Comparison of electricity generation costs

The economical competitiveness of various power plant alternatives is compared. The comparison comprises merely electricity producing power plants. Combined heat and power (CHP) producing power will cover part of the future power deficit in Finland, but also condensing power plants for base load production will be needed. The following types of power plants are studied: nuclear power plant, combined cycle gas turbine plant, coal-fired condensing power plant, peat-fired condensing power plant, wood-fired condensing power plant and wind power plant. The calculations are carried out by using the annuity method with a real interest rate of 5 % per annum and with a fixed price level as of January 2008. With the annual peak load utilization time of 8000 hours (corresponding to a load factor of 91,3 %) the production costs would be for nuclear electricity 35,0 €/MWh, for gas based electricity 59,2 €/MWh and for coal based electricity 64,4 €/MWh, when using a price of 23 €/tonCO2 for the carbon dioxide emission trading. Without emission trading the production cost of gas electricity is 51,2 €/MWh and that of coal electricity 45,7 €/MWh and nuclear remains the same (35,0 €/MWh) In order to study the impact of changes in the input data, a sensitivity analysis has been carried out. It reveals that the advantage of the nuclear power is quite clear. E.g. the nuclear electricity is rather insensitive to the changes of nuclear fuel price, whereas for natural gas alternative the rising trend of gas price causes the greatest risk. Furthermore, increase of emission trading price improves the competitiveness of the nuclear alternative. The competitiveness and payback of the nuclear power investment is studied also as such by using various electricity market prices for determining the revenues generated by the investment. The profitability of the investment is excellent, if the market price of electricity is 50 €/MWh or more.

Innovation – from individual intuition to collaborative innovation. The role of individual key actor in facilitation of innovation in large organization context

The objective of this research was to study the role of key individuals in facilitation of technology enabled bottom-up innovation in large organization context. The development of innovation was followed from the point of view of individual actor (key individual) in two cases, through three levels: individual, team and organization, by using knowledge creation and innovation models. This study provides theoretical synthesis and framework through which the study is driven. The results of the study indicate, that in bottom-up initiated innovations the role of key individuals is still crucial, but innovation today is collective effort and there acts several entrepreneurial key individuals: innovator, user champion and organizational sponsor, whose collaboration and developing interaction drives innovation further. The team work is functional and fluent, but it meets great problems in interaction with organization. The large organizations should develop its practices and ability to react on emerging bottom-up initiations, in order to embed innovation to organization and gain sustainable innovation. In addition, bottom-up initiated innovations are demonstrations of peoples knowing, tacit knowledge and therefore renewing of an organization.

Developing of the Variable Speed Drive -control in simulated parallel pumping systems

This thesis presents briefly the basic operation and use of centrifugal pumps and parallel pumping applications. The characteristics of parallel pumping applications are compared to circuitry, in order to search analogy between these technical fields. The purpose of studying circuitry is to find out if common software tools for solving circuit performance could be used to observe parallel pumping applications. The empirical part of the thesis introduces a simulation environment for parallel pumping systems, which is based on circuit components of Matlab Simulink —software. The created simulation environment ensures the observation of variable speed controlled parallel pumping systems in case of different controlling methods. The introduced simulation environment was evaluated by building a simulation model for actual parallel pumping system at Lappeenranta University of Technology. The simulated performance of the parallel pumps was compared to measured values of the actual system. The gathered information shows, that if the initial data of the system and pump perfonnance is adequate, the circuitry based simulation environment can be exploited to observe parallel pumping systems. The introduced simulation environment can represent the actual operation of parallel pumps in reasonably accuracy. There by the circuitry based simulation can be used as a researching tool to develop new controlling ways for parallel pumps.

Flexible Multibody Simulation Approach in the Dynamic Analysis of Bone Strains Activity

The objective of this study is to show that bone strains due to dynamic mechanical loading during physical activity can be analysed using the flexible multibody simulation approach. Strains within the bone tissue play a major role in bone (re)modeling. Based on previous studies, it has been shown that dynamic loading seems to be more important for bone (re)modeling than static loading. The finite element method has been used previously to assess bone strains. However, the finite element method may be limited to static analysis of bone strains due to the expensive computation required for dynamic analysis, especially for a biomechanical system consisting of several bodies. Further, in vivo implementation of strain gauges on the surfaces of bone has been used previously in order to quantify the mechanical loading environment of the skeleton. However, in vivo strain measurement requires invasive methodology, which is challenging and limited to certain regions of superficial bones only, such as the anterior surface of the tibia. In this study, an alternative numerical approach to analyzing in vivo strains, based on the flexible multibody simulation approach, is proposed. In order to investigate the reliability of the proposed approach, three 3-dimensional musculoskeletal models where the right tibia is assumed to be flexible, are used as demonstration examples. The models are employed in a forward dynamics simulation in order to predict the tibial strains during walking on a level exercise. The flexible tibial model is developed using the actual geometry of the subject’s tibia, which is obtained from 3 dimensional reconstruction of Magnetic Resonance Images. Inverse dynamics simulation based on motion capture data obtained from walking at a constant velocity is used to calculate the desired contraction trajectory for each muscle. In the forward dynamics simulation, a proportional derivative servo controller is used to calculate each muscle force required to reproduce the motion, based on the desired muscle contraction trajectory obtained from the inverse dynamics simulation. Experimental measurements are used to verify the models and check the accuracy of the models in replicating the realistic mechanical loading environment measured from the walking test. The predicted strain results by the models show consistency with literature-based in vivo strain measurements. In conclusion, the non-invasive flexible multibody simulation approach may be used as a surrogate for experimental bone strain measurement, and thus be of use in detailed strain estimation of bones in different applications. Consequently, the information obtained from the present approach might be useful in clinical applications, including optimizing implant design and devising exercises to prevent bone fragility, accelerate fracture healing and reduce osteoporotic bone loss.

Practices of place-making through locative media artworks

Peer-reviewed

Russian Enterprise Restructuring - the Effect of Privatisation and Market Liberalisation on the Performance of Large Enterprises

The fundamental question in the transitional economies of the former Eastern Europe and Soviet Union has been whether privatisation and market liberalisation have had an effect on the performance of former state-owned enterprises. This study examines the effect of privatisation, capital market discipline, price liberalisation and international price exposure on the restructuring of large Russian enterprises. The performance indicators are sales, profitability, labour productivity and stock market valuations. The results do not show performance differences between state-owned and privatised enterprises. On the other hand, the expansion of the de novo private sector has been strong. New enterprises have significantly higher sales growth, profitability and labour productivity. However, the results indicate a diminishing effect of ownership. The international stock market listing has a significant positive effect on profitability, while the effect of domestic stock market listing is insignificant. The international price exposure has a significant positive increasing effect on profitability and labour productivity. International enterprises have higher profitability only when operating on price liberalised markets, however. The main results of the study are strong evidence on the positive effects of international linkages on the enterprise restructuring and the higher than expected role of new enterprises in the Russian economy.

IEA Bioenergy Task 40 “Sustainable International Bioenergy Trade: Securing supply and demand” Country report of Finland 2008

This study considered the current situation of biofuels markets in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 21% of the total energy consumption in 2006. Almost 80% of the wood-based energy is recovered from industrial by-products and residues. Finland has commitment itself to maintaining its greenhouse gas emissions at the 1990 level, at the highest, during the period 2008–2012. The energy and climate policy carried out in recent years has been based on the National Energy and Climate introduced in 2005. The Finnish energy policy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In 2007, the government started to prepare a new long-term (up to the year 2050) climate and energy strategy that will meet EU’s new targets for the reduction of green house gas emissions and the promotion of renewable energy sources. The new strategy will be introduced during 2008. The international biofuels trade has a substantial importance for the utilisation of bioenergy in Finland. In 2006, the total international trading of solid and liquid biofuels was approximately 64 PJ of which import was 61 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2006, as much as 24% of wood energy was based on foreignorigin wood. Wood pellets and tall oil form the majority of export streams of biofuels. The indirect import of wood fuels increased almost 10% in 2004–2006, while the direct trade of solid and liquid biofuels has been almost constant.

The use of future-oriented knowledge in regional innovation processes: Research on knowledge generation, transfer and conversion

The importance of the regional level in research has risen in the last few decades and a vast literature in the fields of, for instance, evolutionary and institutional economics, network theories, innovations and learning systems, as well as sociology, has focused on regional level questions. Recently the policy makers and regional actors have also began to pay increasing attention to the knowledge economy and its needs, in general, and the connectivity and support structures of regional clusters in particular. Nowadays knowledge is generally considered as the most important source of competitive advantage, but even the most specialised forms of knowledge are becoming a short-lived resource for example due to the accelerating pace of technological change. This emphasizes the need of foresight activities in national, regional and organizational levels and the integration of foresight and innovation activities. In regional setting this development sets great challenges especially in those regions having no university and thus usually very limited resources for research activities. Also the research problem of this dissertation is related to the need to better incorporate the information produced by foresight process to facilitate and to be used in regional practice-based innovation processes. This dissertation is a constructive case study the case being Lahti region and a network facilitating innovation policy adopted in that region. Dissertation consists of a summary and five articles and during the research process a construct or a conceptual model for solving this real life problem has been developed. It is also being implemented as part of the network facilitating innovation policy in the Lahti region.

The effects of ICT on school: teachers’ and students’ perspectives

The purpose of this study was to investigate the effects of information and communication technology (ICT) on school from teachers’ and students’ perspectives. The focus was on three main subject matters: on ICT use and competence, on teacher and school community, and on learning environment and teaching practices. The study is closely connected to the national educational policy which has aimed strongly at supporting the implementation of ICT in pedagogical practices at all institutional levels. The phenomena were investigated using a mixed methods approach. The qualitative data from three cases studies and the quantitative data from three statistical studies were combined. In this study, mixed methods were used to investigate the complex phenomena from various stakeholders’ points of view, and to support validation by combining different perspectives in order to give a fuller and more complete picture of the phenomena. The data were used in a complementary manner. The results indicate that the technical resources for using ICT both at school and at homes are very good. In general, students are capable and motivated users of new technology; these skills and attitudes are mainly based on home resources and leisuretime use. Students have the skills to use new kinds of applications and new forms of technology, and their ICT skills are wide, although not necessarily adequate; the working habits might be ineffective and even wrong. Some students have a special kind of ICT-related adaptive expertise which develops in a beneficial interaction between school guidance and challenges, and individual interest and activity. Teachers’ skills are more heterogeneous. The large majority of teachers have sufficient skills for everyday and routine working practices, but many of them still have difficulties in finding a meaningful pedagogical use for technology. The intensive case study indicated that for the majority of teachers the intensive ICT projects offer a possibility for learning new skills and competences intertwined in the work, often also supported by external experts and a collaborative teacher community; a possibility that “ordinary” teachers usually do not have. Further, teachers’ good ICT competence help them to adopt new pedagogical practices and integrate ICT in a meaningful way. The genders differ in their use of and skills in ICT: males show better skills especially in purely technical issues also in schools and classrooms, whereas female students and younger female teachers use ICT in their ordinary practices quite naturally. With time, the technology has become less technical and its communication and creation affordances have become stronger, easier to use, more popular and motivating, all of which has increased female interest in the technology. There is a generation gap in ICT use and competence between teachers and students. This is apparent especially in the ICT-related pedagogical practices in the majority of schools. The new digital affordances not only replace some previous practices; the new functionalities change many of our existing conceptions, values, attitudes and practices. The very different conceptions that generations have about technology leads, in the worst case, to a digital gap in education; the technology used in school is boring and ineffective compared to the ICT use outside school, and it does not provide the competence needed for using advanced technology in learning. The results indicate that in schools which have special ICT projects (“ICT pilot schools”) for improving pedagogy, these have led to true changes in teaching practices. Many teachers adopted student-centred and collaborative, inquiry-oriented teaching practices as well as practices that supported students' authentic activities, independent work, knowledge building, and students' responsibility. This is, indeed, strongly dependent on the ICT-related pedagogical competence of the teacher. However, the daily practices of some teachers still reflected a rather traditional teacher-centred approach. As a matter of fact, very few teachers ever represented solely, e.g. the knowledge building approach; teachers used various approaches or mixed them, based on the situation, teaching and learning goals, and on their pedagogical and technical competence. In general, changes towards pedagogical improvements even in wellorganised developmental projects are slow. As a result, there are two kinds of ICT stories: successful “ICT pilot schools” with pedagogical innovations related to ICT and with school community level agreement about the visions and aims, and “ordinary schools”, which have no particular interest in or external support for using ICT for improvement, and in which ICT is used in a more routine way, and as a tool for individual teachers, not for the school community.

Power line communication in motor cables of variable-speed electric drives − analysis and

Data transmission between an electric motor and a frequency converter is required in variablespeed electric drives because of sensors installed at the motor. Sensor information can be used for various useful applications to improve the system reliability and its properties. Traditionally, the communication medium is implemented by an additional cabling. However, the costs of the traditional method may be an obstacle to the wider application of data transmission between a motor and a frequency converter. In any case, a power cable is always installed between a motor and a frequency converter for power supply, and hence it may be applied as a communication medium for sensor level data. This thesis considers power line communication (PLC) in inverter-fed motor power cables. The motor cable is studied as a communication channel in the frequency band of 100 kHz−30 MHz. The communication channel and noise characteristics are described. All the individual components included in a variable-speed electric drive are presented in detail. A channel model is developed, and it is verified by measurements. A theoretical channel information capacity analysis is carried out to estimate the opportunities of a communication medium. Suitable communication and forward error correction (FEC) methods are suggested. A general method to implement a broadband and Ethernet-based communication medium between a motor and a frequency converter is proposed. A coupling interface is also developed that allows to install the communication device safely to a three-phase inverter-fed motor power cable. Practical tests are carried out, and the results are analyzed. Possible applications for the proposed method are presented. A speed feedback motor control application is verified in detail by simulations and laboratory tests because of restrictions for the delay in the feedback loop caused by PLC. Other possible applications are discussed at a more general level.