Charqui meats as fermented meat products: role of bacteria for some sensorial properties development

Jerked beef, a derivative of charqui meat, is a cured, salted and dried meat product. The presence of halotolerant bacteria, where Staphylococcus spp. (84.2%) were the predominant species, would act eventually as starter cultures and was followed throughout processing. Jerked beef prepared separately with exogenous S. carnosus and S. xylosus as starter cultures resulted in high proteolysis. Samples prepared with S. xylosus had the highest proteolysis and were preferred by the sensory panel. This research has suggested that jerked beef (and thus charqui meat) prepared under these conditions is a fermented meat product. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Phosphate functionalization of spongiolite surface

Spongiolite from Mato Grosso do Sul (Brazil), natural inorganic composite constituted of silica needles, was treated with concentrated phosphoric acid at high temperatures. Superficial coating of the needles was proved to be constituted of silicon diphosphate, a compound offering six-coordinated silicon sites. Owing to the affinity of three charged ions to phosphate groups, this coating acts as specific adsorbent for the rare earth elements which prefer octahedral coordination (starting from samarium, yttrium included). The uptake of lanthanum and neodymium are significantly lower due to different coordination tendencies. Lanthanide fixation upon silica with PO4 groups anchored on its surface may be useful in the manufacturing of special phosphate-silicate glasses. (C) 2003 Elsevier B.V. All rights reserved.

Glyceraldehyde-3-phosphate dehydrogenase of Paracoccidioides brasiliensis is a cell surface protein involved in fungal adhesion to extracellular matrix proteins and interaction with cells

The pathogenic fungus Paracoccidioides brasiliensis causes paracoccidioidomycosis, a pulmonary mycosis acquired by inhalation of fungal airborne propagules, which may disseminate to several organs and tissues, leading to a severe form of the disease. Adhesion to and invasion of host cells are essential steps involved in the infection and dissemination of pathogens. Furthermore, pathogens use their surface molecules to bind to host extracellular matrix components to establish infection. Here, we report the characterization of the glyceraldehyde-3-phosphate dehydrogenase (GAPDH) of P. brasiliensis as an adhesin, which can be related to fungus adhesion and invasion. The P. brasiliensis GAPDH was overexpressed in Escherichia coli, and polyclonal antibody against this protein was obtained. By immunoelectron microscopy and Western blot analysis, GAPDH was detected in the cytoplasm and the cell wall of the yeast phase of P. brasiliensis. The recombinant GAPDH was found to bind to fibronectin, laminin, and type I collagen in ligand far-Western blot assays. of special note, the treatment of P. brasiliensis yeast cells with anti-GAPDH polyclonal antibody and the incubation of pneumocytes with the recombinant protein promoted inhibition of adherence and internalization of P. brasiliensis to those in vitro-cultured cells. These observations indicate that the cell wall-associated form of the GAPDH in P. brasiliensis could be involved in mediating binding of fungal cells to fibronectin, type I collagen, and laminin, thus contributing to the adhesion of the microorganism to host tissues and to the dissemination of infection.

Identification of bacteria in endodontic infections by sequence analysis of 16S rDNA clone libraries

A significant proportion of oral bacteria are unable to undergo cultivation by existing techniques. In this regard, the microbiota from root canals still requires complementary characterization. The present study aimed at the identification of bacteria by sequence analysis of 16S rDNA clone libraries from seven endodontically infected teeth. Samples were collected from the root canals, subjected to the PCR with universal 16S rDNA primers, cloned and partially sequenced. Clones were clustered into groups of closely related sequences (phylotypes) and identification to the species level was performed by comparative analysis with the GenBank, EMBL and DDBJ databases, according to a 98 % minimum identity. All samples were positive for bacteria and the number of phylotypes detected per subject varied from two to 14. The majority of taxa (65(.)2 %) belonged to the phylum Firmicutes of the Gram-positive bacteria, followed by Proteobacteria (10(.)9 %), Spirochaetes (4(.)3 %), Bacteroidetes (6(.)5 %), Actinobacteria (2(.)2 %) and Deferribacteres (2(.)2 %). A total of 46 distinct taxonomic units was identified. Four clones with low similarity to sequences previously deposited in the databases were sequenced to nearly full extent and were classified taxonomically as novel representatives of the order Clostridiales, including a putative novel species of Mogibacterium. The identification of novel phylotypes associated with endodontic infections suggests that the endodontium may still harbour a relevant proportion of uncharacterized taxa.

Thermal characterization of bacterial cellulose-phosphate composite membranes

Cellulose-phosphate composite membranes have been prepared from bacterial cellulose membranes ( BC) and sodium polyphosphate solution. The structure and thermal behavior of the new composites were evaluated by X-ray diffraction (XRD), P-31-nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetry (TG) and thermomechanical analysis (TMA). From XRD analyses the I alpha and I beta cellulose crystalline phases were identified together with crystalline sodium phosphate that covers the cellulose microfibrils as revealed by SEM. P-31 NMR spectra show peaks assigned to Q(0) and Q(1) phosphate structures to be compared to the Q(2) units that characterize the precursor polyphosphate. Glass transition temperature, T-g, obtained from TMA curves and thermal stability obtained from TG and DSC measurements, were observed to be dependent on the phosphate content.

Structural features of phosphate and sulfate modified zirconia prepared by sol-gel route

This paper describes the effect of sulfate, phosphate and nitrate complexing ligands on the structural features of amorphous xerogels and on the crystallization of metastable zirconia phases during the xerogel-ceramic conversion. Powdered samples were prepared by a sol-gel route using zirconyl chloride precursors chemically modified by complexing ligands. The structural evolution of ZrO2 phases as function of firing temperature was analyzed by XRPD, EXAFS and P-13 NMR/MAS. The experimental results show the formation of metastable t-ZrO2 during the low firing temperature of xerogels modified by sulfate or phosphate groups. The martensitic tetragonal-monoclinic transformation occurs during desorption of sulfate groups. The largest temperature interval of stability of metastable tetragonal zirconia was observed for phosphate-modified xerogels.

The effect of mold temperature on castability of CPTi and Ti-6Al-4V castings into phosphate bonded investment materials

Objective. The aim of this study was to evaluate the castability of CP titanium and Ti-6Al-4V alloy castings into Rematitan Plus investment at three different mold temperatures.Methods. A nylon mesh pattern (20 mm with 64 squares and wire of 0.7 mm in diameter) was used for the castability testing. Initially, an image of the wax pattern was obtained by means of a digital camera and the total extension of filaments (mm) was then measured, using the Leica Qwin image analysis system. The mesh sprued was placed in the Rematitan Plus investment material and the castings were made in a Discovery Plasma machine at three different mold temperatures: 430 degrees C (control group), 480 degrees C or 530'C. Ten castings were made for each temperature. The images of the castings were analyzed (Leica Qwin) and the castability index determined by the number of the completely cast segments as a percentage of the wax pattern. Data were analyzed by two-way ANOVA and Tukey's multiple comparison test (a = 0.05) using materials and temperatures as discriminating variables.Results. The Ti-6Al-4V alloy (60.86%) presented a better castability index than CP Ti (48.44%) (p < 0.000001). For CP Ti, the temperature of 530 degrees C (23.96%) presented better castability than at other temperatures, 480 degrees C (14.66%) and 430 degrees C (12.54%), with no difference between them (p < 0.001). For Ti-6Al-4V alloy, there was a statistically significant difference among the three temperatures: 530 degrees C (28.36%) > 480 degrees C (19.66%) > 430 degrees C (15.97%) (p < 0.002).Significance. Within the limitations of this study, the increase in the mold temperature of the Rematitan Plus investment resulted in a better castability index for both materials, and Ti-6Al-4V presented a better castability index than CP Ti. (c) 2005 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Evaluation of the thermal shrinkage of titanium and the setting and thermal expansion of phosphate-boded investments

Statement of problem. There are few studies on titanium casting shrinkage, and phosphate-bonded investments for titanium casting have not produced appropriate marginal fit.Purpose. The purpose of this study was to determine the thermal shrinkage of titanium and the setting and thermal expansion of 3 phosphate-bonded investments.Material and methods. The thermal shrinkage between the melting temperature and room temperature was calculated using a titanium thermal expansion coefficient. The thermal and setting expansion were measured for 3 phosphate bonded investments: Rematitan Plus (RP) specific for titanium, Rema Exakt (RE), and Castorit Super C (CA), using different special liquid concentrations (100%, 75%, and 50%). Setting expansion was measured for cylindrical specimens 50 mm long x 8 mm in diameter with a transducer. The heating and cooling curves were obtained with a dilatometer (DIL 402 PC). The total expansion curve was drawn using software, and temperatures to obtain expansion equivalent to titanium casting shrinkage were determined (n=5). In addition, the total expansion of the control group (RP at 430 degrees C) was measured, as well as the temperatures at which the other groups achieved equivalent total expansion (n=5). Data were analyzed by 1-way ANOVA and the Tukey HSD test (alpha=.05).Results. Titanium casting shrinkage was estimated as 1.55%. RP did not achieve this expansion. RE achieved expansion of 1.55% only with a special liquid concentration of 100% at 594 degrees C. CA with all special liquid concentrations attained this expansion (351 degrees C to 572 degrees C). Total expansion of the control group was 0.86%, and the other groups reached that expansion within the range of 70 degrees C to 360 degrees C.Conclusions. Only RE and CA demonstrated sufficient expansion to compensate for titanium casting shrinkage. All groups reached total expansion equivalent to that of the control group at significantly lower temperatures.

Lability of heavy metal species in aquatic humic substances characterized by ion exchange with cellulose phosphate

Labile metal species in aquatic humic substances (HSs) were characterized by ion exchange on cellulose phosphate (CellPhos) by applying an optimized batch procedure. The HSs investigated were pre-extracted from humic-rich waters by ultrafiltration and a resin XAD 8 procedure. The HS-metal species studied were formed by complexation with Cd(II), Ni(II), Cu(II), Mn(II) and Pb(II) as a function of time and the ratio ions to HSs. The kinetics and reaction order of this exchange process were studied. At the beginning (<3 min), the labile metal fractions are separated relatively quickly. After 3 min, the separation of the metal ions proceeds with uniform half-lives of about 12-14 min, revealing rather slow first-order kinetics. The metal exchange between HSs and CellPhos exhibited the following order of metal lability with the studied HSs: Cu > Pb > Mn > Ni > Cd. The required metal determinations were carried out by atomic absorption spectrometry.

PATHOGENIC OR POTENTIALLY PATHOGENIC BACTERIA AS CONTAMINANTS OF FRESH-WATER FROM DIFFERENT SOURCES IN ARARAQUARA, BRAZIL

The microbiological quality of various fresh waters in the Araraquara region, state of São Paulo, Brazil was investigated. Ninety-nine water samples were taken from rivers, reservoirs, artesian and non-artesian wells, springs and tap waters, and these waters were analysed using: plate counts of heterotrophic microorganisms (per 1 ml); Most Probable Number (MPN) of fecal coliforms and E. coli (per 100 ml); tests for presence of Salmonella, Shigella, Yersinia, the E. coli pathogens of classes EPEC, ETEC and EIEC and Mycobacterium, Shigella, Yersinia and enteroinvasive E. coli (EIEC) were not isolated. The other types of microorganisms were isolated in varying proportions. We conclude that the waters investigated represent a potential microbiological health risk.

STUDY OF AMNONIFYING BACTERIA BEHAVIOR IN THE LAKES CARIOCA AND D-HELVECIO (RIO-DOCE-VALLEY-MG)

The study of the amnonifying bacteria behavior in the lakes Carioca and D. Helvecio, which belong to the natural lacustrine system of the Rio Doce Valley - Minas Gerais - Brazil, during the period from March to November, showed a similar seasonal variation in both lakes, with higher population density in March and November (raining period) and lower density in May, July and September (dry period). The vertical variation was also relatively similar for both lakes, were during the thermal stratification the distribution was regular along the water column, while during the period of thermal stratification the populational density was remarkably different at different depths. The characterized ammonifying types to the genera Acinetobacter, Moraxella and Proteus, which in culture reveal high amnonifying activity with values which have reached 30,8 mug/l of ammonia per population unity (105 bacteria/ml).