Correlating Additives to Deterioration and Assessing the Effectiveness of Acrylic Coatings for the Protection of Rubber

Conservators have long been aware of the problems associated with the preservation of rubber objects due to inherent instability that can be attributed, in part, to the presence of additives. Inorganic additives, such as fillers, accelerators, stabilizers, and special ingredients are necessary in manufacturing to alter the properties of natural rubber. These materials all have different interactions with the rubber, and each other, and differing effects on the ageing process. To date, the most effective and accepted methods to preserve rubber are cold, dark storage of objects, or the use of low oxygen environments. While these methods are effective, they greatly limit access. The application of coatings to the surface of rubber objects can slow deterioration and greatly increase the ability of an institution to handle and display rubber objects. While numerous coatings for preventive and interventive treatment have been tested, none have been so successful to warrant routine use. The first section of this research highlighted the relationship between the inclusion of certain additives in natural rubber objects and the accelerated or slowed down overall degradation. In the second part of this research, the acrylic varnishes Golden Polymer Varnish with UVLS, Lascaux Acrylic Transparent Varnish-UV, Sennelier Matte Lacquer with UV Protection, and Liquitex Soluvar Varnish containing ultraviolet light absorbers or stabilizers were tested as a preventative coating for rubber. Through testing the visual and physical properties of the samples, as well as compound analysis the results of this research suggest that acrylic varnishes do provide protection, each to varying degrees. The results also provided insight into the behavior of rubber and these varnishes with continuing light exposure.

Compressive membrane action in composite floor slabs in the Cardington LBTF

This paper presents the results of an experimental study (the ultimate load capacity of composite metal decking/concrete floor slabs. Full-scale in situ testing of composite floor slabs was carried out in the Building Research Establishment's Large Building Test Facility (LBTF) at Cardington. A parallel laboratory test programme, which compared the behaviour of composite floor slabs strips, also carried out at Queen's University Belfast (QUB). Articular attention was paid to the contribution of compressive membrane action to the load carrying capacity. The results of both test programmes were compared with predictions by yield line theory and a theoretical prediction method in which the amount of horizontal restraint mid be assessed. The full-scale tests clearly demon-wed the significant contribution of compressive membrane effects to the load capacity of interior floor panels with a lesser contribution to edge/corner panels.

Modelling of saline intrusion in marine outfalls

Since their introduction in the 1950s, marine outfalls with diffusers have been prone to saline intrusion, a process in which seawater ingresses into the outfall. This can greatly reduce the dilution and subsequent dispersion of wastewater discharged, sometimes resulting in serious deterioration of coastal water quality. Although long aware of the difficulties posed by saline intrusion, engineers still lack satisfactory methods for its prediction and robust design methods for its alleviation. However, with recent developments in numerical methods and computer power, it has been suggested that commercially available computational fluid dynamics (CFD) software may be a useful aid in combating this phenomenon by improving understanding through synthesising likely behaviour. This document reviews current knowledge on saline intrusion and its implications and then outlines a model-scale investigation of the process undertaken at Queen's University Belfast, using both physical and CFD methods. Results are presented for a simple outfall configuration, incorporating several outlets. The features observed agree with general observations from full-scale marine outfalls, and quantify the intricate internal flow mechanisms associated with saline intrusion. The two-dimensional numerical model was found to represent saline intrusion, but in a qualitative manner, not yet adequate for design purposes. Specific areas requiring further development were identified. The ultimate aim is to provide a reliable, practical and cost effective means by which engineers can minimise saline intrusion through optimised outfall design.

Evaluation of Numeracy Skills in First Year Pharmacy Undergraduates 1999-2005

There is growing concern within the profession of pharmacy regarding the numerical competency of students completing their undergraduate studies. In this 7 year study, the numerical competency of first year pharmacy undergraduate students at the School of Pharmacy, Queen's University Belfast, was assessed both on entry to the MPharm degree and after completion of a basic numeracy course during the first semester of Level 1. The results suggest that students are not retaining fundamental numeracy concepts initially taught at secondary level education, and that the level of ability has significantly decreased over the past 7 years. Keywords: Numeracy; calculations; MPharm; assessment

SiGe HBTs on Bonded SOI Incorporating Buried Silicide Layers

The performance of silicon bipolar transistors has been significantly improved by the use of ultra narrow base layers of SiGe. To further improve device performance by minimising parasitic resistance and capacitance the authors produced an unique silicon-on-insulator (SOI) substrate incorporating a buried tungsten disilicide layer. This structure forms the basis of a recent submission by Zarlink Semiconductors ( Silvaco, DeMontfort & Queen�s) to DTI for high voltage devices for automotive applications. The Queen�s part of the original EPSRC project was rated as tending to outstanding.

Ion-Atom/Argon - Calculation of ionization cross sections by fast ion impact for neutral target atoms ranging from hydrogen to argon

A FORTRAN 90 program is presented which calculates the total cross sections, and the electron energy spectra of the singly and doubly differential cross sections for the single target ionization of neutral atoms ranging from hydrogen up to and including argon. The code is applicable for the case of both high and low Z projectile impact in fast ion-atom collisions. The theoretical models provided for the program user are based on two quantum mechanical approximations which have proved to be very successful in the study of ionization in ion-atom collisions. These are the continuum-distorted-wave (CDW) and continuum-distorted-wave eikonal-initial-state (CDW-EIS) approximations. The codes presented here extend previously published. codes for single ionization of. target hydrogen [Crothers and McCartney, Comput. Phys. Commun. 72 (1992) 288], target helium [Nesbitt, O'Rourke and Crothers, Comput. Phys. Commun. 114 (1998) 385] and target atoms ranging from lithium to neon [O'Rourke, McSherry and Crothers, Comput. Phys. Commun. 131 (2000) 129]. Cross sections for all of these target atoms may be obtained as limiting cases from the present code. Title of program: ARGON Catalogue identifier: ADSE Program summary URL: http://cpc.cs.qub.ac.uk/cpc/summaries/ADSE Program obtainable from: CPC Program Library Queen's University of Belfast, N. Ireland Licensing provisions: none Computer for which the program is designed and others on which it is operable: Computers: Four by 200 MHz Pro Pentium Linux server, DEC Alpha 21164; Four by 400 MHz Pentium 2 Xeon 450 Linux server, IBM SP2 and SUN Enterprise 3500 Installations: Queen's University, Belfast Operating systems under which the program has been tested: Red-hat Linux 5.2, Digital UNIX Version 4.0d, AIX, Solaris SunOS 5.7 Compilers: PGI workstations, DEC CAMPUS Programming language used: FORTRAN 90 with MPI directives No. of bits in a word: 64, except on Linux servers 32 Number of processors used: any number Has the code been vectorized or parallelized? Parallelized using MPI No. of bytes in distributed program, including test data, etc.: 32 189 Distribution format: tar gzip file Keywords: Single ionization, cross sections, continuum-distorted-wave model, continuum- distorted-wave eikonal-initial-state model, target atoms, wave treatment Nature of physical problem: The code calculates total, and differential cross sections for the single ionization of target atoms ranging from hydrogen up to and including argon by both light and heavy ion impact. Method of solution: ARGON allows the user to calculate the cross sections using either the CDW or CDW-EIS [J. Phys. B 16 (1983) 3229] models within the wave treatment. Restrictions on the complexity of the program: Both the CDW and CDW-EIS models are two-state perturbative approximations. Typical running time: Times vary according to input data and number of processors. For one processor the test input data for double differential cross sections (40 points) took less than one second, whereas the test input for total cross sections (20 points) took 32 minutes. Unusual features of the program: none (C) 2003 Elsevier B.V All rights reserved.

A new device for the study of electron-ion interactions: The Belfast EBIT

An electron beam ion trap ( EBIT) has been designed and is currently under construction for use in atomic physics experiments at the Queen's University, Belfast. In contrast to traditional EBITs where pairs of superconducting magnets are used, a pair of permanent magnets will be used to compress the electron beam. The permanent magnets have been designed in conjunction with bespoke vacuum ports to give unprecedented access for photon detection. Furthermore, the bespoke vacuum ports facillitate a versatile, reconfigurable trap structure able to accommodate various in-situ detectors and in-line charged particle analysers. Although the machine will have somewhat lower specifications than many existing EBITs in terms of beam current density, it is hoped that the unique features will facilitate a number of hitherto impossible studies involving interactions between electrons and highly charged ions. In this article the new machine's design is outlined along with some suggestions of the type of process to be studied once the construction is completed.

Energetics reveals physiologically distinct castes in a eusocial mammal.

Eusociality, which occurs among mammals only in two species of African mole-rat, is characterized by division of labour between morphologically distinct 'castes'1. In Damaraland mole-rats (Cryptomys damarensis), colony labour is divided between 'infrequent worker' and 'frequent worker' castes2. Frequent workers are active year-round and together perform more than 95% of the total work of the colony, whereas infrequent workers typically perform less than 5% of the total work3. Anecdotal evidence suggests that infrequent workers may act as dispersers, with dispersal being limited to comparatively rare periods when the soil is softened by moisture4, 5. Here we show that infrequent workers and queens increase their daily energy expenditure after rainfall whereas frequent workers do not. Infrequent workers are also fatter than frequent workers. We suggest that infrequent workers constitute a physiologically distinct dispersing caste, the members of which, instead of contributing to the work of the colony and helping the queen to reproduce, build up their own body reserves in preparation for dispersal and reproduction when environmental conditions are suitable.

Analysis of parameters of haemostasis in pre-eclamptic, normotensive pregnant and non-pregnant women.

Pregnancy is characterized by a state of heightened coagulation, which is exacerbated in pathological conditions such as pre-eclampsia (PET). PET is further associated with abnormal maternal inflammation and increased circulating microparticles (MP); however, a mechanistic link between these pathological features has never been established. It is proposed in this thesis that abnormal maternal inflammation is causally linked to pro-coagulant trophoblast MP shedding via a mechanism mediated by the pro-inflammatory cytokine tumour necrosis factor alpha (TNF), thereby contributing to maternal coagulopathies associated with PET. Using thromboelastography (TEG) and standard laboratory tests, haemostatic function was evaluated in PET and normotensive subjects at delivery and post-partum. Furthermore, the effects of the menstrual cycle and oral contraceptive (OC) use on haemostatic function were assessed in non-pregnant subjects in order to understand their influence on post-partum haemostasis. Plasma TNF and pro-coagulant MP levels were evaluated in the pregnant subjects. Using chorionic villi explants from human term placentas, MPs were quantified after TNF administration. The pro-coagulant potential of placental MPs was evaluated by TEG by spiking whole-blood with medium containing MPs from chorionic villi. TEG identified increased whole-blood coagulability in PET subjects at delivery, demonstrating its increased sensitivity over standard laboratory tests at identifying haemostatic alterations associated with PET. Haemostatic alterations were normalized by six weeks post-partum. TEG also identified cyclic haemostatic variations associated with OC use. Chorionic villi treated with TNF (1 ng/ml) shed significantly more MPs than untreated placentas. MPs from chorionic villi increased the coagulability of whole-blood. Together, results provide evidence supporting the concept that abnormal maternal inflammation is causally linked to the development of maternal coagulopathies in pregnancy complications. Moreover, TEG may be superior to standard laboratory tests in evaluating haemostasis in pregnant and non-pregnant subjects.