Germinação de sementes in vitro e desenvolvimento de plantas ex vitro de algodãozinho-do-campo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos de fitorreguladores e nitrato de potássio na germinação de sementes do limão 'volkameriano'

Foram estudados os efeitos de substâncias reguladoras de crescimento, bem como do nitrato de potássio (KNO3), na germinação de sementes do limão 'volkameriano' (Citrus volkameriana Pasq.). O experimento foi realizado em germinador, contendo papel de filtro umedecido com água destilada e gerbox, como meio para a germinação das sementes. Estas foram retiradas de frutas maduras, lavadas, secas à sombra e armazenadas durante 101 dias em câmara fria. Logo após, foram tratadas com os fitorreguladores e o KNO3 por 24 horas, conforme os tratamentos: H2O; 50 mg/l de GA3; 250 mg/l de GA3; 50 mg/l de GA4 + GA7 + fenilmetilaminopurina; 100 mg/l de GA4 + GA7 + fenilmetilaminopurina; 20 mg/lde fenilmetilaminopurina; 40 mg/lde fenilmetilaminopurina e 0,2% de KNO3. As avaliações foram realizadas depois de 15 dias da semeadura, sendo o intervalo de 2 dias. Através da análise estatística dos resultados obtidos, foi possível concluir que no tratamento com 50 mg/lde GA4 + GA7 + fenilmetilaminopurina houve a maior porcentagem de germinação (89,00%) de sementes, num menor tempo médio (22,29 dias).

Influência de fitorreguladores e nitrato de potássio na germinação de sementes e no crescimento de porta-enxerto de Citrus amblycarpa

Foram avaliados os efeitos de fitorreguladores (giberelinas e citocininas) e nitrato de potássio (KNO3), na germinação de sementes e na promoção do crescimento de seedlings do porta-enxerto 'Nasnaran' (Citrus amblycarpa Ochese). Realizou-se primeiramente o experimento em germinador, contendo papel de filtro umedecido com água destilada e gerbox, como meio para a germinação das sementes. Os tratamentos foram realizados mediante imersão das sementes, em soluções preparadas com os fítorreguladores e KNO3, durante 24 horas. Através dos resultados obtidos, concluiu-se que o tratamento com 100 mg/1 de GA4 + GA7 + fenilmetilaminopurina, apresentou a maior porcentagem de germinação (88%), num tempo médio de 21 dias. Tomando como base o resultado do germinador, sementes de Citrus amblycarpa foram semeadas em canteiros e quando as plantas atingiram a altura de 6,0 cm receberam 2 pulverizações com 0; 50; 100 e 150 mg/1 de GA4 + GA7 + fenilmetilami-nopurina, com intervalo de 21 dias. Avaliou-se a matéria seca total, caule e folhas, área foliar e altura das plantas, sendo que a análise desses parâmetros mostrou que o GA4 + GA7 + fenilmetUaminopurina na concentração de 50 mg/1 foi o tratamento que apresentou os melhores resultados.

TRATAMENTO DE SEMENTES DE ARROZ, TRIGO, FEIJÃO E SOJA COM UM PRODUTO FORMULADO À BASE DE CÉLULAS E DE METABÓLITOS DE Bacillus subtilis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade do café natural e despolpado após secagem em terreiro e com altas temperaturas

Objetivou-se no presente trabalho verificar a qualidade do café natural e despolpado durante a secagem em terreiro e secagem com ar aquecido a 40º e 60ºC. O trabalho foi realizado no Departamento de Engenharia e no Pólo de Tecnologia em Pós-Colheita do Café da Universidade Federal de Lavras (UFLA). A colheita do café, cultivar Topázio, foi seletiva. Parte do café foi despolpado e outra parte processado de forma natural. Uma parcela de cada tipo de café foi conduzida para a secagem em terreiro e outra parcela para secagem com temperaturas de 40ºC e 60ºC. Para avaliação da qualidade, foram feitos teste de condutividade elétrica e lixiviação de potássio; determinação de acidez titulável total; teste de acidez graxa; açúcares totais e redutores. Os resultados obtidos permitem concluir que: o tempo para secagem é afetado pelos diferentes tipos de secagem e processamentos; a condutividade elétrica, a lixiviação de potássio, a acidez titulável total e a acidez graxa aumentam com a elevação da temperatura de secagem, independente do tipo de processamento; os açúcares redutores e os açúcares totais diminuem com o aumento da tem peratura de secagem independente do tipo de processamento; a secagem com temperatura de 60ºC afetou negativamente a qualidade do café.

Valor nutritivo e estudo cinético do trato digestivo de dietas contendo grãos secos ou ensilados de sorgo de baixo e alto tanino para eqüinos

Quatro éguas sem raça definida (idade e peso corporal médios de seis anos e 400 kg) foram distribuídas em delineamento experimental em quadrado latino para se avaliar o valor nutritivo e o estudo cinético do trato digestivo de grãos secos ou ensilados de sorgo de baixo e alto conteúdos de tanino na alimentação de eqüinos. Os tratamentos consistiram de dietas contendo dois híbridos de grãos de sorgo (baixo e alto níveis de tanino) e dois métodos de conservação (secos e ensilados). As dietas foram isoprotéicas (12,4% PB), com ingestão diária de MS estabelecida em 1,5% PV (relação feno:concentrado de 50: 50). Os parâmetros de trânsito gastrintestinal avaliados foram: k1 (taxa de passagem pelo intestino grosso), k2 (taxa de passagem pelo estômago), TT (tempo de trânsito), TMR (tempo médio de retenção) e TMRT (tempo médio de retenção total). Os tratamentos não afetaram os coeficientes de digestibilidade aparente (CDa) da MS e do amido, cujos valores médios foram 54,04 e 98,91%, respectivamente. Verificou-se efeito benéfico da ensilagem dos grãos de sorgo de alto conteúdo de tanino sobre a digestibilidade da PB e FDN. A CDa da PB e FDN para a dieta contendo grãos secos de sorgo de alto teor de tanino foi de 49,76 e 32,20% e para as dietas com grãos de sorgo de baixo conteúdo de tanino (seco ou ensilado) e grãos ensilados de sorgo de alto teor de tanino foi de 65,63 e 43,32%, respectivamente. Obteve-se somente efeito do método de conservação dos grãos de sorgo (secos vs ensilados) sobre o TMR, em que o valor para as dietas com silagens de grãos ensilados e secos foi, respectivamente, de 40,08 e 37,9h. Concluiu-se que os grãos de sorgo secos de alto teor de tanino não devem ser usados como principal grão energético nos concentrados para eqüinos, por diminuírem a digestibilidade da proteína e fibra.

Efeito da densidade de semeadura na produção do amendoim

In this work, the effects of sowing densities on peanut (Arachis hypogaea L.) crop, cv. Tatu were studied. Three experiments were carried out under field conditions on a soil classified as ''Latosol Roxo'', in the Municipality of Pontal, SP, during the wet seasons of 1987-88, 1988-89, and 1989-90. The densities studied were 7, 10, 13, 16, 19, 22, 25, and 28 seeds in one metter of row, under some row spacing of 0.60 m. The pod number per plant was the yield component responsible for the variation of pod production per plant and these decreased with the increase of sowing density. However. The low pod production per plant in high densities of sowing was compensated by the high populations of plants and these produced high yield. Thus, good pod yields were obtained, without significant losses of yield compared with the higher densities, at density of 13 seeds per meter, in 1987-88, 16 seeds per meter in 1988-89 and 10 seeds per meter in 1989-90, that resulted, respectively, in 11.36, 12.72 and 9.28 plants per meter at harvest time.

The influence of the thickness on the functional properties of cassava starch edible films

The properties of edible films are influenced by several factors, including thickness. The purpose of this paper was to study the influence of thickness on the viscoelasticity properties, water vapor permeability, color and opacity of cassava starch edible films. These films were prepared by a casting technique, the film-forming solutions were 1, 2, 3 and 4% (w/v) of starch, heated to 70degreesC. Different thicknesses were obtained by putting 15 to 70 g of each solution on plexiglass plates. After drying at 30degreesC and ambient relative humidity, these samples were placed for 6 days at RH of 75%, at 22degreesC. The sample thicknesses were determined by a digital micrometer (+/-0.001 mm), as the average of nine different points. The viscoelasticity properties were determined by stress relaxation tests with a texture analyser TA.XT2i (SMS), being applied the Burgers model of four parameters. The water vapor permeability was determined with a gravimetric method, and color and opacity were determined using a Miniscan XE colorimeter, operated according to the Hunterlab method. All the tests were carried out in duplicate at 22degreesC. Practically, the four visco-elasticity properties calculated by the Burgers model had the same behavior, increasing with the thickness of all films, according to a power law model. The water vapor permeability and the color difference increased linearly with the thickness (0.013-0.144 mm) of all films prepared with solution of 1 to 4% of starch. on the other hand, the effect of the variation of the thickness over the opacity, was more important in the films with 1 and 2% of starch. It can be concluded that the control of the thickness in the elaboration of starch films by the casting technique is of extreme importance.

Plasma enhanced chemical vapor deposition of titanium(IV) ethoxide-oxygen-helium mixtures

Thin films were deposited by plasma enhanced chemical vapor deposition from titanium (IV) ethoxide (TEOT)-oxygen-helium mixtures. Actinometric optical emission spectroscopy was used to obtain the relative plasma concentrations of the species H, CH, O and CO as a function of the percentage of oxygen in the feed, R(ox). The concentrations of these species rise with increasing R(ox) and tend to fall for R(ox) greater than about 45%. As revealed by a strong decline in the emission intensity of the actinometer Ar as R(ox) was increased, the electron mean energy or density (or both) decreased as greater proportions of oxygen were fed to the chamber. This must tend to reduce gas-phase fragmentation of the monomer by plasma electrons. As the TEOT flow rate was fixed, however, and since the species H and CH do not contain oxygen, the rise in their plasma concentrations with increasing R(ox) is explained only by intermediate reactions involving oxygen or oxygen-containing species. Transmission infrared (IRS) and X-ray photoelectron (XPS) spectroscopies were employed to investigate film structure and composition. The presence of CH(2), CH(3), C=C, C-O and C=O groups was revealed by IRS. In addition, the presence of C-O and C=O groups was confirmed by XPS, which also revealed titanium in the +4 valence state. The Ti content of the films, however, was found to be much less than that of the monomer material itself. (C) 2007 Elsevier B.V. All rights reserved.

Synthesis Pengo System plates for the treatment of long-bone diaphyseal fractures in dogs

A Brazilian orthopaedic company designed a stainless steel plate called Synthesis Pengo System (S.P.S.), which has one fixed and one changeable extremity. According to the assembly of the changeable extremity, it is possible to obtain dynamization or neutralization of the fracture site. Since the S.P.S. plate was developed for use in human patients, the aim of this study was to evaluate this system in long-bone diaphyseal fractures in dogs. Eight dogs with closed diaphyseal fractures of the femur (n = 1), radius and ulna (n = 5), and tibia (n = 2) were used. Patients were aged seven months to three years and weighed 18 to 31.2 kg. The S.P.S. plate was assembled with one fixed extremity and one changeable extremity in dynamization mode. The trail bar was positioned for synthesis modules with holes for cortical screws. The modules were positioned close to one another in two fractures and for away from the fracture site in the others. The bone healing occurred by external callus. Since motion at the fracture site determines the amount of callus required, the secondary bone healing that was observed in all of the cases indicated less rigid fixation of this system. A potential benefit of this system was a lesser interface contact with the bone since it was only done by trail bar. The major disadvantage was the prominence of the implant. It was possible to conclude that the S.P.S. plate appears to be a suitable method for the treatment of diaphyseal fractures in dogs.

Estimación de la heredabilidad del intervalo de partos en bovinos cruzados

Objetive. To estimate the heritability of interval calving in crossbred cattle. Materials and methods. Information from database of La Leyenda farm, in the municipality of Caucasia (Antioquia) was used. A single-trait animal model was used, that included genetic group, year of birth, season of birth and the number of calvings as fixed effects and the additive direct genetic, permanent environmental and residual as random effects. Results. The heritability estimated was 0.15 +/- 0.07 and the phenotypic mean was 544 +/- 97 days. Conclusions. The heritability for the interval between calvings was low, indicating that little genetic progress can be achieved by selecting for this characteristic.

PLANT-TO-SEED TRANSMISSION of CURTOBACTERIUM FLACCUMFACIENS pv. FLACCUMACIENS IN A DRY BEAN CULTIVAR

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Improving the Fluorescence Detectability of Polycyclic Aromatic Hydrocarbons for Evaluation of Workplace Environments of Cement Industries Processing Organic Residues

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Germinação e vigor de sementes de Talisia esculenta (St. Hil) Radlk em função de diferentes períodos de fermentação

The present study had the aim of testing the effect of different fermentation periods on the germination and vigour of pitomba seeds. The experiment was carried out in the greenhouse of the Seed Section of the Agrarian Sciences Center of the Federal University of Paraiba, Areia, PB. The fruits were picked directly from maternal trees located in the same municipal district, peeled manually and fermented for 24, 48, 72, 96 and 120 hours, in addition to seeds with pulp (without fermentation). The experiment was entirely randomized with four replications of 25 seeds per treatment. After each fermentation period, the seeds were washed in tap water and left in the laboratory environment for 24 hours on paper towels. Water content, germination and vigor (germination velocity index, seedling length and dry mass., relative frequency and medium time of germination) were measured. Less water content was shown in the seeds fermented for 96 hours (38.5%), while the largest germination percentages were observed after 76 hours of fermentation (93%). In relation to vigour, the best values occurred with 86 and 105 hours of fermentation. Fermentation is recommended for up to 105 hours as appropriate to removal of the pitomba seed aril.

Vernalização e corte do terço apical dos bulbos na produção e qualidade de sementes de cebola

The onion (Allium cepa L.) belongs to the family Alliaceae, and the second vegetables in economic importance. It horticultural culture of high relevance, in central-south and in the far south, is highlighting the states of São Paulo, Rio Grande do Sul, Santa Catarina and Parana. The bulbificacion only begins when the combination of the determinants of bulbificacion (photoperiod and temperature) of each cultivar is reached. It Can be grown in tropical regions with the use of vernalization of the bulbs. The objective of this study is to identify the efficiency in the production of seed, onion depending on the cut or not the bulb before the period of vernalization. The analysis of the variables consisted: humidity; number of seeds; mass of seeds for umbel; umbels number; number of seeds for umbel; total number of flowers and of fecundated flowers; number of seeds for capsule; total mass of seeds; emergency percentage; vigor percentage; index of emergency speed and mass of 100 seeds humidity; number of seeds; mass of seeds for umbel; umbels number; number of seeds for umbel; total number of flowers and of fecundated flowers; number of seeds for capsule; total mass of seeds; emergency percentage; vigor percentage; index of emergency speed and mass of 100 seeds, using the cultivars Baia Periforme and Texas Grano. The experimental design was randomized blocks with four replicates, there was 80 plants for replicate, each parcel was conduced with 20 plants distributed in 4 lines of 5 plants with spacing of 20cm between plants and lines which was avaliated the 6 central plants. The seeds production not variated between cultivars Texas Grano e Baia Periforme. The cultivar Texas Grano showed seeds with more physiological quality. The cut or not cut of the bulbs not changed the physiological quality of the seeds. But utilization of whole bulbs resulted more yield of seeds with more flowers number and fertilized flower in Baia Periforme, more value of the total mass of seeds, number of seeds by plant and number and mass of seed by umbel in two cultivars.