Uso de diferentes agentes ligantes no desenvolvimento de barra de cereal salgada adicionada de chia (Salvia hispânica L.)

The objective of this study was to evaluate different binders when preparing salt cereal bars and to characterize them as physical, physico-chemical and sensory parameters. Four formulations of different cereal bars using binders have been developed. The evaluated binders were collagen, guar gum, xanthan gum and psyllium. The developed cereal bars were evaluated according to their physical characteristics (color and texture), physicochemical (pH, moisture, ash, protein, lipids, Aw, crude fiber) beyond their calorie, fatty acid composition and concentration of the main minerals. Among the four binding agents evaluated, psyllium stood out due to its physicochemical characteristics. A cereal bar high in protein and fiber; low in carbohydrates and water activity. The binding agent guar gum and xanthan showed characteristics similar to psyllium, especially regarding to fiber content. Collagen as binder gave the final product a high level in protein and lipid. The color and texture analyzes showed that the salt cereal bars had the color and crispness characteristics for this type of product. Regarding to the composition in the fatty acid, the developed bars offer a good supply of essential fatty acids to the human body. The same was observed regarding to mineral contents. Sensory, salt cereal bars made with chia showed good acceptability, highlighting the elaborate bar with psyllium binder. Different binders demonstrated technological efficiency in the preparation of salt cereal bars. The binder psyllium agent over others showed better physical-chemical and sensory characteristics. However, in general the product has healthy and nutritional characteristics it may be indicated for a protein diet with high fiber content and free sugars.

Efeitos dos fatores ambientais na comunidade de macrófitas em pequenos cursos lóticos perenes subtropicais

Neste estudo foi investigado como a distribuição das espécies e a produção de biomassa de macrófitas aquáticas são influenciadas pelas condições físico-químicas do ambiente. Também foi avaliado como uma espécie com maior potencial competitivo pode interferir na diversidade de espécies da comunidade macrofítica. Para tanto, em cada um dos três arroios, foram dispostos seis transecções, perpendiculares à margem. Em cada transecção foram demarcadas três unidades amostrais de 1m², nas quais foram registrados os parâmetros fitossociológicos cobertura e frequência relativas e valor de importância. A diversidade de espécies foi estimada pelo índice de Shannon, utilizando os valores de cobertura de espécies. Para determinar a biomassa das macrófitas aquáticas foram usados quadrats de 0,25m², alocados dentro da unidade amostral de 1m² usadas para quantificar os dados fitossociológicos, nos mesmos pontos onde foi feito o levantamento de cobertura da vegetação. Utilizamos como variáveis preditoras a velocidade da corrente, radiação solar incidente, coeficiente de sombreamento, vegetação ripária arbórea adjacente, nitrogênio orgânico dissolvido, carbono orgânico dissolvido e condutividade elétrica. Foram registradas 32 espécies de macrófitas aquáticas, distribuídas em 19 famílias e 28 gêneros. Conforme Análise de Correspondência Canônica (CCA), as espécies com maiores valores de biomassa foram relacionadas a unidades amostrais com alta incidência luminosa. As unidades amostrais com dominância de Pistia stratiotes apresentaram menor diversidade de espécies indicando que esta espécie, quando encontra condições que permitam sua proliferação, pode excluir espécies de menor potencial competitivo. De acordo com GLM (Generalized Linear Model), a ausência de vegetação ripária ou presente em apenas uma das margens e baixas velocidades de corrente configura-se em condições favoráveis ao estabelecimento e desenvolvimento de macrófitas aquáticas, possibilitando produção maiores valores de biomassa.

Impact of dead and sunken water hyacinth on biotic communities, the aquatic environment and socioeconomic activities

The mobile water hyacinth, which was produced in growth zones, especially Murchison bay, was mainly exported to three sheltered storage bays (Thruston, Hannington and Waiya). Between 1996 and May 1998, the mobile form of water hyacinth occupied about 800 ha in Thruston bay, 750 ha in Hannington bay and 140 ha in Waiya bay). Biological control weevils and other factors, including localised nutrient depletion, weakened the weed that was confined to the bays and it sunk around October 1998. The settling to the bottom of such huge quantities of organic matter its subsequent decomposition and the debris from this mass was likely to have environmental impacts on biotic communities (e.g. fish and invertebrate), physico-chemical conditions (water quality), and on socio-economic activities (e.g. at fish landings, water abstraction, and hydro-power generation points). Sunken water hyacinth debris could also affect nutrient levels in the water column and lead to reduction in the content of dissolved oxygen. The changes in nutrient dynamics and oxygen levels could affect algal productivity, invertebrate composition and fish communities. Socio-economic impacts of dead sunken weed were expected from debris deposited along the shoreline especially at fish landings, water abstraction and hydropower generation points. Therefore, environmental impact assessment studies were carried out between 1998 and 2002 in selected representative zones of Lake Victoria to identify the effects of the sunken water hyacinth biomass.

Novel Anti-Campylobacter Compounds Identified Using High Throughput Screening of a Pre-selected Enriched Small Molecules Library

Campylobacter is a leading cause of foodborne bacterial gastroenteritis worldwide and infections can be fatal. The emergence of antibiotic-resistant Campylobacter spp. necessitates the development of new antimicrobials. We identified novel anti-Campylobacter small molecule inhibitors using a high throughput growth inhibition assay. To expedite screening, we made use of a “bioactive” library of 4,182 compounds that we have previously shown to be active against diverse microbes. Screening for growth inhibition of Campylobacter jejuni, identified 781 compounds that were either bactericidal or bacteriostatic at a concentration of 200 µM. Seventy nine of the bactericidal compounds were prioritized for secondary screening based on their physico-chemical properties. Based on the minimum inhibitory concentration against a diverse range of C. jejuni and a lack of effect on gut microbes, we selected 12 compounds. No resistance was observed to any of these 12 lead compounds when C. jejuni was cultured with lethal or sub-lethal concentrations suggesting that C. jejuni is less likely to develop resistance to these compounds. Top 12 compounds also possessed low cytotoxicity to human intestinal epithelial cells (Caco-2 cells) and no hemolytic activity against sheep red blood cells. Next, these 12 compounds were evaluated for ability to clear C. jejuni in vitro. A total of 10 compounds had an anti-C. jejuni effect in Caco-2 cells with some effective even at 25 µM concentrations. These novel 12 compounds belong to five established antimicrobial chemical classes; piperazines, aryl amines, piperidines, sulfonamide and pyridazinone. Exploitation of analogues of these chemical classes may provide Campylobacter specific drugs that can be applied in both human and animal medicine.

Greffage d’un film mince de nano-TiO2 sur les fibres naturelles cellulosiques pour le renforcement de biocomposites polymériques

Abstract : Natural materials have received a full attention in many applications because they are degradable and derived directly from earth. In addition to these benefits, natural materials can be obtained from renewable resources such as plants (i.e. cellulosic fibers like flax, hemp, jute, and etc). Being cheap and light in weight, the cellulosic natural fiber is a good candidate for reinforcing bio-based polymer composites. However, the hydrophilic nature -resulted from the presence of hydroxyl groups in the structure of these fibers- restricts the application of these fibers in the polymeric matrices. This is because of weak interfacial adhesion, and difficulties in mixing due to poor wettability of the fibers within the matrices. Many attempts have been done to modify surface properties of natural fibers including physical, chemical, and physico-chemical treatments but on the one hand, these treatments are unable to cure the intrinsic defects of the surface of the fibers and on the other hand they cannot improve moisture, and alkali resistance of the fibers. However, the creation of a thin film on the fibers would achieve the mentioned objectives. This study aims firstly to functionalize the flax fibers by using selective oxidation of hydroxyl groups existed in cellulose structure to pave the way for better adhesion of subsequent amphiphilic TiO[subscript 2] thin films created by Sol-Gel technique. This method is capable of creating a very thin layer of metallic oxide on a substrate. In the next step, the effect of oxidation on the interfacial adhesion between the TiO[subscript 2] film and the fiber and thus on the physical and mechanical properties of the fiber was characterized. Eventually, the TiO[subscript 2] grafted fibers with and without oxidation were used to reinforce poly lactic acid (PLA). Tensile, impact, and short beam shear tests were performed to characterize the mechanical properties while Thermogravimetric analysis (TGA), Differential Scanning Calorimetry (DSC), Dynamic mechanical analysis (DMA), and moisture absorption were used to show the physical properties of the composites. Results showed a significant increase in physical and mechanical properties of flax fibers when the fibers were oxidized prior to TiO[subscript 2] grafting. Moreover, the TiO[subscript 2] grafted oxidized fiber caused significant changes when they were used as reinforcements in PLA. A higher interfacial strength and less amount of water absorption were obtained in comparison with the reference samples.

Produção de lipidios funcionais por ação de lipase fúngica

A modificação estrutural de óleos e gorduras é uma das principais áreas de interesse de pesquisa em diferentes setores industriais. No caso da indústria de alimentos, a interesterificação é empregada para melhorar propriedades nutricionais e funcionais, em que se obtêm compostos diferentes dos que lhes deram origem. As lipases microbianas são os biocatalisadores mais utilizados industrialmente, por serem mais estáveis, específicas e com propriedades bem mais diversificadas que as lipases de outras fontes. Este trabalho objetivou, primeiramente, a caracterização da gordura da pele de frango (GPF) e sua comparação com óleo de soja, como referência, visando a utilização de GPF em reações de interesterificação. Para isto foram caracterizados quanto aos índices de rancidez hidrolítica e oxidativa, bem como de matéria insaponificável, índices de saponificação, refração e iodo. Foi realizado ainda o fracionamento e perfil de ácidos graxos destes lipídios e suas frações, com o cálculo de seus índices nutricionais. Foi verificado que a GPF apresentou qualidade satisfatória devido aos baixos índices de acidez (0,65 g ácido oleico.100 g -1 ), peróxido (2,14 meq.kg-1 ), p-anisidina (0,70 unidades de absorvância.g-1 ), além de fonte de ácidos graxos mono-insaturados (40%), sendo fonte promissora para estudos de interesterificação. Em um segundo momento o objetivo foi produzir lipídios modificados ricos em ácidos graxos essenciais a partir da gordura da pele de frango e ácidos graxos ramificados, utilizando lipase sn-1,3 específica e interesterificação do tipo acidólise. Foram estudados os fatores concentração de enzima, adição de água, proporção de substratos e tempo, segundo um planejamento experimental fatorial completo 2 4 . As separações analíticas foram executadas em placas de cromatografia de camada delgada, sendo as frações posteriormente extraídas, ressuspensas e injetadas no cromatógrafo a gás. Foi verificado que a adição de água ao meio reacional apresentou efeito significativo (p<0,05) para todos ácidos graxos avaliados dos triacilgliceróis, sendo que para o ácido essencial linoleico (C18:2) o efeito do tempo de reação também foi significativo, sendo verificado que quanto maior o tempo de reação, menor a quantidade de água a ser adicionada. Em um terceiro momento, o objetivo foi produzir éster fenólico a partir do DHCA, além de realizar reações de transesterificação deste éster com tricaprilina. Para a reação de transesterificação, foi utilizado um delineamento composto central rotacional (DCCR) variando a quantidade de enzima, tempo de reação e temperatura sobre a resposta (%) dos reagentes consumidos. A lipase Novozym® 435 de Candida antarctica foi utilizada como catalisador de todas reações. Foi verificado que a maior produção de éster (50%) ocorreu em oito dias. Nas reações de transesterificação, as relações molares em que houve maior consumo do éster produzido foram 1:5 e 1:10, sendo obtidos 21,1% e 29,6% de residual de dihidrocafeato de octila, respectivamente em 24 h. Foi observado que em altas temperaturas e tempo superior a 26 h, houve o menor residual de dihidrocafeato de octila (18,2%). Foram identificados três diferentes compostos fenólicos, contendo em sua estrutura dihidrocafeato de octila e ácido caprílico.

Titanium dioxide based nanomaterials for photocatalytic water treatment

Water treatment using photocatalysis has gained extensive attention in recent years. Photocatalysis is promising technology from green chemistry point of view. The most widely studied and used photocatalyst for decomposition of pollutants in water under ultraviolet irradiation is TiO2 because it is not toxic, relatively cheap and highly active in various reactions. Within this thesis unmodified and modified TiO2 materials (powders and thin films) were prepared. Physico-chemical properties of photocatalytic materials were characterized with UV-visible spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometry (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), ellipsometry, time-of-flight secondary ion mass spectrometry (ToF-SIMS), Raman spectroscopy, goniometry, diffuse reflectance measurements, thermogravimetric analysis (TGA) and nitrogen adsorption/desorption. Photocatalytic activity of prepared samples in aqueous environment was tested using model compounds such as phenol, formic acid and metazachlor. Also purification of real pulp and paper wastewater effluent was studied. Concentration of chosen pollutants was measured with high pressure liquid chromatography (HPLC). Mineralization and oxidation of organic contaminants were monitored with total organic carbon (TOC) and chemical oxygen demand (COD) analysis. Titanium dioxide powders prepared via sol-gel method and doped with dysprosium and praseodymium were photocatalytically active for decomposition of metazachlor. The highest degradation rate of metazachlor was observed when Pr-TiO2 treated at 450ºC (8h) was used. The photocatalytic LED-based treatment of wastewater effluent from plywood mill using commercially available TiO2 was demonstrated to be promising post-treatment method (72% of COD and 60% of TOC was decreased after 60 min of irradiation). The TiO2 coatings prepared by atomic layer deposition technique on aluminium foam were photocatalytically active for degradation of formic and phenol, however suppression of activity was observed. Photocatalytic activity of TiO2/SiO2 films doped with gold bipyramid-like nanoparticles was about two times higher than reference, which was not the case when gold nanospheres were used.

Ecologia alimentar e reprodutiva da piaba-do-rabo-amarelo, Astyanax cf. lacustris (Reinhardt, 1874) (Osteichthyes: Characidae) na Lagoa do Piató, Assu, Rio Grande do Norte, Brasil

The feeding habits and biological aspects of the reproductive cycle of two-spot astyanax, Astyanax cf. lacustris (Reinhardt, 1874) were investigated. Fish samples were captured on a monthly basis, using gillnets of 4 cm mesh size, from the Piató Lake, Assu, Rio Grande do Norte, during the period of September, 2006 to August, 2007. Physico-chemical parameters, such as, temperature, electrical conductivity and dissolved oxygen of the lake were registered. The monthly values of rainfall also were obtained. The 360 individuals captured, were measured, weighed, dissected, and stomach weight and the stage of gonadal maturity were registered. The stomach contents analyses were carried out based on volumetric method, points, frequency of occurrence and applying the Index of Relative Importance. The degrees of repletion of the stomachs were determined besides the Index of Repletion relating to feeding activity variations and frequency of ingestion with limnological parameters and rainfall. The food items identified were separated into distinct groups according to their origin. Sex ratio and Gonadosomatic Relation of females were verified to determine the spawning period and fecundity. The physico-chemical parameters presented the following annual mean values: temperature = 28.8ºC, electrical conductivity = 992.5 µS.cm-1; dissolved oxygen = 4.9 mg.L-1 during the study period. The annual mean of the rainfall was 63.5 mm. The results indicate that this species present an omnivorous feeding habit with a tendency towards insectivory, with an increase in feeding activity during the dry season. The aquatic oxygen to interfere very importance in the feeding activity than the others factors physico-chemicals of water and rainfall. There was a predominance of females, with a sex proportion of 1M:7F. The macroscopic characteristics of the ovaries and testicles revealed four stages of gonadal development: immature, maturing, mature and spent. A temporal variation was observed for the gonadal development of males and females. There was reproductive activity through out the year, with peaks in the months of February, April and June to correspond with the rain of precipitation of the region. The mean fecundity was 7.681 mature oocytes, varying from 4.476 to 12.036, with mean of 7.681. There was positive relation between fecundity and body mass. Condition Factor is not an efficient indicator of the reproductive period of this species. The species A. cf. lacustris is an opportunist and is well adapted to the conditions of the semi-arid Caatinga Biome

Amidos crioulos: caracterização fundamental e influência de biopolímeros nas propriedades funcionais do amido

O trabalho apresentado nesta tese focou-se no estudo do amido, nomeadamente na avaliação das características físico-químicas, morfológicas, térmicas e reológicas do amido de seis variedades de milho crioulo, preservadas no estado de Santa Catarina (Brasil), com o intuito de contribuir para a valorização e preservação de variedades locais que são cultivadas em sistemas de produção orgânica, também conhecidas como variedades crioulas. Estas sementes são importantes quer para a preservação da biodiversidade quer para os pequenos produtores que as conservam e as produzem fazendo uso de uma agricultura sustentável e independente comercialmente. Para além da caracterização dos amidos crioulos foram também analisadas as alterações que ocorrem nos processos de gelatinização e retrogradação do amido quando realizados na presença de outros biopolímeros, nomeadamente a quitosana e galactomananas. No Capítulo I é apresentada uma breve revisão do conhecimento científico sobre o amido e sobre a quitosana e galactomananas, os outros biopolímeros utilizados. Igualmente é feita uma sucinta abordagem sobre as principais técnicas analíticas que foram utilizadas: reologia fundamental, calorimetria diferencial de varrimento, microscopia eletrónica de varrimento e espectroscopia de infravermelho médio. No capítulo II apresenta-se o isolamento dos amidos das seis variedades de milho crioulo e a sua caracterização junto com um amido comercial usado como modelo de comparação. Os amidos apresentaram genericamente características físicoquímicas semelhantes e o amido extraído das variedades crioulas MT e MPA 01 apresentaram menor temperatura de gelatinização e maior percentagem de retrogradação, respetivamente. Os efeitos da adição da quitosana e de três galactomananas (goma guar, goma de alfarroba e goma cassia) em sistemas mistos com o amido são analisados nos Capítulos III e IV respetivamente. A adição dos biopolímeros aos amidos resultou no aumento das temperaturas de gelatinização, na alteração da retrogradação do amido pelas galactomananas e na alteração das propriedades viscoeláticas dos géis formados. Os dados de infravermelho esclareceram que nos sistemas com quitosana, o amido formou complexos com o ácido acético usado para dissolver a quitosana e que esta por sua vez formou acetato de quitosana. O comportamento durante a gelatinização do amido comercial quando comparado com o amido do milho crioulo MPA na sua interação com as galactomananas é diferenciado.

Valorización simbólica del Queso Crema de Chiapas, un queso mexicano tradicional con calidad de origen

El objetivo de este trabajo consistió en explorar el valor simbólico que posee un queso tradicional mexicano, el Queso Crema de Chiapas. Para ello, se recorrió un largo camino de caracterización técnica de los rasgos fisicoquímicos, microbiológicos y sensoriales del producto, así como también de sus canales de comercialización y su red de valor. Una vez que se conocieron y se identificaron los aspectos tecnológicos mensurables, que imparten las características especiales al Queso Crema de Chiapas. La presente investigación mostró la existencia de aspectos subjetivos que aportan un valor y significado a este queso genuino; aspectos determinados por la sociedad, y en especial por los productores. El simbolismo es un rasgo asignado por las personas; se trata de un concepto subjetivo que está determinado por la necesidade, y fundamentado por la historia, la cultura, la idiosincrasia y su forma de vida. Estos valores favorecen la presencia del queso en el mercado, lo que contribuye a su preservación como patrimonio alimentario. Esta investigación se realizó con un enfoque antropológico, cualitativo-cuantitativo y observacional en campo, que se complementó con investigaciones anteriores, demostrando el valor de este alimento identitario de Chiapas. Sus resultados pueden ser empleados como instrumento para promover acciones de valorización adecuadas y contribuir al desarrollo socioeconómico y cultural de su región de origen.

Application of GIS in potential beekeeping assessment: Case study of Montesinho Natural Park (Portugal)

Planners require solutions that address routine work needs and seems essential to improving efficiency and productivity. There are a great number of different factors related to beekeeper activity as well the quality and productivity of different bee products. The spatial analysis is a powerful tool for overlap and relates various levels of information on a map, and consequently a very useful for beekeeping activity planning. This work proposes and applies a methodology to potential beekeeping assessment in Montesinho Natural Park, a region in the northwest of Portugal. The beekeeping potential maps were developed with the following data sources: legal standards, vegetation, land use, topography, water resources, roads, electromagnetic fields, and some honey physico-chemical analysis. The design and implementation of spatial analysis model based on Geographic Information System (GIS) to beekeeping planning activities has already been described by Anjos et al (2014). Spatial analysis techniques allows to define the potential beekeeper map supporting the beekeeper management in this region. Anjos O, Silva G, Roque N, Fernandez P, 2014. GIS based analysis to support the beekeeping planning. Book of abstracts of the International Symposium on Bee Products 3rd edition – Annual meeting of the International Honey Commission (IHC), Faculty of medicine, University of Rijeka, p:61

Les conditions écologiques de la mer de Chine Méridionale

This paper deals with a job of synthesis of previous notes written by the most passionate researchers at the Nhatrang Institute of Oceanography. Its purpose is to provide biologists with an idea on the physical and physico-chemical aspect of the South China Sea.

Abundância das formas imaturas de Psaroniocompsa incrustata ( Lutz, 1910) (Diptera: Simuliidae) em um criadouro natural no rio Pium/RN, e sua fauna associada

The species psaroniocompsa incrustata (Lutz, 1910) was studied in relation to its abundance in different and seasonal periods, the physico-chemical of the breending ground and the fauna predation added to the immature of the species. The study was developed during eight months, from April to July, 2005 (rainy season) and from October, 2005 to January, 2006 (drought season), in one natural breending ground situated in the Pium river, that is part of the hydrographical basin of the Pirangi river in Rio Grande do Norte. The immature of Simuliidae were collected manually in vegetal substrate. At the same place, it was made one sampling of the associated fauna using Suber collectors and the measurement of the environment variants. It was also made one analysis of the stomach content of possible enemies of the simulídeos, to observe the predation of the associated fauna. It was collected 7.713 samples, all from de species P. Incrustata, it was observed a bigger abundance in the drought season, and the entomologic fauna associated totalizing 20.1314 species, distributed in the kinds: Diptera, Ephemeroptera, Odonata, Trichoptera, e Hemiptera, with a bigger representativity of Dipteros. The analysis of the stomach content of the species from the families Libellulidae and Hydropsychidae showed the presence of the simulídeos in only 4% of the material analysed, therefore it was not confirmed the presence of one efficient biological control of the simulídeos in this breending ground

A transcriptome approach towards understanding the development of ripening capacity in 'Bartlett' pears (Pyrus communis L.)

Background: The capacity of European pear fruit (Pyrus communis L.) to ripen after harvest develops during the final stages of growth on the tree. The objective of this study was to characterize changes in 'Bartlett' pear fruit physico-chemical properties and transcription profiles during fruit maturation leading to attainment of ripening capacity. Results: The softening response of pear fruit held for 14days at 20°C after harvest depended on their maturity. We identified four maturity stages: S1-failed to soften and S2- displayed partial softening (with or without ET-ethylene treatment); S3 - able to soften following ET; and S4 - able to soften without ET. Illumina sequencing and Trinity assembly generated 68,010 unigenes (mean length of 911bp), of which 32.8% were annotated to the RefSeq plant database. Higher numbers of differentially expressed transcripts were recorded in the S3-S4 and S1-S2 transitions (2805 and 2505 unigenes, respectively) than in the S2-S3 transition (2037 unigenes). High expression of genes putatively encoding pectin degradation enzymes in the S1-S2 transition suggests pectic oligomers may be involved as early signals triggering the transition to responsiveness to ethylene in pear fruit. Moreover, the co-expression of these genes with Exps (Expansins) suggests their collaboration in modifying cell wall polysaccharide networks that are required for fruit growth. K-means cluster analysis revealed that auxin signaling associated transcripts were enriched in cluster K6 that showed the highest gene expression at S3. AP2/EREBP (APETALA 2/ethylene response element binding protein) and bHLH (basic helix-loop-helix) transcripts were enriched in all three transition S1-S2, S2-S3, and S3-S4. Several members of Aux/IAA (Auxin/indole-3-acetic acid), ARF (Auxin response factors), and WRKY appeared to play an important role in orchestrating the S2-S3 transition. Conclusions: We identified maturity stages associated with the development of ripening capacity in 'Bartlett' pear, and described the transcription profile of fruit at these stages. Our findings suggest that auxin is essential in regulating the transition of pear fruit from being ethylene-unresponsive (S2) to ethylene-responsive (S3), resulting in fruit softening. The transcriptome will be helpful for future studies about specific developmental pathways regulating the transition to ripening. © 2015 Nham et al.

Estudo das propriedades físico-químicas e avaliação de compostos bioativos em 'Physalis peruviana L.'

O rápido crescimento da procura e na produção de Physalis está associado às suas características nutracêuticas e medicinais, por estarem associadas ao bemestar e à saúde. O reconhecimento e o conceito da qualidade dos frutos é cada vezmais importante, abrangendo a aparência do produto, o aroma, a textura e o valor nutricional. Com a realização deste trabalho pretendeu-se avaliar as propriedades físicoquímicas das bagas de physalis, bem como os conteúdos em compostos bioativos com potenciais benefícios para a saúde humana. Neste trabalho foi avaliada uma variedade de physalis (Physalis peruviana L.), sendo os frutos provenientes de uma exploração localizada na região Norte-Centro de Portugal. Foram realizadas análises físicas às 'physalis' frescas, tendo sido determinados o calibre, a cor e a textura. Na análise química, realizaram-se as determinações, da humidade, da fibra bruta, dos açúcares totais e redutores, da acidez total titulável, do teor de sólidos solúveis totais, do ácido ascórbico, dos carotenóides, dos compostos fenólicos totais, dos orto-difenóis e dos flavonóides. Foi ainda determinada a atividade antioxidante pelos métodos ABTS e DPPH e os extratos submetidos a condições simulantes do trato digestivo. As physalis em estudo apresentaram, em média um diâmetro de 1,69 cm e uma massa de 2,77 g. Relativamente à cor, as bagas apresentaram-se claras, (L*=65,72), e com uma tendência para a cor vermelha (a*=16,69), e uma forte intensidade amarela (b*=58,11). No que diz respeito à textura, a firmeza foi de 2,40 N e a elasticidade foi de 2,94 mm. Quanto à caracterização química foram encontrados os seguintes resultados: 83,02% de água, 4,61% de fibra, 8,79% de açúcares totais, 1,25% de acidez total, expressa em ácido cítrico. A amostra continha ainda 5,95 μg/g de carotenoides 26,7 mg de ácido ascórbico por 100 g. Os valores de fenóis totais (42,74 e 59,95 mg EAG/100 g) e de atividade antioxidante determinada pelo método DPPH (7,73 e 9,61 μmol TE/g), e pelo método ABTS (12,28 e 13,71 μmol TE/g) variam de acordo com as condições de extração. Verificou-se ainda uma correlação forte entre os dois métodos. No que diz respeito às condições in vitro de simulação das condições do trato digestivo, verificou-se um decréscimo ao longo do trato digestivo tanto no teor em compostos fenólicos bem como na atividade antioxidante. Em termos globais houve uma retenção de 43% dos compostos fenólicos totais e 26% da atividade antioxidante.