Lychee propagation (Litchi chinensis Sonn.): A comparative study of rootstocks

The lychee (Litchi chinensis Sonnerat), of the family Sapindaceae, is a highly valued fruit throughout the world. It is native to southern China, but it is cultivated in many parts of the world. In Brazil, the cultivation of the lychee was initiated in the 1970s in the State of São Paulo and has been increasing in production even though the crop size still averages only 1.4 ha per producer. The low crop size is attributed to the high cost of seedlings and the amount of time required for the plant to bear fruit. These factors discourage planting in large areas. The purpose of this research is to study some aspects of what is vitally important for the production of lychee seedlings on a large scale, with low cost and good genetic quality. Tests were performed using rootstocks from seeds of lychee and longan (Euphoria longan Lam.). Scions for grafting were taken from plants of lychee 'Bengal' in the collection of fruit species from FCAV-UNESP, Campus of Jaboticabal, Brazil. The experiments were started in September 2007 and the grafting process was performed in each month of the year finishing in August 2008. During this period the influence of these criteria were evaluated: 1) time of the year; 2) species of rootstock; 3) percentage of grafting success; 4) stem height at grafting point; 5) stem diameter at grafting point. Therefore, through statistical analysis we obtained significant differences in relation to the rootstock used, the months of the year in which the grafting was performed and the interaction between rootstock and the month in which the grafting was performed.

Produtividade, estabilidade e adaptabilidade em progênies de Myracrodruon urundeuva F.F. & M.F. Allemão-Anacardiaceae

The use and inadequate exploitation of natural resources is restricting the occurrence of aroeira (Myracrodruon urundeuva F.F. & M.F. Allemão), which now is on the FAO list of endangered species. This exploitation causes a decrease in the genetic base of M. urundeuva populations, which makes it difficult to find genotypes with stability and adaptability to different growing conditions. This study aimed at estimating the genetic variation and productivity, stability and adaptability of progenies of a M. urundeuva natural population, from the Ecological Station of Paulo de Faria-SP, under different planting systems. DBH (diameter at breast height) was evaluated in four progeny tests of M. urundeuva: i) planted with Anandenanthera falcata and Guazuma ulmifolia (TP-AMA); ii) single (TP-ASO); iii) planted with annual crops (TP-SAF) and iv) planted with Corymbia citriodora (TP-EUCA), installed in Selvíria-MS. The experimental design consisted of complete randomized blocks with three replications and a variable number of plants per plot in each of the four planting systems. From the joint analysis of the planting systems studied, it was found that: i) there were variations among planting systems particularly in TP-SAF; ii) only in TP-EUCA it was possible to detect variations among the progenies; iii) the effects of the genotype x environment interaction were not significant. Thereby, the harmonic mean of genotypic values (MHVG), the relative performance of genotypic values from the mean of each site (PRVG) and the harmonic mean of the relative performance of genotypic values (MHPRVG) for DBH showed, respectively: progenies with greater stability, adaptability, and stability and simultaneous adaptability within different planting systems. The use of these selection criteria provided a more refined selection of the best progenies of M. urundeuva under the different planting systems studied.

Avaliação das propriedades químicas em solo de cerrado SOB reflorestamento ciliar

The rapid growth of agriculture, promoted by public government initiatives, favored an out of control deforestation of our forests; today, reforestation of permanent preservation areas are necessary for the conservation of our natural resources, and recovery of such areas are required by public laws. In an area of 5.26 acres of riparian reforestation in the savanna soil chemical properties were evaluated after twenty years of planting. It was analyzed the following variables: (P, organic matter (MO), pH, K, Ca, Mg, H+Al, Al and S) in 13 modules, with three replicas in two depths (0 - 20 and 20 - 40 cm) in a randomized block design in hierarchical scheme. Reforestation with tree species on the edge of Parana river in Selvíria (MS) contributes to chemical soil attributes, under riparian reforestation, as similar as a soil without human disturbance in this region; it is also possible to verify that forestry plantation promotes deposition of organic material which is essential for nutrient cycling, which keep the chemical properties of such soil in good condition for the establishment of riparian vegetation.

A genetic algorithm for crop rotation

In the last few years, crop rotation has gained attention due to its economic, environmental and social importance which explains why it can be highly beneficial for farmers. This paper presents a mathematical model for the Crop Rotation Problem (CRP) that was adapted from literature for this highly complex combinatorial problem. The CRP is devised to find a vegetable planting program that takes into account green fertilization restrictions, the set-aside period, planting restrictions for neighboring lots and for crop sequencing, demand constraints, while, at the same time, maximizing the profitability of the planted area. The main aim of this study is to develop a genetic algorithm and test it in a real context. The genetic algorithm involves a constructive heuristic to build the initial population and the operators of crossover, mutation, migration and elitism. The computational experiment was performed for a medium dimension real planting area with 16 lots, considering 29 crops of 10 different botanical families and a two-year planting rotation. Results showed that the algorithm determined feasible solutions in a reasonable computational time, thus proving its efficacy for dealing with this practical application.

Influence of organic and mineral soil fertilization on essential oil of Spilanthes oleracea cv. Jambuarana

In the present study, the composition of essential oil of leaves and inflorescences of jambu (Spilanthes oleracea. Jambuarana), under organic manuring and mineral fertilization, was stuhed. Jambu plants show important chemical properties and their production has been addressed for the extraction of the essential oils for cosmetics industries, due to their pharmacolopcal properties. The experimental area of treatments contained urea as mineral fertilizer (120 g m2), applied twice and organic fertilizer (8 kg m2), applied at the planting. Jambu leaves and flowers were harvested twice: the first at 90 days after seedling transplantation and at the opening of the flower buds. Branches were cut at 7 cm from the soil, thus new branches can bud for the accomplishment of the second crop which happened 40 days after the re-budhng. The essential oil was analyzed by gas chromatography coupled with mass-spectrometry. According to our results the most representative compounds were trans-caryophyllene, germacrene-D, 1-dodecene, spathulenol and spilanthol (a compound presenting anesthetic properties) occurring in inflorescences. Fertilization procedure does not affect the content and the quality of the essential oil in Jambu plants. © 2012 Academic Journals Inc.

Florescimento da lavoura cafeeira sob diferentes manejos de irrigaçâo

The objective of this work was to evaluate the effect of different irrigation managements on flower induction and bloom of coffee trees. The study was carried out at the experimental area of the Engineering Department at Universidade Federal de Lavras, on Acaia Cerrado MG-1474 coffee cultivar, planted 3.0 meters between rows and 0.6 meters between plants and drip irrigated since planting in 1997. The experimental design was randomized blocks with 4 replicates and 5 irrigation treatment: A= non irrigated; B= irrigated throughout the whole year every time the water available was at most 25% of total available water (TAW); C= irrigated during the whole year every time the water available was at most 75% of TAW; D = treatment C during January, February, March, July, October, November and December and treatment B during April, May, June, August and September; E= treatment C during April, May, June, August and September. Each plot was composed of 10 plants and used 2 plants for the evaluation of secondary branches, number of flowers per flowering, number of fruit and fruit set between September and May during the growing seasons of 2006/2007 and 2007/2008. The different irrigation managements did not significantly influence the total number of flowers, number of branches and percentage of flowers that resulted in fruits. Comparing data from two harvests verified the biennial effect in the total number of flowers, percentage of fruit set and branch gain.

Productivity characteristics of endive as a function of spacing

Endive (Cichorium intybus) is one of the vegetables least studied in Brazil with respect to the behavior of the most commercialized cultivars, but it is known that the number of plants per area is one of the factors that most influences the productivity of various crops. Thus, the objective of this work was to evaluate the behavior of endive using four spacings between rows and five spacings between plants, in the region of Jaboticabal-SP. The experiment was conducted in the field in the period of August 12, 2008 to November 6, 2008, in the experimental area of the Sector of Vegetable Crops and Aromatic-Medicinal Plants, Department of Crop Sciences, School of Agricultural and Veterinary Sciences - UNESP-FCAV. The experimental design utilized was a randomized block design with a 4 × 5 factorial scheme, i.e., four spacings between rows (0.15, 0.20, 0.25 and 0.30 m) and five spacings between plants (0.10, 0.15, 0.20, 0.25 and 0.30 m), with three repetitions. The endive cultivar studied was 'Pão-de-Acucar', obtained from the company Tecnoseed. Seedlings were established utilizing the sowing system in 200-cell Styrofoam trays containing the substrate Plantmax Vegetables® HA. The seedlings were transplanted at 37 days after planting. After harvesting, the following characteristics were determined: height (cm), diameter of the plant in rows (cm), diameter of the plant in between rows (cm), number of leaves, fresh weight (g) and total estimated productivity (t/ha). There were no interactions between the factors studied. Based on the data, we conclude that spacings of 0.15 m between rows and of 0.15 m between plants produce plants of higher quality and with greater productivity.

Restoration of a degraded area using soil tillage systems in Campinas, São Paulo, Brazil

In Brazil the intensive agriculture use, mainly pasture, is the main cause of the presence of extensive areas of degraded lands. This study aimed to assess the impact of different soil management practices in a pasture degraded area used as garbage disposal. The experiment was performed at the Faculdade de Engenharia Agrícola, Universidade Estadual de Campinas - UNICAMP, in Campinas, state of São Paulo, Brazil, from 1990 to 1996. This area has undergone a process of recovery through removal of trash deposited on the surface, in 1985, levelling of soil, followed by application of limestone, subsoiling, planting of legumes (Crotalaria juncea) and crop rotation (soybean and maize). Since 1990 only popcorn maize was grown and established plots managed with different soil tillage systems, including harrow, chisel plow, moldboard plow, no tillage, disk plow and revolving hoe. One plot was planted exclusively with guinea grass (Panicum maximum) to serve as a reference for minimum loss of soil and another grown on a downhill direction to correspond to the expected maximum erosion. There were differences in sediment loss, nutrient loss and productivity of the popcorn maize in the period analyzed. The chisel plow and no tillage treatments caused the slightest loss of soil and nutrients, compared to other tillage systems. The results show that the soil management systems influenced the physical and chemical characteristics of soil, allowing an economical and environmental recovery of the area, providing the conditions for grain agricultural production.

Mume clonal rootstocks for 'Aurora-1' peach in São Paulo State, Brazil

In spite of significant results achieved with scion genetic improvement in stone fruits, the peach culture in Brazil still needs studies and new technologies regarding the use of rootstocks. A wide research project has being developed at the Faculdade de Ciências Agrárias e Veterinárias (FCAV/UNESP), Jaboticabal, Brazil, dealing with the use of mume clones (Prunus mume) as rootstocks for peach trees, which has produced promising results. In this research, two mume genotypes propagated by herbaceous cuttings were tested as rootstocks for peach cultivar Aurora-1. Three different tree spacing were used: 6 x 2 m, 6 x 3 m and 6 x 4 m. The experiment was carried out at Vista Alegre do Alto (21°10'14 S, 48°37'45 W, 700 m of altitude), São Paulo State, Brazil. Growing field conditions included Hapludalfs soil with medium sandy texture and using micro sprinkler irrigation. The region has an average chilling accumulation 17.9 hours per year. The evaluations were taken in 2005 and 2006 (2nd and 3rd year after planting, respectively). The trunk diameter was evaluated every three months, from the 24th to the 41st month after planting, totalizing seven evaluations. Plants on 'Rigitano' had higher trunk diameter on the 33rd, 39th and 41st month after planting (May/06, November/06 and February/07, respectively). No significant differences were observed in the other evaluations. The diameter at 5 cm above to the graft point was larger than below, but no incompatibility symptoms were observed between rootstocks and scion. Spacing tested did not influence trunk diameter, phenology and flower bud production in 'Aurora-1' scion. In conclusion, 'Rigitano' and 'Clone 15' are recommended for high density plantings of peach 'Aurora-1' in Brazil, and the 6 x 2 m spacing can be recommended, with productivity advantages for peach under low air relative humidity and mild winter conditions. © ISHS 2012.

Development of a support vector machine-based navigation system for driving a mobile robot through paths in plantations

The use of mobile robots turns out to be interesting in activities where the action of human specialist is difficult or dangerous. Mobile robots are often used for the exploration in areas of difficult access, such as rescue operations and space missions, to avoid human experts exposition to risky situations. Mobile robots are also used in agriculture for planting tasks as well as for keeping the application of pesticides within minimal amounts to mitigate environmental pollution. In this paper we present the development of a system to control the navigation of an autonomous mobile robot through tracks in plantations. Track images are used to control robot direction by preprocessing them to extract image features. Such features are then submitted to a support vector machine in order to find out the most appropriate route. The overall goal of the project to which this work is connected is to develop a real time robot control system to be embedded into a hardware platform. In this paper we report the software implementation of a support vector machine, which so far presented around 93% accuracy in predicting the appropriate route. © 2012 IEEE.

Recovery of degraded areas using topsoil in the Amazon rainforest

This study is aimed at evaluating the effect of placing the top soil cover areas, such as tailings degraded by tin mining, in the Amazon rainforest in Brazil. The evaluations of the planting sites occurred in areas where tin mining was carried out, basically planting native trees over a period of seven years. This work did not come from a pre-decreed methodology of experimental design, and data was collected only seven years after planting. Thus, it was not possible to identify all variables that contributed to a better recovery of the areas. Sampling was done about seven years after placing the top soil and is determined: pH, organic matter content, P, K, Ca, Mg, Al, cation exchange capacity (T), base saturation (V%), B, Fe, Zn, Cu and Mn. The native forest species existing at the site were evaluated in relation to height (in meters) and diameter of the base. For all sites where the surface layer of soil was applied, there were significant differences in the growth of native species. A fundamental aspect in the rehabilitation of areas degraded by mining, in general, is the knowledge about the soil where that recovery must be conducted. The specific procedures in the rehabilitation of those areas depend essentially on the physical, chemical, biological and mineralogical properties of the soil, which must present conditions for the adequate development of the plants. The initial idea of implanting a project of recovery of soils degraded by mining in the Amazon Forest emerged from a first visit to the field, carried out in 1998. The conditions of the already mined areas, in comparison to the exuberant forest of the surroundings caught our attention. The mining company that acts in the area had already been trying for some time to implant a plan of recovery of these mining areas, however without reaching any significant positive results. The loss of organic matter is one of the main problems of degraded areas in Brazil. The storage and reuse of a blanket of soil (topsoil) produce excellent results, but most of the miners consider this technique expensive and difficult because of operational costs and the sharp topographical condition of the mine site. Therefore, a research project was elaborated prioritizing the recovery of the soil degraded by the tin mining as a prior step to the recovery activities with native forest species. The formation of a superficial pseudo-horizon that supported the vegetation and the time that it would take for its establishment became the main objective of this research. The objective of this work is to verify the levels of elements and their traces in areas where top soils were applied for the remediation of degraded areas with local re-vegetation. © 2011 WIT Press.

Classification of crucifer cultivars based on the life-history of diamondback moth (Plutella xylostella)

We compared different cultivars and hybrids of crucifers in relation to development and life-history of diamondback moth (Plutella xylostella) to classify the plants according to their resistance to the pest. The plants used were Manteiga da Geórgia kale, Bola de Neve cauliflower, Ramoso Piracicaba Precoce broccoli, Chato-de-quintal cabbage, and the hybrid cabbages Midori, TPC668, TPC308, and TPC681. We evaluated performance daily until the pupal stage. Pupae were assessed individually to determine the pupal weight, performance, and pupal period. We determined the sex ratio, fecundity, fertility, and longevity of the emerged adults and calculated their reproductive potential. Cabbage hybrids TPC668, TPC308, and TPC681 do not support the development and reproduction of the diamondback moth. These hybrids show a level of resistance that is similar to that found the commercially available hybrid Midori and cultivar Chato de Quintal, which are known to be resistant to the diamondback moth. This finding implies that the capitata (cabbage) cultivars are the most suitable for planting because they are more resistant to pest than the cultivar's moth, acephala (kale). © 2013 Copyright Taylor and Francis Group, LLC.

Carbon dioxide emissions under different soil tillage systems in mechanically harvested sugarcane

Soil tillage and other methods of soil management may influence CO 2 emissions because they accelerate the mineralization of organic carbon in the soil. This study aimed to quantify the CO2 emissions under conventional tillage (CT), minimum tillage (MT) and reduced tillage (RT) during the renovation of sugarcane fields in southern Brazil. The experiment was performed on an Oxisol in the sugarcane-planting area with mechanical harvesting. An undisturbed or no-till (NT) plot was left as a control treatment. The CO2 emissions results indicated a significant interaction (p < 0.001) between tillage method and time after tillage. By quantifying the accumulated emissions over the 44 days after soil tillage, we observed that tillage-induced emissions were higher after the CT system than the RT and MT systems, reaching 350.09 g m-2 of CO2 in CT, and 51.7 and 5.5 g m-2 of CO2 in RT and MT respectively. The amount of C lost in the form of CO2 due to soil tillage practices was significant and comparable to the estimated value of potential annual C accumulation resulting from changes in the harvesting system in Brazil from burning of plant residues to the adoption of green cane harvesting. The CO 2 emissions in the CT system could respond to a loss of 80% of the potential soil C accumulated over one year as result of the adoption of mechanized sugarcane harvesting. Meanwhile, soil tillage during the renewal of the sugar plantation using RT and MT methods would result in low impact, with losses of 12% and 2% of the C that could potentially be accumulated during a one year period. © 2013 IOP Publishing Ltd.

Irrigation management in pruned coffee tree crop

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adubação de cobertura na batata-doce com doses combinadas de nitrogênio e potássio

Balanced fertilizations with N and K often increase the performance of crops, however, when there is absence of one of these nutrients in poor soils, can reduce crop response to fertilization with the other. The objective of this work was to evaluate the productivity of sweet-potato, the amount of sweetpotato without quality, and leaf nutrients analysis, of sweet-potato crop fertilized with N and K. The trial was conducted in farming for commercial production, in Presidente Prudente, São Paulo State, during February-June 2007, in a dystrophic Ultisol of medium texture. The experimental design was a randomized complete block design, with four replications, on factorial 4 x 4: levels of 0, 30, 60 and 120 kg N ha-1 (urea source) combined with levels of 0, 30, 60 and 120 kg K2O ha-1 (KCl source), applied to 39 days after planting of the crop. The sweet-potato is responsive to topdressing application with nitrogen and potassium, however, the greatest increases in productivity occur when doses of N and K are combined. Fertilization with N and K not increase the amount of sweet-potato without quality marketing. The highest increase in productivity of sweet-potato is reached with topdressing combined with 100 kg N ha-1 plus 120 kg K2O ha-1.