Pasvik Water Quality Report Environmental Monitoring Programme in the Norwegian, Finnish and Russian Border Area

The Pasvik monitoring programme was created in 2006 as a result of the trilateral cooperation, and with the intention of following changes in the environment under variable pollution levels. Water quality is one of the basic elements of the Programme when assessing the effects of the emissions from the Pechenganikel mining and metallurgical industry (Kola GMK). The Metallurgic Production Renovation Programme was implemented by OJSC Kola GMK to reduce emissions of sulphur and heavy metal concentrated dust. However, the expectations for the reduction in emissions from the smelter in the settlement Nikel were not realized. Nevertheless, Kola GMK has found that the modernization programme’s measures do not provide the planned reductions of sulfur dioxide emissions. In this report, temporal trends in water chemistry during 2000–2009 are examined on the basis of the data gathered from Lake Inari, River Pasvik and directly connected lakes, as well as from 26 small lakes in three areas: Pechenganikel (Russia), Jarfjord (Norway) and Vätsäri (Finland). The lower parts of the Pasvik watercourse are impacted by both atmospheric pollution and direct wastewater discharge from the Pechenganikel smelter and the settlement of Nikel. The upper section of the watercourse, and the small lakes and streams which are not directly linked to the Pasvik watercourse, only receive atmospheric pollution. The data obtained confirms the ongoing pollution of the river and water system. Copper (Cu), nickel (Ni) and sulphates are the main pollution components. The highest levels were observed close to the smelters. The most polluted water source of the basin is the River Kolosjoki, as it directly receives the sewage discharge from the smelters and the stream connecting the Lakes Salmijarvi and Kuetsjarvi. The concentrations of metals and sulphates in the River Pasvik are higher downstream from the Kuetsjarvi Lake. There has been no fall in the concentrations of pollutants in Pasvik watercourse over the last 10 years. Ongoing recovery from acidification has been evident in the small lakes of the Jarfjord and Vätsäri areas during the 2000s. The buffering capacity of these lakes has improved and the pH has increased. The reason for this recovery is that sulphate deposition has decreased, which is also evident in the water quality. However, concentrations of some metals, especially Ni and Cu, have risen during the 2000s. Ni concentrations have increased in all three areas, and Cu concentrations in the Pechenganickel and Jarfjord areas, which are located closer to the smelters. Emission levels of Ni and Cu did not fall during 2000s. In fact, the emission levels of Ni compounds even increased compared to the 1990s.

Täyteainepitoisuuden ja retentioainesysteemin optimointi

Työssä tutkittiin tarrapaperikoneen pohjapaperin täyteainepitoisuuden nostamisen vaikutusta koneen ajettavuuteen ja paperin ominaisuuksiin. Työn tavoitteena oli löytää ne prosessitekniset keinot, joilla voitaisiin saavuttaa raskaiden pintapapereiden tavoitetuhkatasot. Lisäksi pyrittiin optimoimaan retentioaineiden annokset ja ajotavat korkeilla tuhkatasoilla. Kirjallisuusosassa tarkasteltiin pinta- ja kolloidikemian perusteita sekä täyteainepitoisuuden vaikutusta paperin ominaisuuksiin ja prosessoitavuuteen. Lisäk-si syvennyttiin märänpään kemiaan selvittämällä mm. kalsiumkarbonaatin vesiliuoskemiaa ja erilaisten retentioaineiden ominaisuuksia ja niiden reaktiomekanismeja. Työn kokeellinen osa koostui kahdesta koeajosta. Ensimmäisessä koeajossa selvitettiin täyteainesaostumien muodostumismekanismeja ja paperikoneen ajettavuutta täyteainepitoisuutta nostettaessa yli raskaiden pintapapereiden tavoitetasojen. Saadut tulokset osoittivat, että märänpään kemiantila pysyi koeajon aikana muuttumattomana eikä mitään saostumien muodostumista havaittu. Täyteainepitoisuudessa päästiin 3 % yli lajikohtaisen tuhkatavoitteen ilman ajettavuusongelmia. Toisessa koeajossa keskityttiin erityisesti märänpään retentioaineiden määrien optimointiin ja paperin laatuominaisuuksiin. Koeajossa täyteainepitoisuutta nostettiin yli tavoitetasojen. Saadut tulokset osoittivat, että täyteainepitoisuuden nostolla ei ollut vaikutusta paperin laatuun tai paperikoneen ajettavuuteen. Massatärkkelyksen avulla pystyttiin korvaamaan kationisen polymeerin retentiovaste ja kompensoimaan täyteainepitoisuuden noston myötä tullut paperin lujuuksien lasku. Koeajoissa ja prosessin seurannassa tuli ilmi myös useita eri tekijöitä, joilla oli vaikutusta retentioon, retentioaineiden tehoon ja prosessin stabiilisuuteen. Tehdyistä yksittäisistä havainnoista on hyötyä pyrittäessä ymmärtämään märänpään prosessin tilaa ja sen vaikutusta paperikoneen ajettavuuteen. Työ saavutti sille asetetut tavoitteet ja sen ansiosta paperikoneen märänpään raaka-aineiden ja kemikaalien syöttösuhteita pystyttiin muuttamaan tavalla, joka vähensi paperinvalmistuksen kustannuksia ilman että paperin laatuominaisuudet huononivat.

Varastonhallinnan ja tuotannonsuunnittelun kehittäminen paperitehdasympäristössä

Tämän diplomityön tavoitteena on kehittää erään paperitehtaan käyttöpääoman hallintaa tuotannonsuunnittelun ja varastonhallinnan keinoin. Tuotannonsuunnittelussa tutkitaan syklinpituuden vaikutusta lajinvaihtohylkyyn ja siitä aiheutuvan varastotason nousun hyötyjä ja haittoja. Tehtaan ylijäämätasot määritetään puolen vuoden aikajänteeltä ja pyritään löytämään kehitysehdotuksia niiden minimoimiseksi. Työssä keskitytään lisäksi satamasta palautettuihin rulliin ja haamurulliin. Työn aiheista tehdään nykytila-analyysit, joiden perusteella selvitetään kehityskohteet. Työssä hyödynnetään tehtaan omia tietojärjestelmiä osa-alueiden analysoimisessa. Analysoimisessa käytetään karkeasuunnitelmaa ja erilaisia raportteja varastoihin ja tuotantoon liittyen. Työn tulosten mukaan voidaan todeta, että syklinpituutta ei kannata varasto-ohjautuvalla tuotantomuodolla kasvattaa. Ylijäämiä syntyy paperiteollisuudessa vääjäämättä ja kyseisessä yrityksessä niiden hyödyntämisprosentit ovat varsin korkealla tasolla. Kokonaisuutena tehtaan käyttöpääoman hallinta on varsin hyvällä pohjalla eikä suuria toimintatapamuutoksia ole tarpeen tehdä. Satamapalautusongelman suuruudesta tehtaalla oli erilainen käsitys kuin asia todellisuudessaan oli. Työssä esitetään kehitysehdotuksia, joiden avulla ongelmaa voidaan edelleen pienentää ja saavuttaa konkreettisia säästöjä. Haamurullien määrä osoittautui minimaaliseksi.

Oxidation rates of carbon and nitrogen in char residues from solid fuels

Computational fluid dynamics (CFD) modeling is an important tool in designing new combustion systems. By using CFD modeling, entire combustion systems can be modeled and the emissions and the performance can be predicted. CFD modeling can also be used to develop new and better combustion systems from an economical and environmental point of view. In CFD modeling of solid fuel combustion, the combustible fuel is generally treated as single fuel particles. One of the limitations with the CFD modeling concerns the sub-models describing the combustion of single fuel particles. Available models in the scientific literature are in many cases not suitable as submodels for CFD modeling since they depend on a large number of input parameters and are computationally heavy. In this thesis CFD-applicable models are developed for the combustion of single fuel particles. The single particle models can be used to improve the combustion performance in various combustion devices or develop completely new technologies. The investigated fields are oxidation of carbon (C) and nitrogen (N) in char residues from solid fuels. Modeled char-C oxidation rates are compared to experimental oxidation rates for a large number of pulverized solid fuel chars under relevant combustion conditions. The experiments have been performed in an isothermal plug flow reactor operating at 1123-1673 K and 3-15 vol.% O2. In the single particle model, the char oxidation is based on apparent kinetics and depends on three fuel specific parameters: apparent pre-exponential factor, apparent activation energy, and apparent reaction order. The single particle model can be incorporated as a sub-model into a CFD code. The results show that the modeled char oxidation rates are in good agreement with experimental char oxidation rates up to around 70% of burnout. Moreover, the results show that the activation energy and the reaction order can be assumed to be constant for a large number of bituminous coal chars under conditions limited by the combined effects of chemical kinetics and pore diffusion. Based on this, a new model based on only one fuel specific parameter is developed (Paper III). The results also show that reaction orders of bituminous coal chars and anthracite chars differ under similar conditions (Paper I and Paper II); reaction orders of bituminous coal chars were found to be one, while reaction orders of anthracite chars were determined to be zero. This difference in reaction orders has not previously been observed in the literature and should be considered in future char oxidation models. One of the most frequently used comprehensive char oxidation models could not explain the difference in the reaction orders. In the thesis (Paper II), a modification to the model is suggested in order to explain the difference in reaction orders between anthracite chars and bituminous coal chars. Two single particle models are also developed for the NO formation and reduction during the oxidation of single biomass char particles. In the models the char-N is assumed to be oxidized to NO and the NO is partly reduced inside the particle. The first model (Paper IV) is based on the concentration gradients of NO inside and outside the particle and the second model is simplified to such an extent that it is based on apparent kinetics and can be incorporated as a sub-model into a CFD code (Paper V). Modeled NO release rates from both models were in good agreement with experimental measurements from a single particle reactor of quartz glass operating at 1173-1323 K and 3-19 vol.% O2. In the future, the models can be used to reduce NO emissions in new combustion systems.

Analysis of corporate social responsibility (CSR) performance and financial performance of selected mining companies

The global concern about sustainability has been growing and the mining industry is questioned about its environmental and social performance. Corporate social responsibility (CSR) is an important issue for the extractive industries. The main objective of this study was to investigate the relationship between CSR performance and financial performance of selected mining companies. The study was conducted by identifying and comparing a selection of available CSR performance indicators with financial performance indicators. Based on the result of the study, the relationship between CSR performance and financial performance is unclear for the selected group of companies. The result is mixed and no industry specific realistic way to measure CSR performance uniformly is available. The result as a whole is contradictory and varies at company level as well as based on the selected indicators. The result of this study confirms that the relationship between CSR performance and financial performance is complicated and difficult to determine. As an outcome, evaluation of benefits of CSR in the mining sector could better be analyzed based on different attributes.

Wet oxidation of biomass for chemical production

Tämän kandidaatintyön tarkoituksena oli tutkia märkähapetusprosessia jätevesien käsittely-menetelmänä ja mahdollisena menetelmänä kemikaalien tuottamiseksi jätevesistä. Erityishuomio on kiinnitetty paperiteollisuudessa syntyviin jätevesiin. Teoriaosassa käsitellään vesikiertoja paperitehtaassa, paperitehtaalla syntyvän jäteveden ominaisuuksia sekä itse märkähapetusprosessia. Märkähapetusprosessissa perehdytään tavalliseen happea käyttävään märkähapetukseen sekä vetyperoksidia käyttävään menetelmään sekä näissä prosesseissa syntyviin väli- ja lopputuotteisiin. Märkähapetus (WO) on terminen hapetusmenetelmä, jolla voidaan käsitellä jätevesiä, jotka ovat liian konsentroituja biologisiin käsittelyihin tai jotka ovat huonosti biohajoavia. Märkähapetuksen tarkoituksena on parantaa molekulaarisen hapen ja orgaanisen aineen välistä kontaktia, jolloin orgaaninen aines pilkkoutuu muodostaen pääasiassa karboksyylihappoja, aldehydejä, hiilidioksidia ja vettä. Märkähapetuksessa hapettavana kaasuna voidaan käyttää joko puhdasta happea tai ilmaa. Vetyperoksidia käyttävässä märkähapetuksessa (WPO) hapettava kaasu on korvattu nestemäisellä vetyperoksidilla. Kokeellisessa osassa tutkittiin orgaanisen aineksen hapetusta käyttäen Fentonin reagenssia, jolloin katalyyttina reaktiossa toimii rautaionit (Fe2+ ja Fe3+) ja hapettimena vetyperoksidi. Hapetettavana jätevetenä käytettiin paperitehtaan hiomolta saatua kiertovettä, TMP-vettä. Hapetuskokeita tehtiin eri vetyperoksidin annoksilla ja katalyytin määrillä eri lämpötiloissa. Hapetuksen jälkeen näytteistä mitattiin kemiallinen hapenkulutus (COD), orgaanisen hiilen kokonaismäärä (TOC) sekä pH. Lisäksi näytteistä määritettiin nestekromatografilla (HPLC) tyypillisten välituotteiden, kuten oksaalihapon, muurahaishapon ja etikkahapon, määrät. Tehdyissä kokeissa COD-arvoja saatiin pienennettyä 50-88 % siten, että suodatetuissa näytteissä muutos oli suurempi kuin suodattamattomissa näytteissä. Lisäksi TOC-arvot laskivat 28-58 %. Tehdyissä kokeissa saatiin myös tuotettua välituotteina karboksyylihappoja, joista etikkahappoa ja oksaalihappoa tuotettiin suurimmat määrät. Myös muurahaishappoa ja meripihkahappoa saatiin tuotettua.

Social networks and networking facilitating internationalization: Experiences of two Finnish fashion companies

Background: Fashion is a dynamic and creative industry where larger retailers are enjoying international success. Small businesses however are struggling in the face of international expansion, as they lack the necessary resources and managerial know-how. The Finnish fashion industry has neither been able to develop the industry environment to support small and micro firms nor has Finland relevant finance or public domains, such as, seen in other Nordic countries. Networking has been recognized to facilitate organizational growth and international expansion in industries such as manufacturing and high technology. It has enabled smaller companies to gain resources, knowledge and experiences otherwise unattainable. Objective: The purpose of this study was to explore how networking has been utilized in the Finnish fashion industry. Particularly social relationships and networks are examined, as they emphasize the importance of individuals. Exploration on the past actions should also provide insight how networks and networking could be utilized and developed in the future. Main findings: It was discovered that the Finnish fashion industry (social) network is rather dense. This was mainly due to the small size of the Finnish market. In the early years of the establishment of the company, close contacts seemed to be utilized. As a company expands and extends its business, the relationships tended to move towards more utilitarian in nature. However, in some cases, the long term relationships had also affectionate features, such as trust and commitment. International networking was found to have positive impact on business opportunities. Participation to events, such as trade shows, was perceived as one of the best ways to meet new international contacts and to develop ones network. Active networking in the Finnish market, however, created both domestic and international opportunities. Furthermore, cooperation and open communication were discovered to facilitate innovation and projects. The public sector seemed to lack the interest in supporting the fashion industry according to the interviewees. The major issues for the fashion industry still concerned, among others, funding, administrative guidance and public support for developing the industry as a whole.

Managing innovation in oil and gas companies: A proposed framework for the management of innovation at Ecopetrol S.A.

Actually, the term innovation seems to be one of the most used in any kind of business practices. However, in order to get value from it, companies need to define a systematic and structured way to manage innovation. This process can be difficult and very risky since it is associated with the development of firm´s capabilities which involves human and technical challenges according to the context of a firm. Additionally, it seems not to exist a magic formula to manage innovation and what may work in a company may not work in another, even though in the same type of industry. In this sense, the purpose of this research is to identify how the oil and gas companies can manage innovation and what are the main elements, their interrelations and structure, required for managing innovation effectively in this critical sector for the world economy. The study follows a holistic single case study in a National Oil Company (NOC) of a developing country to explore how innovation performs in the industry, what are the main elements regarding innovation management and their interactions according to the nature of the industry. Contributory literature and qualitative data from the case study company (with the use of non-standardized interviews) is collected and analyzed. The research confirms the relevance and importance of the definition and implementation of an innovation framework in order to ensure the generation of value and organize as well as guide the efforts in innovation done by a firm. In this way based on the theoretical background, research´s findings, and in the company´s innovation environment and conditions, a framework for managing innovation at the case study company is suggested. This study is one of the few, if not only one, that has reviewed the way as oil and gas companies manage innovation and its practical implementation in a company from a developing country. Both researchers and practitioners will get a photograph of understanding innovation management in the oil and gas industry and its growing necessity in the business world. Some issues have been highlighted, so that future study can be focused in those directions. In fact, even though research on innovation management has significantly grown, there are still many issues that need to be addressed to get insight about managing innovation in various contexts and industries. Studies are mostly performed in the context of large firms and in developed countries, so then research in the context of developing countries is still almost an untouched area, especially in the oil and gas industry. Finally, from the research it seems crucial to explore the effect of some innovation-related variables such as: open innovation in third world economies and in state-own companies; the impact of mergers and acquisitions in innovation performance in oil and gas companies; value measurement in the first stages of the innovation process; and, development of innovation capabilities in companies from developing nations.

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

Networks and partnerships in third party logistics service production

Third party logistics, and third party logistics providers and the services they offer have grown substantially in the last twenty years. Even though there has been extensive research on third party logistics providers, and regular industry reviews within the logistics industry, a closer research in the area of partner selection and network models in the third party logistics industry is missing. The perspective taken in this study was of expanding the network research into logistics service providers as the focal firm in the network. The purpose of the study is to analyze partnerships and networks in the third party logistics industry in order to define how networks are utilized in third party logistics markets, what have been the reasons for the partnerships, and whether there are benefits for the third party logistics provider that can be achieved through building networks and partnerships. The theoretical framework of this study was formed based on common theories in studying networks and partnerships in accordance with models of horizontal and vertical partnerships. The theories applied to the framework and context of this study included the strategic network view and the resource-based view. Applying these two network theories to the position and networks of third party logistics providers in an industrial supply chain, a theoretical model for analyzing the horizontal and vertical partnerships where the TPL provider is in focus was structured. The empirical analysis of TPL partnerships consisted of a qualitative document analysis of 33 partnership examples involving companies present in the Finnish TPL markets. For the research, existing documents providing secondary data on types of partnerships, reasons for the partnerships, and outcomes of the partnerships were searched from available online sources. Findings of the study revealed that third party logistics providers are evident in horizontal and vertical interactions varying in geographical coverage and the depth and nature of the relationship. Partnership decisions were found to be made on resource based reasons, as well as from strategic aspects. The discovered results of the partnerships in this study included cost reduction and effectiveness in the partnerships for improving existing services. In addition in partnerships created for innovative service extension, differentiation, and creation of additional value were discovered to have emerged as results of the cooperation. It can be concluded that benefits and competitive advantage can be created through building partnerships in order to expand service offering and seeking synergies.

Hydrolysis of xylans by enzyme systems from solid cultures of Trichoderma harzianum strains

Xylanase activity was isolated from crude extracts of Trichoderma harzianum strains C and 4 grown at 28oC in a solid medium containing wheat bran as the carbon source. Enzyme activity was demonstrable in the permeate after ultrafiltration of the crude extracts using an Amicon system. The hydrolysis patterns of different xylans and paper pulps by xylanase activity ranged from xylose, xylobiose and xylotriose to higher xylooligosaccharides. A purified ß-xylosidase from the Trichoderma harzianum strain released xylose, xylobiose and xylotriose from seaweed, deacetylated, oat spelt and birchwood xylans. The purified enzyme was not active against acetylated xylan and catalyzed the hydrolysis of xylooligosaccharides, including xylotriose, xylotetraose and xylopentaose. However, the enzyme was not able to degrade xylohexaose. Xylanase pretreatment was effective for hardwood kraft pulp bleaching. Hardwood kraft pulp bleached in the XEOP sequence had its kappa number reduced from 13.2 to 8.9 and a viscosity of 20.45 cp. The efficiency of delignification was 33%.

Pressforming of a tray from a pulp sheet

The aim of this thesis work was to verify the possibility to produce tray packages directly from pulp sheets using press forming techniques. The different existing raw materials of pulp, various sources of molded pulp and different methods of production of molded pulp were studied. Nine different raw materials which were used for experimental work were provided by Stora Enso mills, and Stora Enso Research Centre, Imatra, Finland. The laboratory tests were carried out using LUT Adjustable packaging line at Lappeenranta University of Technology. The results prove that long virgin fibres of pine pulp seems to have better formability with high moisture content compared to others. No significant improvements were noticed with conditioned samples, never the less far studies has to be done to find optimal conditions for production. The results indicated the possibility for making pressformed tray from two different pulp qualities (Sunila pulp and Enopine). The method could prove to be beneficiary as the production line could be shortened and investment in board machines could be avoided if the trays were pressed directly from pulp sheets. Also the labour costs would be reduced. However, there is much work to be done before the quality of a tray produced out of a pulp sheet is comparable to a tray produced out of tray board.

Pohjapaperin kustannusrakenteen optimointi

Kilpailulliset tekijät ovat johtaneet paperin valmistajat miettimään keinoja valmistuskustannusten leikkaamiseksi. Yksi keino on optimoida raaka-aineiden käyttöä, jota on tehty tässä diplomityössä. Työn tarkoitus on selvittää koeajoin mahdollisuudet kalliimpien raaka-aineiden korvaamiseen edullisemmilla, säilyttäen kuitenkin pohjapaperin laadulliset ominaisuudet. Työ on toteutettu UPM Kymmene Oyj:n Jokilaakson tehtailla, Jämsänkosken paperitehtaan Tarrapaperit-osastolla. Työssä on käytetty apuna tietokoneohjelmia mallintamaan ja simuloimaan paperissa ja paperin kustannusrakenteessa tapahtuvia muutoksia, mutta merkittävimmässä asemassa ovat olleet koeajot ja erilaisten näytteiden käsittely. Raaka-aineina käytettävien massojen osuuksien optimoinnilla on saatu aikaiseksi merkittäviä kustannussäästöjä, mutta työn yhteydessä on löydetty myös keinoja säästöjen saavuttamiseksi energiankulutusta järkevöittämällä. Luotu malli auttaa jatkossa kustannusrakenteen seurannassa. Mäntysellun osuuden laskulla ja täyteaineen osuuden nostolla saavutetaan merkittävimmät kustannussäästöt, kemihierteellä vaikutus kustannuksiin on vähäisempi. Sähköenergiaa vievä kuitujen jauhatus on järjestetty paperikone 3:lla uudella tavalla, jolla on paitsi saavutettu säästöä energiassa, parannettu myös paperin lujuutta.

Surface studies of limestones and dolostones : characterisation using various techniques and batch dissolution experiments with hydrochloric acid solutions

In this thesis, stepwise titration with hydrochloric acid was used to obtain chemical reactivities and dissolution rates of ground limestones and dolostones of varying geological backgrounds (sedimentary, metamorphic or magmatic). Two different ways of conducting the calculations were used: 1) a first order mathematical model was used to calculate extrapolated initial reactivities (and dissolution rates) at pH 4, and 2) a second order mathematical model was used to acquire integrated mean specific chemical reaction constants (and dissolution rates) at pH 5. The calculations of the reactivities and dissolution rates were based on rate of change of pH and particle size distributions of the sample powders obtained by laser diffraction. The initial dissolution rates at pH 4 were repeatedly higher than previously reported literature values, whereas the dissolution rates at pH 5 were consistent with former observations. Reactivities and dissolution rates varied substantially for dolostones, whereas for limestones and calcareous rocks, the variation can be primarily explained by relatively large sample standard deviations. A list of the dolostone samples in a decreasing order of initial reactivity at pH 4 is: 1) metamorphic dolostones with calcite/dolomite ratio higher than about 6% 2) sedimentary dolostones without calcite 3) metamorphic dolostones with calcite/dolomite ratio lower than about 6% The reactivities and dissolution rates were accompanied by a wide range of experimental techniques to characterise the samples, to reveal how different rocks changed during the dissolution process, and to find out which factors had an influence on their chemical reactivities. An emphasis was put on chemical and morphological changes taking place at the surfaces of the particles via X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Supporting chemical information was obtained with X-Ray Fluorescence (XRF) measurements of the samples, and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) measurements of the solutions used in the reactivity experiments. Information on mineral (modal) compositions and their occurrence was provided by X-Ray Diffraction (XRD), Energy Dispersive X-ray analysis (EDX) and studying thin sections with a petrographic microscope. BET (Brunauer, Emmet, Teller) surface areas were determined from nitrogen physisorption data. Factors increasing chemical reactivity of dolostones and calcareous rocks were found to be sedimentary origin, higher calcite concentration and smaller quartz concentration. Also, it is assumed that finer grain size and larger BET surface areas increase the reactivity although no certain correlation was found in this thesis. Atomic concentrations did not correlate with the reactivities. Sedimentary dolostones, unlike metamorphic ones, were found to have porous surface structures after dissolution. In addition, conventional (XPS) and synchrotron based (HRXPS) X-ray Photoelectron Spectroscopy were used to study bonding environments on calcite and dolomite surfaces. Both samples are insulators, which is why neutralisation measures such as electron flood gun and a conductive mask were used. Surface core level shifts of 0.7 ± 0.1 eV for Ca 2p spectrum of calcite and 0.75 ± 0.05 eV for Mg 2p and Ca 3s spectra of dolomite were obtained. Some satellite features of Ca 2p, C 1s and O 1s spectra have been suggested to be bulk plasmons. The origin of carbide bonds was suggested to be beam assisted interaction with hydrocarbons found on the surface. The results presented in this thesis are of particular importance for choosing raw materials for wet Flue Gas Desulphurisation (FGD) and construction industry. Wet FGD benefits from high reactivity, whereas construction industry can take advantage of slow reactivity of carbonate rocks often used in the facades of fine buildings. Information on chemical bonding environments may help to create more accurate models for water-rock interactions of carbonates.

Paperitehtaan toimitusketjun kustannus- ja pääoma-analyysi

Heikkenevä kysyntä sekä koveneva hintakilpailu erityisesti painopaperin markkinoilla on luonut paperinvalmistajalle haasteita kustannusten alentamisen sekä kannattavuuden parantamisen osalta. Sijaintinsa vuoksi yritys on halunnut erityisesti parantaa kustannustehokkuuttaan logistiikan osalta, minkä tueksi tämä diplomityö on tehty. Tutkimuksen tarkoituksena on analysoida paperitehtaan toimitusketjuja kustannusjohtamisen näkökulmasta. Tavoitteena on ollut arvioida kahden vaihtoehtoisen toimitusketjun, suoran ja välivarasto-toimituksen, vaikutusta syntyvien kustannusten, ketjuun sitoutuneen pääoman sekä asiakaskannattavuuden kautta. Tutkimus toteutettiin case-tutkimuksen kaltaisena soveltuvin osin, hyödyntämällä kvantitatiivisia menetelmiä. Projektia varten valittiin paperinvalmistajan painopaperin tuloslinjalta kymmenen kohdeasiakasta, joille vaihtoehtoisia toimitusketjuja voidaan soveltaa. Toimitusketjut rajattiin käsittämään valmiin tuotteen asiakastoimitukset ja niistä aiheutuvat kuluerät. Kustannus- ja pääoma-analyysin suunnittelussa hyödynnettiin toimitusketjuihin sekä kustannusjohtamiseen liittyvää teoreettista kirjallisuutta. Ensisijaisena viitekehyksenä kustannusten analysoinnissa sovellettiin toimintolaskentaa ja pääoman sitoutumisen arvioinnissa kiertoajan tunnuslukuja. Käsiteltävä informaatio kerättiin yrityksen sisäisistä raporteista sekä toiminnanohjausjärjestelmästä taulukkolaskentaohjelmaan, jossa laskelmat tehtiin. Tutkimuksen avaintuloksena kahdeksan case-asiakkaan kohdalla suora toimitus osoittautui kustannuksiltaan välivaraston kautta kulkevaa edullisemmaksi. Lisäksi havaittiin suoran toimituksen nopeuttavan teoriassa pääoman kiertoa toimitusketjussa lyhyemmän läpimenoajan ansiosta. Johtopäätöksenä kustannus- ja pääomahyötyjen vaikutuksen vuoksi suorien toimitusten hyödyntäminen on edullista soveltuvien asiakkaiden kohdalla. Tutkimuksessa kustannusinformaation kerääminen kokonaisvaltaisesti osoittautui haasteelliseksi, sillä kaikkien toimitusketjun kustannuserien tietoja ei ollut laajasti saatavilla. Toimeksiantajan näkökulmasta merkittävät kohteet jatkotutkimukselle ovat kustannusten oikeellisuuteen ja kohdistamiseen sekä asiakkaiden maksukäytäntöihin ja ehtoihin liittyvä seuranta.