Diseño y construcción del vertedero para el depósito del material de excavación del túnel del Espiño (Orense)

El presente documento presenta la definición de las obras e instalaciones necesarias para dar cobertura a unos niveles de producción de material de excavación proveniente del túnel del Espiño, para lo cual se decide construir el Vertedero del Espiño. Dicho vertedero cumple con la normativa ambiental, una vez finalizadas las actividades dentro del túnel el vertedero se clausura, sella y recupera medioambientalmente la zona afectada. Para ello se incluyen todos los documentos necesarios para la definición, justificación y valoración de las obras. This paper presents the definition of works and facilities needed to cover production levels of material from tunnel excavation Espiño, for which it is decided to build the weir Espiño. This landfill complies with environmental regulations, once finalized the activities inside the tunnel the landfill closes, environmentally sealed and recovers the affected area. To do all the necessary documents for the definition, justification and evaluation of the works included

Arquitectura antidesertización. Fluidez, biodiversidad, hidrofilia y transpirabilidad

La escasez de recursos, la desertización creciente y el previsible calentamiento global forman un escenario físico sin precedentes que urge la revisión de las relaciones entre arquitectura y agua en la urbanización de los paisajes secos, donde la aridez es el factor limitante principal. Cuestionar la idea de escasez, la de residuo o la de confort es el punto de partida para analizar la hidrología urbana. La condición ubicua y dinámica del agua, sus continuos cambios de estado y las implicaciones energéticas y ambientales involucradas argumentan a favor de un entendimiento integral, holístico, que aborda el diseño en relación a lo paisajístico, lo infraestructural y lo ambiental como un único ámbito de investigación, planteado en términos no solo de materia o de escasez, sino de energía. Este trabajo se interesa por el rol de la arquitectura en este proyecto conjunto, integral, del espacio físico con el ciclo hidrológico donde lo orgánico, lo geológico y lo atmosférico están ligados, y donde las categorías de lo hidrológico y lo hidráulico se confunden. Las profundas implicaciones culturales en la construcción de la naturaleza urbana y en la relación con el cuerpo humano adquieren especial notoriedad en los modelos de paisaje y de espacio público adoptados, importados desde las geografías húmedas, y en la estigmatización del agua desde los presupuestos del higienismo decimonónico, que conduce al hidrofugado general de una ciudad aséptica y estéril, que se extiende hasta las envolventes de fachadas estancas y los interiores blancos y satinados. La búsqueda de referentes salta la modernidad hacia contextos de baja energía como el oasis tradicional de las tierras áridas, que concilia la formación de un ecosistema productivo con la climatización de un espacio público exterior, o los ambientes aislados de la investigación aeroespacial, con ciclos cerrados de materia. Las condiciones del ciclo del agua, como la vinculación con el suelo y el territorio, la capacidad de disolver, de mezclarse y de lavar, su volumen variable y su papel como termorregulador señalan el interés que características físicas como la fluidez, la biodiversidad, la hidrofilia y la transpirabilidad tienen para una arquitectura con competencias hidráulicas y un espacio urbano transparente a los procesos del agua. La morfología y localización, la elección de escalas, jerarquías y relaciones entre espacios y la reformulación de los sistemas constructivos aparecen como herramientas y categorías propias desde las que proponer mejores respuestas a problemas como la deshidratación, la erosión y la contaminación. Una urbanización permeable e hidrófila que absorba el agua como un recurso valioso, nuevos ensamblajes para la bioquímica urbana (que introduzcan una idea de limpieza más próxima a fertilidad que a la desinfección), y el diseño de las condiciones atmosféricas a través de una arquitectura transpirable, que se empapa y rezuma frescor, son las claves de este nuevo proyecto. La ciudad se piensa como una síntesis multiescalar de espacios hidráulicos que aporta mayor resiliencia frente a la desertificación y las condiciones climáticas extremas, y mayor visibilidad en la escena pública al agua y a las inevitables conexiones entre ecología y economía. Pero también es una oportunidad para revisar las categorías disciplinares, para renovar las consistencias materiales, las calidades ambientales y las relaciones entre el cuerpo y el espacio. ABSTRACT The shortage of resources, foreseeable global warming and increasing desertification create an unprecedented prospect that question the existing relationships between water and architecture, in the urbanization of the arid lands. The awareness of the huge volumes of water that pierce unnoticed through urban space, their impact on the landscape as well as on environmental qualities, promote a design field where cultural, social and political considerations intersect, related to the body and the physical experience of space within the built environment. Fluidity and ubiquity, solution ability, variability and cyclical processes are characteristic of water as material, directly related with the fields of potential, chemical and thermal energy and the reality of its mass, as it occupies a changing volume in space. These are also the imposing cross sections that water introduces into the project, that argue in favor of a comprehensive and holistic understanding, of addressing design in relationship to landscape, infrastructure and environmental issues as a one single area of research. This work attempts to investigate how architecture, with its specific tools, can partake in the design of water cycle in the space, linking the organic, geological, and atmospheric, blurring the lines between hydrology and hydraulic. It aims to identify issues, within the continuous query associated with water, that deal with the architectural project and may have here better results. The deep cultural implications in the construction of urban nature and the relationship with the body, acquire special notoriety in the models of landscape and public space adopted, imported from humid geographies. Also in the stigmatization of water from the premises of nineteenth- century hygienics, which lead to the entire waterproofing of an aseptic and sterile city, to the sealed facades and white and polished interiors. The search for alternative references goes beyond modernity towards a mindset of low energy, as the traditional oasis of arid lands, which aims to reconcile the formation of a productive ecosystem with the conditioning of an outdoor public space, or the controlled environments of aerospace research, with closed cycles of matter. Fluidity, biodiversity, hydrophilicity and breathability are characteristic of an architecture with hydraulic competences. The distributing phenomenon of water, its necessary connectivity to the ground and to small cycles in the ecosystems, shows strong affinities with an infrastructural architecture, as an alternative to large-scale centralized networks. Its volume has approximated to the dimensions of the built space, promoting a new found condition of coexistence. A permeable and hydrophilic urbanization absorbs water as a valuable resource; new assemblies for urban biochemistry introduce an idea of sanitation closer to fertility than to disinfection; a breathable architecture that soaks and exudes freshness design the atmospheric conditions: these are the essential components of this new project. The city is understood as a synthesis of multi-scale hydraulic spaces that provides greater resilience against desertification and increases the visibility of water and the linkages between ecology and economy in the public scene. It is also an opportunity to review the disciplinary categories of architecture, the material consistencies, the environmental qualities and the relationship between body and space.

El análogo natural de almacenamiento y escape de Co2 de la cuenca de Gañuelas-Mazarrón : implicaciones para el comportamiento y la seguridad de un almacenamiento de Co2 en estaso supercrítico

El aumento de la temperatura media de la Tierra durante el pasado siglo en casi 1 ºC; la subida del nivel medio del mar; la disminución del volumen de hielo y nieve terrestres; la fuerte variabilidad del clima y los episodios climáticos extremos que se vienen sucediendo durante las ultimas décadas; y el aumento de las epidemias y enfermedades infecciosas son solo algunas de las evidencias del cambio climático actual, causado, principalmente, por la acumulación de gases de efecto invernadero en la atmósfera por actividades antropogénicas. La problemática y preocupación creciente surgida a raíz de estos fenómenos, motivo que, en 1997, se adoptara el denominado “Protocolo de Kyoto” (Japón), por el que los países firmantes adoptaron diferentes medidas destinadas a controlar y reducir las emisiones de los citados gases. Entre estas medidas cabe destacar las tecnologías CAC, enfocadas a la captura, transporte y almacenamiento de CO2. En este contexto se aprobó, en octubre de 2008, el Proyecto Singular Estratégico “Tecnologías avanzadas de generación, captura y almacenamiento de CO2” (PSE-120000-2008-6), cofinanciado por el Ministerio de Ciencia e Innovación y el FEDER, el cual abordaba, en su Subproyecto “Almacenamiento Geológico de CO2” (PSS-120000-2008-31), el estudio detallado, entre otros, del Análogo Natural de Almacenamiento y Escape de CO2 de la cuenca de Ganuelas-Mazarrón (Murcia). Es precisamente en el marco de dicho Proyecto en el que se ha realizado este trabajo, cuyo objetivo final ha sido el de predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un Almacenamiento Geológico Profundo de CO2 (AGP-CO2), mediante el estudio integral del citado análogo natural. Este estudio ha comprendido: i) la contextualización geológica e hidrogeológica de la cuenca, así como la investigación geofísica de la misma; ii) la toma de muestras de aguas de algunos acuíferos seleccionados con el fin de realizar su estudio hidrogeoquímico e isotópico; iii) la caracterización mineralógica, petrográfica, geoquímica e isotópica de los travertinos precipitados a partir de las aguas de algunos de los sondeos de la cuenca; y iv) la medida y caracterización química e isotópica de los gases libres y disueltos detectados en la cuenca, con especial atención al CO2 y 222Rn. Esta información, desarrollada en capítulos independientes, ha permitido realizar un modelo conceptual de funcionamiento del sistema natural que constituye la cuenca de Ganuelas-Mazarrón, así como establecer las analogías entre este y un AGP-CO2, con posibles escapes naturales y/o antropogénicos. La aplicación de toda esta información ha servido, por un lado, para predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un AGP-CO2 y, por otro, proponer una metodología general aplicable al estudio de posibles emplazamientos de AGP-CO2 desde la perspectiva de los reservorios naturales de CO2. Los resultados más importantes indican que la cuenca de Ganuelas-Mazarrón se trata de una cubeta o fosa tectónica delimitada por fallas normales, con importantes saltos verticales, que hunden al substrato rocoso (Complejo Nevado-Filabride), y rellenas, generalmente, por materiales volcánicos-subvolcánicos ácidos. Además, esta cuenca se encuentra rellena por formaciones menos resistivas que son, de muro a techo, las margas miocenas, predominantes y casi exclusivas de la cuenca, y los conglomerados y gravas pliocuaternarias. El acuífero salino profundo y enriquecido en CO2, puesto de manifiesto por la xx exploración geotérmica realizada en dicha cuenca durante la década de los 80 y objeto principal de este estudio, se encuentra a techo de los materiales del Complejo Nevado-Filabride, a una profundidad que podría superar los 800 m, según los datos de la investigación mediante sondeos y geofísica. Por ello, no se descarta la posibilidad de que el CO2 se encuentre en estado supe critico, por lo que la citada cuenca reuniría las características principales de un almacenamiento geológico natural y profundo de CO2, o análogo natural de un AGP-CO2 en un acuífero salino profundo. La sobreexplotación de los acuíferos mas someros de la cuenca, con fines agrícolas, origino, por el descenso de sus niveles piezométricos y de la presión hidrostática, el ascenso de las aguas profundas, salinas y enriquecidas en CO2, las cuales son las responsables de la contaminación de dichos acuíferos. El estudio hidrogeoquímico de las aguas de los acuíferos investigados muestra una gran variedad de hidrofacies, incluso en aquellos de litología similar. La alta salinidad de estas aguas las hace inservibles tanto para el consumo humano como para fines agrícolas. Además, el carácter ligeramente ácido de la mayoría de estas aguas determina que tengan gran capacidad para disolver y transportar, hacia la superficie, elementos pesados y/o tóxicos, entre los que destaca el U, elemento abundante en las rocas volcánicas ácidas de la cuenca, con contenidos de hasta 14 ppm, y en forma de uraninita submicroscópica. El estudio isotópico ha permitido discernir el origen, entre otros, del C del DIC de las aguas (δ13C-DIC), explicándose como una mezcla de dos componentes principales: uno, procedente de la descomposición térmica de las calizas y mármoles del substrato y, otro, de origen edáfico, sin descartar una aportación menor de C de origen mantélico. El estudio de los travertinos que se están formando a la salida de las aguas de algunos sondeos, por la desgasificación rápida de CO2 y el consiguiente aumento de pH, ha permitido destacar este fenómeno, por analogía, como alerta de escapes de CO2 desde un AGP-CO2. El análisis de los gases disueltos y libres, con especial atención al CO2 y al 222Rn asociado, indican que el C del CO2, tanto disuelto como en fase libre, tiene un origen similar al del DIC, confirmándose la menor contribución de CO2 de origen mantélico, dada la relación R/Ra del He existente en estos gases. El 222Rn sería el generado por el decaimiento radiactivo del U, particularmente abundante en las rocas volcánicas de la cuenca, y/o por el 226Ra procedente del U o del existente en los yesos mesinienses de la cuenca. Además, el CO2 actúa como carrier del 222Rn, hecho evidenciado en las anomalías positivas de ambos gases a ~ 1 m de profundidad y relacionadas principalmente con perturbaciones naturales (fallas y contactos) y antropogénicas (sondeos). La signatura isotópica del C a partir del DIC, de los carbonatos (travertinos), y del CO2 disuelto y libre, sugiere que esta señal puede usarse como un excelente trazador de los escapes de CO2 desde un AGPCO2, en el cual se inyectara un CO2 procedente, generalmente, de la combustión de combustibles fósiles, con un δ13C(V-PDB) de ~ -30 ‰. Estos resultados han permitido construir un modelo conceptual de funcionamiento del sistema natural de la cuenca de Ganuelas-Mazarrón como análogo natural de un AGP-CO2, y establecer las relaciones entre ambos. Así, las analogías mas importantes, en cuanto a los elementos del sistema, serian la existencia de: i) un acuífero salino profundo enriquecido en CO2, que seria análoga a la formación almacén de un AGPxxi CO2; ii) una formación sedimentaria margosa que, con una potencia superior a 500 m, se correspondería con la formación sello de un AGP-CO2; y iii) acuíferos mas someros con aguas dulces y aptas para el consumo humano, rocas volcánicas ricas en U y fallas que se encuentran selladas por yesos y/o margas; elementos que también podrían concurrir en un emplazamiento de un AGP-CO2. Por otro lado, los procesos análogos mas importantes identificados serian: i) la inyección ascendente del CO2, que seria análoga a la inyección de CO2 de origen antropogénico, pero este con una signatura isotópica δ13C(V-PDB) de ~ -30 ‰; ii) la disolución de CO2 y 222Rn en las aguas del acuífero profundo, lo que seria análogo a la disolución de dichos gases en la formación almacén de un AGP-CO2; iii) la contaminación de los acuíferos mas someros por el ascenso de las aguas sobresaturadas en CO2, proceso que seria análogo a la contaminación que se produciría en los acuíferos existentes por encima de un AGP-CO2, siempre que este se perturbara natural (reactivación de fallas) o artificialmente (sondeos); iv) la desgasificación (CO2 y gases asociados, entre los que destaca el 222Rn) del acuífero salino profundo a través de sondeos, proceso análogo al que pudiera ocurrir en un AGP-CO2 perturbado; y v) la formación rápida de travertinos, proceso análogo indicativo de que el AGP-CO2 ha perdido su estanqueidad. La identificación de las analogías más importantes ha permitido, además, analizar y evaluar, de manera aproximada, el comportamiento y la seguridad, a corto, medio y largo plazo, de un AGP-CO2 emplazado en un contexto geológico similar al sistema natural estudiado. Para ello se ha seguido la metodología basada en el análisis e identificación de los FEPs (Features, Events and Processes), los cuales se han combinado entre sí para generar y analizar diferentes escenarios de evolución del sistema (scenario analysis). Estos escenarios de evolución identificados en el sistema natural perturbado, relacionados con la perforación de sondeos, sobreexplotación de acuíferos, precipitación rápida de travertinos, etc., serian análogos a los que podrían ocurrir en un AGP-CO2 que también fuera perturbado antropogénicamente, por lo que resulta totalmente necesario evitar la perturbación artificial de la formación sello del AGPCO2. Por último, con toda la información obtenida se ha propuesto una metodología de estudio que pueda aplicarse al estudio de posibles emplazamientos de un AGP-CO2 desde la perspectiva de los reservorios naturales de CO2, sean estancos o no. Esta metodología comprende varias fases de estudio, que comprendería la caracterización geológico-estructural del sitio y de sus componentes (agua, roca y gases), la identificación de las analogías entre un sistema natural de almacenamiento de CO2 y un modelo conceptual de un AGP-CO2, y el establecimiento de las implicaciones para el comportamiento y la seguridad de un AGP-CO2. ABSTRACT The accumulation of the anthropogenic greenhouse gases in the atmosphere is the main responsible for: i) the increase in the average temperature of the Earth over the past century by almost 1 °C; ii) the rise in the mean sea level; iii) the drop of the ice volume and terrestrial snow; iv) the strong climate variability and extreme weather events that have been happening over the last decades; and v) the spread of epidemics and infectious diseases. All of these events are just some of the evidence of current climate change. The problems and growing concern related to these phenomena, prompted the adoption of the so-called "Kyoto Protocol" (Japan) in 1997, in which the signatory countries established different measurements to control and reduce the emissions of the greenhouse gases. These measurements include the CCS technologies, focused on the capture, transport and storage of CO2. Within this context, it was approved, in October 2008, the Strategic Singular Project "Tecnologías avanzadas de generación, captura y almacenamiento de CO2" (PSE-120000-2008-6), supported by the Ministry of Science and Innovation and the FEDER funds. This Project, by means of the Subproject "Geological Storage of CO2" (PSS- 120000-2008-31), was focused on the detailed study of the Natural Analogue of CO2 Storage and Leakage located in the Ganuelas-Mazarron Tertiary basin (Murcia), among other Spanish Natural Analogues. This research work has been performed in the framework of this Subproject, being its final objective to predict the behaviour and evaluate the safety, at short, medium and long-term, of a CO2 Deep Geological Storage (CO2-DGS) by means of a comprehensive study of the abovementioned Natural Analogue. This study comprises: i) the geological and hydrogeological context of the basin and its geophysical research; ii) the water sampling of the selected aquifers to establish their hydrogeochemical and isotopic features; iii) the mineralogical, petrographic, geochemical and isotopic characterisation of the travertines formed from upwelling groundwater of several hydrogeological and geothermal wells; and iv) the measurement of the free and dissolved gases detected in the basin, as well as their chemical and isotopic characterisation, mainly regarding CO2 and 222Rn. This information, summarised in separate chapters in the text, has enabled to build a conceptual model of the studied natural system and to establish the analogies between both the studied natural system and a CO2-DGS, with possible natural and/or anthropogenic escapes. All this information has served, firstly, to predict the behaviour and to evaluate the safety, at short, medium and long-term, of a CO2-DGS and, secondly, to propose a general methodology to study suitable sites for a CO2-DGS, taking into account the lessons learned from this CO2 natural reservoir. The main results indicate that the Ganuelas-Mazarron basin is a graben bounded by normal faults with significant vertical movements, which move down the metamorphic substrate (Nevado-Filabride Complex), and filled with acid volcanic-subvolcanic rocks. Furthermore, this basin is filled with two sedimentary formations: i) the Miocene marls, which are predominant and almost exclusive in the basin; xxiv and ii) the Plio-Quaternary conglomerates and gravels. A deep saline CO2-rich aquifer was evidenced in this basin as a result of the geothermal exploration wells performed during the 80s, located just at the top of the Nevado-Filabride Complex and at a depth that could exceed 800 m, according to the geophysical exploration performed. This saline CO2-rich aquifer is precisely the main object of this study. Therefore, it is not discarded the possibility that the CO2 in this aquifer be in supercritical state. Consequently, the aforementioned basin gathers the main characteristics of a natural and deep CO2 geological storage, or natural analogue of a CO2-DGS in a deep saline aquifer. The overexploitation of the shallow aquifers in this basin for agriculture purposes caused the drop of the groundwater levels and hydrostatic pressures, and, as a result, the ascent of the deep saline and CO2-rich groundwater, which is the responsible for the contamination of the shallow and fresh aquifers. The hydrogeochemical features of groundwater from the investigated aquifers show the presence of very different hydrofacies, even in those with similar lithology. The high salinity of this groundwater prevents the human and agricultural uses. In addition, the slightly acidic character of most of these waters determines their capacity to dissolve and transport towards the surface heavy and/or toxic elements, among which U is highlighted. This element is abundant in the acidic volcanic rocks of the basin, with concentrations up to 14 ppm, mainly as sub-microscopic uraninite crystals. The isotopic study of this groundwater, particularly the isotopic signature of C from DIC (δ13C-DIC), suggests that dissolved C can be explained considering a mixture of C from two main different sources: i) from the thermal decomposition of limestones and marbles forming the substrate; and ii) from edaphic origin. However, a minor contribution of C from mantle degassing cannot be discarded. The study of travertines being formed from upwelling groundwater of several hydrogeological and geothermal wells, as a result of the fast CO2 degassing and the pH increase, has allowed highlighting this phenomenon, by analogy, as an alert for the CO2 leakages from a CO2-DGS. The analysis of the dissolved and free gases, with special attention to CO2 and 222Rn, indicates that the C from the dissolved and free CO2 has a similar origin to that of the DIC. The R/Ra ratio of He corroborates the minor contribution of CO2 from the mantle degassing. Furthermore, 222Rn is generated by the radioactive decay of U, particularly abundant in the volcanic rocks of the basin, and/or by 226Ra from the U or from the Messinian gypsum in the basin. Moreover, CO2 acts as a carrier of the 222Rn, a fact evidenced by the positive anomalies of both gases at ~ 1 m depth and mainly related to natural (faults and contacts) and anthropogenic (wells) perturbations. The isotopic signature of C from DIC, carbonates (travertines), and dissolved and free CO2, suggests that this parameter can be used as an excellent tracer of CO2 escapes from a CO2-DGS, in which CO2 usually from the combustion of fossil fuels, with δ13C(V-PDB) of ~ -30 ‰, will be injected. All of these results have allowed to build a conceptual model of the behaviour of the natural system studied as a natural analogue of a CO2-DGS, as well as to establish the relationships between both natural xxv and artificial systems. Thus, the most important analogies, regarding the elements of the system, would be the presence of: i) a deep saline CO2-rich aquifer, which would be analogous to the storage formation of a CO2-DGS; ii) a marly sedimentary formation with a thickness greater than 500 m, which would correspond to the sealing formation of a CO2-DGS; and iii) shallow aquifers with fresh waters suitable for human consumption, U-rich volcanic rocks, and faults that are sealed by gypsums and/or marls; geological elements that could also be present in a CO2-DGS. On the other hand, the most important analogous processes identified are: i) the upward injection of CO2, which would be analogous to the downward injection of the anthropogenic CO2, this last with a δ13C(V-PDB) of ~ -30 ‰; ii) the dissolution of CO2 and 222Rn in groundwater of the deep aquifer, which would be analogous to the dissolution of these gases in the storage formation of a CO2-DGS; iii) the contamination of the shallow aquifers by the uprising of CO2-oversaturated groundwater, an analogous process to the contamination that would occur in shallow aquifers located above a CO2-DGS, whenever it was naturally (reactivation of faults) or artificially (wells) perturbed; iv) the degassing (CO2 and associated gases, among which 222Rn is remarkable) of the deep saline aquifer through wells, process which could be similar in a perturbed CO2- DGS; v) the rapid formation of travertines, indicating that the CO2-DGS has lost its seal capacity. The identification of the most important analogies has also allowed analysing and evaluating, approximately, the behaviour and safety in the short, medium and long term, of a CO2-DGS hosted in a similar geological context of the natural system studied. For that, it has been followed the methodology based on the analysis and identification of FEPs (Features, Events and Processes) that have been combined together in order to generate and analyse different scenarios of the system evolution (scenario analysis). These identified scenarios in the perturbed natural system, related to boreholes, overexploitation of aquifers, rapid precipitation of travertines, etc., would be similar to those that might occur in a CO2-DGS anthropogenically perturbed, so that it is absolutely necessary to avoid the artificial perturbation of the seal formation of a CO2-DGS. Finally, a useful methodology for the study of possible sites for a CO2-DGS is suggested based on the information obtained from this investigation, taking into account the lessons learned from this CO2 natural reservoir. This methodology comprises several phases of study, including the geological and structural characterisation of the site and its components (water, rock and gases), the identification of the analogies between a CO2 storage natural system and a conceptual model of a CO2-DGS, and the implications regarding the behaviour and safety of a CO2-DGS.

Effects of a bifenthrin-treated net on the natural enemies Aphidius colemani (Haliday) and Adalia bipunctata L. in a cucumber crop in Central Spain. Semi-field experiments

Pest management practices that rely on pesticides are growing increasingly less effective and environmentally inappropriate in many cases and the search of alternatives is under focus nowadays. Exclusion of pests from the crop by means of pesticide-treated screens can be an eco-friendly method to protect crops, especially if pests are vectors of important diseases. The mesh size of nets is crucial to determine if insects can eventually cross the barrier or exclude them because there is a great variation in insect size depending on the species. Long-lasting insecticide-treated (LLITN) nets, factory pre-treated, have been used since years to fight against mosquitoes vector of malaria and are able to retain their biological efficacy under field for 3 years. In agriculture, treated nets with different insecticides have shown efficacy in controlling some insects and mites, so they seem to be a good tool in helping to solve some pest problems. However, treated nets must be carefully evaluated because can diminish air flow, increase temperature and humidity and decrease light transmission, which may affect plant growth, pests and natural enemies. As biological control is considered a key factor in IPM nowadays, the potential negative effects of treated nets on natural enemies need to be studied carefully. In this work, the effects of a bifentrhin-treated net (3 g/Kg) (supplied by the company Intelligent Insect Control, IIC) on natural enemies of aphids were tested on a cucumber crop in Central Spain in autumn 2011. The crop was sown in 8x6.5 m tunnels divided in 2 sealed compartments with control or treated nets, which were simple yellow netting with 25 mesh (10 x 10 threads/cm2; 1 x 1 mm hole size). Pieces of 2 m high of the treated-net were placed along the lateral sides of one of the two tunnel compartments in each of the 3 available tunnels (replicates); the rest was covered by a commercial untreated net of a similar mesh. The pest, Aphis gossypii Glover (Aphidae), the parasitoid Aphidius colemani (Haliday) (Braconidae) and the predator Adalia bipunctata L. (Coccinellidae) were artificially introduced in the crop. Weekly sampling was done determining the presence or absence of the pest and the natural enemies (NE) in the 42 plants/compartment as well as the number of insects in 11 marked plants. Environmental conditions (temperature, relative humidity, UV and PAR radiation) were recorded. Results show that when aphids were artificially released inside the tunnels, neither its number/plant nor their distribution was affected by the treated net. A lack of negative effect of the insecticide-treated net on natural enemies was also observed. Adalia bipunctata did not establish in the crop and only a short term control of aphids was observed one week after release. On the other hand, A. colemani did establish in the crop and a more long-term effect on the numbers of aphids/plant was detected irrespective of the type of net. KEY WORDS: bifenthrin-treated net, Adalia bipunctata, Aphidius colemani, Aphis gossypii, semi-field

La Península Ibérica en el transporte masivo de mercancías entre Europa y África : futuras autopistas del mar

La competitividad del transporte de mercancías depende del estado y funcionamiento de las redes existentes y de sus infraestructuras, no del modo de transporte. En concreto, la rentabilidad o la reducción de los costes de producción del transporte marítimo se vería incrementado con el uso de buques de mayor capacidad y con el desarrollo de plataformas portuarias de distribución o puertos secos, ya que el 90% del comercio entre la Unión Europea y terceros países se realiza a través de sus puertos a un promedio de 3,2 billones de toneladas de mercancías manipuladas cada año y el 40% del tráfico intraeuropeo utiliza el transporte marítimo de corta distancia. A pesar de que los puertos europeos acogen anualmente a más de 400 millones de pasajeros, los grandes desarrollos se han producido en los puertos del norte de Europa (Róterdam, Amberes, Ámsterdam). Los países del Sur de Europa deben buscar nuevas fórmulas para ser más competitivos, ya sea mediante creación de nuevas infraestructuras o mediante refuerzo de las existentes, ofreciendo los costes de los puertos del Norte. El fomento del transporte marítimo y fluvial como alternativa al transporte por carretera, especialmente el transporte marítimo de corta distancia, ha sido impulsado por la Comisión Europea (CE) desde 2003 a través de programas de apoyo comunitario de aplicación directa a las Autopistas del Mar, a modo de ejemplo, cabría citar los programas Marco Polo I y II, los cuales contaron con una dotación presupuestaria total de 855 millones de euros para el período 2003 – 2013; en ese período de tiempo se establecieron objetivos de reducción de congestión vial y mejora del comportamiento medio ambiental del sistema de transporte de mercancías dentro de la comunidad y la potenciación de la intermodalidad. El concepto de Autopista del Mar surge en el Libro Blanco de Transportes de la Comisión Europea “La política europea de transportes de cara al 2010: La hora de la verdad” del 12 de diciembre de 2001, en el marco de una política europea para fomento y desarrollo de sistemas de transportes sostenibles. Las Autopistas del Mar consisten en rutas marítimas de corta distancia entre dos puntos, de menor distancia que por vía terrestre, en las que a través del transporte intermodal mejoran significativamente los tiempos y costes de la cadena logística, contribuyen a la reducción de accidentes, ruidos y emisiones de CO2 a la atmósfera, permite que los conductores pierdan horas de trabajo al volante y evita el deterioro de las infraestructuras terrestres, con el consiguiente ahorro en mantenimiento. La viabilidad de una Autopista del Mar depende tanto de factores de ubicación geográficos, como de características propias del puerto, pasando por los diferentes requerimientos del mercado en cada momento (energéticos, medio ambientales y tecnológicos). Existe un elemento nuevo creado por la Comisión Europea: la red transeuropea de transportes (RTE-T). En el caso de España, con sus dos accesos por los Pirineos (La Junquera e Irún) como únicos pasos terrestres de comunicación con el continente y con importantes limitaciones ferroviarias debido a los tres anchos de vía distintos, le resta competitividad frente al conjunto europeo; por el contrario, España es el país europeo con más kilómetros de costa (con más de 8.000 km) y con un emplazamiento geográfico estratégico, lo que le convierte en una plataforma logística para todo el sur de Europa, por lo que las Autopistas del Mar tendrán un papel importante y casi obligado para el desarrollo de los grandes corredores marítimos que promueve Europa. De hecho, Gijón y Vigo lo han hecho muy bien con sus respectivas líneas definidas como Autopistas del Mar y que conectan con el puerto francés de Nantes-Saint Nazaire, ya que desde ahí los camiones pueden coger rutas hacia el Norte. Paralelamente, la Unión Europea ha iniciado los pasos para el impulso de la primera Autopista del Mar que conectará España con el mercado de Reino Unido, concretamente los Puertos de Bilbao y Tilbury. Además, España e Italia sellaron un acuerdo internacional para desarrollar Autopistas del Mar entre ambos países, comprometiéndose a impulsar una docena de rutas entre puertos del litoral mediterráneo español y el italiano. Actualmente, están en funcionando los trayectos como Barcelona-Génova, Valencia-Civitavecchia y Alicante- Nápoles, notablemente más cortos por mar que por carretera. Bruselas identificó cuatro grandes corredores marítimos que podrían concentrar una alta densidad de tráfico de buques, y en dos de ellos España ya tenía desde un principio un papel crucial. La Comisión diseñó el 14 de abril de 2004, a través del proyecto West-Mos, una red de tráfico marítimo que tiene como vías fundamentales la denominada Autopista del Báltico (que enlaza Europa central y occidental con los países bálticos), la Autopista de Europa suroriental (que une el Adriático con el Jónico y el Mediterráneo más oriental) y también la Autopista de Europa occidental y la Autopista de Europa suroccidental (que enlazan España con Reino Unido y la Francia atlántica y con la Francia mediterránea e Italia, respectivamente). Para poder establecer Autopistas del Mar entre la Península Ibérica y el Norte de Europa primará especialmente la retirada de camiones en la frontera pirenaica, donde el tráfico pesado tiene actualmente una intensidad media diaria de 8.000 unidades, actuando sobre los puntos de mayor congestión, como por ejemplo los Alpes, los Pirineos, el Canal de la Mancha, las carreteras fronterizas de Francia y Euskadi, y proponiendo el traslado de las mercancías en barcos o en trenes. Por su parte, para contar con los subsidios y apoyos europeos las rutas seleccionadas como Autopistas del Mar deben mantener una serie de criterios de calidad relacionados con la frecuencia, coste “plataforma logística a plataforma logística”, simplicidad en procedimientos administrativos y participación de varios países, entre otros. Los estudios consideran inicialmente viables los tramos marítimos superiores a 450 millas, con un volumen de unas 15.000 plataformas al año y que dispongan de eficientes comunicaciones desde el puerto a las redes transeuropeas de autopistas y ferrocarril. Otro objetivo de las Autopistas del Mar es desarrollar las capacidades portuarias de forma que se puedan conectar mejor las regiones periféricas a escala del continente europeo. En lo que a Puertos se refiere, las terminales en los muelles deben contar con una línea de atraque de 250 m., un calado superior a 8 m., una rampa “ro-ro” de doble calzada, grúas portainer, y garantizar operatividad para un mínimo de dos frecuencias de carga semanales. El 28 de marzo de 2011 se publicó el segundo Libro Blanco sobre el futuro del transporte en Europa “Hoja de ruta hacia un espacio único europeo de transporte: por una política de transportes competitiva y sostenible”, donde se definió el marco general de las acciones a emprender en los próximos diez años en el ámbito de las infraestructuras de transporte, la legislación del mercado interior, la reducción de la dependencia del carbono, la tecnología para la gestión del tráfico y los vehículos limpios, así como la estandarización de los distintos mercados. Entre los principales desafíos se encuentran la eliminación de los cuellos de botella y obstáculos diversos de nuestra red europea de transporte, minimizar la dependencia del petróleo, reducir las emisiones de GEI en un 60% para 2050 con respecto a los niveles de 1990 y la inversión en nuevas tecnologías e infraestructuras que reduzcan estas emisiones de transporte en la UE. La conexión entre la UE y el norte de África provoca elevados niveles de congestión en los puntos más críticos del trayecto: frontera hispano-francesa, corredor del Mediterráneo y el paso del estrecho. A esto se le añade el hecho de que el sector del transporte por carretera está sujeto a una creciente competencia de mercado motivada por la eliminación de las barreras europeas, mayores exigencias de los cargadores, mayores restricciones a los conductores y aumento del precio del gasóleo. Por otro lado, el mercado potencial de pasajeros tiene una clara diferenciación en tipos de flujos: los flujos en el período extraordinario de la Operación Paso del Estrecho (OPE), enfocado principalmente a marroquíes que vuelven a su país de vacaciones; y los flujos en el período ordinario, enfocado a la movilidad global de la población. Por tanto, lo que se pretende conseguir con este estudio es analizar la situación actual del tráfico de mercancías y pasajeros con origen o destino la península ibérica y sus causas, así como la investigación de las ventajas de la creación de una conexión marítima (Autopista del Mar) con el Norte de África, basándose en los condicionantes técnicos, administrativos, económicos, políticos, sociales y medio ambientales. The competitiveness of freight transport depends on the condition and operation of existing networks and infrastructure, not the mode of transport. In particular, profitability could be increased or production costs of maritime transport could be reduced by using vessels with greater capacity and developing port distribution platforms or dry ports, seeing as 90% of trade between the European Union and third countries happens through its ports. On average 3,2 billion tonnes of freight are handled annualy and 40% of intra-European traffic uses Short Sea Shipping. In spite of European ports annually hosting more than 400 million passengers, there have been major developments in the northern European ports (Rotterdam, Antwerp, Amsterdam). Southern European countries need to find new ways to be more competitive, either by building new infrastructure or by strengthening existing infrastructure, offering costs northern ports. The use of maritime and river transport as an alternative to road transport, especially Short Sea Shipping, has been driven by the European Commission (EC) from 2003 through community support programs for the Motorways of the Sea. These programs include, for example, the Marco Polo I and II programs, which had a total budget of 855 million euros for the period 2003-2013. During this time objectives were set for reducing road congestion, improving the environmental performance of the freight transport system within the community and enhancing intermodal transport. The “Motorway of the Sea” concept arises in the European Commission’s Transport White Paper "European transport policy for 2010: time to decide" on 12 December 2001, as part of a European policy for the development and promotion of sustainable transport systems. A Motorway of the Sea is defined as a short sea route between two points, covering less distance than by road, which provides a significant improvement in intermodal transport times and to the cost supply chain. It contributes to reducing accidents, noise and CO2 emissions, allows drivers to shorten their driving time and prevents the deterioration of land infrastructure thereby saving on maintenance costs. The viability of a Motorway of the Sea depends as much on geographical location factors as on characteristics of the port, taking into account the different market requirements at all times (energy, environmental and technological). There is a new element created by the European Commission: the trans-European transport network (TEN-T). In the case of Spain, with its two access points in the Pyrenees (La Junquera and Irun) as the only land crossings connected to the mainland and major railway limitations due to the three different gauges, it appears less competitive compared to Europe as a whole. However, Spain is the European country with the most kilometers of coastline (over 8,000 km) and a strategic geographical location, which makes it a logistics platform for the all of Southern Europe. This is why the Motorways of the Sea will have an important role, and an almost necessary one to develop major maritime corridors that Europe supports. In fact, Gijon and Vigo have done very well with their respective sea lanes defined as Motorways of the Sea and which connect with the French port of Nantes-Saint Nazaire, as from there trucks can use nort-heading routes. In parallel, the European Union has taken the first steps to boost the first Motorway of the Sea linking Spain to the UK market, specifically the ports of Bilbao and Tilbury. Furthermore, Spain and Italy sealed an international agreement to develop Motorways of the Sea between both countries, pledging to develop a dozen routes between ports on the Spanish and Italian Mediterranean coasts. Currently, there are sea lanes already in use such as Barcelona-Genova, Valencia-Civitavecchia and Alicante-Naples, these are significantly shorter routes by sea than by road. Brussels identified four major maritime corridors that could hold heavy concentrate shipping traffic, and Spain had a crucial role in two of these from the beginning. On 14 April 2004 the Commission planned through the West-Mos project, a network of maritime traffic which includes the essential sea passages the so-called Baltic Motorway (linking Central and Western Europe with the Baltic countries), the southeast Europe Motorway (linking the Adriatic to the Ionian and eastern Mediterranean Sea), the Western Europe Motorway and southwestern Europe Motorway (that links Spain with Britain and the Atlantic coast of France and with the French Mediterranean coast and Italy, respectively). In order to establish Motorways of the Sea between the Iberian Peninsula and Northern Europe especially, it is necessary to remove trucks from the Pyrenean border, where sees heavy traffic (on average 8000 trucks per day) and addressing the points of greatest congestion, such as the Alps, the Pyrenees, the English Channel, the border roads of France and Euskadi, and proposing the transfer of freight on ships or trains. For its part, in order to receive subsidies and support from the European Commission, the routes selected as Motorways of the Sea should maintain a series of quality criteria related to frequency, costs "from logistics platform to logistics platform," simplicity in administrative procedures and participation of several countries, among others. To begin with, studies consider viable a maritime stretch of at least 450 miles with a volume of about 15,000 platforms per year and that have efficient connections from port to trans-European motorways and rail networks. Another objective of the Motorways of the Sea is to develop port capacity so that they can better connect peripheral regions across the European continent. Referring ports, the terminals at the docks must have a berthing line of 250 m., a draft greater than 8 m, a dual carriageway "ro-ro" ramp, portainer cranes, and ensure operability for a minimum of two loads per week. On 28 March 2011 the second White Paper about the future of transport in Europe "Roadmap to a Single European Transport Area – Towards a competitive and resource efficient transport system" was published. In this Paper the general framework of actions to be undertaken in the next ten years in the field of transport infrastructure was defined, including internal market legislation, reduction of carbon dependency, traffic management technology and clean vehicles, as well as the standardization of different markets. The main challenges are how to eliminate bottlenecks and various obstacles in our European transport network, minimize dependence on oil, reduce GHG emissions by 60% by 2050 compared to 1990 levels and encourage investment in new technologies and infrastructure that reduce EU transport emissions. The connection between the EU and North Africa causes high levels of congestion on the most critical points of the journey: the Spanish-French border, the Mediterranean corridor and Gibraltar Strait. In addition to this, the road transport sector is subject to increased market competition motivated by the elimination of European barriers, greater demands of shippers, greater restrictions on drivers and an increase in the price of diesel. On the other hand, the potential passenger market has a clear differentiation in type of flows: flows in the special period of the Crossing the Straits Operation (CSO), mainly focused on Moroccans who return home on vacation; and flows in the regular session, focused on the global mobile population. Therefore, what I want to achieve with this study is present an analysis of the current situation of freight and passengers to or from the Iberian Peninsula and their causes, as well as present research on the advantages of creating a maritime connection (Motorways of the Sea) with North Africa, based on the technical, administrative, economic, political, social and environmental conditions.

CD68+ cells of monocyte/macrophage lineage in the environment of AIDS-associated and classic-sporadic Kaposi sarcoma are singly or doubly infected with human herpesviruses 7 and 6B

Earlier studies have shown that Kaposi sarcomas contain cells infected with human herpesvirus (HHV) 6B, and in current studies we report that both AIDS-associated and classic-sporadic Kaposi sarcoma contain HHV-7 genome sequences detectable by PCR. To determine the distribution of HHV-7-infected cells relative to those infected with HHV-6, sections from paraffin-embedded tissues were allowed to react with antibodies to HHV-7 virion tegument phosphoprotein pp85 and to HHV-6B protein p101. The antibodies are specific for HHV-7 and HHV-6B, respectively, and they retained reactivity for antigens contained in formalin-fixed, paraffin-embedded tissue samples. We report that (i) HHV-7 pp85 was present in 9 of 32 AIDS-associated Kaposi sarcomas, and in 1 of 7 classical-sporadic HIV-negative Kaposi sarcomas; (ii) HHV-7 pp85 was detected primarily in cells bearing the CD68 marker characteristic of the monocyte/macrophage lineage present in or surrounding the Kaposi sarcoma lesions; and (iii) in a number of Kaposi sarcoma specimens, tumor-associated CD68+ monocytes/macrophages expressed simultaneously antigens from both HHV-7 and HHV-6B, and therefore appeared to be doubly infected with the two viruses. CD68+ monocytes/macrophages infected with HHV-7 were readily detectable in Kaposi sarcoma, but virtually absent from other normal or pathological tissues that harbor macrophages. Because all of the available data indicate that HHV-7 infects CD4+ T lymphocytes, these results suggest that the environment of the Kaposi sarcoma (i) attracts circulating peripheral lymphocytes and monocytes, triggers the replication of latent viruses, and thereby increases the local concentration of viruses, (ii) renders CD68+ monocytes/macrophages susceptible to infection with HHV-7, and (iii) the combination of both events enables double infections of cells with both HHV-6B and HHV-7.

Multiplex detection of four pathogenic retroviruses using molecular beacons

We describe a multiplex nucleic acid assay that identifies and determines the abundance of four different pathogenic retroviruses (HIV-1, HIV-2, and human T-lymphotrophic virus types I and II). Retroviral DNA sequences are amplified in a single, sealed tube by simultaneous PCR assays, and the resulting amplicons are detected in real time by the hybridization of four differently colored, amplicon-specific molecular beacons. The color of the fluorescence generated in the course of amplification identifies which retroviruses are present, and the number of thermal cycles required for the intensity of each color to rise significantly above background provides an accurate measure of the number of copies of each retroviral sequence that were present originally in the sample. Fewer than 10 retroviral genomes can be detected. Moreover, 10 copies of a rare retrovirus can be detected in the presence of 100,000 copies of an abundant retrovirus. Ninety-six samples can be analyzed in 3 hr on a single plate, and the use of a closed-tube format eliminates crossover contamination. Utilizing previously well characterized clinical samples, we demonstrate that each of the pathogenic retroviruses can be identified correctly and no false positives occur. This assay enables the rapid and reliable screening of donated blood and transplantable tissues.

Methylation-specific PCR: a novel PCR assay for methylation status of CpG islands.

Precise mapping of DNA methylation patterns in CpG islands has become essential for understanding diverse biological processes such as the regulation of imprinted genes, X chromosome inactivation, and tumor suppressor gene silencing in human cancer. We describe a new method, MSP (methylation-specific PCR), which can rapidly assess the methylation status of virtually any group of CpG sites within a CpG island, independent of the use of methylation-sensitive restriction enzymes. This assay entails initial modification of DNA by sodium bisulfite, converting all unmethylated, but not methylated, cytosines to uracil, and subsequent amplification with primers specific for methylated versus unmethylated DNA. MSP requires only small quantities of DNA, is sensitive to 0.1% methylated alleles of a given CpG island locus, and can be performed on DNA extracted from paraffin-embedded samples. MSP eliminates the false positive results inherent to previous PCR-based approaches which relied on differential restriction enzyme cleavage to distinguish methylated from unmethylated DNA. In this study, we demonstrate the use of MSP to identify promoter region hypermethylation changes associated with transcriptional inactivation in four important tumor suppressor genes (p16, p15, E-cadherin, and von Hippel-Lindau) in human cancer.

cAMP compartmentation is responsible for a local activation of cardiac Ca2+ channels by beta-adrenergic agonists.

The role of cAMP subcellular compartmentation in the progress of beta-adrenergic stimulation of cardiac L-type calcium current (ICa) was investigated by using a method based on the use of whole-cell patch-clamp recording and a double capillary for extracellular microperfusion. Frog ventricular cells were sealed at both ends to two patch-clamp pipettes and positioned approximately halfway between the mouths of two capillaries that were separated by a 5-micron thin wall. ICa could be inhibited in one half or the other by omitting Ca2+ from one solution or the other. Exposing half of the cell to a saturating concentration of isoprenaline (ISO, 1 microM) produced a nonmaximal increase in ICa (347 +/- 70%; n = 4) since a subsequent application of ISO to the other part induced an additional effect of nearly similar amplitude to reach a 673 +/- 130% increase. However, half-cell exposure to forskolin (FSK, 30 microM) induced a maximal stimulation of ICa (561 +/- 55%; n = 4). This effect was not the result of adenylyl cyclase activation due to FSK diffusion in the nonexposed part of the cell. To determine the distant effects of ISO and FSK on ICa, the drugs were applied in a zero-Ca solution. Adding Ca2+ to the drug-containing solutions allowed us to record the local effect of the drugs. Dose-response curves for the local and distant effects of ISO and FSK on ICa were used as an index of cAMP concentration changes near the sarcolemma. We found that ISO induced a 40-fold, but FSK induced only a 4-fold, higher cAMP concentration close to the Ca2+ channels, in the part of the cell exposed to the drugs, than it did in the rest of the cell. cAMP compartmentation was greatly reduced after inhibition of phosphodiesterase activity with 3-isobutyl-methylxanthine, suggesting the colocalization of enzymes involved in the cAMP cascade. We conclude that beta-adrenergic receptors are functionally coupled to nearby Ca2+ channels via local elevations of cAMP.

Cyclins as markers of tumor proliferation: immunocytochemical studies in breast cancer.

We have developed methods to use anticyclin A, B, and E antibodies as reagents to specifically detect proliferating cells in specific phases of the cell cycle in formalin-fixed, paraffin-embedded sections of tissues and cells. Staining of 48 archival cases of breast cancer showed that these antibodies estimate the tumor proliferation fraction and therefore are potentially useful for the prediction of prognosis. A subset of cancers had a high frequency of tumor cells expressing cyclins A and E, out of proportion to other proliferation markers, suggesting that these tumors may have deregulated cyclin expression. In addition to recognizing authentic cyclin E in the nucleus of proliferating cells, anticyclin E antibody cross-reacted with a cytoplasmic protein in nonproliferating endothelial cells. This cross-reaction allows the simultaneous visualization and quantitation of microvessels in the tumors, measuring a second potential predictor of breast cancer prognosis, tumor angiogenesis.

Infrared microspectroscopy of inflammatory process and colon tumors.

According to the last global burden of disease published by the World Health Organization, tumors were the third leading cause of death worldwide in 2004. Among the different types of tumors, colorectal cancer ranks as the fourth most lethal. To date, tumor diagnosis is based mainly on the identification of morphological changes in tissues. Considering that these changes appears after many biochemical reactions, the development of vibrational techniques may contribute to the early detection of tumors, since they are able to detect such reactions. The present study aimed to develop a methodology based on infrared microspectroscopy to characterize colon samples, providing complementary information to the pathologist and facilitating the early diagnosis of tumors. The study groups were composed by human colon samples obtained from paraffin-embedded biopsies. The groups are divided in normal (n=20), inflammation (n=17) and tumor (n=18). Two adjacent slices were acquired from each block. The first one was subjected to chemical dewaxing and H&E staining. The infrared imaging was performed on the second slice, which was not dewaxed or stained. A computational preprocessing methodology was employed to identify the paraffin in the images and to perform spectral baseline correction. Such methodology was adapted to include two types of spectral quality control. Afterwards the preprocessing step, spectra belonging to the same image were analyzed and grouped according to their biochemical similarities. One pathologist associated each obtained group with some histological structure based on the H&E stained slice. Such analysis highlighted the biochemical differences between the three studied groups. Results showed that severe inflammation presents biochemical features similar to the tumors ones, indicating that tumors can develop from inflammatory process. A spectral database was constructed containing the biochemical information identified in the previous step. Spectra obtained from new samples were confronted with the database information, leading to their classification into one of the three groups: normal, inflammation or tumor. Internal and external validation were performed based on the classification sensitivity, specificity and accuracy. Comparison between the classification results and H&E stained sections revealed some discrepancies. Some regions histologically normal were identified as inflammation by the classification algorithm. Similarly, some regions presenting inflammatory lesions in the stained section were classified into the tumor group. Such differences were considered as misclassification, but they may actually evidence that biochemical changes are in course in the analyzed sample. In the latter case, the method developed throughout this thesis would have proved able to identify early stages of inflammatory and tumor lesions. It is necessary to perform additional experiments to elucidate this discrepancy between the classification results and the morphological features. One solution would be the use of immunohistochemistry techniques with specific markers for tumor and inflammation. Another option includes the recovering of the medical records of patients who participated in this study in order to check, in later times to the biopsy collection, whether they actually developed the lesions supposedly detected in this research.

Acción colectiva rural, reforma agraria y política en El Ecuador, ca. 1920-1965

This thesis studies the rural collective action processes between 1920 and 1965 in Ecuador with a social history and political sociology approach. An approximation is carried out towards the conflicts, mobilizations and protests where indigenous and not indigenous peasants participated. Because of this, they are considered two periods, the first one that last from 1931 to 1947, sealed by the political instability and a constant change of governments; and the second one between 1948 and 1965, in a phase of successive constitutionally governments that ruled between 1948 and 1960. The conflicts and rural mobilizations reached a major visibility since 1958, deeply affecting the public opinion. The importance and magnitude of the rural mobilizations between 1959 and 1963 generated a controversy on their political effects in the agrarian change. Certainly, the rural mobilizations influenced in the outcome that took the political crisis, which concluded in the implantation of a military government in 1963. This government issued an Agrarian Reform Law in 1964, which modified partially the working relations and the land ownership. And, in addition, it defined a new type of military intervention in the policies that combined repression with reforms. The existence of a landowner social segment that backed a reform in the rural highland (sierra) society has been generally identified by Galo Plaza's figure. In his government (1948-1952), transformations were accentuated in the State intervention, mainly orientated towards the economic and political modernization. This was a new moment of coastal agro-exportation development with the leadership of the banana production. There were stimulated measures of promotion of the production and exportation of bananas. So, the road infrastructure was intensively spread and connected the producing zones with the export ports...

Avaliação da radioatividade natural em tintas de uso comercial no Brasil

A radioatividade natural presente em solos, rochas e materiais de construção, devida ao 40K e às séries radioativas do 232Th e 238U é a principal contribuição à exposição externa aos seres humanos. Neste trabalho, determinou-se as concentrações de atividade de 226Ra (da série do 238U), 232Th e 40K presentes em 50 amostras de tintas látex de cor branca comercializadas no Brasil, especificamente, 15 do tipo econômico, 15 do tipo standard, 20 do tipo premium e em uma amostra de dióxido de titânio. As amostras foram seladas e armazenadas por um período mínimo de 30 dias para se alcançar o equilíbrio radioativo secular nas séries do 238U e do 232Th e medidas pela técnica analítica de espectrometria gama de alta resolução. As concentrações de atividade foram calculadas utilizando-se as médias ponderadas pelas incertezas do 214Pb e 214Bi para o 226Ra e médias ponderadas pelas incertezas do 228Ac, 212Pb e 212Bi para o 232Th. A concentração de atividade do 40K foi determinada pela sua transição única de 1460,8 keV. Fatores de autoatenuação gama foram calculados e utilizados para correção da concentração de atividade das amostras com densidade maior que 1,0 g.cm-3. Os índices radiológicos equivalente em rádio (Raeq), índice de concentração de atividade (Iγ), índice de risco à exposição gama interna (Hin), o índice de risco à exposição gama externa (Hex) e a taxa de dose (D) e dose efetiva anual (Def) foram calculados a partir das concentrações de atividade do 226Ra, 232Th e 40K. As concentrações de atividade de 226Ra das tintas variaram entre valores abaixo da atividade mínima detectável e 38,7 Bq.kg-1, as de 232Th variaram entre valores abaixo da atividade mínima detectável e 101,2 Bq.kg-1 e as de 40K variaram entre valores abaixo da atividade mínima detectável e 256 Bq.kg-1. O Raeq variou entre 1,41 Bq.kg-1 e 203 Bq.kg-1, o Iγ variou entre 0,0047 e 0,720, o Hin variou entre 0,0076 e 0,653 e o Hex variou entre 0,0038 e 0,549. A taxa de dose variou de 0,170 nGy.h-1 a 21,3 nGy.h-1 e a dose efetiva anual variou entre 0,83 μSv.a-1 e 104,2 μSv.a-1. Estes resultados mostram que as concentrações de atividades das tintas utilizadas neste estudo estão abaixo dos limites recomendados por Hassan et al. para Raeq (370 Bq.kg-1), pela Comissão Européia para o Iγ (limite de 2 para materiais superficiais) e pela Organização para Cooperação Econômica e Desenvolvimento para Hin e para Hex (ambos com limite de 1), para todas as 50 amostras estudadas, mostrando assim a segurança destas tintas com relação a proteção radiológica.

Tratamento superficial dos agregados reciclados de RCD com hidrofugantes.

A proposta busca reduzir a absorção de água dos agregados reciclados de Resíduos de Construção e Demolição (RCD), através do tratamento de sua superfície com hidrofugante, de maneira que estes não aumentem o consumo de água tampouco reduzam a resistência mecânica. Os agregados reciclados de RCD foram caracterizados quanto à granulometria, morfologia, porosidade, ângulo de contato aparente, absorção de água, análise de imagem e rugosidade superficial. Em seguida, os mesmos foram tratados superficialmente com dois tipos de hidrofugante: solução de silano e parafina. Todos os tratamentos permitiram reduzir a absorção de água dos agregados reciclados de RCD. O tratamento por imersão foi aquele que permitiu obter os melhores resultados e a menor variabilidade entre as técnicas. Os tratamentos hidrofugam a superfície, apesar da parafina apresentar maior molhabilidade. O tratamento com parafina apresentou, em termos de absorção de água, resultados inferiores e menos variáveis que o silano. Os parâmetros de rugosidade constataram que, ambos os materiais perdem seu perfil topográfico original quando tratados com parafina. Os diferentes agregados reciclados com cada hidrofugante foram aplicados em materiais cimentícios analisados no estado fresco e no estado endurecido. Os tratamentos reduziram a absorção e o consumo de água de mistura, porém afetaram negativamente as propriedades mecânicas, devido nova interface gerada (no caso específica de parafina) e falta de molhabilidade nas superfícies.

The European Resonance of Napoleon’s Defeat in Spain

The military event that sealed the defeat of Napoleon in Spain was the Battle of Vitoria on 21st June 1813, which saw the allied British, Spanish and Portuguese troops led by Wellington gain victory over Joseph Bonaparte's forces. It was the last great battle of what is known in Spain as the Guerra de la Independencia, in the United Kingdom as the Peninsular War and in France as the Guerre d'Espagne. While a sliver of Spanish territory remained under French control and the war itself went on for a few more months, it was the Battle of Vitoria that marked the end of Napoleon's rule on the Iberian Peninsula, as symbolised by the departure from Spain of Joseph Bonaparte, the monarch who had been imposed five years earlier to remove the Bourbons from the Spanish throne.