Shrinking shrinkage:How and why is fruit shrinkage being caused in Sonaemc's convenience stores? Finding opportunities of improvement envisioning its optimization

This work project regards a challenge presented by a Portuguese organization on the retail sector, SONAEMC, which is a case study of how and why fruit shrinkage occurs in the fruit supply chain within their convenience stores. A qualitative research methodology enabled to infer in which stages throughout the chain shrinkage’s causes occur and, to conclude that internal rules for procedures and processes are not always followed and whose compliance would be enough to reduce fruit shrinkage. The key conclusion is that if fruit stock loss is reduced by as much as 15% the category’s profitability could increase about 8%.

Injuries caused by aquatic animals in Brazil: an analysis of the data present in the information system for notifiable diseases

AbstractINTRODUCTION:We present a review of injuries in humans caused by aquatic animals in Brazil using the Information System for Notifiable Diseases [ Sistema de Informação de Agravos de Notificação (SINAN)] database.METHODS:A descriptive and retrospective epidemiological study was conducted from 2007 to 2013.RESULTS:A total of 4,118 accidents were recorded. Of these accidents, 88.7% (3,651) were caused by venomous species, and 11.3% (467) were caused by poisonous, traumatic or unidentified aquatic animals. Most of the events were injuries by stingrays (69%) and jellyfish (13.1%). The North region was responsible for the majority of reports (66.2%), with a significant emphasis on accidents caused by freshwater stingrays (92.2% or 2,317 cases). In the South region, the region with the second highest number of records (15.7%), jellyfish caused the majority of accidents (83.7% or 452 cases). The Northeastern region, with 12.5% of the records, was notable because almost all accidents were caused by toadfish (95.6% or 174 cases).CONCLUSIONS:Although a comparison of different databases has not been performed, the data presented in this study, compared to local and regional surveys, raises the hypothesis of underreporting of accidents. As the SINAN is the official system for the notification of accidents by venomous animals in Brazil, it is imperative that its operation be reviewed and improved, given that effective measures to prevent accidents by venomous animals depend on a reliable database and the ability to accurately report the true conditions.

Description of continuous data using bar graphs: a misleading approach

INTRODUCTION:With the ease provided by current computational programs, medical and scientific journals use bar graphs to describe continuous data.METHODS:This manuscript discusses the inadequacy of bars graphs to present continuous data.RESULTS:Simulated data show that box plots and dot plots are more-feasible tools to describe continuous data.CONCLUSIONS:These plots are preferred to represent continuous variables since they effectively describe the range, shape, and variability of observations and clearly identify outliers. By contrast, bar graphs address only measures of central tendency. Bar graphs should be used only to describe qualitative data.

Malaria epidemiology in the State of Piauí, Northeastern Brazil: a retrospective study with secondary data

Abstract: INTRODUCTION Malaria is not considered endemic in State of Piauí. METHODS Malaria epidemiology was examined using surveillance data. RESULTS: During 2002-2013, of the 484 cases of malaria, 217 were classified as probably acquired in Piauí, most frequently in the Campo Largo, Buriti dos Lopes, and Luzilândia municipalities, and 267 were considered probably imported, from the States of Pará, Maranhão, Amazonas, Roraima, and Rondônia. Probably-imported cases occurred throughout the year, while 80.2% of the probably-acquired cases occurred in April-August, peaking at the end of the rainy season. CONCLUSIONS Malaria surveillance should be intensified. Further ecoepidemiological and entomological studies are needed.

Pressure sores among malnourished necropsied adults - preliminary data

Pressure sores are common among bedridden, elderly, or malnourished patients, and may occur in terminal ill patients because of impaired mobility, fecal or urinary incontinence, and decreased healing capacity. The aim of this study was to compare frequency of pressure sores between malnourished and non-malnourished necropsied adults. METHOD: All (n = 201) adults (age ³ 18 years) autopsied between 1986 and 1996 at the Teaching Hospital of Triangulo Mineiro Medical School (Uberaba) were eligible for the study. Gender, race, weight, height and main diagnoses were recorded. Ninety-six cases were excluded because of probable body water retention (congestive heart failure, hepatic insufficiency, nephrotic syndrome) or pressure sores secondary to peripheral vascular ischemia. Body mass index (BMI) was used to define malnourished (BMI < 18.5 kg/m²) and non-malnourished (BMI > 18.5kg/m²) groups. RESULTS: Except for weight (42.5kg; range: 28-57 vs. 60; 36-134.5kg) and BMI (16.9; range: 12.4-18.5 vs. 22.7; range: 18.5-54.6kg/m²), respectively, there were no statistical differences among 43 malnourished and 62 non-malnourished cases in relation to age (54.9 ± 20.4 vs. 52.9 ± 17.9 years), percentage of white persons (74.4 vs. 64.5%), male gender (76.7 vs. 69.3%) and main diagnoses. Five malnourished (11.6%) and 7 (11.5%) non-malnourished cases had pressure sores (p=0.89). CONCLUSION: Pressure sores were equally common findings in necropsied persons with protein-energy malnutrition, as assessed by body mass index.

Risk of employing an evolvable production system

Nowadays manufacturing companies are facing a more challenging environment due to the unpredictability of the markets in order to survive. Enterprises need to keep innovating and deliver products with new internal or external characteristics. There are strategies and solutions, to different organisational level from strategic to operational, when technology is growing faster in operational level, more specifically in manufacturing system. This means that companies have to deal with the changes of the emergent manufacturing systems while it can be expensive and not easy to be implement. An agile manufacturing system can help to cope with the markets changeability. Evolvable Production Systems (EPS) is an emergent paradigm which aims to bring new solutions to deal with changeability. The proposed paradigm is characterised by modularity and intends to introduce high flexibility and dynamism at shop floor level through the use of the evolution of new computational devices and technology. This new approach brings to enterprises the ability to plug and unplug new devices and allowing fast reformulation of the production line without reprogramming. There is no doubt about the advantages and benefits of this emerging technology but the feasibility and applicability is still under questioned. Most researches in this area are focused on technical side, explaining the advantages of those systems while there are no sufficient works discussing the implementation risks from different perspective, including business owner. The main objective of this work is to propose a methodology and model to identify, classify and measure potential risk associated with an implementation of this emergent paradigm. To quantify the proposed comprehensive risk model, an Intelligent Decision system is developed employing Fuzzy Inference System to deal with the knowledge of experts, as there are no historical data and sufficient research on this area. The result can be the vulnerability assessment of implementing EPS technology in manufacturing companies when the focus is more on SMEs. The present dissertation used the experts’ knowledge and experiences, who were involved in FP7 project IDEAS, which is one of the leading projects in this area.

Building 3D City Models: Testing and Comparing Laser Scanning and Low-Cost UAV Data Using FOSS Technologies

Contém resumo

Comuns: An Open-Data Provider, Explorer and Analytic Toolbox Based on FOSS

Contém resumo

Premature thelarche: identification of clinical and laboratory data for the diagnosis of precocious puberty

PURPOSE: Two groups of girls with premature breast development were studied retrospectively. We tried to identify clinical, radiological, and hormonal parameters that could distinguish between a benign, nonprogressive premature thelarche and a true precocious puberty. METHODS: The clinical outcome of 88 girls with breast enlargement before 6.1 years of age was analyzed. Taking into account the progression of their sexual maturation, we allocated the children into 2 groups: "Isolated Premature Thelarche" (n = 63) and "Precocious Puberty" (n = 25) groups. Chronological and bone ages, height and growth velocity centiles, computerized tomography of hypothalamus-pituitary area, pelvic ultrasonography, gonadotropin response to luteinizing hormone-releasing hormone stimulation as well as basal levels of luteinizing hormone, follicle-stimulating hormone, estradiol, and prolactin were studied in both groups. Statistical analysis were performed using the Student t test to compare the sample means. Fisher's exact test and chi² test were used to analyze the nonparametric variables. RESULTS: Isolated premature thelarche most frequently affected girls younger than 2 years who presented exaggerated follicle-stimulating hormone response to luteinizing hormone-releasing hormone stimulation test. The precocious puberty group had higher initial stature, accelerated growth rate and bone age, increased uterine and ovarian volumes, high spontaneous luteinizing hormone levels by immunofluorimetric assay, as well as a high luteinizing hormone response and peak luteinizing hormone/follicle-stimulating hormone ratio after luteinizing hormone-releasing hormone stimulation. CONCLUSION: At initial presentation, girls who undergo true precocious puberty present advanced bone age, increased uterine and ovarian volumes in addition to breast enlargement, as well as an luteinizing hormone-predominant response after a luteinizing hormone-releasing hormone stimulation test.

Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

Análise da eficiência na gestão do risco de fornecedores: aplicação de um modelo Data Envelopment Analysis

Atualmente a tendência dos negócios leva a cadeias de abastecimento complexas e dinâmicas, que consequentemente levanta questões relativas ao aumento do risco de fornecimento em torno dessas mesmas cadeias; pelo que existe cada vez mais uma necessidade dos gestores identificarem e gerirem o risco de um modo mais diversificado. Associado às cadeias de abastecimento estão os fornecedores. A maioria dos riscos relativos a estes, está incluída no contexto de risco de fornecimento, resultando assim numa problemática de seleção e avaliação de fornecedores. Riscos como baixa qualidade, atrasos na entrega, falha ou interrupção de fornecimento, são exemplos de fatores de risco associados. Neste contexto, um dos maiores desafios para as organizações atualmente é trabalharem com os melhores fornecedores do mercado, procurando garantir a estabilidade em termos de fornecimento, com as melhores condições possíveis, quer a nível de preço, qualidade, entre outros, exigindo cada vez mais relações comerciais eficientes com os fornecedores. Assim, este trabalho tem como objetivo o desenvolvimento de um modelo baseado no método Data Envelopment Analysis (DEA), que permite às organizações avaliar e melhorar a eficiência das suas relações comerciais na gestão de risco de fornecimento nas suas cadeias de abastecimento. Como tal, o modelo proposto é divido em dois casos, que diferem pela origem da obtenção dos seus valores. Ou seja, num dos casos é aplicada uma avaliação externa à organização, e no outro é utilizada uma avaliação interna, o que permitirá discutir a sua utilização. Segundo o modelo proposto verificou-se que a eficiência média foi de 93% no caso I e 94% no caso II. Concluindo-se ainda ambos os casos necessitam de melhorias nos fornecimentos ao nível de: Qualidade, Logística e Tecnologia, ou seja, melhorar a qualidade dos serviços prestados, diminuir os seus prazos de execução dos serviços/fornecimento de material e aumento do conhecimento tecnológico.

Grande panorama de Lisboa em azulejo: Novos contributos para a fixação da data, encomenda e autoria

O Grande panorama de Lisboa, obra maior da azulejaria nacional e hoje à guarda do Museu Nacional do Azulejo, pertenceu outrora a um palácio situado na freguesia de Santiago, propriedade da família Ferreira de Macedo no final do século XVII. A investigação apresentada procura esclarecer alguns aspectos relacionados com a execução do grandioso painel e com o perfil sócio-cultural do encomendador. À luz de novos elementos documentais, o artigo discute ainda a questão da autoria do painel, dada há muito ao pintor barroco Gabriel del Barco.

Um modelo Data Envelopment Analysis para avaliação da eficiência dos terminais de contentores do grupo TERTIR

O transporte marítimo tem vindo a adquirir uma considerável importância na economia mundial desde o século XV. O transporte marítimo é visto como um dos meios de transporte mais viáveis, que engloba um largo número de destinos no mundo e representa, para uma determinada distância a percorrer, o menor custo por tonelada. É, também, comparativamente com o transporte aéreo e rodoviário, o meio de transporte menos poluente, tornando-o, assim, uma alternativa “amiga do ambiente”. Em particular, o transporte via contentores tem vindo a ser cada vez mais utilizado devido às suas inúmeras vantagens. O contentor permite o transporte de qualquer tipo de mercadoria em boas condições de acondicionamento e permitiu otimizar as operações efetuadas através da redução de tempo de trabalho, custos e espaço. Ademais, com a globalização, a evolução do mercado, a construção de navios de maiores dimensões e a maior tecnologia investida no setor, a competição entre os portos alcançou níveis que exigem uma maior eficiência de toda a estrutura portuária. Neste contexto, a presente dissertação visa avaliar a eficiência dos terminais de contentores do grupo TERTIR, nomeadamente os de Lisboa, Leixões e Setúbal, utilizando o método Data Envelopment Analaysis (DEA). De um modo geral, o método DEA avalia a capacidade dos terminais em converter inputs em outputs. Mais especificamente os inputs selecionados nesta dissertação dizem respeito às infraestruturas e equipamentos dos terminais em estudo, e o output considera a carga movimentada por cada terminal, sendo neste caso representada pelo número de TEUs movimentados. O modelo proposto é aplicado a um conjunto de 30 terminais de contentores Europeus de 6 países diferentes, nomeadamente, Alemanha, Bélgica, Espanha, França, Holanda e Portugal. De um modo geral, os terminais TERTIR apresentam níveis de eficiência baixos quando comparados com outros terminais Europeus. Os resultados contribuem, também, para auxiliar o grupo TERTIR no debate de algumas questões atuais com as autoridades portuárias, nomeadamente no que se refere à descida dos tarifários praticados aos seus clientes e à enunciada construção do terminal de contentores do Barreiro.

Modelos de negócios para a internet das coisas baseados em big data : Muzzley, um estudo de caso

A Internet das Coisas tal como o Big Data e a análise dos dados são dos temas mais discutidos ao querermos observar ou prever as tendências do mercado para as próximas décadas, como o volume económico, financeiro e social, pelo que será relevante perceber a importância destes temas na atualidade. Nesta dissertação será descrita a origem da Internet das Coisas, a sua definição (por vezes confundida com o termo Machine to Machine, redes interligadas de máquinas controladas e monitorizadas remotamente e que possibilitam a troca de dados (Bahga e Madisetti 2014)), o seu ecossistema que envolve a tecnologia, software, dispositivos, aplicações, a infra-estrutura envolvente, e ainda os aspetos relacionados com a segurança, privacidade e modelos de negócios da Internet das Coisas. Pretende-se igualmente explicar cada um dos “Vs” associados ao Big Data: Velocidade, Volume, Variedade e Veracidade, a importância da Business Inteligence e do Data Mining, destacando-se algumas técnicas utilizadas de modo a transformar o volume dos dados em conhecimento para as empresas. Um dos objetivos deste trabalho é a análise das áreas de IoT, modelos de negócio e as implicações do Big Data e da análise de dados como elementos chave para a dinamização do negócio de uma empresa nesta área. O mercado da Internet of Things tem vindo a ganhar dimensão, fruto da Internet e da tecnologia. Devido à importância destes dois recursos e á falta de estudos em Portugal neste campo, com esta dissertação, sustentada na metodologia do “Estudo do Caso”, pretende-se dar a conhecer a experiência portuguesa no mercado da Internet das Coisas. Visa-se assim perceber quais os mecanismos utilizados para trabalhar os dados, a metodologia, sua importância, que consequências trazem para o modelo de negócio e quais as decisões tomadas com base nesses mesmos dados. Este estudo tem ainda como objetivo incentivar empresas portuguesas que estejam neste mercado ou que nele pretendam aceder, a adoptarem estratégias, mecanismos e ferramentas concretas no que diz respeito ao Big Data e análise dos dados.

Return on assets in the Tobacco Industry analysis of the four main Tobacco Manufacturers

This paper studies operating profitability drivers in the Four Main Tobacco Manufacturers for the period 2004-2014. The operating profitability is analyzed as return on assets (ROA) based on the DuPont Extended Model breakdown in degree of operational risk, gross sales margin and assets turnover. The sources of ROA are market share and price strategies appraised through the drivers: firm-size, global value and strategic choices. Using consolidated data, results suggest that firm-size and global value holds a positive relationship with ROA. Also innovation through less harmful tobacco products can lead to better ROA despite no correlation between R&D and ROA.