Child car restraints : mandating type and seating row according to age with positive effect in regional city in Queensland, Australia

Road trauma is a leading cause of child injury worldwide. In highly motorised countries, injury as a passenger represents a major proportion of all child road deaths and hospitalisations. Australia is no exception, particularly since there are high levels of private motor vehicle travel to school in most Australian states. Recently the legislation governing the type of car restraints required for children aged under 7 years has changed in Australia, aligning requirements better with accepted best practice. However, it is unclear what effect these changes have had on children’s seating positions or the types of restraints used. A mixed methods evaluation of the impact of the new legislation on compliance was conducted at three times: baseline (Time 1); after announcement that changes were going to be implemented but before enforcement began (Time 2); and after enforcement commenced (Time 3). Measures of compliance were obtained using two methods: road-side observations of vehicles with child passengers; and parental self-report (intercept interviews conducted at Time 2 and Time 3 only). Results from the observations suggested an overall positive effect. Proportions of children occupying front seats decreased overall and use of dedicated child seats increased to almost 40% of the observed children by Time 3. However, almost a quarter of the children observed still occupied front seats. These results differed from those of the interview study where almost no children were reported as usually travelling in the front seat, and reported use of dedicated restraints with children was almost 90%, over twice that of the observations.

Estimation of illuminance on the south facing surfaces for clear skies in Iran

Background: Daylight availability data are essential for designing effectively day lighted buildings. In respect to no available daylight availability data in Iran, illuminance data on the south facing vertical surfaces were estimated using a proper method. Methods: An illuminance measuring set was designed for measuring vertical illuminances for standard times over 15 days at one hour intervals from 9 a.m. to 3 p.m. at three measuring stations (Hamadan, Eshtehard and Kerman). Measuring data were used to confirm predicted by the IESNA method. Results: Measurement of respective illuminances on the south vertical surfaces resulted in minimum values of 10.5 KLx, mean values of 33.59 KLx and maximum values of 79.6 KLx. Conclusion: In this study was developed a regression model between measured and calculated data of south facing vertical illuminance. This model, have a good linear correlation between measured and calculated values (r= 0.892).

Automated speed enforcement in Australia : recent examples of the influence of public opinion on program sustainability

In Australia, speeding remains a substantial contributor to road trauma. The National Road Safety Strategy (2011-2020) highlighted the need to harness community support for current and future speed management strategies. Australia is known for intensive speed camera programs which are both automated and manual, employing covert and overt methods. Recent developments in the area of automated speed enforcement in Australia help to illustrate the important link between community attitudes to speed enforcement and subsequent speed camera policy developments. A perceived lack of community confidence in camera programs prompted reviews in New South Wales and Victoria in 2011 by the jurisdictional Auditor-General. This paper explores automated speed camera enforcement in Australia with particular reference to the findings of these two reports as they relate to the level of public support for and community attitudes towards automated speed enforcement. It also provides comment on the evolving nature of automated speed enforcement according to previously identified controversies and dilemmas associated with speed camera programs.

The impact of penalty increases on speeding behaviour in Queensland and a characterisation of speeding offenders

This project examined the effects of speeding penalty changes that occurred in Queensland in 2003 on the behaviour of speeding offenders. These penalty changes included increasing the number of offence categories, and in turn narrowing the range of speeds associated with the offence categories; increasing the monetary fines for all offences, with the largest increases observed for high-range offences; and introducing automatic licence suspension and an eight demerit point penalty for the highest offence category. To explore the impact of the penalty changes, offence data collected for two cohorts of motorists in Queensland who were caught speeding prior to and subsequent to the penalty changes (N = 84,456) were compared. The first cohort consisted of individuals (operators of all vehicles including motorcycles) who committed a speeding offence in May 2001 (two years prior to the speeding penalty change); and individuals who committed a speeding offence in May 2003 (one month after the introduction of the penalty change). Four measures of recidivism were devised and used to assess the effects of the new penalties with regard to deterring the speeding behaviour of offenders. Additionally, the project investigated the relationship between speeding offences, other risky driving behaviours, crash involvement, and criminal behaviour.

Speed enforcement in China : national, provincial and city initiatives and their success

China is motorizing rapidly, with associated urban road development and extensive construction of motorways. Speeding accounts for about 10% of fatalities, which represents a large decrease from a peak of 17.2% in 2004. Speeding has been addressed at a national level through the introduction of laws and procedural requirements in 2004, in provinces either across all road types or on motorways, and at city level. Typically, documentation of speed enforcement programmes has taken place when new technology (i.e. speed cameras) is introduced, and it is likely that many programmes have not been documented or widely reported. In particular, the national legislation of 2004 and its implementation was associated with a large reduction in fatalities attributed to speeding. In Guangdong Province, after using speed detection equipment, motorway fatalities due to speeding in 2005 decreased by 32.5% comparing with 2004. In Beijing, the number of traffic monitoring units which were used to photograph illegal traffic activities such as traffic light violations, speeding and using bus lanes illegally increased to 1958 by April 1, 2009, and in the future such automated enforcement will become the main means of enforcement, expected to account for 60% of all traffic enforcement in Beijing. This paper provides a brief overview of the speeding enforcement programmes in China which have been documented and their successes.

Rail incident investigator training: Is there support for a standardised Australasian training framework?

Background: Historically rail organisations have been operating in silos and devising their own training agendas. However with the harmonisation of the Australian workplace health and safety legislation and the appointment of a national rail safety regulator in 2013, rail incident investigator experts are exploring the possibility of developing a unified approach to investigator training. Objectives: The Australian CRC for Rail Innovation commissioned a training needs analysis to identify if common training needs existed between organisations and to assess support for the development of a national competency framework for rail incident investigations. Method: Fifty-two industry experts were consulted to explore the possibility of the development of a standardised training framework. These experts were sourced from within 19 Australasian organisations, comprising Rail Operators and Regulators in Queensland, New South Wales, Victoria, Western Australia, South Australia and New Zealand. Results: Although some competency requirements appear to be organisation specific, the vast majority of reported training requirements were generic across the Australasian rail operators and regulators. Industry experts consistently reported strong support for the development of a national training framework. Significance: The identification of both generic training requirements across organisations and strong support for standardised training indicates that the rail industry is receptive to the development of a structured training framework. The development of an Australasian learning framework could: increase efficiency in course development and reduce costs; establish recognised career pathways; and facilitate consistency with regards to investigator training.

Factors affecting two- and five-year re-offence rates in Queensland drink drivers

Risk factors for repeat drink driving, an important road safety issue, are well known, but estimates of Australian recidivism rates by risk factors, apart from a recent NSW study, are not. Driving records of a cohort of Queensland drink drivers matched by age, region, BAC level and prior offence to participants in a drink driving rehabilitation program were used to estimate sex-specific two- and five-year re-offence rates overall and by these factors. Estimates of the proportion of Queensland drink drivers with a prior DD offence in 2004 were used to standardise rates to the Queensland drink driving population. Rates were higher in remote areas, as were rates in males, young drivers, drivers with high BAC levels and in drivers with one and especially with at least two prior DD convictions. Five-year rates for Queensland were estimated as 21.8% in males and 16.4% in females, appreciably higher than in NSW.

School-based programs for increasing connectedness and reducing risk behavior : a systematic review

School connectedness has a significant impact on adolescent outcomes, including reducing risk taking behavior. This paper critically examines the literature on school-based programs targeting increased connectedness for reductions in risk taking. Fourteen articles describing seven different school-based programs were reviewed. Programs drew on a range of theories to increase school connectedness, and evaluations conducted for the majority of programs demonstrated positive changes in school connectedness, risk behavior, or a combination of the two. Many of the reviewed programs involved widespread school system change, however, which is frequently a complex and time consuming task. Future research is needed to examine the extent of intervention complexity required to result in change. This review also showed a lack of consistency in definitions and measurement of connectedness as well as few mediation analyses testing assumptions of impact on risk taking behavior through increases in school connectedness. Additionally, this review revealed very limited evaluation of the elements of multi-component programs that are most effective in increasing school connectedness and reducing adolescent risk taking.

Evaluation of Trippple : a field analysis

This paper illustrates a field research performed with a team of experts involved in the evaluation of Trippple, a system aimed at supporting the different phases of a tourist trip, in order to provide feedback and insights, both on the functionalities already implemented (that at the time of evaluation were available only as early and very unstable prototypes), and on the functionalities still to be implemented. We show how the involvement of professionals helped to focus on challenging aspects, instead of less important, cosmetic, issues and resulted profitable in terms of early feedback, issues spotted, and improvements suggested

On the commonly accepted assumptions regarding observed motor vehicle crash counts at transport system locations

Readily accepted knowledge regarding crash causation is consistently omitted from efforts to model and subsequently understand motor vehicle crash occurrence and their contributing factors. For instance, distracted and impaired driving accounts for a significant proportion of crash occurrence, yet is rarely modeled explicitly. In addition, spatially allocated influences such as local law enforcement efforts, proximity to bars and schools, and roadside chronic distractions (advertising, pedestrians, etc.) play a role in contributing to crash occurrence and yet are routinely absent from crash models. By and large, these well-established omitted effects are simply assumed to contribute to model error, with predominant focus on modeling the engineering and operational effects of transportation facilities (e.g. AADT, number of lanes, speed limits, width of lanes, etc.) The typical analytical approach—with a variety of statistical enhancements—has been to model crashes that occur at system locations as negative binomial (NB) distributed events that arise from a singular, underlying crash generating process. These models and their statistical kin dominate the literature; however, it is argued in this paper that these models fail to capture the underlying complexity of motor vehicle crash causes, and thus thwart deeper insights regarding crash causation and prevention. This paper first describes hypothetical scenarios that collectively illustrate why current models mislead highway safety researchers and engineers. It is argued that current model shortcomings are significant, and will lead to poor decision-making. Exploiting our current state of knowledge of crash causation, crash counts are postulated to arise from three processes: observed network features, unobserved spatial effects, and ‘apparent’ random influences that reflect largely behavioral influences of drivers. It is argued; furthermore, that these three processes in theory can be modeled separately to gain deeper insight into crash causes, and that the model represents a more realistic depiction of reality than the state of practice NB regression. An admittedly imperfect empirical model that mixes three independent crash occurrence processes is shown to outperform the classical NB model. The questioning of current modeling assumptions and implications of the latent mixture model to current practice are the most important contributions of this paper, with an initial but rather vulnerable attempt to model the latent mixtures as a secondary contribution.

Essential elements for recruitment and retention : Generation Y

Purpose: Generation Y (Gen Y) is the newest and largest generation entering the workforce. Gen Y may differ from previous generations in work-related characteristics which may have recruitment and retention repercussions. Currently, limited theoretically-based research exists regarding Gen Y’s work expectations and goals in relation to undergraduate students and graduates. Design/methodology/approach: This study conducted a theoretically-based investigation of the work expectations and goals of student- and working-Gen Y individuals based within a framework incorporating both expectancy-value and goal setting theories. N = 398 provided useable data via an on-line survey. Findings: Overall, some support was found for predictions with career goals loading on a separate component to daily work expectations and significant differences between student- and working- Gen Y on career goals. No significant differences were found, however, between the two groups in daily work expectations. Research limitations/implications: Future research may benefit from adopting a theoretical framework which assesses both daily work expectations and career goals when examining the factors which motivate Gen Y’s decisions to join and remain at a particular organisation. Practical implications: At a practical level, based on the findings, some examples are provided of the means by which organisations may draw upon daily work expectations and career goals of importance to Gen Y and, in doing so, influence the likelihood that a Gen Y individual will join and remain at their particular organisation. Originality/value: This research has demonstrated the utility of adopting a sound theoretical framework in furthering understanding about the motivations which influence organisations’ ability to recruit and retain Gen Y, among both student Gen Y as well as those Gen Y individuals who are already working.

Incident investigation training needs for the Australasian rail industry

A core component for the prevention of re-occurring incidents within the rail industry is rail safety investigations. Within the current Australasian rail industry, the nature of incident investigations varies considerably between organisations. As it stands, most of the investigations are conducted by the various State Rail Operators and Regulators, with the more major investigations in Australia being conducted or overseen by the Australian Transport Safety Bureau (ATSB). Because of the varying nature of these investigations, the current training methods for rail incident investigators also vary widely. While there are several commonly accepted training courses available to investigators in Australasia, none appear to offer the breadth of development needed for a comprehensive pathway. Furthermore, it appears that no single training course covers the entire breadth of competencies required by the industry. These courses range in duration between a few days to several years, and some were run in-house while others are run by external consultants or registered training organisations. Through consultations with rail operators and regulators in Australasia, this paper will identify capabilities required for rail incident investigation and explore the current training options available for rail incident investigators.

Extending the explanatory utility of the EPPM beyond fear-based persuasion

In the 20 years since its inception, the EPPM has attracted much empirical support. Currently, and unsurprisingly given that is a model of fear-based persuasion, the EPPM’s explanatory utility has been based only upon fear-based messages. However, an argument is put forth herein, which draws upon existing evidence, that the EPPM may be an efficacious framework for explaining the persuasive process and outcomes of emotion-based messages more broadly when such messages are addressing serious health topics. For the current study, four different types of emotional appeals were purposefully devised and included a fear, an annoyance/agitation, a pride, and a humour-based message. All messages addressed the serious health issue of road safety, and in particular the risky behaviour of speeding. Participants (N = 551) were exposed to only one of the four messages and subsequently provided responses within a survey. A series of 2 (threat: low, high) x 2 (efficacy: low, high) analysis of variance was conducted for each of the appeals based on the EPPM’s message outcomes of acceptance and rejection. Support was found for the EPPM with a number of main effects of threat and efficacy emerging, reflecting that, irrespective of emotional appeal type, high levels of threat and efficacy enhanced message outcomes via maximising acceptance and minimising rejection. Theoretically, the findings provide support for the explanatory utility of the EPPM for emotion-based health messages more broadly. In an applied sense, the findings highlight the value of adopting the EPPM as a framework when devising and evaluating emotion-based health messages for serious health topics.