A nutrient balance model for typical Irish farming systems

The twin objectives of the work described were to construct nutrient balance models (NBM) for a range of Irish animal production systems and to evaluate their potential as a means of estimating the nutrient composition of farm wastes. The NBM has three components. The first is the intake of nutrients in the animal's diet. The second is retention or the nutrients the animal retains for the production of milk, meat or eggs. The third is the balance or the difference between the nutrient intake and retention. Data on the intake levels and their nutrient value for dairy cows, beef cattle, pigs and poultry systems were assembled. Literature searches and interviews with National experts were the primary sources of information. NBMs were then constructed for each production system. Summary tables of the nutrient values for the common diet constituents used in Irish animal production systems, the nutrient composition of the animal products and the NBMs (nutrient intake, retention and excretion) for a range of production systems were assembled. These represent the first comprehensive data set of this type for Irish animal production systems. There was generally good agreement between the derived NBMs values and those published in the literature. The NBMs were validated on a number of farms. Data on animal numbers, fertiliser use, concentrates inputs and production output were recorded on seven farms. Using the data a nutrient input/output balance was constructed for each farm. This was compared with the NBM estimate of the farm nutrient balance. The results showed good agreement between the measured balance and the NBM estimate particularly for the pig and poultry farms. However, the validation emphasised the inherent risks associated with NBMs. The average values used for feed intake and production parameters in the NEMs may result in the under or over estimate of actual nutrient balances on individual farms where these variables are substantially different. On the grassland farms there was a poor correlation between the input/output estimate and the NBM. This possibly results from the omission of the soil's contribution to the nutrient balance. However, the results indicate that the NBMs developed are a potentially useful tool for estimating nutrient balances. They also will serve to highlight the significant fraction of the nutrient inputs into farming systems that are retained on the farm. The potential of the NBM as a means of estimating the nutrient composition of farm wastes was evaluated on two farms. Feed intake and composition, animal production, slurry production was monitored during the indoor winter feeding period. Slurry samples were taken for analysis. The appropriates NBMs were used to estimate the nutrient balance for each farm. The nutrient content of the slurry produced was calculated. There was a good agreement between the NBM estimate and the measured values. This preliminary evaluation suggests that the NBM has a potential to provide the farmer with a simple means of estimating the nutrient value of his slurry.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Development of an inspection regime for on-site domestic wastewater treatment systems

The overall purpose of this study was to develop a thorough inspection regime for onsite wastewater treatment systems, which is practical and could be implemented on all site conditions across the country. With approximately 450,000 onsite wastewater treatment systems in Ireland a risk based methodology is required for site selection. This type of approach will identify the areas with the highest potential risk to human health and the environment and these sites should be inspected first. In order to gain the required knowledge to develop an inspection regime in-depth and extensive research was earned out. The following areas of pertinent interest were examined and reviewed, history of domestic wastewater treatment, relevant wastewater legislation and guidance documents and potential detrimental impacts. Analysis of a questionnaire from a prior study, which assessed the resources available and the types of inspections currently undertaken by Local authorities was carried out. In addition to the analysis of the questionnaire results, interviews were carried out with several experts involved in the area of domestic wastewater treatment. The interview focussed on twelve key questions which were directed towards the expert’s opinions on the vital aspects of developing an inspection regime. The background research, combined with the questionnaire analysis and information from the interviews provided a solid foundation for the development of an inspection regime. Chapter 8 outlines the inspection regime which has been developed for this study. The inspection regime includes a desktop study, consultation with the homeowners, visual site inspection, non-invasive site tests, and inspection of the treatment systems. The general opinion from the interviews carried out, was that a standardised approach for the inspections was necessary. For this reason an inspection form was produced which provides a standard systematic approach for inspectors to follow. This form is displayed in Appendix 3. The development of a risk based methodology for site selection was discussed and a procedure similar in approach to the Geological Survey of Irelands Groundwater Protection Schemes was proposed. The EPA is currently developing a risk based methodology, but it is not available to the general public yet. However, the EPA provided a copy of a paper outlining the key aspects of their methodology. The methodology will use risk maps which take account of the following parameters: housing density, areas with inadequate soil conditions, risk of water pollution through surface and subsurface pathways. Sites identified with having the highest potential risk to human health and the environment shall be inspected first. Based on the research carried out a number of recommendations were made which are outlined in Chapter 10. The principle conclusion was that, if these systems fail to operate satisfactorily, home owners need to understand that these systems dispose of the effluent to the 'ground' and the effluent becomes part of the hydrological cycle; therefore, they are a potential hazard to the environment and human health. It is the owners, their families and their neighbours who will be at most immediate risk.

middleware for cooperating mobile embedded systems

Mobile embedded systems, wireless communication, real-time systems, real-time scheduling, communication protocols, cooperation, reliability and fault-tolerance, middleware

Einfluss einer fokalen Ischämie auf die Genexpression des somatostatinergen Systems und die sst2-Rezeptoraktivierung im Gehirn der Ratte

Somatostatin, cortistatin, focal cerebral ischemia, immunohistochemistry and internalization

Power quality studies in distribution systems involving spectral decomposition

Distribution systems, eigenvalue analysis, nodal admittance matrix, power quality, spectral decomposition

Models and methods for supporting lot sizing decisions in product recovery systems

Magdeburg, Univ., Fak. für Wirtschaftswiss., Diss., 2011

Emotion recognition within spoken dialog systems

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2011

Glutamatdecarboxylase-Immunreaktivität im Neuropil ausgewählter Areale des limbischen Systems bei Patienten mit affektiven Störungen mit und ohne suizidalem Verhalten und Kontrollen : eine morphometrische Untersuchung

Magdeburg, Univ., Medizin. Fakultät, Diss., 2009

Stochastic effects and uncertainties in assessing electromagnetic interactions with control systems

Electromagnetic compatibility, lightning, crosstalk surge voltages, Monte Carlo simulation, accident initiator

Convex and toric geometry to analyze complex dynamics in chemical reaction systems

Convex cone, toric variety, graph theory, electrochemical catalysis, oxidation of formic acid, feedback-loopsbifurcations, enzymatic catalysis, Peroxidase reaction, Shil'nikov chaos

Antenna theory in resonating systems derived from fundamental electromagnetism

Theoretische Elektrotechnik, Elektromagnetische Verträglichkeit, Antennentheorie, Elektrodynamik, Mathematische Methoden der Physik, Leitungstheorie, Mikrowellentechnik, Hohlraumresonatoren

Reflective and adaptive middleware for software evolution of information systems

Magdeburg, Univ., Fak. für Informatik, Diss., 2007

Adaptive numerical simulation of reaction - diffusion systems

Fluidized beds, granulation, heat and mass transfer, calcium dynamics, stochastic process, finite element methods, Rosenbrock methods, multigrid methods, parallelization

Non-linear model reduction and control of molten carbonate fuel cell systems with internal reforming fuel cell systems with internal reforming

Magdeburg, Univ., Diss, 2007