The Influence of Processing Parameters on Characteristics of an Aluminum Alloy Spray Deposition

In the present investigation, two nozzle configurations are used for spray deposition, convergent nozzle (nozzle-A), and convergent nozzle with 2 mm parallel portion attached at its end (nozzle-C) without changing the exit area. First, the conditions for subambient aspiration pressure, i.e., pressure at the tip of the melt delivery tube, are established by varying the protrusion length of the melt delivery tube at different applied gas pressures for both of the nozzles. Using these conditions, spray deposits in a reproducible manner are successfully obtained for 7075 Al alloy. The effect of applied gas pressure, flight distance, and nozzle configuration on various characteristics of spray deposition, viz., yield, melt flow rate, and gas-to-metal ratio, is examined. The over-spray powder is also characterized with respect to powder size distribution, shape, and microstructure. Some of the results are explained with the help of numerical analysis presented in an earlier article.

Functional activation during the Rapid Visual Information Processing task in a middle aged cohort: An fMRI study

The Rapid Visual Information Processing (RVIP) task, a serial discrimination task where task performance believed to reflect sustained attention capabilities, is widely used in behavioural research and increasingly in neuroimaging studies. To date, functional neuroimaging research into the RVIP has been undertaken using block analyses, reflecting the sustained processing involved in the task, but not necessarily the transient processes associated with individual trial performance. Furthermore, this research has been limited to young cohorts. This study assessed the behavioural and functional magnetic resonance imaging (fMRI) outcomes of the RVIP task using both block and event-related analyses in a healthy middle aged cohort (mean age = 53.56 years, n = 16). The results show that the version of the RVIP used here is sensitive to changes in attentional demand processes with participants achieving a 43% accuracy hit rate in the experimental task compared with 96% accuracy in the control task. As shown by previous research, the block analysis revealed an increase in activation in a network of frontal, parietal, occipital and cerebellar regions. The event related analysis showed a similar network of activation, seemingly omitting regions involved in the processing of the task (as shown in the block analysis), such as occipital areas and the thalamus, providing an indication of a network of regions involved in correct trial performance. Frontal (superior and inferior frontal gryi), parietal (precuenus, inferior parietal lobe) and cerebellar regions were shown to be active in both the block and event-related analyses, suggesting their importance in sustained attention/vigilance. These networks and the differences between them are discussed in detail, as well as implications for future research in middle aged cohorts.

Analytical solution of unsteady three-dimensional MHD boundary layer flow and heat transfer due to impulsively stretched plane surface

The unsteady magnetohydrodynamic viscous flow and heat transfer of Newtonian fluids induced by an impulsively stretched plane surface in two lateral directions are studied by using an analytic technique, namely, the homotopy method. The analytic series solution presented here is highly accurate and uniformly valid for all time in the entire region. The effects of the stretching ratio and the magnetic field on the surface shear stresses and heat transfer are studied. The surface shear stresses in x- and y-directions and the surface heat transfer are enchanced by increasing stretching ratio for a fixed value of the magnetic parameter. For a fixed stretching ratio, the surface shear stresses increase with the magnetic parameter, but the heat transfer decreases. The Nusselt number takes longer time to reach the steady state than the skin friction coefficients. There is a smooth transition from the initial unsteady state to the steady state.

Ion beam processing of oriented CuO films deposited on (100) YSZ by laser ablation

A systematic study of Ar ion implantation in cupric oxide films has been reported. Oriented CuO films were deposited by pulsed excimer laser ablation technique on (1 0 0) YSZ substrates. X-ray diffraction (XRD) spectra showed the highly oriented nature of the deposited CuO films. The films were subjected to ion bombardment for studies of damage formation, Implantations were carried out using 100 keV Arf over a dose range between 5 x 10(12) and 5 x 10(15) ions/cm(2). The as-deposited and ion beam processed samples were characterized by XRD technique and resistance versus temperature (R-T) measurements. The activation energies for electrical conduction were found from In [R] versus 1/T curves. Defects play an important role in the conduction mechanism in the implanted samples. The conductivity of the film increases, and the corresponding activation energy decreases with respect to the dose value.

Effect of curve crossing on absorption and resonance Raman spectra: analytical treatment for delta-function coupling in parabolic potentials

We propose an exactly solvable model for the two-state curve-crossing problem. Our model assumes the coupling to be a delta function. It is used to calculate the effect of curve crossing on the electronic absorption spectrum and the resonance Raman excitation profile.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

Analytical studies of gain optimization in CO2-N2 gasdynamic lasers employing two-dimensional wedge nozzles

An analytical method has been proposed to optimise the small-signaloptical gain of CO2-N2 gasdynamic lasers (gdl) employing two-dimensional (2D) wedge nozzles. Following our earlier work the equations governing the steady, inviscid, quasi-one-dimensional flow in the wedge nozzle of thegdl are reduced to a universal form so that their solutions depend on a single unifying parameter. These equations are solved numerically to obtain similar solutions for the various flow quantities, which variables are subsequently used to optimize the small-signal-gain. The corresponding optimum values like reservoir pressure and temperature and 2D nozzle area ratio also have been predicted and graphed for a wide range of laser gas compositions, with either H2O or He as the catalyst. A large number of graphs are presented which may be used to obtain the optimum values of small signal gain for a wide range of laser compositions without further computations.

Análisis de la preposición hacia y establecimiento de sus equivalentes en finés

Title of the Master's thesis: Análisis de la preposición hacia y establecimiento de sus equivalentes en finés (trans. Analysis of the Spanish preposition hacia and the finding of its equivalents in Finnish) Abstracts: The aim of this Master thesis is to provide a detailed analysis of the Spanish preposition hacia from a cognitive perspective and to establish its equivalents in Finnish language. In this sense, my purpose is to demonstrate the suitability of both cognitive perspectives and Contrastive Linguistics for semantic analysis. This thesis is divided into five chapters. The first chapter includes a presentation and a critical review of the monolingual lexical processing and semantic analysis of the Spanish preposition hacia in major reference works. Through this chapter it is possible to see both the inadequacies and omissions that are present in all the given definitions. In this sense, this chapter shows that these problems are not but the upper stage of an ontological (and therefore methodological) problem in the treatment of prepositions. The second chapter covers the presentation of the methodological and theoretical perspective adopted for this thesis for the monolingual analysis and definition of the Spanish preposition hacia, following mainly the guidelines established by G. Lakoff (1987) and R. Langacker (2008) in his Cognitive grammar. Taken together, and within the same paradigm, recent analytical and methodological contributions are discussed critically for the treatment of polysemy in language (cf. Tyler ja Evans 2003). In the third chapter, and in accordance with the requirements regarding the use of empirical data from corpora, is my aim to set out a monolingual original analysis of the Spanish preposition hacia in observance of the principles and the methodology spelled out in the second chapter. The main objective of this chapter is to build a full fledged semantic representation of the polysemy of this preposition in order to understand and articulate its meanings with Finnish language (and other possible languages). The fourth chapter, in accordance with the results of chapter 3, examines and describes and establishes the corresponding equivalents in Finnish for this preposition. The results obtained in this chapter are also contrasted with the current bilingual lexicographical definitions found in the most important dictionaries and grammars. Finally, in the fifth chapter of this thesis, the results of this work are discussed critically. In this way, some observations are given regarding both the ontological and theoretical assumptions as well regarding the methodological perspective adopted. I also present some notes for the construction of a general methodology for the semantic analysis of Spanish prepositions to be carried out in further investigations. El objetivo de este trabajo, que caracterizamos como una tarea de carácter comparativo-analítico, es brindar un análisis detallado de la preposición castellana hacia desde una perspectiva cognitiva en tanto y a través del establecimiento de sus equivalentes en finés. Se procura, de esta forma, demostrar la adecuación de una perspectiva cognitiva tanto para el examen como para el establecimiento y articulación de la serie de equivalentes que una partícula, en nuestro caso una preposición, encuentra en otra lengua. De esta forma, y frente a definiciones canónicas que advierten sobre la imposibilidad de una caracterización acabada del conjunto de usos de una preposición, se observa como posible, a través de la aplicación de una metodología teórica-analítica adecuada, la construcción de una definición viable tanto en un nivel jerárquico como descriptivo. La presente tesis se encuentra dividida en cinco capítulos. El primer capítulo comprende una exposición y revisión critica del tratamiento monolingüe lexicográfico y analítico que la preposición hacia ha recibido en las principales obras de referencia, donde se observa que las inadecuaciones y omisiones presentes en la totalidad de las definiciones analizadas representan tan sólo el estadio superior de una problemática de carácter ontológico y, por tanto, metodológico, en el tratamiento de las preposiciones. El capítulo segundo comprende la presentación de la perspectiva teórica metodológica adoptada en esta tesis para el análisis y definición monolingüe de la preposición hacia, teniendo por líneas directrices las propuestas realizadas por G. Lakoff , así como a los fundamentos establecidos por R. Langacker en su propuesta cognitiva para una nueva gramática. En forma conjunta y complementaria, y dentro del mismo paradigma, empleamos, discutimos críticamente y desarrollamos diferentes aportes analítico-metodológicos para el tratamiento de la polisemia en unidades lingüísticas locativas. En el capítulo tercero, y en acuerdo con las exigencias respecto a la utilización de datos empíricos obtenidos a partir de corpus textuales, se expone un análisis original monolingüe de la preposición hacia en observancia de los principios y la metodología explicitada en el capítulo segundo, teniendo por principal objetivo la construcción de una representación semántica de la polisemia de la preposición que comprenda y articule los sentidos prototípicos para ésta especificados. El capítulo cuarto, y en acuerdo con los resultados de nuestro análisis monolingual de la preposición, se examinan, describen y establecen los equivalentes correspondientes en finés para hacia; asimismo, se contrastan en este capítulo los resultados obtenidos con las definiciones lexicográficas bilingües vigentes. Se recogen en el último y quinto capítulo de esta tesis algunas observaciones tanto respecto a los postulados ontológicos y teórico-metodológicos de la perspectiva adoptada, así como algunas notas para la construcción de una metodología general para el análisis semántico preposicional.

Pedagogical tools designed to promote engagement and active learning in the biomedical sciences and allied health disciplines

Perceiving students, science students especially, as mere consumers of facts and information belies the importance of a need to engage them with the principles underlying those facts and is counter-intuitive to the facilitation of knowledge and understanding. Traditional didactic lecture approaches need a re-think if student classroom engagement and active learning are to be valued over fact memorisation and fact recall. In our undergraduate biomedical science programs across Years 1, 2 and 3 in the Faculty of Health at QUT, we have developed an authentic learning model with an embedded suite of pedagogical strategies that foster classroom engagement and allow for active learning in the sub-discipline area of medical bacteriology. The suite of pedagogical tools we have developed have been designed to enable their translation, with appropriate fine-tuning, to most biomedical and allied health discipline teaching and learning contexts. Indeed, aspects of the pedagogy have been successfully translated to the nursing microbiology study stream at QUT. The aims underpinning the pedagogy are for our students to: (1) Connect scientific theory with scientific practice in a more direct and authentic way, (2) Construct factual knowledge and facilitate a deeper understanding, and (3) Develop and refine their higher order flexible thinking and problem solving skills, both semi-independently and independently. The mindset and role of the teaching staff is critical to this approach since for the strategy to be successful tertiary teachers need to abandon traditional instructional modalities based on one-way information delivery. Face-to-face classroom interactions between students and lecturer enable realisation of pedagogical aims (1), (2) and (3). The strategy we have adopted encourages teachers to view themselves more as expert guides in what is very much a student-focused process of scientific exploration and learning. Specific pedagogical strategies embedded in the authentic learning model we have developed include: (i) interactive lecture-tutorial hybrids or lectorials featuring teacher role-plays as well as class-level question-and-answer sessions, (ii) inclusion of “dry” laboratory activities during lectorials to prepare students for the wet laboratory to follow, (iii) real-world problem-solving exercises conducted during both lectorials and wet laboratory sessions, and (iv) designing class activities and formative assessments that probe a student’s higher order flexible thinking skills. Flexible thinking in this context encompasses analytical, critical, deductive, scientific and professional thinking modes. The strategic approach outlined above is designed to provide multiple opportunities for students to apply principles flexibly according to a given situation or context, to adapt methods of inquiry strategically, to go beyond mechanical application of formulaic approaches, and to as much as possible self-appraise their own thinking and problem solving. The pedagogical tools have been developed within both workplace (real world) and theoretical frameworks. The philosophical core of the pedagogy is a coherent pathway of teaching and learning which we, and many of our students, believe is more conducive to student engagement and active learning in the classroom. Qualitative and quantitative data derived from online and hardcopy evaluations, solicited and unsolicited student and graduate feedback, anecdotal evidence as well as peer review indicate that: (i) our students are engaging with the pedagogy, (ii) a constructivist, authentic-learning approach promotes active learning, and (iii) students are better prepared for workplace transition.

Experimental and Analytical Investigations of the actions taking place in a Synchronous machine during the starting period when the starting Is effected by means of alternating current

The literature on the subject of the present investigation is somewhat meagre. A rotary converter or synchronous motor no! provided with any special starting devices forms, when started from the alternating current side, a type of induction motor whoso Htator is provided with a polyphase winding, and whoso rotor has a single-phase (or single magnetic axis) winding.

Eigennamen in Pressetexten : Ein Vergleich zweier Online-Zeitungen

Tämä pro gradu -tutkielma vertailee korpuksen avulla erisnimien kvantitatiivista jakautumista luokkiin kahdessa saksalaisessa verkkolehdessä. Työn tavoitteena on selvittää, kuinka erisnimiä voidaan luokitella ja mitä eroja niiden avulla on havaittavissa lehtien raportoinnissa. Laajempana kehyksenä toimii kysymys siitä, voidaanko erisnimiä hyödyntäen hahmottaa lehtien sisältöjä. Korpus on kerätty Frankfurter Allgemeine Zeitungin ja Süddeutsche Zeitungin verkkolehtien http: //www.faz.net (FAZ) ja http://www.sueddeutsche.de (SZ) artikkeleista ajalta 2.11.2004-8.11.2004. Valitut sivustot edustavat Saksan arvostetuimpien päivittäisten, koko maan kattavien sanomaleh- tien verkkojulkaisuja. Näistä FAZ:ia pidetään konservatiivisena ja SZ:ia liberaalina lehtenä. Kumpikin korpus käsittelee USA:n presidentinvaaleja syksyllä 2004 ja sisältää hieman alle 30 000 sanaa noin 40 lehtiartikkelista. Aihesidonnaisen korpuksen valinta perustuu erityisesti siihen, että tutkimuksen päämääränä on saada erisnimien avulla selville, miltä osin FAZ ja SZ eroavat toisistaan käsitellessään samaa aihetta. Teoriaosassa käydään läpi saksalaisten verkkolehtien taustaa, työhön liittyviä tekstilingvistisiä teo- rioita sekä erisnimien erikoispiirteitä. Siinä käsitellään myös kolmea aiempaa, saksankielisen eris- nimitutkimuksen luokittelua ja yhtä englanninkielistä, kieliteknologian luokittelua. Näissä havaitut puutteet motivoivat yhdistelemään ja muuttamaan olemassa olevia luokitteluja tätä työtä varten. Uusi luokittelu sisältää neljä yläluokkaa (olentojen, maantieteelliset, instituutioden ja asioiden ni- met), jotka kaikki kattavat kahdesta yhdeksään alaluokkaa. Kummankin korpuksen erisnimet luo- kitellaan tämän perusteella. Kvantitatiivinen analyysi keskittyy ylä- ja alaluokkien vertailuun lehtien välillä. Lisäksi se kattaa sekä kummankin aineiston että pääluokkien frekventimpien sanojen tarkastelun. Vaikka FAZ ja SZ käyttivätkin pääosin samoja erisnimiä raportoinnissaan, voidaan lehtien välillä osoittaa selkeitä eroja alaluokkien kohdalla ja vähäisiä eroja erisnimien jakautumisessa yläluokkiin. chi2 -testin näytti kuitenkin, että erisnimien jakautuminen yläluokkiin on lehtisidonnaista. Siksi voidaan väittää, että muun muassa valittu media vaikuttaa erisnimivalintoihin. Erisnimien frekvenssit antavat ymmärtää, että SZ raportoisi monipuolisemmin kuin FAZ, joka käyttää erisnimiä keskitetymmin. SZ:in aineiston erisnimiä yhdistää eurooppalainen näkökulma vaaleihin, kun taas FAZ pyrkii tuomaan esille tapahtumia USA:n eri osavaltioissa. Niin lehdissä mainitut henkilöiden kuin instituutioden nimet tukevat tätä väitetettä. SZ korostaa maantieteellisesti kaupunkien merkitystä, FAZ osavaltioiden. Saadut tulokset osoittavat, että tämänkaltaisen erisnimitutkimuksen soveltaminen lehtiteksteihin on mahdollista. Luokitellut erisnimet heijastavat osittain käsiteltyjen aineistojen sisältöä ja paljastavat raportoinnin painopisteistä.

Ginger (Zingiber officinale) autotetraploids with improved processing quality produced by an in vitro colchicine treatment

Ginger autotetraploids were produced by immersing shoot tips in a 0.5% w/v colchicine, 2% v/v dimethyl sulfoxide solution for 2 h. Stomatal measurements were used as an early indicator of ploidy differences in culture with mean stomata length of tetraploids (49.2 μm) being significantly larger than the diploid (38.8 µm). Of the 500 shoot tips treated, 2% were characterised as stable autotetraploid lines following field evaluation over several seasons. Results were confirmed with flow cytometry and, of the 7 lines evaluated for distinctness and uniformity, 6 were solid tetraploid mutants and 1 was a periclinal chimera. Significant differences were noted between individual tetraploid lines in terms of shoot length, leaf length, leaf width, size of rhizome sections (knob weight) and fibre content. The solid autotetraploid lines had significantly wider, greener leaves than the diploids, they had significantly fewer but thicker shoots and, although ‘Queensland’ (the diploid parent from which the tetraploids were derived) had a greater total rhizome mass at harvest, its knob size was significantly smaller. From the autotetraploid lines, one line was selected for commercial release as ‘Buderim Gold’. It compared the most favourably with ‘Queensland’ in terms of the aroma/flavour profile and fibre content at early harvest, and had consistently good rhizome yield. More importantly it produced large rhizome sections, resulting in a higher recovery of premium grade confectionery ginger and a more attractive fresh market product.