Shockley diode equation is basic for single diode model equation, which is overly used for characterizing the photovoltaic cell output and behavior. In the standard equation, it includes series resistance (Rs) and shunt resistance (Rsh) with different types of parameters. Maximum simulation and modeling work done previously, related to single diode photovoltaic cell used this equation. However, there is another form of the standard equation which has not included Series Resistance (Rs) and Shunt Resistance (Rsh) yet, as the Shunt Resistance is much bigger than the load resistance and the load resistance is much bigger than the Series Resistance. For this phenomena, very small power loss occurs within a photovoltaic cell. This research focuses on the comparison of two forms of basic Shockley diode equation. This analysis describes a deep understanding of the photovoltaic cell, as well as gives understanding about Series Resistance (Rs) and Shunt Resistance (Rsh) behavior in the Photovoltaic cell. For making estimation of a real time photovoltaic system, faster calculation is needed. The equation without Series Resistance and Shunt Resistance is appropriate for the real time environment. Error function for both Series resistance (Rs) and Shunt resistances (Rsh) have been analyzed which shows that the total system is not affected by this two parameters' behavior.

Simulated morphological landscape of polymer single crystals by phase-field model

The novel phase field model with the "polymer characteristic" was established based on a nonconserved spatiotemporal Ginzburg-Landau equation (TDGL model A). Especially, we relate the diffusion equation with the crystal growth faces of polymer single crystals. Namely, the diffusion equations are discretized according to the diffusion coefficient of every lattice site in various crystal growth faces and the shape of lattice is selected based on the real proportion of the unit cell dimensions.

Operator's and organizational maintenance manual : water purification unit, van-type, body mounted, electric driven, AC, 115, 208 V, single- and 3-phase, 60 hertz, 1/20 to 2 hp, 3000 gph (MET-PRO model 3000V), NSN 4610-00-168-1799.

"18 June 1980."

Organizational, direct support, and general support maintenance repair parts and special tools list : air conditioner, base mounted, air cooled, 208 VAC, 3-phase, 60 Hz, single package, 36,000 Btu/hr, model UAC 40-5/6-08, NSN 4120-01-122-0629, model 2643T100-1, NSN 4120-01-218-6912.

"10 October 1989."

Organizational, direct and general support, and depot maintenance repair parts and special tools list : air conditioner, base mounted, air cooled, 208V, 3 phase, 60 cycle, AC, single package, 36,000 BTU/HR, (York Corp model MA3-F23A), FSN 4120-926-1116.

Includes index.

Operator, organizational, direct and general support, and depot maintenance manual : air conditioner, base mounted, air cooled, 208 volt, 3-phase, 60 cycle, AC, single package, 36,000 BTU/hr, (York Corp model MA 3-F23A), FSN 4120-926-1116.

"October 1967."

Organizational maintenance repair parts and special tools lists : water purification unit, van-type, body mounted, electric driven, AC, 115/208 V, single and 3 phase, 60 hertz, 1/20 to 2 hp, 1500 GPH, model EMC-1500S, NSN 4610-01-037-8746.

"15 May 1980."

Operator's manual : water purification unit, base mounted, electric driven, AC, 115, 208 volt, single and 3 phase, 60 cycle, 3000 gallons per hour (MET-PRO model 3000-2700A), FSN 4610-857-0330).

"August 1963."

Direct support and general support maintenance manual : water purification unit, van type, body mounted, electric motor driven, AC, DC, 115, 208 V, single and 3 phase, 60 hertz, 1/20 to 2 hp, 1500 gph, model EMC-1500S, NSN 4610-01-037-8746, EMC Industries Inc., DAAKO1-76-C-5661.

"1 August 1979."