Analysis of the dominant enterprise information assurance mechanisms

The purpose of this study is to analyse current data continuity mechanisms employed by the target group of businesses and to identify any inadequacies in the mechanisms as a whole. The questionnaire responses indicate that 47% of respondents do perceive backup methodologies as important, with a total of 70% of respondents having some backup methodology already in place. Businesses in Moulton Park perceive the loss of data to have a significant effect upon their business’ ability to function. Only 14% of respondents indicated that loss of data on computer systems would not affect their business at all, with 54% of respondents indicating that there would be either a “major effect” (or greater) on their ability to operate. Respondents that have experienced data loss were more likely to have backup methodologies in place (53%) than respondents that had not experienced data loss (18%). Although the number of respondents clearly affected the quality and conclusiveness of the results returned, the level of backup methodologies in place appears to be proportional to the company size. Further investigation is recommended into the subject in order to validate the information gleaned from the small number of respondents.

Enhancing change detection in low-quality surveillance footage using markov random fields

Urban surveillance footage can be of poor quality, partly due to the low quality of the camera and partly due to harsh lighting and heavily reflective scenes. For some computer surveillance tasks very simple change detection is adequate, but sometimes a more detailed change detection mask is desirable, eg, for accurately tracking identity when faced with multiple interacting individuals and in pose-based behaviour recognition. We present a novel technique for enhancing a low-quality change detection into a better segmentation using an image combing estimator in an MRF based model.

Single-trial event-related potential analysis for brain-computer interfaces

Abstract. Different types of mental activity are utilised as an input in Brain-Computer Interface (BCI) systems. One such activity type is based on Event-Related Potentials (ERPs). The characteristics of ERPs are not visible in single-trials, thus averaging over a number of trials is necessary before the signals become usable. An improvement in ERP-based BCI operation and system usability could be obtained if the use of single-trial ERP data was possible. The method of Independent Component Analysis (ICA) can be utilised to separate single-trial recordings of ERP data into components that correspond to ERP characteristics, background electroencephalogram (EEG) activity and other components with non- cerebral origin. Choice of specific components and their use to reconstruct “denoised” single-trial data could improve the signal quality, thus allowing the successful use of single-trial data without the need for averaging. This paper assesses single-trial ERP signals reconstructed using a selection of estimated components from the application of ICA on the raw ERP data. Signal improvement is measured using Contrast-To-Noise measures. It was found that such analysis improves the signal quality in all single-trials.

A comparison of space weather analysis techniques used to predict the arrival of the Earth-directed CME and its shockwave launched on 8 April 2010

The Earth-directed coronal mass ejection (CME) of 8 April 2010 provided an opportunity for space weather predictions from both established and developmental techniques to be made from near–real time data received from the SOHO and STEREO spacecraft; the STEREO spacecraft provide a unique view of Earth-directed events from outside the Sun-Earth line. Although the near–real time data transmitted by the STEREO Space Weather Beacon are significantly poorer in quality than the subsequently downlinked science data, the use of these data has the advantage that near–real time analysis is possible, allowing actual forecasts to be made. The fact that such forecasts cannot be biased by any prior knowledge of the actual arrival time at Earth provides an opportunity for an unbiased comparison between several established and developmental forecasting techniques. We conclude that for forecasts based on the STEREO coronagraph data, it is important to take account of the subsequent acceleration/deceleration of each CME through interaction with the solar wind, while predictions based on measurements of CMEs made by the STEREO Heliospheric Imagers would benefit from higher temporal and spatial resolution. Space weather forecasting tools must work with near–real time data; such data, when provided by science missions, is usually highly compressed and/or reduced in temporal/spatial resolution and may also have significant gaps in coverage, making such forecasts more challenging.

Comparison of methods for analysis of proteolysis by plasmin in milk

Sensitive methods that are currently used to monitor proteolysis by plasmin in milk are limited due to 7 their high cost and lack of standardisation for quality assurance in the various dairy laboratories. In 8 this study, four methods, trinitrobenzene sulphonic acid (TNBS), reverse phase high pressure liquid 9 chromatography (RP-HPLC), gel electrophoresis and fluorescamine, were selected to assess their 10 suitability for the detection of proteolysis in milk by plasmin. Commercial UHT milk was incubated 11 with plasmin at 37 °C for one week. Clarification was achieved by isoelectric precipitation (pH 4·6 12 soluble extracts)or 6% (final concentration) trichloroacetic acid (TCA). The pH 4·6 and 6% TCA 13 soluble extracts of milk showed high correlations (R2 > 0·93) by the TNBS, fluorescamine and 14 RP-HPLC methods, confirming increased proteolysis during storage. For gel electrophoresis,15 extensive proteolysis was confirmed by the disappearance of α- and β-casein bands on the seventh 16 day, which was more evident in the highest plasmin concentration. This was accompanied by the 17 appearance of α- and β-casein proteolysis products with higher intensities than on previous days, 18 implying that more products had been formed as a result of casein breakdown. The fluorescamine 19 method had a lower detection limit compared with the other methods, whereas gel electrophoresis 20 was the best qualitative method for monitoring β-casein proteolysis products. Although HPLC was the 21 most sensitive, the TNBS method is recommended for use in routine laboratory analysis on the basis 22 of its accuracy, reliability and simplicity.

Measuring quality of life in aphasia: results from two scales

Background: Although aphasia affects quality of life (QoL), the impact within specific domains (e.g., psychosocial, communication) is poorly understood. Moreover, the complex and multidimensional nature of QoL renders it difficult to measure accurately using a single global scale. Aims: Using two recently developed QoL scales, the Stroke and Aphasia Quality of Life Scale-39, (SAQOL; Hilari, Byng, Lamping, & Smith, 2003a) and the American Speech Language Hearing Association’s Quality of Communication Life Scale (QCL; Paul et al., 2004), this study aimed to document the domains of QoL that were most affected for participants with aphasia compared to control participants, as well as to determine the relationship between the two scales, their sub-domains, and linguistic variables in aphasia. Methods & Procedures: The two scales were administered to a group of 19 participants with aphasia (14 male, 5 female), ages ranging from 27 to 79 years, and 19 age- and gender-matched control participants. Various types and severity of aphasia were represented in the aphasia group. The performances of aphasia and control groups were compared, and correlation analyses examined the relationship between the two scales and their sub-domains in the aphasia group only. Outcomes & Results: Compared to control participants, QoL was lower in participants with aphasia, with the communication sub-domain of SAQOL and socialisation/ activities sub-domain of QCL being the most affected areas of functioning. Between the two scales, the communication sub-domain of SAQOL correlated with the socialisation/ activities sub-domain and the QCL mean. Moreover, linguistic variables correlated strongly with psychosocial, communication and socialisation/activities sub-domains of QoL. Conclusions: Measuring QoL using the SAQOL and the QCL captures different but equally important aspects of experiences of living with aphasia. When interpreted together, they provide a holistic picture of functioning in aphasia that includes broad overviews of QoL from the SAQOL and a finer-grained analysis of communication impairments on QoL from the QCL.

Provider diversity in the NHS: impact on quality and innovation

The overall objective of the research project has been to assess the impact of provider diversity on quality and innovation in the NHS. The specific research aims were to identify the differences in performance between non-profit Third Sector organisations, for-profit private enterprises, and incumbent public sector institutions within the NHS as providers of health care services, as well as the factors that affect the entry and growth of new private and Third Sector providers. The study used both qualitative and quantitative methods based on case studies of four Local Health Economies (LHEs). Qualitative methods included documentary analysis and interviews with key informants and managers of both commissioning and provider organisations. To provide a focus to the study, two tracer conditions were followed: orthopaedic surgery and home health care for frail older people. In the case of hospital inpatient care, data on patient characteristics were also collected from the HES database. The analysis of this data provided preliminary estimates of the effects of provider type on quality, controlling for client characteristics and case mix. In addition, a survey of patient experience in diverse provider organisations was analysed to compare the different dimensions of quality of provision of acute services between incumbent NHS organisations and new independent sector treatment centres. The research has shown that, in respect of inpatient hospital services, diverse providers supply health services of at least as good quality as traditional NHS providers, and that there is ample opportunity to expand their scale and scope as providers of services commissioned by the NHS. The research used patient experience survey data to investigate whether hospital ownership affects the quality of services reported by NHS patients in areas other than clinical quality. The raw survey data appear to show that private hospitals provide higher quality services than the public hospitals. However, further empirical analysis leads to a more nuanced understanding of the performance differences. Firstly, the analysis shows that each sector offers greater quality in certain specialties. Secondly, the analysis shows that differences in the quality of patients’ reported experience are mainly attributable to patient characteristics, the selection of patients into each type of hospital, and the characteristics of individual hospitals, rather than to hospital ownership as such. Controlling for such differences, NHS patients are on average likely to experience a similar quality of care in a public or privately-run hospital. Nevertheless, for specific groups of patients and for specific types of treatments, especially the more straightforward ones, the private sector provides an improved patient experience compared to the public sector. Elsewhere, the NHS continues to provide a high quality service and outperforms the private sector in a range of services and for a range of clients.

Improvement of link failure restoration utilising multi-protocol label switching (MPLS) as a means to maintain quality of service (QOS)

This paper proposes a practical approach to the enhancement of Quality of Service (QoS) routing by means of providing alternative or repair paths in the event of a breakage of a working path. The proposed scheme guarantees that every Protected Node (PN) is connected to a multi-repair path such that no further failure or breakage of single or double repair paths can cause any simultaneous loss of connectivity between an ingress node and an egress node. Links to be protected in an MPLS network are predefined and a Label Switched path (LSP) request involves the establishment of a working path. The use of multi-protection paths permits the formation of numerous protection paths allowing greater flexibility. Our analysis examined several methods including single, double and multi-repair routes and the prioritization of signals along the protected paths to improve the Quality of Service (QoS), throughput, reduce the cost of the protection path placement, delay, congestion and collision. Results obtained indicated that creating multi-repair paths and prioritizing packets reduces delay and increases throughput in which case the delays at the ingress/egress LSPs were low compared to when the signals had not been classified. Therefore the proposed scheme provided a means to improve the QoS in path restoration in MPLS using available network resources. Prioritizing the packets in the data plane has revealed that the amount of traffic transmitted using a medium and low priority Label Switch Paths (LSPs) does not have any impact on the explicit rate of the high priority LSP in which case the problem of a knock-on effect is eliminated.

Distributed multimedia quality: the user perspective

Distributed multimedia supports a symbiotic infotainment duality, i.e. the ability to transfer information to the user, yet also provide the user with a level of satisfaction. As multimedia is ultimately produced for the education and / or enjoyment of viewers, the user’s-perspective concerning the presentation quality is surely of equal importance as objective Quality of Service (QoS) technical parameters, to defining distributed multimedia quality. In order to extensively measure the user-perspective of multimedia video quality, we introduce an extended model of distributed multimedia quality that segregates quality into three discrete levels: the network-level, the media-level and content-level, using two distinct quality perspectives: the user-perspective and the technical-perspective. Since experimental questionnaires do not provide continuous monitoring of user attention, eye tracking was used in our study in order to provide a better understanding of the role that the human element plays in the reception, analysis and synthesis of multimedia data. Results showed that video content adaptation, results in disparity in user video eye-paths when: i) no single / obvious point of focus exists; or ii) when the point of attention changes dramatically. Accordingly, appropriate technical- and user-perspective parameter adaptation is implemented, for all quality abstractions of our model, i.e. network-level (via simulated delay and jitter), media-level (via a technical- and user-perspective manipulated region-of-interest attentive display) and content-level (via display-type and video clip-type). Our work has shown that user perception of distributed multimedia quality cannot be achieved by means of purely technical-perspective QoS parameter adaptation.

An integrated dynamic whole life costing analysis for air distribution systems

Air distribution systems are one of the major electrical energy consumers in air-conditioned commercial buildings which maintain comfortable indoor thermal environment and air quality by supplying specified amounts of treated air into different zones. The sizes of air distribution lines affect energy efficiency of the distribution systems. Equal friction and static regain are two well-known approaches for sizing the air distribution lines. Concerns to life cycle cost of the air distribution systems, T and IPS methods have been developed. Hitherto, all these methods are based on static design conditions. Therefore, dynamic performance of the system has not been yet addressed; whereas, the air distribution systems are mostly performed in dynamic rather than static conditions. Besides, none of the existing methods consider any aspects of thermal comfort and environmental impacts. This study attempts to investigate the existing methods for sizing of the air distribution systems and proposes a dynamic approach for size optimisation of the air distribution lines by taking into account optimisation criteria such as economic aspects, environmental impacts and technical performance. These criteria have been respectively addressed through whole life costing analysis, life cycle assessment and deviation from set-point temperature of different zones. Integration of these criteria into the TRNSYS software produces a novel dynamic optimisation approach for duct sizing. Due to the integration of different criteria into a well- known performance evaluation software, this approach could be easily adopted by designers in busy nature of design. Comparison of this integrated approach with the existing methods reveals that under the defined criteria, system performance is improved up to 15% compared to the existing methods. This approach is interpreted as a significant step forward reaching to the net zero emission building in future.

Analysis of the intermediate housing market mechanism in the UK

Government policies have backed intermediate housing market mechanisms like shared equity, intermediate rented and shared ownership (SO) as potential routes for some households, who are otherwise squeezed between the social housing and the private market. The rhetoric deployed around such housing has regularly contained claims about its social progressiveness and role in facilitating socio-economic mobility, centring on a claim that SO schemes can encourage people to move from rented accommodation through a shared equity phase and into full owner-occupation. SO has been justified on the grounds of it being transitional state, rather than a permanent tenure. However SO buyers may be laden with economic cost-benefit structures that do not stack up evenly and as a consequence there may be little realistic prospect of ever reaching a preferred outcome. Such behaviours have received little empirical attention as yet despite, the SO model arguably offers a sub-optimal solution towards homeownership, or in terms of wider quality of life. Given the paucity of rigorous empirical work on this issue, this paper delineates the evidence so far and sets out a research agenda. Our analysis is based on a large dataset of new shared owners, observing an information base that spans the past decade. We then set out an agenda to further examine the behaviours of the SO occupants and to examine the implications for future public policy based on existing literature and our outline findings. This paper is particularly opportune at a time of economic uncertainty and an overriding ‘austerity’ drive in public funding in the UK, through which SO schemes have enjoyed support uninterruptedly thus far.

Improving sequence-based fold recognition by using 3D model quality assessment

Motivation: The ability of a simple method (MODCHECK) to determine the sequence–structure compatibility of a set of structural models generated by fold recognition is tested in a thorough benchmark analysis. Four Model Quality Assessment Programs (MQAPs) were tested on 188 targets from the latest LiveBench-9 automated structure evaluation experiment. We systematically test and evaluate whether the MQAP methods can successfully detect native-likemodels. Results: We show that compared with the other three methods tested MODCHECK is the most reliable method for consistently performing the best top model selection and for ranking the models. In addition, we show that the choice of model similarity score used to assess a model's similarity to the experimental structure can influence the overall performance of these tools. Although these MQAP methods fail to improve the model selection performance for methods that already incorporate protein three dimension (3D) structural information, an improvement is observed for methods that are purely sequence-based, including the best profile–profile methods. This suggests that even the best sequence-based fold recognition methods can still be improved by taking into account the 3D structural information.

A spatial–temporal analysis of the impact of access restrictions on forest landscapes and household welfare in Tanzania

This paper explores the impact of the re-introduction of access restrictions to forests in Tanzania, through participatory forest management (PFM), that have excluded villagers from forests to which they have traditionally, albeit illegally, had access to collect non-timber forest products (NTFPs). Motivated by our fieldwork, and using a spatial–temporal model, we focus on the paths of forest degradation and regeneration and villagers' utility before and after an access restriction is introduced. Our paper illustrates a number of key points for policy makers. First, the benefits of forest conservation tend to be greatest in the first few periods after an access restriction is introduced, after which the overall forest quality often declines. Second, villagers may displace their NTFP collection into more distant forests that may have been completely protected by distance alone before access to a closer forest was restricted. Third, permitting villagers to collect limited amounts of NTFPs for a fee, or alternatively fining villagers caught collecting illegally from the protected forest, and returning the fee or fine revenue to the villagers, can improve both forest quality and villagers' livelihoods.

The implications of the 2003 Common Agricultural Policy reforms for land use and landscape quality in England

The assessment of the potential landscape impacts of the latest Common Agricultural Policy reforms constitutes a challenge for policy makers and it requires the development of models that can reliably project the likely spatial distribution of land uses. The aim of this study is to investigate the impact of 2003 CAP reforms to land uses and rural landscapes across England. For this purpose we modified an existing economic model of agriculture, the Land-Use Allocation Model (LUAM) to provide outputs at a scale appropriate for informing a semi-quantitative landscape assessment at the level of ‘Joint Character Areas’ (JCAs). Overall a decline in the cereal and oilseed production area is projected but intensive arable production will persist in specific locations (East of England, East Midlands and South East), having ongoing negative effects on the character of many JCAs. The impacts of de-coupling will be far more profound on the livestock sector; extensification of production will occur in traditional mixed farming regions (e.g. the South West), a partial displacement of cattle by sheep in the upland regions and an increase in the sheep numbers is expected in the lowlands (South East, Eastern and East Midlands). This extensification process will affect positively those JCAs of mixed farming conditions, but it will have negative impacts on the JCAs of historically low intensity farming (e.g. the uplands of north-west) because they will suffer from under-management and land idling. Our analysis shows that the territorialisation between intensively and extensively agricultural landscapes will continue.