Long-Range Stress Redistribution Resulting From Damage in Heterogeneous Media

It has been shown in CA simulations and data analysis of earthquakes that declustered or characteristic large earthquakes may occur with long-range stress redistribution. In order to understand long-range stress redistribution, we propose a linear-elastic but heterogeneous-brittle model. The stress redistribution in the heterogeneous-brittle medium implies a longer-range interaction than that in an elastic medium. Therefore, it is surmised that the longer-range stress redistribution resulting from damage in heterogeneous media may be a plausible mechanism governing main shocks.

Ocean Waves Propagating over a Porous Seabed: Residual and Oscillatory Mechanisms

Two mechanisms for the wave-induced pore pressures in a porous seabed, i.e. oscillatory and residual excess pore pressures, have been observed in laboratory experiments and field measurements. Most previous investigations have focused on one of the mechanisms individually. In this paper, an analytical solution for the wave-induced residual pore pressure, which is not available yet, is derived, and compared with the existing experimental data. With the new solution, a parametric analysis is performed to clarify the applicable ranges of two mechanisms. Then, a simplified approximation for the prediction of wave-induced liquefaction potential is proposed for engineering practice.

Dynamic stress intensity factor of a functionally graded material under antiplane shear loading

The dynamic response of a finite crack in an unbounded Functionally Graded Material (FGM) subjected to an antiplane shear loading is studied in this paper. The variation of the shear modulus of the functionally graded material is modeled by a quadratic increase along the direction perpendicular to the crack surface. The dynamic stress intensity factor is extracted from the asymptotic expansion of the stresses around the crack tip in the Laplace transform plane and obtained in the time domain by a numerical Laplace inversion technique. The influence of graded material property on the dynamic intensity factor is investigated. It is observed that the magnitude of dynamic stress intensity factor for a finite crack in such a functionally graded material is less than in the homogeneous material with a property identical to that of the FGM crack plane.

Theermal Stress and Fracture in Transparent Optical Materials due to Laser Energy-Absorption by a Defect

利用热弹性理论分析了在光学材料中由于缺陷吸收激光能量引起的温度和热应力分布,并且针对一个简单的裂纹模型分析了热应力产生的应力强度因子,给出了一些主要参数对于应力强度因子的影响的规律。

A further discussion on basic equations for two-phase flow: On collision stress of solid phase

The following points are argued: (i) there are two independent kinds of interaction on interfaces, i.e. the interaction between phases and the collision interaction, and the jump relations on interfaces can accordingly be resolved; (ii) the stress in a particle can also be divided into background stress and collision stress corresponding to the two kinds of interaction on interfaces respectively; (iii) the collision stress, in fact, has no jump on interface, so the averaged value of its derivative is equal to the derivative of its averaged value; (iv) the stress of solid phase in the basic equations for two\|phase flow should include the collision stress, while the stress in the expression of the inter\|phase force contains the background one only. Based on the arguments, the strict method for deriving the equations for two\|phase flow developed by Drew, Ishii et al. is generalized to the dense two\|phase flow, which involves the effect of collision stress.

Microstructure, strain fields and flow stress in deformed metal matrix composites

An experimental study of local orientations around whiskers in deformed metal matrix composites has been used to determine the strain gradients existing in the material following tensile deformation. These strain fields have been represented as arrays of geometrically necessary dislocations, and the material flow stress predicted using a standard dislocation hardening model. Whilst the correlation between this and the measured flow stress is reasonable, the experimentally determined strain gradients are lower by a factor of 5-10 than values obtained in previous estimates made using continuum plasticity finite element models. The local orientations around the whiskers contain a large amount of detailed information about the strain patterns in the material, and a novel approach is made to representing some of this information and to correlating it with microstructural observations. © 1998 Acta Metallurgica Inc. Published by Elsevier Science Ltd. All rights reserved.

A Thermodynamic Constitutive Model for Stress Induced Phase Transformation in Shape Memory Alloys

In this paper a thermodynamic constitutive model is developed for stress induced phase transformation in single crystalline and polycrystalline shape memory alloys (SMAs). Volume fractions of different martensite variants are chosen as internal variables to describe the evolution of microstructure state in the material. This model is then used in prediction the transformation behavior of a SMA (Cu-Al-Zn-Mn) under complex thermomechanical load (including complete and incomplete transformation in mechanical cycling, and proportional/non-proportional loading). (C) 2002 Elsevier Science Ltd. All rights reserved.

Influence of Surface Stress on Frequency of Microcantilever-Based Biosensors (vol 10, pg 307, 2004)

Microcantilever-based biosensors have been found increasing applications in physical, chemical, and biological fields in recent years. When biosensors are used in those fields, surface stress and mass variations due to bio-molecular binding can cause the microcantilever deform or the shift of frequency. These simple biosensors allow biologists to study surface biochemistry on a micro or nano scale and offer new opportunities in developing microscopic biomedical analysis with unique characteristics. To compare and illustrate the influence of the surface stress on the frequency and avoid unnecessary and complicated numerical solution of the resonance frequency, some dimensionless numbers are derived in this paper by making governing equations dimensionless. Meanwhile, in order to analyze the influence of the general surface stress on the frequency, a new model is put forward, and the frequency of the microcantilever is calculated by using the subspace iteration method and the Rayleigh method. The sensitivity of microcantilever is also discussed. (19 refs.)

Practical matching of principal stress field geometries in composite components

A simple composite design methodology has been developed from the basic principles of composite component failure. This design approach applies the principles of stress field matching to develop suitable reinforcement patterns around three-dimensional details such as lugs in mechanical components. The resulting patterns are essentially curvilinear orthogonal meshes, adjusted to meet the restrictions imposed by geometric restraints and the intended manufacturing process. Whilst the principles behind the design methodology can be applied to components produced by differing manufacturing processes, the results found from looking at simple generic example problems suggest a realistic and practical generic manufacturing approach. The underlying principles of the design methodology are described and simple analyses are used to help illustrate both the methodology and how such components behave. These analyses suggest it is possible to replace high-strength steel lugs with composite components whose strength-to-weight ratio is some 4-5 times better. © 1998 Elsevier Science Ltd. All rights reserved.

A New Analytical Model for Residual Stresses due to Thermal Surface Coating

发展了一种新的分析涂层结构（平板、梁）热残余应力的模型,可以研究骤冷过程(Quenching)和冷却过程(Cooling)在涂层结构内引发的残余应力分布。与以往模型相比,其优势在于：它可以考虑源于喷涂过程的涂层孔隙率、温度梯度等因素对于涂层和基底内残余应力的影响。其中孔隙率和温度分布由计算机模拟涂层沉积过程得到。另外,当基底的材料和几何参数被固定时,我们分析了诸如涂层的理想模量、厚度、热膨胀系数等参数,对于涂层结构中最终残余应力分布的改变机理。

High impulsivity predicting vulnerability to cocaine addiction in rats: some relationship with novelty preference but not novelty reactivity, anxiety or stress.

RATIONALE: Impulsivity is a vulnerability marker for drug addiction in which other behavioural traits such as anxiety and novelty seeking ('sensation seeking') are also widely present. However, inter-relationships between impulsivity, novelty seeking and anxiety traits are poorly understood. OBJECTIVE: The objective of this paper was to investigate the contribution of novelty seeking and anxiety traits to the expression of behavioural impulsivity in rats. METHODS: Rats were screened on the five-choice serial reaction time task (5-CSRTT) for spontaneously high impulsivity (SHI) and low impulsivity (SLI) and subsequently tested for novelty reactivity and preference, assessed by open-field locomotor activity (OF), novelty place preference (NPP), and novel object recognition (OR). Anxiety was assessed on the elevated plus maze (EPM) both prior to and following the administration of the anxiolytic drug diazepam, and by blood corticosterone levels following forced novelty exposure. Finally, the effects of diazepam on impulsivity and visual attention were assessed in SHI and SLI rats. RESULTS: SHI rats were significantly faster to enter an open arm on the EPM and exhibited preference for novelty in the OR and NPP tests, unlike SLI rats. However, there was no dimensional relationship between impulsivity and either novelty-seeking behaviour, anxiety levels, OF activity or novelty-induced changes in blood corticosterone levels. By contrast, diazepam (0.3-3 mg/kg), whilst not significantly increasing or decreasing impulsivity in SHI and SLI rats, did reduce the contrast in impulsivity between these two groups of animals. CONCLUSIONS: This investigation indicates that behavioural impulsivity in rats on the 5-CSRTT, which predicts vulnerability for cocaine addiction, is distinct from anxiety, novelty reactivity and novelty-induced stress responses, and thus has relevance for the aetiology of drug addiction.

Evaluación del efecto residual de los sistemas de labranza y control de malezas sobre la dinámica de las malezas, crecimiento y rendimiento del cultivo del frijol (Phaseolus vulgaris L.)

El ensayo se estableció en postrera de 1997 (octubre- diciembre), en la finca experimental La Compañía, ubicada en el municipio de San Marcos Carazo, con el objetivo de evaluar el efecto residual de sistemas de labranza y métodos de control de malezas sobre la dinámica de las malezas, crecimiento, desarrollo y rendimiento del frijol común ( Phaseolus vulgaris L. ). Los tratamientos en estudio fueron arreglados en bloques completos al azar, en un diseño de parcela dividida. Los factores en estudio fueron A: Sistemas de labranza (Cero, mínima y convencional) y B: métodos de control de malezas (químico, período crítico, limpia periódica). Los datos obtenidos fueron sometidos a un análisis de varianza y separación de medias a través de la prueba de rangos múltiples de Tukey, al 5 %. La diversidad de malezas en el área del experimento estuvo representada por 11 especies de la clase monocotiledóneas y 18 especies de la clase dicotiledóneas. Los resultados obtenidos en síntesis son los siguientes: En la abundancia y dominancia de las malezas (cobertura y peso seco), el mejor resultado lo presentó donde se realizaba la labranza mínima, para el caso de los controles el tratamiento que redujo mejor la abundancia fue donde se realizaba el control período crítico y en la dominancia donde se practicaba el control limpia periódica seguido del período critico, para las variables estudiadas abundancia, dominancia (cobertura y peso seco) no hubo efecto residual del experimento anterior después de un año de barbecho. No se presentó diferencias significativas por lo tanto no hubo efecto residual del experimento anterior después de un año de barbecho, para el factor labranza para las variables altura de plantas, número de plantas por hectárea, número de vainas por plantas, peso de mil granos, rendimiento de grano. En los controles no se presentaron diferencias significativas en las variables antes mencionadas por lo tanto no hubo efecto residual del experimento anterior después de un año de barbecho.

Factores ambientales que afectan la germinación de Dipsacus fullonum L; evaluación de temperatura, stress salino y osmótico

Resumen: Dipsacus fullonum es una especie conocida vulgarmente como carda, carda silvestre o cardencha, perteneciente a la familia Dipsacaceae. Es una maleza muy invasora que crece en sitios abiertos y resiste condiciones de sequía, inundación y salinidad. Conocer la tolerancia de esta especie a estos factores permitiría conocer su potencial área de infestación. Al presente esta información es escasa en la Argentina. Por otro lado, tampoco se dispone de información acerca del valor de sus temperaturas cardinales ni de la tolerancia al estrés salino u osmótico. Por ello, dentro de este marco teórico se evaluaron: i) el potencial agua base de germinación (ψb (50)) aplicando el modelo del hidrotiempo y ii) las temperaturas cardinales y iii) el tiempo térmico a germinación (TT). Para la obtención de estos parámetros se condujeron diferentes ensayos de germinación a las siguientes temperaturas: 5°C; 10°C; 15°C; 20°C; 25°C; 30°C y 35°C. Se calculó el porcentaje de semillas germinadas y el tiempo medio a germinación para todos los tratamientos térmicos. Fue observado que a medida que la temperatura aumentó, disminuía el tiempo medio a germinación (T50) y sólo en dos temperaturas estudiadas el porcentaje final no llegó al 100% (i.e. 5°C y 30°C) y a 35°C no se observó germinación. La temperatura base fue de 4,94ºC, la óptima fue 25,46ºC y la crítica fue 38,90ºC. El tiempo térmico para la etapa de germinación fue de 39,06ºCd. En los ensayos de stress osmótico y salino, se observó que a medida que las semillas fueron incubadas a potenciales más negativos el porcentaje de germinación final no varió excepto en los potenciales muy negativos (- 1 MPa en NaCl y -0,75MPa en PEG). En cambio, se observó un retraso en el inicio de la germinación. Estos resultados proponen que en coincidencia con sus características morfológicas, su hábito de crecimiento, su fácil dispersión y el amplio rango de condiciones ambientales donde la germinación alcanza elevados porcentajes permiten proponer que D. fullonum sea reportada en nuevas zonas.

Stress intensity factors for functionally graded solid cylinders

This paper presents the mode I stress intensity factors for functionally graded solid cylinders with an embedded penny-shaped crack or an external circumferential crack. The solid cylinders are assumed under remote uniform tension. The multiple isoparametric finite element method is used. Various types of functionally graded materials and different gradient compositions for each type are investigated. The results show that the material property distribution has a quite considerable in influence on the stress intensity factors. The influence for embedded cracks is quite different from that for external cracks.