Blind adaptive channel estimation for dual-rate DS/CDMA signals

This letter proposes the subspace-based blind adaptive channel estimation algorithm for dual-rate quasi-synchronous DS/CDMA systems, which can operate at the low-rate (LR) or high-rate (HR) mode. Simulation results show that the proposed blind adaptive algorithm at the LR mode has a better performance than that at the HR mode, with the cost of an increasing computational complexity.

Blind channel estimation for dual-rate DS/CDMA

This paper proposes a subspace based blind adaptive channel estimation algorithm for dual-rate DS-CDMA systems, which can operate at the low-rate (LR) or high-rate (HR) mode. Simulation results show that the proposed blind adaptive algorithm at the LR mode has a better performance than that at the HR mode, with the cost of an increased computational complexity.

Subspace-based blind adaptive multiuser detection for multirate DS/CDMA signals

The existing dual-rate blind linear detectors, which operate at either the low-rate (LR) or the high-rate (HR) mode, are not strictly blind at the HR mode and lack theoretical analysis. This paper proposes the subspace-based LR and HR blind linear detectors, i.e., bad decorrelating detectors (BDD) and blind MMSE detectors (BMMSED), for synchronous DS/CDMA systems. To detect an LR data bit at the HR mode, an effective weighting strategy is proposed. The theoretical analyses on the performance of the proposed detectors are carried out. It has been proved that the bit-error-rate of the LR-BDD is superior to that of the HR-BDD and the near-far resistance of the LR blind linear detectors outperforms that of its HR counterparts. The extension to asynchronous systems is also described. Simulation results show that the adaptive dual-rate BMMSED outperform the corresponding non-blind dual-rate decorrelators proposed by Saquib, Yates and Mandayam (see Wireless Personal Communications, vol. 9, p.197-216, 1998).

Perspex machine

We introduce the perspex machine which unifies projective geometry and the Turing machine, resulting in a supra-Turing machine. Specifically, we show that a Universal Register Machine (URM) can be implemented as a conditional series of whole numbered projective transformations. This leads naturally to a suggestion that it might be possible to construct a perspex machine as a series of pin-holes and stops. A rough calculation shows that an ultraviolet perspex machine might operate up to the petahertz range of operations per second. Surprisingly, we find that perspex space is irreversible in time, which might make it a candidate for an anisotropic spacetime geometry in physical theories. We make a bold hypothesis that the apparent irreversibility of physical time is due to the random nature of quantum events, but suggest that a sum over histories might be achieved by sampling fluctuations in the direction of time flow. We propose an experiment, based on the Casimir apparatus, that should measure fluctuations of time flow with respect to time duration- if such fluctuations exist.

Representing geometrical knowledge

This paper introduces perspex algebra which is being developed as a common representation of geometrical knowledge. A perspex can currently be interpreted in one of four ways. First, the algebraic perspex is a generalization of matrices, it provides the most general representation for all of the interpretations of a perspex. The algebraic perspex can be used to describe arbitrary sets of coordinates. The remaining three interpretations of the perspex are all related to square matrices and operate in a Euclidean model of projective space-time, called perspex space. Perspex space differs from the usual Euclidean model of projective space in that it contains the point at nullity. It is argued that the point at nullity is necessary for a consistent account of perspective in top-down vision. Second, the geometric perspex is a simplex in perspex space. It can be used as a primitive building block for shapes, or as a way of recording landmarks on shapes. Third, the transformational perspex describes linear transformations in perspex space that provide the affine and perspective transformations in space-time. It can be used to match a prototype shape to an image, even in so called 'accidental' views where the depth of an object disappears from view, or an object stays in the same place across time. Fourth, the parametric perspex describes the geometric and transformational perspexes in terms of parameters that are related to everyday English descriptions. The parametric perspex can be used to obtain both continuous and categorical perception of objects. The paper ends with a discussion of issues related to using a perspex to describe logic.

Sustainable food? Teikei, co-operatives and food citizenship in Japan and the UK

This paper explores in particular how Teikei groups, as forms of Community Supported Agriculture (CSA), operate in Japan, focussing on one particular group. The paper links the Teikei approach to debates around social capital and consumer-citizenship, arguing that pre-existing consumer/citizen institutions may usefully be engaged in developing food citizenship and CSA operations. The discussion is linked to CSA and various other alternative food networks (AFNs) that have grown up in various forms in Japan, the US, the UK and elsewhere in Europe over the past thirty years or so. CSA in similar fashion to Teikei involves bringing producers and consumers closer together in terms of reconnecting the agricultural producer and consumer to aid food traceability and quality (including organic). CSA also exhibits elements of new assemblies of agricultural governance based on enhanced consumer-citizenship where consumers, to varying degrees, have a say in what and how produce is grown and how the land is managed.

Dynamic Niche Clustering: a fuzzy variable radius niching technique for multimodal optimisation in GAs

This paper describes the recent developments and improvements made to the variable radius niching technique called Dynamic Niche Clustering (DNC). DNC is fitness sharing based technique that employs a separate population of overlapping fuzzy niches with independent radii which operate in the decoded parameter space, and are maintained alongside the normal GA population. We describe a speedup process that can be applied to the initial generation which greatly reduces the complexity of the initial stages. A split operator is also introduced that is designed to counteract the excessive growth of niches, and it is shown that this improves the overall robustness of the technique. Finally, the effect of local elitism is documented and compared to the performance of the basic DNC technique on a selection of 2D test functions. The paper is concluded with a view to future work to be undertaken on the technique.

Tendering: optimization and rationality

There have been various techniques published for optimizing the net present value of tenders by use of discounted cash flow theory and linear programming. These approaches to tendering appear to have been largely ignored by the industry. This paper utilises six case studies of tendering practice in order to establish the reasons for this apparent disregard. Tendering is demonstrated to be a market orientated function with many subjective judgements being made regarding a firm's environment. Detailed consideration of 'internal' factors such as cash flow are therefore judged to be unjustified. Systems theory is then drawn upon and applied to the separate processes of estimating and tendering. Estimating is seen as taking place in a relatively sheltered environment and as such operates as a relatively closed system. Tendering, however, takes place in a changing and dynamic environment and as such must operate as a relatively open system. The use of sophisticated methods to optimize the value of tenders is then identified as being dependent upon the assumption of rationality, which is justified in the case of a relatively closed system (i.e. estimating), but not for a relatively open system (i.e. tendering).

Local management and landscape drivers of pollination and biological control services in a Kenyan agro-ecosystem

Arthropods that have a direct impact on crop production (i.e. pests, natural enemies and pollinators) can be influenced by both local farm management and the context within which the fields occur in the wider landscape. However, the contributions and spatial scales at which these drivers operate and interact are not fully understood, particularly in the developing world. The impact of both local management and landscape context on insect pollinators and natural enemy communities and on their capacity to deliver related ecosystem services to an economically important tropical crop, pigeonpea was investigated. The study was conducted in nine paired farms across a gradient of increasing distance to semi-native vegetation in Kibwezi, Kenya. Results show that proximity of fields to semi-native habitats negatively affected pollinator and chewing insect abundance. Within fields, pesticide use was a key negative predictor of pollinator, pest and foliar active predator abundance. On the contrary, fertilizer application significantly enhanced pollinator and both chewing and sucking insect pest abundance. At a 1 km spatial scale of fields, there were significant negative effects of the number of semi-native habitat patches within fields dominated by mass flowering pigeonpea on pollinators abundance. For service provision, a significant decline in fruit set when insects were excluded from flowers was recorded. This study reveals the interconnections of pollinators, predators and pests with pigeonpea crop. For sustainable yields and to conserve high densities of both pollinators and predators of pests within pigeonpea landscapes, it is crucial to target the adoption of less disruptive farm management practices such as reducing pesticide and fertilizer inputs.

Designing persuasive third party applications for social networking services based on the 3D-RAB model

The use of social networks services for promoting business, teaching, learning, persuasion and spread of information continues to attract attention as most social networking services (SNSs) now allow third party applications to operate on their sites. In the field of persuasive technology, the ability of SNSs to build relationships among their users and create momentum and enthusiasm through rapid cycles also give it a greater advantage over other persuasive technology approaches. In this paper we discuss the 3-dimensional relationship between attitude and behavior (3D-RAB) model, and demonstrate how it can be used in designing third-party persuasive applications in SNSs by considering external factors which affects persuasive strategies.

Virginia Woolf, Hugh Walpole, the Hogarth Press, and the Book Society

This article explores the unlikely relationship and alliance between the novelists Virginia Woolf and Hugh Walpole. It examines the ways in which these typically highbrow and middlebrow writers influenced each others’ lives and work, and focuses in particular on the interactions between the Woolfs’ Hogarth Press and Walpole’s Book Society, the first book club to operate in Great Britain. The article uses a number of case studies drawn from the Hogarth Press archives to demonstrate how by the 1930s, the Hogarth Press was much more commercial in its operations and pursuits of reading markets than is often recognized.

Scripture, style and persuasion in seventeenth-century English theories of preaching

The distinction between a Puritan ‘plain’ and a Laudian ‘metaphysical’ preaching style rests on secular rhetorical theories of persuasion that are relatively unimportant to early Stuart homiletics but are central to later Latitudinarian polemics on preaching. Instead, the ‘English Reformed’ theory and method of sermon composition rests on the didactic function of preaching and the need for the Holy Spirit and hearers to co-operate with the preacher. Although Andrewes and some avant-garde conformists questioned this theory, they developed no alternative method of composition. Arguments made in the 1650s for direct inspiration by the Spirit contributed to the decline of both theory and method

Patents for plants: context and current status

One of the important themes in any discussion concerning the application of genetic transformation technology in horticulture or elsewhere is the role of Intellectual Property Rights (IPR). This term covers both the content of patents and the confidential expertise, usually related to methodology and referred to as “Trade Secrets”. This review will explain the concepts behind patent protection, and will discuss the wide-ranging scope of existing patents that cover novel genotypes of plants as well as all aspects of transgenic technology, from selectable markers and novel promoters to methods of gene introduction. Although few of these patents have any significant commercial value there are a small number of key patents that may restrict the “freedom to operate” of any company seeking to exploit the methods in the production of transgenic varieties. Over the last twenty years, these restrictions have forced extensive cross-licensing between ag-biotech companies and have been one of the driving forces behind the consolidation of these companies. Although such issues may have limited relevance in the horticultural sector, and are often considered to be of little interest to the academic scientist working in the public sector, they are of great importance in any debate about the role of “public-good breeding” and of the relationship between the public and private sectors.

Restructuring and rescaling water governance in mining contexts: the co-production of waterscapes in Peru

The governance of water resources is prominent in both water policy agendas and academic scholarship. Political ecologists have made important advances in reconceptualising the relationship between water and society. Yet, while they have stressed both the scalar dimensions, and the politicised nature, of water governance, analyses of its scalar politics are relatively nascent. In this paper, we consider how the increased demand for water resources by the growing mining industry in Peru reconfigures and rescales water governance. In Peru, the mining industry’s thirst for water draws in, and reshapes, social relations, technologies, institutions and discourses that operate over varying spatial and temporal scales. We develop the concept of waterscape to examine these multiple ways in water is co-produced through mining, and become embedded in changing modes and structures of water governance, often beyond the watershed scale. We argue that an examination of waterscapes avoids the limitations of thinking about water in purely material terms, structuring analysis of water issues according to traditional spatial scales and institutional hierarchies, and taking these scales and structures for granted.

The regional focus of Asian multinational enterprises

In recent issues of this Journal a debate has raged concerning the appropriate nature of academic research in the Asia Pacific region. While we support the desire for both rigor and regional relevance in this research, we wish to demonstrate a strong commonality between the performance of large Asian firms and others from Europe and North America. This prompts us to question the need for a new theory of the MNE based on the experience of Asian firms. Like their counterparts elsewhere, the large Asian firms mostly operate on an intra-regional basis. While in the literature it has been assumed that the path to success for Asian firms is globalization, we show that the data supporting this is confined to a handful of unrepresentative case studies. We also present a bibliometric analysis which shows an overwhelming case study sample selection bias in academic studies towards this small number of unrepresentative cases