Diagnóstico de plasma de cátodo oco: análise da ação de plasma de argônio e Ar-H2 para a deposição de filmes finos de titânio em pós-descarga

Plasma DC hollow cathode has been used for film deposition by sputtering with release of neutral atoms from the cathode. The DC Plasma Ar-H2 hollow cathode currently used in the industry has proven to be effective in cleaning surfaces and thin film deposition when compared to argon plasma. When we wish to avoid the effects of ion bombardment on the substrate discharge, it uses the post-discharge region. Were generated by discharge plasma of argon and hydrogen hollow cathode deposition of thin films of titanium on glass substrate. The optical emission spectroscopy was used for the post-discharge diagnosis. The films formed were analyzed by mechanical profilometry technique. It was observed that in the spectrum of the excitation lines of argon occurred species. There are variations in the rate of deposition of titanium on the glass substrate for different process parameters such as deposition time, distance and discharge working gases. It was noted an increase in intensity of the lines of argon compared with the lines of titanium. Deposition with argon and hydrogen in glass sample observed a higher rate deposition of titanium as more closer the sample was in the discharge

Diagnóstico de descarga de cátodo oco de ar e pós-descarga Ar N2 por espectroscopia de emissão óptica e espectrometria de massa

Many applications require that the plasma discharge is produced apart from the surface to be processed, thus preventing damage caused by bombardment and/or plasma radiation. In the post-discharge regime in various applications thermally sensitive materials can be used. In this work, active species produced by discharge and post-discharge hollow cathode were diagnosed by optical emission spectroscopy and mass spectrometry. The discharge was produced with the gases Ar and Ar - N2 gas flow ranging from 1 to 6 cm3/min and electric current between 150 to 600 mA. It was estimated that the ion density inside the hollow cathode, with 2 mm diameter ranged between 7.71 and 14.1 x 1015 cm-3. It was observed that the gas flow and the electric current changes the emission intensity of Ar and N2 species. The major ionic species detected by quadrupole mass spectrometry were Ar+ and N2+. The ratio of optical emission intensities of N2(1 +)/Ar(811 nm) was related to the partial pressure of N2 after the hollow cathode discharge at low pressure

Seletividade de herbicidas aplicados em pós-emergência sobre capim-colonião e efeito na qualidade das sementes: effects on seed germination

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de sistemas a base de tensoativos para recuperação avançada de petróleo

Petroleum is a complex combination of various classes of hydrocarbons, with paraffinic, naphtenic and aromatic compounds being those more commonly found in its composition. The recent changes in the world scenario, the large reserves of heavy oils and also the lack of new discoveries of large petroleum fields are indications that, in the near future, the oil recovery by conventional methods will be limited. In order to increase the efficiency of the extraction process, enhanced recovery methods are cited in applications where conventional techniques have proven to be little effective. The injection of surfactant solutions as an enhanced recovery method is advantageous in that surfactants are able to reduce the interfacial tensions between water and oil, thus augmenting the displacement efficiency and, as a consequence, increasing the recovery factor. This work aims to investigate the effects of some parameters that influence the surfactant behavior in solution, namely the type of surfactant, the critical micelle concentration (CMC) and the surface and interface tensions between fluids. Seawater solutions containing the surfactants PAN, PHN and PJN have been prepared for presenting lower interfacial tensions with petroleum and higher stability under increasing temperature and salinity. They were examined in an experimental apparatus designed to assess the recovery factor. Botucatu (Brazil) sandstone plug samples were submitted to assay steps comprising saturation with seawater and petroleum, conventional recovery with seawater and enhanced recovery with surfactant solutions. The plugs had porosity between 29.6 and 32.0%, with average effective permeability to water of 83 mD. The PJN surfactant, at a concentration 1000% above CMC in water, had a higher recovery factor, causing the original oil in place to be recovered by an extra 20.97%, after conventional recovery with seawater

Estudo da incorporação de resíduo industrial polimérico ao CAP

This work presents the incorporation of an industrial polymeric waste into a petroleum asphalt cement with penetration grade 50-60 (CAP 50-60). The main goal of this research is the development of a polymer-modified asphalt, with improvements in its physical properties, in order to obtain a more resistant material to the traffic loads. Furthermore, the use of this polymeric waste will result in economic and environmental benefits. The CAP 50-60 used in this research was kindly supplied by LUBNOR Lubrificantes e Derivados de Petróleo do Nordeste (produced in Fazenda Belém Aracati - Ceará) and the industrial polymeric waste was provided by a button manufacturer industry, located in Rio Grande do Norte state. This polymeric waste represents an environmental problem due to its difficulty in recycling and disposal, being necessary the payment by the industry to a landfill. The difficulty in its reuse is for being this material a termofixed polymer, as a result, the button chips resulting from the molding process cannot be employed for the same purpose. The first step in this research was the characterization of the polymeric waste, using Differential Scanning Calorimetry (DSC) Infrared spectroscopy (IR spectroscopy), and Thermogravimetric analysis (TGA). Based on the results, the material was classified as unsaturated polyester. After, laboratory experiments were accomplished seeking to incorporate the polymeric waste into the asphalt binder according to a 23 experimental factorial design, using as main factors: the polymer content (2%, 7% and 14%), the temperature of the mixture (140 and 180 oC) and the reaction time (20 and 60 minutes). The characterization of the polymer-modified asphalt was accomplished by traditional tests, such as: penetration, ring and ball softening point, viscosity, ductility and flash point temperature. The obtained results demonstrated that the addition of the polymeric waste into the asphalt binder modified some of its physical properties. However, this addition can be considered as a feasible alternative for the use of the polymeric waste, which is a serious environmental and technological problem.

Efeito da chuva na eficiência de herbicidas aplicados em pós-emergência sobre corda-de-viola

O objetivo deste trabalho foi avaliar a influência da chuva na eficiência de herbicidas aplicados em pós-emergência em plantas de Ipomoea grandifolia. As plantas de I. grandifolia foram cultivadas em vasos plásticos com capacidade de 2,5 L, em casa de vegetação, com uma planta por vaso. O delineamento experimental utilizado foi o inteiramente casualizado, com quatro repetições, com os tratamentos dispostos em um esquema fatorial 7x8 (sete tratamentos químicos e oito períodos para ocorrência de chuva após a aplicação dos tratamentos). Os tratamentos químicos constaram da aplicação de glyphosate em cinco formulações comerciais (Roundup Original, Roundup WG, Roundup Transorb, Roundup Transorb R e Roundup Ultra) a 1.080 g e.a. ha-1, amônio-glufosinate (Finale) a 400 g i.a. ha-1 e 2,4-D (DMA 806) a 1.000 g e.a. ha-1 e de oito intervalos de tempo para simulação de uma chuva de 15 mm, com duração de cinco minutos: 15', 30', 1h, 2h, 4h, 6h, 8h após a aplicação dos tratamentos e uma testemunha sem chuva, Foram realizadas avaliações visuais de controle das plantas aos 7, 14, 21, 28 e 35 dias após a aplicação e, por ocasião da última avaliação, determinou-se a massa seca das plantas. A ocorrência de chuvas após a aplicação de 2,4-D não alterou a sua eficiência no controle das plantas de I. grandifolia; já os herbicidas amônio-glufosinate e glyphosate, em todas suas formulações testadas, apresentaram redução na eficiência de controle quando da ocorrência de chuvas em até oito horas após a aplicação dos tratamentos.

Efeito da idade e do repouso pós-colheita de frutos de pepino na semente armazenada

Para avaliar os efeitos da idade e do repouso pós-colheita de frutos de pepino (Cucumis sativus L.) de duas cultivares, Pérola (espinhos escuros) e Rubi (espinhos claros), sobre as alterações na qualidade fisiológica das sementes durante o armazenamento, conduziu-se um experimento em Botucatu, SP e Bandeirantes, PR, durante quatro anos. Os frutos foram colhidos desde os 15 ('Rubi') ou 20 ('Pérola') dias até 45 dias após a antese, permanecendo em repouso pós-colheita por 0, 5, 10 e 15 dias, antes da extração das sementes. Antes e após dois e três anos de armazenamento (sacos de papel em ambiente de laboratório), foram retiradas amostras para avaliação do potencial germinativo e do vigor. Os resultados revelaram que sementes imaturas, retiradas de frutos colhidos precocemente (até 30 dias após a antese) e sem repouso pós-colheita, perderam totalmente a capacidade germinativa no segundo ano de armazenamento. Sementes que apresentavam valores iniciais de germinação mais elevados, as colhidas de frutos maduros (com ou sem repouso pós-colheita) ou de imaturos (30 e 35 dias de idade) com 10 a 15 dias de repouso pós-colheita, mantiveram valores acima de 70% após três anos de armazenamento.

Tratamento hidrotérmico na manutenção da qualidade pós-colheita de maracujá-amarelo

Objetivando avaliar o efeito da temperatura de imersão na manutenção da qualidade pós-colheita de frutos de maracujá-amarelo, instalou-se na FCA/UNESP este experimento, composto pelos seguintes tratamentos: T1 (testemunha); T2 (35°C por 2 horas); T3 (35°C por 4 horas); T4 (43°C por 2 horas); T5 (43°C por 4 horas); T6 (53°C por 2 horas); T7 (53°C por 4 horas), sendo os frutos mantidos em câmaras BOD a 12 ± 1 °C e 80-90% UR. A cada três dias, foram retiradas amostras dos tratamentos para as seguintes análises: Grupo destrutivo - pH, firmeza, sólidos solúveis (SS), acidez titulável (AT), relação (SS/AT), rendimento de polpa e vitamina C; e para o grupo-controle determinaram-se perda de massa e coloração da casca. Com base nos resultados obtidos, os tratamentos hidrotérmicos dos frutos, com temperaturas menores, como é o caso do T2 e T3, apresentaram frutos com menor perda de massa, melhor manutenção da coloração, boa manutenção da firmeza da casca e teores razoáveis de vitamina C, enquanto as temperaturas mais elevadas causaram danos à aparência dos frutos (queima da casca) e reduziram os teores de vitamina C na polpa.

Avaliação da seletividade da mistura de oxyfluorfen e ametryne, aplicada em pré ou pós-emergência, a dez variedades de cana-deaçúcar (cana-planta)

O objetivo deste trabalho foi o de avaliar a seletividade da mistura de oxyfluorfen e ametryne, a dez cultivares de cana-de-açúcar. Utilizou-se as doses de 0,48 e 1,5 kg de i.a. / ha (2,0 e 3,0 l de p.c./ha), respectivamente. As cultivares utilizadas foram: RB 83-5089, RB 80-6043, RB 78-5148, RB 82-5336, RB 83-5486, RB 72-454, SP 79- 1011, SP 70-1143, SP 71-1406 e SP 80-1842. Os herbicidas, em mistura de tanque, foram aplicados em pré ou pós-emergência (5 e 29 dias após o plantio, respectivamente). As testemunhas de cada variedade foram capinadas manualmente. O plantio foi feito nos dias 24 e 25 /03/94. Nas parcelas com aplicação em préemergência verificou-se sintomas de intoxicação (avermelhamento e necrose) em 4,72% (RB 83-5089) a 14,58% (RB 82-5336) da área foliar da cultura; em pós-emergência os sintomas alcançaram entre 20,16% (SP 71-1406) e 45,44% (80-1842) da área foliar da cana. Com o crescimento da planta (a partir da oitava folha definitiva), as novas folhas emitidas não apresentaram sintomas de intoxicação. Não foram verificados efeitos dos herbicidas sobre o crescimento (emissão de folhas e altura das plantas), perfilhamento, produtividade e características tecnológicas dos colmos obtidos.

Estádios de colheita e repouso pós-colheita dos frutos na qualidade de sementes de mamoneira

O presente trabalho teve como objetivo avaliar o efeito dos estádios de colheita e do repouso pós-colheita dos frutos na qualidade de sementes de mamoneira (Ricinus communis L.) cultivar AL Guarany 2002. Foram avaliadas 9 épocas de colheita dos racemos, dos 30 até 142 dias após a antese (DAA), em intervalos de 14 dias e quatro condições de repouso: sem e com repouso de sete dias de sementes extraídas (nuas), de frutos e de frutos presos ao racemo. Foram avaliados a cor de frutos e de sementes; o teor de água, a massa seca, as porcentagens de germinação e de vigor das sementes (primeira contagem de germinação, índice de velocidade de emergência e condutividade elétrica). Sementes com máxima qualidade fisiológica e massa seca foram obtidas de frutos colhidos aos 86 DAA. A colheita pode ser realizada até os 128 DAA sem redução da germinação, mas com prejuízos devido à queda dos frutos, dispersão das sementes aos 100 dias e reduções do vigor. O repouso permitiu a antecipação da colheita para 72 DAA sem prejuízos à germinação e massa seca, mas com reduções de vigor. A cor dos frutos, das sementes e o teor de água das sementes são parâmetros eficientes para a identificação do ponto de colheita, principalmente se usados conjuntamente.

Seletividade de herbicidas aplicados em pós-emergência sobre capim-braquiária

O estudo foi conduzido com o objetivo de avaliar a seletividade de alguns herbicidas inibidores de ALS e FS II aplicados em pós-emergência em plantas de Brachiaria brizantha cv. Marandu e Brachiaria decumbens cv. Basilisk em condições de campo e seu efeito na qualidade das sementes. Os herbicidas testados (em g/ha) foram: imazethapyr a 100; chlorimuronethyl a 15; nicosulfuron a 50; bentazon a 720; e atrazine a 3.000, além de uma testemunha, sem aplicação de herbicidas. Dois experimentos em campo foram instalados em delineamento em blocos casualizados com quatro repetições e os ensaios de laboratório em delineamento inteiramente casualizado, com 16 repetições. Todos os herbicidas testados tiveram algum efeito de fitointoxicação visual aos cultivares avaliados. O nicosulfuron foi o herbicida que visualmente proporcionou os níveis mais elevados de injúrias às plantas de B. decumbens e B. brizantha. A produção de MS de B. brizantha nos estádios iniciais de crescimento foi reduzida pelos herbicidas nicosulfuron e atrazine, enquanto, em B. decumbens, apenas o herbicida nicosulfuron ocasionou redução da produção de MS. A qualidade das sementes de ambos os cultivares foi afetada pelo nicosulfuron, que induziu a dormência em sementes de B. decumbens, reduziu a porcentagem de sementes normais e, assim como o atrazine, aumentou a porcentagem de sementes mortas.

Propriedades cerâmicas e imobilização do manganês em cerâmica estrutural

In this work is the addition of a metallic ion, of the metal Manganese, in a clay of Rio Grande do Norte state for structural ceramics use, the objective this study was to assess the evolution of ceramic properties. The clay was characterized by Chemical and Thermal analysis and Xray difraction. The metallic ion was added in the clay as aqueous solutions at concentrations of 100, 150 and 200 mg / L. The molded by extrusion and the burned were temperatures at 850, 950, 1050 and 1150 º C. Was made Chemical Analysis and investigated the following parameters environmental and ceramic: Solubility, Colour, Linear Retraction (%), Water Absorption (%), Gresification Curves, Apparent Porosity (%), Apparent Specific Mass (g/cm3) and Flexion Rupture Module (kgf/cm2). The results showed that increasing the concentration of metallic ion, properties such as Apparent Porosity (%), Water Absorption (%) decreases and the Flexion Rupture Module (kgf/cm2) increases with increasing temperature independent of the concentration of the ion. The gresification curves showed that the optimum firing temperatures were in the range between 950 and 1050 ° C. The evaluation of the properties showed that the ceramic material can be studied its use in solid brick and ceramic materials with structural function of filling. The results of solubility showed that the addition of ion offers no risk to the environment

Avaliação da temperatura de cristalização da parafina em sistemas: parafina, solvente e tensoativo

The formation of paraffin deposits is common in the petroleum industry during production, transport and treatment stages. It happens due to modifications in the thermodynamic variables that alter the solubility of alkanes fractions present in petroleum. The deposition of paraffin can provoke significant and growing petroleum losses, arriving to block the flow, hindering to the production. This process is associated with the phases equilibrium L-S and the stages and nucleation, growth and agglomeration the crystals. That process is function of petroleum intrinsic characteristics and temperature and pressure variations, during production. Several preventive and corrective methods are used to control the paraffin crystallization, such as: use of chemical inhibitors, hot solvents injection, use of termochemistry reactions, and mechanical removal. But for offshore exploration this expensive problem needs more investigation. Many studies have been carried through Wax Appearance Temperature (WAT) of paraffin; therefore the formed crystals are responsible for the modification of the reologics properties of the oil, causing a lot off operational problems. From the determination of the WAT of a system it is possible to affirm if oil presents or not trend to the formation of organic deposits, making possible to foresee and to prevent problems of wax crystallization. The solvent n-paraffin has been widely used as fluid of perforation, raising the production costs when it is used in the removal paraffin deposits, needing an operational substitute. This study aims to determine the WAT of paraffin and the interference off additives in its reduction, being developed system paraffin/solvent/surfactant that propitiates the wax solubilization. Crystallization temperatures in varied paraffin concentrations and different solvents were established in the first stage of the experiments. In the second stage, using the methodology of variation of the photoelectric signal had been determined the temperature of crystallization of the systems and evaluated the interferences of additives to reduction of the WAT. The experimental results are expressed in function of the variations of the photoelectric signals during controlled cooling, innovating and validating this new methodology to determine WAT, relatively simple with relation the other applied that involve specific equipments and of high cost. Through the curves you differentiate of the results had been also identified to the critical stages of growth and agglomeration of the crystals that represent to the saturation of the system, indicating difficulties of flow due to the increase of the density

Preparação e caracterização de um material híbrido, à base de vermiculita modificada com quitosana, para a remoção de íons de chumbo presentes em efluentes sintéticos

Actually, surveys have been developed for obtaining new materials and methodologies that aim to minimize environmental problems due to discharges of industrial effluents contaminated with heavy metals. The adsorption has been used as an alternative technology effectively, economically viable and potentially important for the reduction of metals, especially when using natural adsorbents such as certain types of clay. Chitosan, a polymer of natural origin, present in the shells of crustaceans and insects, has also been used for this purpose. Among the clays, vermiculite is distinguished by its good ion exchange capacity and in its expanded form enhances its properties by greatly increasing its specific surface. This study aimed to evaluate the functionality of the hybrid material obtained through the modification of expanded vermiculite with chitosan in the removal of lead ions (II) in aqueous solution. The material was characterized by infrared spectroscopy (IR) in order to evaluate the efficiency of modification of matrix, the vermiculite, the organic material, chitosan. The thermal stability of the material and the ratio clay / polymer was evaluated by thermogravimetry. To evaluate the surface of the material was used in scanning electron microscopy (SEM) and (BET). The BET analysis revealed a significant increase in surface area of vermiculite that after interaction with chitosan, was obtained a value of 21, 6156 m2 / g. Adsorption tests were performed according to the particle size, concentration and time. The results show that the capacity of removal of ions through the vermiculite was on average 88.4% for lead in concentrations ranging from 20-200 mg / L and 64.2% in the concentration range of 1000 mg / L. Regarding the particle size, there was an increase in adsorption with decreasing particle size. In fuction to the time of contact, was observed adsorption equilibrium in 60 minutes with adsorption capacity. The data of the isotherms were fitted to equation Freundlich. The kinetic study of adsorption showed that the pseudo second- order model best describes the adsorption adsorption, having been found following values K2=0,024 g. mg-1 min-1and Qmax=25,75 mg/g, value very close to the calculated Qe = 26.31 mg / g. From the results we can conclude that the material can be used in wastewater treatment systems as a source of metal ions adsorbent due to its high adsorption capacity

Aplicação de ultrassons no deslocamento de petróleo em meio poroso

The objective of this study was to evaluate the displacement of petroleum/diesel solutions, at different concentrations, observing the effect of ultrasonic vibrations in fluids present in porous media to obtain an increase in oil production. The bubbles produced by ultrasound implode asymmetrically in the rock, generating liquid jets with high speed, displacing the oil present in porous media. The oil/diesel solutions were prepared with concentrations ranging from 20 g/L to 720 g/L in oil in relation to diesel and its viscosities were obtained in a Brookfield Rheometer RS2000, with temperature ranging from 25 to 55 °C. After, calculations were performed to obtain the activation energy data for oil/diesel solutions. For oil recovery experiments, cylindrical samples of porous rock (core samples), with resin around the perimeter and its two circular bases free to allow the passage of fluids, were first saturated with 2% KCl solution and after with oil solutions. The results of oil extraction were satisfactory for all studied solutions, being obtained up to 68% partial displacement with saline solution injection. The ultrasound system was used after saline injection, increasing oil displacement, with oil extractions ranging from 63% to 79%. During the experiments, it was observed the warming of core samples, helping to reduce the viscosity of more concentrated systems, and consequently enhancing the percentage of advanced recovery for all studied solutions