Evaluation of the probiotic potential and effect of encapsulation on survival for Lactobacillus plantarum ST16Pa isolated from papaya

Capability to produce antilisterial bacteriocins by lactic acid bacteria (LAB) can be explored by the food industry as a tool to increase the safety of foods. Furthermore, probiotic activity of bacteriogenic LAB brings extra advantages to these strains, as they can confer health benefits to the consumer. Beneficial effects depend on the ability of the probiotic strains to maintain viability in the food during shelf-life and to survive the natural defenses of the host and multiply in the gastrointestinal tract (GIT). This study evaluated the probiotic potential of a bacteriocinogenic Lactobacillus plantarum strain (Lb. plantarum ST16Pa) isolated from papaya fruit and studied the effect of encapsulation in alginate on survival in conditions simulating the human GIT. Good growth of Lb. plantarum ST16Pa was recorded in MRS broth with initial pH values between 5.0 and 9.0 and good capability to survive in pH 4.0, 11.0 and 13.0. Lb. plantarum ST16Pa grew well in the presence of oxbile at concentrations ranging from 0.2 to 3.0%. The level of auto-aggregation was 37%, and various degrees of co-aggregation were observed with different strains of Lb. plantarum, Enterococcus spp., Lb. sakei and Listeria, which are important features for probiotic activity. Growth was affected negatively by several medicaments used for human therapy, mainly anti-inflammatory drugs and antibiotics. Adhesion to Caco-2 cells was within the range reported for other probiotic strains, and PCR analysis indicated that the strain harbored the adhesion genes mapA, mub and EF-Tu. Encapsulation in 2, 3 and 4% alginate protected the cells from exposure to 1 or 2% oxbile added to MRS broth. Studies in a model simulating the transit through the GIT indicated that encapsulated cells were protected from the acidic conditions in the stomach but were less resistant when in conditions simulating the duodenum, jejunum, ileum and first section of the colon. To our knowledge, this is the first report on a bacteriocinogenic LAB isolated from papaya that presents application in food biopreservation and may be beneficial to the consumer health due to its potential probiotic characteristics.

Different protocols to produce artificial dentine carious lesions in vitro and in situ: hardness and mineral content correlation

This study compared dentine demineralization induced by in vitro and in situ models, and correlated dentine surface hardness (SH), cross-sectional hardness (CSH) and mineral content by transverse microradiography (TMR). Bovine dentine specimens (n = 15/group) were demineralized in vitro with the following: MC gel (6% carboxymethylcellulose gel and 0.1 m lactic acid, pH 5.0, 14 days); buffer I (0.05 m acetic acid solution with calcium, phosphate and fluoride, pH 4.5, 7 days); buffer II (0.05 m acetic acid solution with calcium and phosphate, pH 5.0, 7 days), and TEMDP (0.05 m lactic acid with calcium, phosphate and tetraethyl methyl diphosphonate, pH 5.0, 7 days). In an in situ study, 11 volunteers wore palatal appliances containing 2 bovine dentine specimens, protected with a plastic mesh to allow biofilm development. The volunteers dripped a 20% sucrose solution on each specimen 4 times a day for 14 days. In vitro and in situ lesions were analyzed using TMR and statistically compared by ANOVA. TMR and CSH/SH were submitted to regression and correlation analysis (p < 0.05). The in situ model produced a deep lesion with a high R value, but with a thin surface layer. Regarding the in vitro models, MC gel produced only a shallow lesion, while buffers I and II as well as TEMDP induced a pronounced subsurface lesion with deep demineralization. The relationship between CSH and TMR was weak and not linear. The artificial dentine carious lesions induced by the different models differed significantly, which in turn might influence further de- and remineralization processes. Hardness analysis should not be interpreted with respect to dentine mineral loss

Accuracy, precision and robustness of different methods to obtain samples from silages in fermentation studies

The objective of this study was to evaluate accuracy, precision and robustness of two methods to obtain silage samples, in comparison with extraction of liquor by manual screw-press. Wet brewery residue alone or combined with soybean hulls and citrus pulp were ensiled in laboratory silos. Liquor was extracted by a manual screw-press and a 2-mL aliquot was fixed with 0.4 mL formic acid. Two 10-g silage samples from each silo were diluted in 20 mL deionized water or 17% formic acid solution (alternative methods). Aliquots obtained by the three methods were used to determine the silage contents of fermentation end-products. The accuracy of the alternative methods was evaluated by comparing mean bias of estimates obtained by manual screw-press and by alternative methods, whereas precision was assessed by the root mean square prediction error and the residual error. Robustness was determined by studying the interaction between bias and chemical components, pH, in vitro dry matter digestibility (IVDMD) and buffer capacity. The 17% formic acid method was more accurate for estimating acetic, butyric and lactic acids, although it resulted in low overestimates of propionic acid and underestimates of ethanol. The deionized water method overestimated acetic and propionic acids and slightly underestimated ethanol. The 17% formic acid method was more precise than deionized water for estimating all organic acids and ethanol. The robustness of each method with respect to variation in the silage chemical composition, IVDMD and pH is dependent on the fermentation end-product at evaluation. The robustness of the alternative methods seems to be critical at the determination of lactic acid and ethanol contents.

Contribuição da inclusão de polpa cítrica e casca de soja para a qualidade da silagem de resíduo úmido de cervejaria

Com o objetivo de avaliar a produção da silagem e o uso de aditivos no processo de ensilagem do resíduo úmido de cervejaria, foram realizados 5 tratamentos: controle (C: ensilagem de 100% de resíduo úmido de cervejaria); PC15 (15% de polpa cítrica); PC30 (30% de polpa cítrica); CS15 (15% de casca de soja); CS30 (30% de casca de soja) – com base na matéria fresca do resíduo de cervejaria. As silagens foram confeccionadas em baldes plásticos com 252mm de altura e 245mm de diâmetro (0,06174m³), e amostras foram coletadas para análises bromatológicas, pH, nitrogênio amoniacal, digestão in vitro de matéria seca, ácidos orgânicos e perfil microbiológico. Os resultados foram analisados pelo programa computacional Statistical Analysis System (Statistical..., 1985), sendo verificada a normalidade dos resíduos pelo Teste de Shapiro-Wilk (PROC UNIVARIATE), e as variâncias, pelo Teste de Hartley. Os efeitos dos níveis de adição foram separados por meio de contrastes polinomiais utilizando o nível de significância de 5%. Houve aumento do teor de matéria seca, carboidratos solúveis, ácido lático, digestão in vitro de matéria seca, da população de bactérias ácido láticas e redução do pH, ácido butírico, propiônico e nitrogênio amoniacal a partir das inclusões de polpa cítrica e casca de soja, sendo os melhores resultados encontrados para o tratamento com inclusão de 30% de polpa cítrica (P<0,05). A ensilagem do bagaço de malte por si só é uma alternativa para o produtor rural como suporte alimentar e confecção de silagem de qualidade que pode ser incrementada com o uso de aditivos a serem avaliados de acordo com a relação custo-benefício para eficiência da produção

Dielectric properties of cobalt ferrite nanoparticles in ultrathin nanocomposite films

Multilayered nanocomposite films (thickness 50-90 nm) of cobalt ferrite nanoparticles (np-CoFe2O4, 18 nm) were deposited on top of interdigitated microelectrodes by the layer-by-layer technique in order to study their dielectric properties. For that purpose, two different types of nanocomposite films were prepared by assembling np-CoFe2O4 either with poly(3,4-ethylenedioxy thiophene):poly(styrene sulfonic acid) or with polyaniline and sulfonated lignin. Despite the different film architectures, the morphology of both was dominated by densely-packed layers of nanoparticles surrounded by polyelectrolytes. The dominant effect of np-CoFe2O4 was also observed after impedance spectroscopy measurements, which revealed that dielectric behavior of the nanocomposites was largely influenced by the charge transport across nanoparticle-polyelectrolyte interfaces. For example, nanocomposites containing np-CoFe2O4 exhibited a single low-frequency relaxation process, with time constants exceeding 15 ms. At 1 kHz, the dielectric constant and the dissipation factor (tan ᵟ) of these nanocomposites were 15 and 0.15, respectively. These values are substantially inferior to those reported for pressed pellets made exclusively of similar nanoparticles. Impedance data were further fitted with equivalent circuit models from which individual contributions of particle's bulk and interfaces to the charge transport within the nanocomposites could be evaluated. The present study evidences that such nanocomposites display a dielectric behavior dissimilar from that exhibited by their individual counterparts much likely due to enlarged nanoparticle- polyelectrolyte interfaces.

Structural and Interaction Studies of Bacterial Polysaccharides by NMR Spectroscopy

An introduction to bacterial polysaccharides and the methods for structural determination are described in the first two parts of the thesis. In a structural elucidation of bacterial polysaccharides NMR experiments are important as is component analysis. A short description of immunochemical methods such as enzyme immunoassays is included. Two NMR techniques used for interaction studies, trNOE and STD NMR, are also discussed. The third part of the thesis discusses and summarizes the results from the included papers. The structures of the exopolysaccharides produced by two lactic acid bacteria are determined by one- and two dimensional NMR experiments. One is a heteropolysaccharide produced by Streptococcus thermophilus and the other a homopolysaccharide produced by Propionibacterium freudenreichii. The structure of an acidic polysaccharide from a marine bacterium with two serine residues in the repeating unit is also investigated. The structural and immunological relationship between two O-antigenic polysaccharides from Escherichia coli strain 180/C3 and O5 is discussed and investigated. Finally, interaction studies of an octasaccharide derived from the Salmonella enteritidis O-antigen and a bacteriophage are described which were performed with NMR experiments.

Food safety in wine: optimization of analytical controls and evaluation of production technologies

This PhD thesis has been proposed to validate and then apply innovative analytical methodologies for the determination of compounds with harmful impact on human health, such as biogenic amines and ochratoxin A in wines. Therefore, the influence of production technology (pH, amino acids precursor and use of different malolactic starters) on biogenic amines content in wines was evaluated. An HPLC method for simultaneous determination of amino acids and amines with precolumnderivatization with 9-Fluorenyl-methoxycarbonyl chloride (FMOC-Cl) and UV detection was developed. Initially, the influence of pH, time of derivatization, gradient profile were studied. In order to improve the separation of amino acids and amines and reduce the time of analysis, it was decided to study the influence of different flows and the use of different columns in the chromatographic method. Firstly, a C18 Luna column was used and later two monolithic columns Chromolith in series. It appeared to be suitable for an easy, precise and accurate determination of a relatively large number of amino acids and amines in wines. This method was then applied on different wines produced in the Emilia Romagna region. The investigation permitted to discriminate between red and white wines. Amino acids content is related to the winemaking process. Biogenic amines content in these wines does not represent a possible toxicological problem for human health. The results of the study of influence of technologies and wine composition demonstrated that pH of wines and amino acids content are the most important factors. Particularly wines with pH > 3,5 show higher concentration of biogenic amines than wines with lower pH. The enrichment of wines by nutrients also influences the content of some biogenic amines that are higher in wines added with amino acids precursors. In this study, amino acids and biogenic amines are not statistically affected by strain of lactic acid bacteria inoculated as a starter for malolactic fermentation. An evaluation of different clean-up (SPE-MycoSep; IACs and LLE) and determination methods (HPLC and ELISA) of ochratoxin A was carried out. The results obtained proved that the SPE clean-up are reliable at the same level while the LLE procedures shows lowest recovery. The ELISA method gave a lower determination and a low reproducibility than HPLC method.

Zuckertransport und Regulation des Hexosestoffwechsels bei Oenococcus oeni

Das Milchsäurebakterium Oenococcus oeni, welches für den biologischen Säureabbau im Wein eingesetzt wird, verstoffwechselt Hexosen über den Phosphoketolaseweg. Dabei können beträchtliche Mengen Acetat entstehen. Die Ursachen dafür wurden untersucht, insbesondere der Fructosestoffwechsel. Außerdem wurde der Hexosetransport untersucht, über den bei O. oeni noch nichts bekannt war. Die Aufnahme von Hexosen in die Zelle erfolgt mit hoher Affinität (KM=10 µM) über einen Symport mit H+, aber mit sehr niedriger spezifischer Aktivität (Vmax=9 U / g TG). Zusätzlich werden Hexosen mit ausreichender Aktivität über (vermutlich erleichterte) Diffusion in die Zelle transportiert, allerdings nur bei hohen Hexosekonzentrationen. Es wurden Gene gefunden, die für ein Hexose- Phosphotransferasesystem kodieren, welches in O. oeni keine bedeutende Rolle beim Transport spielt, aber vermutlich eine regulative Funktion hat. Zur Bildung von Essigsäure tragen verschiedene Faktoren bei: Der Ethanolweg, der in der heterofermentativen Milchsäuregärung die Reoxidation von NAD(P)H bewerkstelligt, ist durch die niedrige spezifische Aktivität der Acetaldehyddehydrogenase limitiert. Diese Limitierung wird noch verstärkt, wenn die zellulären Gehalte von Coenzym A aufgrund von Pantothensäuremangel niedrig sind. O. oeni umgeht durch Bildung von Erythrit die Limitierung, und Acetylphosphat wird nicht zu Ethanol reduziert, sondern als Acetat ausgeschieden. Bei Cofermentation von Hexosen mit externen Elektronenakzeptoren, wie Fructose, Pyruvat oder Sauerstoff, werden letztere zur Reoxidation von NAD(P)H genutzt, und als Folge wird Acetat ausgeschieden. Der Fluss von Fructose in den Phosphoketolaseweg wird durch das Enzym Phosphoglucoseisomerase verhindert, wenn dieses durch 6-Phosphogluconat gehemmt wird. Als Konsequenz wird Fructose im Mannitweg reduziert, was die Bildung von Essigsäure im Phosphoketolaseweg fördert. Bei niedrigen Wachstums- und Stoffwechselraten, z.B. bei C-Limitierung, ist der Ethanolweg nicht limitierend für den Stoffwechsel, und Hexosen werden über heterofermentative Milchsäuregärung umgesetzt, ohne daß Acetat entsteht. Pyruvat kann gleichzeitig als Elektronenakzeptor und als Energiequelle dienen: O. oeni ist in der Lage, Pyruvat mittels Disproportionierung zu Lactat und Acetat+CO2 zu fermentieren, und dabei Energie zu konservieren (0,5 ATP / Pyruvat).

Oxylipins biosynthesis in Lactobacillus helveticus in the presence of oxidative stress

This PhD thesis is aimed at studying the possible pathways and the mechanisms that can trigger oxylipins biosynthesis, and particularly that of short chain aldehydes and alcohols, in Lactobacillus helveticus, also in the presence of oxidative stress, using a totally labelled linoleic acid as precursor. In plants and fungi these molecules, involved in defence mechanisms against pathogens and in communication systems, derive from the oxidation of cellular unsaturated fatty acids (UFAs) and their accumulation is associated with stress exposure. Since some oxylipins are produced also by lactobacilli, it is possible to hypothesize that a metabolic pathway from UFAs to oxylipins, similar to what happens in plants and fungi, is present also in lactic acid bacteria. The results obtained pointed out that some volatile molecules are the result of UFAs catabolism, since they appear only when cells are incubated in their presence. Labelled linoleic acid is integrated in the membrane and subsequently transformed into aldehydes and alcohols, whose extent and carbon atoms number depend on stress exposure. The enzymes responsible for this metabolic pathway in plants and fungi (e.g. lipoxygenase, dioxygenase) seem to be absent in Lactobacillus helveticus and in other lactobacilli. Proteomic analyses show the over expression of many proteins, including thioredoxin reductase (part of the bacterial oxidative defence system), mainly in cells grown with linoleic acid without oxidative stress exposure, confirming that linoleic acid itself induces oxidative stress. 6 general oxidoreductases (class including dioxygenases and peroxidase) were found and therefore a deeper investigation on them could be productive in elucidating all steps involved in oxylipins biosynthesis in bacteria. Due to the multiple role of oxylipins (flavouring agents, antimicrobial compounds and interspecific signalling molecules) the identification of genes involved and regulating factors should have an important biotechnological impact, also allowing the overproduction of selected bioactive molecules.

Sviluppo di un metodo elettrochimico per la determinazione della capacità antiossidante

The aim of the present thesis, carried out at the Analytical Group of the Faculty of Industrial Chemistry in Bologna, is to develop a new electrochemical method for the determination of the Antioxidant Capacity (AOC). The approach is based on the deposition of a non-conducting polymeric film on the working electrode surface and the following exposition to the radicals OH· produced by H2O2 photolysis. The strongly oxidant action of hydroxyl radicals degrades, causing an increase of the Faradic current, relevant to the redox couple [Ru(NH3)6]2+/3+ monitored by cyclic voltammetry(CV); the presence of an antioxidant compound in solution slows down the radical action, thus protecting the polymeric film and blocking the charge transfer. The parameter adopted for the quantification of the AOC, was the induction time, called also lag phase, which is the time when the degradation of the film starts. Five pure compounds, among most commonly antioxidant, were investigated : Trolox®(an analogue water-soluble of vitamin E), (L)-ascorbic acid, gallic acid, pyrogallol and (-)- epicatechin. The AOC of each antioxidant was expressed by TEAC index (Trolox® Equivalent Antioxidant Capacity), calculated from the ratio between the slope of the calibration curve of the target compound and the slope of the calibration curve of Trolox®. The results from the electrochemical method, have been compared with those obtained from some other standardized methods, widely employed. The assays used for the comparison, have been: ORAC, a spectrofluorimetric method based on the decrease of fluorescein emission after the attack of alkylperoxide radicals, ABTS and DPPH that exploit the decoloration of stable nitrogen radicals when they are reduced in presence of an antioxidant compound and, finally, a potentiometric method based on the response of the redox couple [Fe(CN)6]3-/ [Fe(CN)6]4-. From the results obtained from pure compounds, it has been found that ORAC is the methodology showing the best correlation with the developed electrochemical method, maybe since similar radical species are involved. The comparison between the considered assays, was also extended to the analysis of a real sample of fruit juice. In such a case the TEAC value resulting from the electrochemical method is higher than those from standardized assays.

New proton conducting membranes for fuel cell applications

In order to synthesize proton-conducting materials which retain acids in the membrane during fuel cell operating conditions, the synthesis of poly(vinylphosphonic acid) grafted polybenzimidazole (PVPA grafted PBI) and the fabrication of multilayer membranes are mainly focussed in this dissertation. Synthesis of PVPA grafted PBI membrane can be done according to "grafting through" method. In "grafting through" method (or macromonomer method), monomer (e.g., vinylphosphonic acid) is radically copolymerized with olefin group attached macromonomer (e.g., allyl grafted PBI and vinylbenzyl grafted PBI). This approach is inherently limited to synthesize graft-copolymer with well-defined architectural and structural parameters. The incorporation of poly(vinylphosphonic acid) into PBI lead to improvements in proton conductivity up to 10-2 S/cm. Regarding multilayer membranes, the proton conducting layer-by-layer (LBL) assembly of polymers by various strong acids such as poly(vinylphosphonic acid), poly(vinylsulfonic acid) and poly(styrenesulfonic acid) paired with basic polymers such as poly(4-vinylimidazole) and poly(benzimidazole), which are appropriate for ‘Proton Exchange Membranes for Fuel Cell’ applications have been described. Proton conductivity increases with increasing smoothness of the film and the maximum measured conductivity was 10-4 S/cm at 25°C. Recently, anhydrous proton-conducting membranes with flexible structural backbones, which show proton-conducting properties comparable to Nafion have been focus of current research. The flexible backbone of polymer chains allow for a high segmental mobility and thus, a sufficiently low glass transition temperature (Tg), which is an essential factor to reach highly conductive systems. Among the polymers with a flexible chain backbone, poly(vinylphosphonic acid), poly(vinylbenzylphosphonic acid), poly(2-vinylbenzimidazole), poly(4-styrenesulfonic acid), poly(4-vinylimidazole), poly(4-vinylimidazole-co-vinylphosphonic acid) and poly(4-vinylimidazole-co-4-styrenesulfonic acid) are interesting materials for fuel cell applications. Synthesis of polybenzimidazole with anthracene structural unit was carried out in order to avoid modification reaction in the imidazole ring, because anthracene would encourage the modification reaction with an olefin by Diels-Alder reaction.

Ion channels in mixed tethered bilayer lipid membranes

Mixed tethered bilayer lipid membranes (tBLMs) are described based on the self-assembly of a monolayer on template stripped gold, of an archea analogue thiolipid, 2,3-di-o-phytanyl-sn-glycerol-1-tetraethylene glycol-D,L--lipoic acid ester lipid (DPTL), and a newly designed dilution molecule, tetraethylene glycol-D,L--lipoic acid ester (TEGL). The usage of spacer and addition of extra dilution molecules between the substrate and the bilayer is that this architecture provides an ionic reservoir underneath the membrane, avoiding direct contact of the embedded membrane proteins with the gold electrodes and increasing the lateral diffusion of the bilayer, thus allowing for the incorporation of complex channels proteins which are failed in non-diluted systems. The tBLM is completed by fusion of liposomes made from a mixture of 1,2-diphythanolyl-sn-glycero-3-phosphocholine (DPhyPC), cholesterol, and 1,2-diphytanoyl-sn-Glycero-3-phosphate (DPhyPG) in a molar ratio of 6:3:1. Varying the mixing ratio, the optimum mixing ratio was obtained at a dilution factor of DPTL and TEGL at 90%:10%. Only under these conditions, the mixed tBLM showed electrical properties, as shown by EIS, which are comparable to a BLM. With higher dilution factors, a defect-free lipid bilayer was not formed. Formation of bilayers have been characterized by different techniques, such as surface plasmon resonance (SPR), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and quartz crystal microbalance (QCM). Different proteins such as hemolysin, melittin, gramicidin, M2, Maxi-K, nAChR and bacteriohodopsin are incorporated into these tBLMs as shown by SPR and EIS studies. Ionic conductivity at 0 V vs. Ag|AgCl, 3M KCl were measured by EIS measurements. Our results indicate that these proteins have been successfully incorporated into a very stable tBLM environment in a functionally active form. Therefore, we conclude that the mixed tBLMs have been successfully designed as a general platform for biosensing and screening purposes of membrane proteins.

Entwicklung und Anwendung molekularbiologischer Methoden zur Art- und Stamm-Identifizierung pro- und eukaryotischer Organismen

Das Wachstum von Milchsäurebakterien-Arten der Gattungen Lactobacillus, Pediococcus und Leuconostoc während der Weinfermentation kann durch die Bildung verschiedener Stoffwechselprodukte zu Weinfehlern führen. Um rechtzeitig Gegenmaßnahmen ergreifen zu können und einem Weinverderb vorzubeugen, bedarf es geeigneter Identifizierungsmethoden. Klassische mikrobiologische Methoden reichen oft nicht aus, um Mikroorganismen auf Art- und Stammniveau gezielt zu identifizieren. Wegen ihrer schnellen Durchführbarkeit und Zuverlässigkeit sind molekularbiologische Identifizierungsmethoden zur Kontrolle der mikrobiellen Flora während der Lebensmittelfermentierung in der heutigen Zeit unabdingbar. In der vorliegenden Forschungsarbeit wurden die 23S rRNA-Gensequenzen von neun Pediococcus-Typstämmen sequenziert, analysiert und phylogenetische Analysen durchgeführt. Zur Art-Identifizierung der Pediokokken wurden PCR-Primer generiert und ein Multiplex PCR System entwickelt, mit dem alle typischen Arten simultan in einer Reaktion nachgewiesen werden konnten. Die Ergebnisse der Multiplex PCR-Identifizierung von 62 Pediococcus-Stämmen aus Kulturensammlungen und 47 neu isolierten Stämmen aus Wein zeigten, dass einige Stämme unter falschen Artnamen hinterlegt waren, und dass P. parvulus im Weinanbaugebiet Rheinhessen weit verbreitet war. Die Fähigkeit der Pediococcus-Stämme zur Exopolysaccharid-Synthese wurde durch den Nachweis zweier Gene überprüft. Auf Basis der 23S rDNA-Sequenzen wurden rRNA-Sekundärstrukturen mit der neu entwickelten Software Structure Star generiert, die zum Auffinden von Zielbereichen für fluoreszenzmarkierte DNA-Sonden geeignet waren. Die Sequenzunterschiede zwischen den Pediococcus-Arten reichten aus, um zwei Gruppen durch Fluoreszenz in situ Hybridisierung differenzieren zu können. Die Verwendung unmarkierter Helfer-sonden verbesserte die Zugänglichkeit der Sonden an die rRNA, wodurch das Fluoreszenz-Signal verstärkt wurde. Um Milchsäurebakterien durch Denaturierende Gradienten Gel Elektrophorese differenzieren zu können, wurden Primer entwickelt, mit denen ein hochvariabler 23S rDNA-Bereich amplifiziert werden konnte. Die Nested Specifically Amplified Polymorphic DNA (nSAPD)-PCR wurde in der vorliegenden Arbeit zur Art- und Stamm-Differenzierung pro- und eukaryotischer Organismen angewandt. Es wurden vor allem weinrelevante Milchsäurebakterien der Gattungen Oenococcus, Lactobacillus, Pediococcus und Leuconostoc und Hefen der Gattungen Dekkera / Brettanomyces und Saccharomyces untersucht. Die Cluster-Analyse der Pediococcus-Typstämme führte zu einer unterschiedlichen Baum-Topologie im Vergleich zum phylogenetischen 23S rDNA-Stammbaum. Die Verwandtschaftsverhältnisse der untersuchten O. oeni-Stämme aus Starterkulturen konnten in Bezug auf eine frühere Cluster-Analyse reproduziert werden. Die Untersuchung von 40 B. bruxellensis-Stämmen aus rheinhessischen Weinproben zeigte eine Gruppierung der Stämme gemäß dem Ort der Probennahme. Beim Vergleich der Verwandtschaftsverhältnisse von Stämmen der Arten P. parvulus und B. bruxellensis, die aus denselben Weinproben isoliert wurden, konnte eine hohe Übereinstimmung der beiden Baum-Topologien beobachtet werden. Anhand der SAPD-PCR Untersuchung von Sekthefen aus Starterkulturen konnten alle Stämme der Art S. cerevisiae zugeordnet werden. Die nSAPD-PCR war darüber hinaus geeignet, um höhere Eukaryoten wie Weinreben zu differenzieren und es konnten die Verwandtschaftsverhältnisse von Mäusen und menschlichen Individuen durch Cluster-Analysen nachvollzogen werden. Mit Hilfe der Sequence Characterized Amplified Region (SCAR)-Technik wurden (n)SAPD-Marker in SCAR-Marker konvertiert. Die neu generierten SCAR-Primer konnten zur simultanen Art-Identifizierung von sieben weinschädlichen Milchsäurebakterien in einer Multiplex PCR erfolgreich eingesetzt werden. Die in dieser Arbeit entwickelten molekularbiologischen Identifizierungsmethoden können zum Beispiel in der mikrobiologischen Qualitätskontrolle Anwendung finden.

Development of guidelines for microbiological control in microbrewery

Over the past 15 years the Italian brewing scene showed interesting changes, especially with regard to the creation of many breweries with an annual production of less than 10,000 hectoliters. The beers produced by microbreweries are very susceptible to attack by spoilage micro-organisms that cause the deterioration of beer quality characteristics. In addition, most of the microbreweries do not practice heat treatments of stabilization and do not carry out quality checks on the product. The high presence of beer spoilage bacteria is an economic problem for the brewing industry because it can damage the brand and it causes high costs of product retrieval. This thesis project was aimed to study the management of the production process in the Italian microbreweries within a production less than 10,000 hl. In particular, the annual production, type of plant, yeast management, process management, cleaning and sanitizing of a representative sample of microbreweries were investigated. Furthermore was made a collection of samples in order to identify, with simple methods, what are spoilage bacteria more present in the Italian craft beers. 21% of the beers analysed were positive at the presence of lactic acid bacteria. These analytical data show the importance of understanding what are the weak points of the production process that cause the development of spoilage bacteria. Finally, the thesis examined the actual production of two microbreweries in order to understand the process management that can promote the growth of spoilage bacteria in beer and production plant. The analysis of the data for the two case studies was helpful to understand what are the critical points where the microorganisms are most frequently in contact with the product. The hygiene practices are crucial to ensure the quality of the finished product, especially in the case of non-pasteurized beer.

Use of essential oils and biocontrol cultures for the improvement of shelf-life of fresh cut products

The demand of minimally processed fruits and vegetables has increased in the last years. However, their intrinsic characteristics may favor the growth of pathogens and spoilage microbiota. The negative effects on human health reported for some traditional chemical sanitizers have justified the search for substitutes to guarantee food safety and quality. In this work we have evaluate the potential of some essential oils and their components to improve the safety and the shelf life of Lamb’s lettuce (Valerianella locusta) and apples (Golden delicious). Moreover, the effects of selected lactic acid bacteria alone or in combination with essential oils or their components, on the shelf-life and safety as well as organoleptic properties of minimally processed products, were evaluated. Since the lack of knowledge of microbial cell targets of essential oils represent one of the most important limit to the use of these molecules at industrial level, another aim of this thesis was the study of the action mechanisms of essential oils and their components. The results obtained showed the beneficial effects of the natural antimicrobials as well as the selected lactic acid bacteria on minimally processed fruit and vegetable safety and shelf-life, without detrimental effects on the quality parameters. The beneficial effects obtained by the use of the selected biocontrol agents were further increased combining them with selected natural antimicrobials. The natural antimicrobial employed induced noticeable modifications of membrane fatty acid profiles and volatile compounds produced by microbial cells during the growth. The modification of the expression in genes involved in fatty acid biosynthesis suggesting that the cytoplasmic membrane of microbial cells is one of the major cellular target of essential oils and their components. The comprehension of microbial stress response mechanisms can contribute to the scaling up of natural antimicrobials and bio-control agents at industrial level.