Prediction of the thermal performance of horizontal-coupled ground source heat exchangers

The thermal performance of a horizontal-coupled ground-source heat pump system has been assessed both experimentally and numerically in a UK climate. A numerical simulation of thermal behaviour of the horizontal-coupled heat exchanger for combinations of different ambient air temperatures, wind speeds, refrigerant temperature and soil thermal properties was studied using a validated 2D transient model. The specific heat extraction by the heat exchanger increased with ambient temperature and soil thermal conductivity, however it decreased with increasing refrigerant temperature. The effect of wind speed was negligible.

Performance assessment of a volcanic ash transport model mini-ensemble used for inverse modeling of the 2010 Eyjafjallajökull eruption

The requirement to forecast volcanic ash concentrations was amplified as a response to the 2010 Eyjafjallajökull eruption when ash safety limits for aviation were introduced in the European area. The ability to provide accurate quantitative forecasts relies to a large extent on the source term which is the emissions of ash as a function of time and height. This study presents source term estimations of the ash emissions from the Eyjafjallajökull eruption derived with an inversion algorithm which constrains modeled ash emissions with satellite observations of volcanic ash. The algorithm is tested with input from two different dispersion models, run on three different meteorological input data sets. The results are robust to which dispersion model and meteorological data are used. Modeled ash concentrations are compared quantitatively to independent measurements from three different research aircraft and one surface measurement station. These comparisons show that the models perform reasonably well in simulating the ash concentrations, and simulations using the source term obtained from the inversion are in overall better agreement with the observations (rank correlation = 0.55, Figure of Merit in Time (FMT) = 25–46%) than simulations using simplified source terms (rank correlation = 0.21, FMT = 20–35%). The vertical structures of the modeled ash clouds mostly agree with lidar observations, and the modeled ash particle size distributions agree reasonably well with observed size distributions. There are occasionally large differences between simulations but the model mean usually outperforms any individual model. The results emphasize the benefits of using an ensemble-based forecast for improved quantification of uncertainties in future ash crises.

A simplified method for referring the energy and overheating performance of window design

This paper describes a simplified dynamic thermal model which simulates the energy and overheating performance of windows. To calculate artificial energy use within a room, the model employs the average illuminance method, which takes into account the daylight energy impacting upon the room by the use of hourly climate data. This tool describes the main thermal performance ( heating, cooling and overheating risk) resulting proposed a design of window. The inputs are fewer and simpler than that are required by complicated simulation programmes. The method is suited for the use of architects and engineers at the strategic phase of design, when little is available.

A novel study of the polymerisation process involved in the formation of the network component of polymer-stabilised liquid crystals within electro-optic cells using high performance liquid chromatography

Polymer-stabilised liquid crystals are systems in which a small amount of monomer is dissolved within a liquid crystalline host, and then polymerised in situ to produce a network. The progress of the polymerisation, performed within electro-optic cells, was studied by establishing an analytical method novel to these systems. Samples were prepared by photopolymerisation of the monomer under well-defined reaction conditions; subsequent immersion in acetone caused the host and any unreacted monomer to dissolve. High performance liquid chromatography was used to separate and detect the various solutes in the resulting solutions, enabling the amount of unreacted monomer for a given set of conditions to be quantified. Longer irradiations cause a decrease in the proportion of unreacted monomer since more network is formed, while a more uniform LC director alignment (achieved by decreasing the sample thickness) or a higher level of order (achieved by decreasing the polymerisation temperature) promotes faster reactions.

The effect of multiple haptic distractors on the performance of motion-impaired users

The effect of multiple haptic distractors on target selection performance was examined in terms of times to select the target and the associated cursor movement patterns. Two experiments examined: a) The effect of multiple haptic distractors around a single target and b) the effect of inter-item spacing in a linear selection task. It was found that certain target-distractor arrangements hindered performance and that this could be associated with specific, explanatory cursor patterns. In particular, it was found that the presence of distractors along the task axis in front of the target was detrimental to performance, and that there was evidence to suggest that this could sometimes be associated with consequent cursor oscillation between distractors adjacent to a desired target. A further experiment examined the effect of target-distractor spacing in two orientations on a user’s ability to select a target when caught in the gravity well of a distractor. Times for movements in the vertical direction were found to be faster than those in the horizontal direction. In addition, although times for the vertical direction appeared equivalent across five target-distractor distances, times for the horizontal direction exhibited peaks at certain distances. The implications of these results for the design and implementation of haptically enhanced interfaces using the force feedback mouse are discussed.

Corporate real estate management in the retail sector: a study of the relationship between the management of the corporate real estate and corporate performance

Retail organisations have often been cited as being at the forefront of corporate real estate management. This research found that the retail sector can be characterised by diversity both in terms of the degree to which organisations are vertically integrated and in terms of the range of modes of retailing they engage in. This in turn led to highly diverse real estate portfolios. Given this diversity it may be surprising that the over riding strategy which the vast majority of sample firms adopted was focused on supporting the core retail activity. However the way in which they implement this strategy, again reflected the diversity in the sector. In terms of the future, the senior real estate managers were focusing on the medium term particularly looking at the way change would impact their functional strategy. This study provides a snap-shot of current practice and contributes to the debate however it also recognised that there is a need to answer the more fundamental questions.

The conditional performance of UK property funds

The evaluation of investment fund performance has been one of the main developments of modern portfolio theory. Most studies employ the technique developed by Jensen (1968) that compares a particular fund's returns to a benchmark portfolio of equal risk. However, the standard measures of fund manager performance are known to suffer from a number of problems in practice. In particular previous studies implicitly assume that the risk level of the portfolio is stationary through the evaluation period. That is unconditional measures of performance do not account for the fact that risk and expected returns may vary with the state of the economy. Therefore many of the problems encountered in previous performance studies reflect the inability of traditional measures to handle the dynamic behaviour of returns. As a consequence Ferson and Schadt (1996) suggest an approach to performance evaluation called conditional performance evaluation which is designed to address this problem. This paper utilises such a conditional measure of performance on a sample of 27 UK property funds, over the period 1987-1998. The results of which suggest that once the time varying nature of the funds beta is corrected for, by the addition of the market indicators, the average fund performance show an improvement over that of the traditional methods of analysis.

The initial return performance of UK property company IPOs

This paper presents empirical evidence for a sample of 48 UK property company initial public offerings over the period 1986 to 1995. From which a number of conclusions can be drawn. First, property companies in general show positive average first day returns. Second, the average first day return by property trading companies is significantly higher than that for property investment companies

The effects of institutional distance and headquarters’ financial performance on the generation of environmental standards in multinational companies

This article combines institutional and resources’ arguments to show that the institutional distance between the home and the host country, and the headquarters’ financial performance have a relevant impact on the environmental standardization decision in multinational companies. Using a sample of 135 multinational companies in three different industries with headquarters and subsidiaries based in the USA, Canada, Mexico, France, and Spain, we find that a high environmental institutional distance between headquarters’ and subsidiaries’ countries deters the standardization of environmental practices. On the other hand, high-profit headquarters are willing to standardize their environmental practices, rather than taking advantage of countries with lax environmental protection to undertake more pollution-intensive activities. Finally, we show that headquarters’ financial performance also imposes a moderating effect on the relationship between environmental institutional distance between countries and environmental standardization within the multinational company.

Elevated atmospheric carbon dioxide impairs the performance of root-feeding vine weevils by modifying root growth and secondary metabolites

Predicting how insect crop pests will respond to global climate change is an important part of increasing crop production for future food security, and will increasingly rely on empirically based evidence. The effects of atmospheric composition, especially elevated carbon dioxide (eCO(2)), on insect herbivores have been well studied, but this research has focussed almost exclusively on aboveground insects. However, responses of root-feeding insects to eCO(2) are unlikely to mirror these trends because of fundamental differences between aboveground and belowground habitats. Moreover, changes in secondary metabolites and defensive responses to insect attack under eCO(2) conditions are largely unexplored for root herbivore interactions. This study investigated how eCO(2) (700 mu mol mol-1) affected a root-feeding herbivore via changes to plant growth and concentrations of carbon (C), nitrogen (N) and phenolics. This study used the root-feeding vine weevil, Otiorhynchus sulcatus and the perennial crop, Ribes nigrum. Weevil populations decreased by 33% and body mass decreased by 23% (from 7.2 to 5.4 mg) in eCO(2). Root biomass decreased by 16% in eCO(2), which was strongly correlated with weevil performance. While root N concentrations fell by 8%, there were no significant effects of eCO(2) on root C and N concentrations. Weevils caused a sink in plants, resulting in 8-12% decreases in leaf C concentration following herbivory. There was an interactive effect of CO(2) and root herbivory on root phenolic concentrations, whereby weevils induced an increase at ambient CO(2), suggestive of defensive response, but caused a decrease under eCO(2). Contrary to predictions, there was a positive relationship between root phenolics and weevil performance. We conclude that impaired root-growth underpinned the negative effects of eCO(2) on vine weevils and speculate that the plant's failure to mount a defensive response at eCO(2) may have intensified these negative effects.

A comparison of the performance of Kalpana and Meteosat-7 WV radiances in the ECMWF NWP model

The Kalpana Very High Resolution Radiometer (VHRR) water vapour (WV) channel is very similar to the WV channel of the Meteosat Visible and Infrared Radiation Imager (MVIRI) on Meteosat-7, and both satellites observe the Indian subcontinent. Thus it is possible to compare the performance of VHRR and MVIRI in numerical weather prediction (NWP) models. In order to do so, the impact of Kalpana- and Meteosat-7-measured WV radiances was evaluated using analyses and forecasts of moisture, temperature, geopotential and winds, using the European Centre for Medium-range Weather Forecasts (ECMWF) NWP model. Compared with experiments using Meteosat-7, the experiments using Kalpana WV radiances show a similar fit to all observations and produce very similar forecasts.

Simulation of the future performance of low-energy evaporative cooling systems using UKCP09 climate projections

Recent activity in the development of future weather data for building performance simulation follows recognition of the limitations of traditional methods, which have been based on a stationary (observed) climate. In the UK, such developments have followed on from the availability of regional climate models as delivered in UKCIP02 and recently the probabilistic projections released under UKCP09. One major area of concern is the future performance and adaptability of buildings which employ exclusively passive or low-energy cooling systems. One such method which can be employed in an integral or retrofit situation is direct or indirect evaporative cooling. The effectiveness of evaporative cooling is most strongly influenced by the wet-bulb depression of the ambient air, hence is generally regarded as most suited to hot, dry climates. However, this technology has been shown to be effective in the UK, primarily in mixed-mode buildings or as a retrofit to industrial/commercial applications. Climate projections for the UK generally indicate an increase in the summer wet-bulb depression, suggesting an enhanced potential for the application of evaporative cooling. The paper illustrates this potential by an analysis of the probabilistic scenarios released under UKCP09, together with a detailed building/plant simulation of case study building located in the South-East of England. The results indicate a high probability that evaporative cooling will still be a viable low-energy technique in the 2050s.