958 resultados para Microeconomic Analyses of Economic Development
Resumo:
[eng] We analyze the equilibrium of a multi-sector exogenous growth model where the introduction of minimum consumption requirements drives structural change. We show that equilibrium dynamics simultaneously exhibt structural change and balanced growth of aggregate variables as is observed in US when the initial intensity of minimum consumption requirements is sufficiently small. This intensity is measured by the ratio between the aggregate value of the minimum consumption requirements and GDP and, therefore, it is inversely related with the level of economic development. Initially rich economies benefit from an initially low intensity of the minimum consumption requirements and, as a consequence, these economies end up exhibiting balanced growth of aggregate variables, while there is structural change. In contrast, initially poor economies suffer from an initially large intensity of the minimum consumption requirements, which makes the growth of the aggregate variables unbalanced during a very large period. These economies may never exhibit simultaneously balanced growth of aggregate variables and structural change.
Resumo:
Ohjelmistojen tärkeys nykypäivän yhteiskunnalle kasvaa jatkuvasti. Monia ohjelmistoprojekteja vaivaavat ongelmat aikataulussa pysymisestä, korkean tuottavuuden ylläpitämisestä ja riittävän korkeasta laadusta. Ohjelmistokehitysprosessien parantamisessa on naiden ongelmien minimoimiseksi tehty suuria investointeja. Investointien syynä on ollut olettamus ohjelmistokehityksen kapasiteetin suora riippuvuus tuotteen laadusta. Tämän tutkimuksen tarkoituksena oli tutkia Ohjelmistokehitysprosessien parantamisen mahdollisuuksia. Olemassaolevat ohjelmistokehityksen ja Ohjelmistokehitysprosessin parantamisen mallit, tekniikat ja metodologiat esiteltiin. Esiteltyjen mallien, tekniikoiden ja metodologioiden soveltuvuus analysoitiin ja suositus mallien käytöstä annettiin.
Resumo:
This thesis studies evaluation of software development practices through an error analysis. The work presents software development process, software testing, software errors, error classification and software process improvement methods. The practical part of the work presents results from the error analysis of one software process. It also gives improvement ideas for the project. It was noticed that the classification of the error data was inadequate in the project. Because of this it was impossible to use the error data effectively. With the error analysis we were able to show that there were deficiencies in design and analyzing phases, implementation phase and in testing phase. The work gives ideas for improving error classification and for software development practices.
Resumo:
Open Innovation is a relatively new concept which involves a change of paradigm in the R+D+i processes of companies whose aim is to create new technologies or new processes. If to this change, we add the need for innovation in the new green and sustainability economy, and we set out to create a collaborative platform with a learning space where this can happen, we will be facing an overwhelming challenge which requires the application of intelligent programming technologies and languages at the service of education.The aim of the Green IDI (Green Open Innovation) ¿ Economic development and job creation vector in SMEs, based on the environment and sustainability project is to create a platform where companies and individual researchers can perform open innovation processes in the field of sustainability and the environment.The Green IDI (Green Open Innovation) project is funded under the program INNPACTO by the Ministry of Science and Innovation of Spain and is being developed through a consortium formed by the following institutions: GRUPO ICA; COMPARTIA; GRUPO INTERCOM; CETAQUA and the Instituto de Investigación en Inteligencia Artificial (IIIA) from Consejo Superior de Investigaciones Científicas (CSIC). Also the consortium include FUNDACIÓ PRIVADA BARCELONA DIGITAL; PIMEC and UNIVERSITAT OBERTA DE CATALUNYA (UOC).Sustainability and positive action for the environment are considered the principle vector of economic development for companies. As Nicolás Scoli says (2007) ¿in short, preventing unnecessary consumption and the efficient consumption of resources means producing greater wealth with less. Both effects lead to reduced pollution linked to production and consumption¿.The Spanish Sustainable Development Strategy (EEDS) plan defends consumption and sustainable production linked to social and economic development by adhering to the commitment not to endanger ecosystems and abolishing the idea that economic growth is directly proportional to the deterioration of the environment.Uniting the Open Innovation and New Green Economy concepts leads to the "Green Open Innovation¿ Platform creation project.This article analyses the concept of open innovation and defines the importance of the new green and sustainable economy. Lastly, it proposes the creation of eLab. The eLab is defined as an Open Green Innovation Platform personal and collaborative education space which is fed by the interactions of users and which enables innovation processes based on new green economy concepts to be carried out.The creation of a personal learning environment such as eLab on the Green Open Innovation Platform meets the need to offer a collaborative space where platform users can improve their skills regarding the environment and sustainability based on collaborative synergies through Information and Communication Technologies.
Resumo:
The spatial distribution of economic activity has often been analysed for wide geographical areas such as regions or metropolitan areas, but it has rarely been subject to microanalysis, especially outside the U.S. In this paper we focus on what happens within a large European city (Par is), and analyse how the industrial composition of its districts differs and how these districts evolve. We also analyse suburbanization process for both residents and the workforce and provide empirical evidence about the changing roles of the core and intramuros periphery. Keywords: agglomeration, suburbanization, Paris, micropolitan analysis
Resumo:
The front end of innovation is regarded as one of the most important steps in building new software products or services, and the most significant benefits in software development can be achieved through improvements in the front end activities. Problems in the front end phase have an impact on customer dissatisfaction with delivered software, and on the effectiveness of the entire software development process. When these processes are improved, the likelihood of delivering high quality software and business success increases. This thesis highlights the challenges and problems related to the early phases of software development, and provides new methods and tools for improving performance in the front end activities of software development. The theoretical framework of this study comprises two fields of research. The first section belongs to the field of innovation management, and especially to the management of the early phases of the innovation process, i.e. the front end of innovation. The second section of the framework is closely linked to the processes of software engineering, especially to the early phases of the software development process, i.e. the practice of requirements engineering. Thus, this study extends the theoretical knowledge and discloses the differences and similarities in these two fields of research. In addition, this study opens up a new strand for academic discussion by connecting these research directions. Several qualitative business research methodologies have been utilized in the individual publications to solve the research questions. The theoretical and managerial contribution of the study can be divided into three areas: 1) processes and concepts, 2) challenges and development needs, and 3) means and methods for the front end activities of software development. First, the study discloses the difference and similarities between the concepts of the front end of innovation and requirements engineering, and proposes a new framework for managing the front end of the software innovation process, bringing business and innovation perspectives into software development. Furthermore, the study discloses managerial perceptions of the similarities and differences in the concept of the front end of innovation between the software industry and the traditional industrial sector. Second, the study highlights the challenges and development needs in the front end phase of software development, especially challenges in communication, such as linguistic problems, ineffective communication channels, a communication gap between users/customers and software developers, and participation of multiple persons in software development. Third, the study proposes new group methods for improving the front end activities of software development, especially customer need assessment, and the elicitation of software requirements.
Resumo:
This study represents an integrated approach towards understanding the electronic and structural aspects of 2-benzylamino-1,4-naphthalenedione, a representative 2-amino-napfthoquinone. To this end, theoretical calculations performed at the B3PW91/6-31+G(d) level of density functional theory, electrochemical and X-ray structural investigation were employed. Two intramolecular H-bonds and other two intermolecular H-bonds were observed, including non-classical interactions. Cyclic voltammogram (CV) and differential pulse voltammetry (DPV) show two pairs of peaks, being each one a monoelectronic process.
Resumo:
The underlying cause of many human autoimmune diseases is unknown, but several environmental factors are implicated in triggering the self-destructive immune reactions. Multiple Sclerosis (MS) is a chronic autoimmune disease of the central nervous system, potentially leading to persistent neurological deterioration. The cause of MS is not known, and apart from immunomodulatory treatments there is no cure. In the early phase of the disease, relapsing-remitting MS (RR-MS) is characterized by unpredictable exacerbations of the neurological symptoms called relapses, which can occur at different intervals ranging from 4 weeks to several years. Microbial infections are known to be able to trigger MS relapses, and the patients are instructed to avoid all factors that might increase the risk of infections and to properly use antibiotics as well as to take care of dental hygiene. Among those environmental factors which are known to increase susceptibility to infections, high ambient air inhalable particulate matter levels affect all people within a geographical region. During the period of interest in this thesis, the occurrence of MS relapses could be effectively reduced by injections of interferon, which has immunomodulatory and antiviral properties. In this thesis, ecological and epidemiological analyses were used to study the possible connection between MS relapse occurrence, population level viral infections and air quality factors, as well as the effects of interferon medication. Hospital archive data were collected retrospectively from 1986-2001, a period in time ranging from when interferon medication first became available until just before other disease-modifying MS therapies arrived on the market. The grouped data were studied with logistic regression and intervention analysis, and individual patient data with survival analysis. Interferons proved to be effective in the treatment of MS in this observational study, as the amount of MS exacerbations was lower during interferon use as compared to the time before interferon treatment. A statistically significant temporal relationship between MS relapses and inhalable particular matter (PM10) concentrations was found in this study, which implies that MS patients are affected by the exposure to PM10. Interferon probably protected against the effect of PM10, because a significant increase in the risk of exacerbations was only observed in MS patients without interferon medication following environmental exposure to population level specific viral infections and PM10. Apart from being antiviral, interferon could thus also attenuate the enhancement of immune reactions caused by ambient air PM10. The retrospective approach utilizing carefully constructed hospital records proved to be an economical and reliable source of MS disease information for statistical analyses.
Resumo:
Rhizoctonia solani isolates obtained from common beans (Phaseolus vulgaris) grown in the mountainous Atlantic Rainforest (Mata Atlântica) region of São Paulo, Brazil, were analyzed to determine their genetic diversity using internal transcribed spacer (ITS), microsatellite and telomere sequence-based PCR primers. Restriction digestion of the ITS1/5.8S/ITS2 ribosomal regions yielded unique banding patterns specific for AG4 and its subgroups. The ITS restriction digestion (ITS/RFLP), telomere and microsatellite primers identified five to 11 genotypes within the isolates of R. solani. While all isolates were pathogenic on beans, there was no correlation found between genotypic differences and pathogenicity. The different PCR primers revealed a number of isolates that were genetically similar. Some of these genetic groups were supported by more than one of the primers utilized in this study, thus confirming their relationship.
Resumo:
Reverse transcriptase (RT) sequence analysis is an important technique used to detect the presence of transposable elements in a genome. Putative RT sequences were analyzed in the genome of the pathogenic fungus C. perniciosa, the causal agent of witches' broom disease of cocoa. A 394 bp fragment was amplified from genomic DNA of different isolates of C. perniciosa belonging to C-, L-, and S-biotypes and collected from various geographical areas. The cleavage of PCR products with restriction enzymes and the sequencing of various RT fragments indicated the presence of several sequences showing transition events (G:C to A:T). Southern blot analysis revealed high copy numbers of RT signals, forming different patterns among C-, S-, and L-biotype isolates. Sequence comparisons of the predicted RT peptide indicate a close relationship with the RT protein from thegypsy family of LTR-retrotransposons. The possible role of these retrotransposons in generating genetic variability in the homothallic C. perniciosa is discussed.
Resumo:
The size and complexity of projects in the software development are growing very fast. At the same time, the proportion of successful projects is still quite low according to the previous research. Although almost every project's team knows main areas of responsibility which would help to finish project on time and on budget, this knowledge is rarely used in practice. So it is important to evaluate the success of existing software development projects and to suggest a method for evaluating success chances which can be used in the software development projects. The main aim of this study is to evaluate the success of projects in the selected geographical region (Russia-Ukraine-Belarus). The second aim is to compare existing models of success prediction and to determine their strengths and weaknesses. Research was done as an empirical study. A survey with structured forms and theme-based interviews were used as the data collection methods. The information gathering was done in two stages. At the first stage, project manager or someone with similar responsibilities answered the questions over Internet. At the second stage, the participant was interviewed; his or her answers were discussed and refined. It made possible to get accurate information about each project and to avoid errors. It was found out that there are many problems in the software development projects. These problems are widely known and were discussed in literature many times. The research showed that most of the projects have problems with schedule, requirements, architecture, quality, and budget. Comparison of two models of success prediction presented that The Standish Group overestimates problems in project. At the same time, McConnell's model can help to identify problems in time and avoid troubles in future. A framework for evaluating success chances in distributed projects was suggested. The framework is similar to The Standish Group model but it was customized for distributed projects.
Resumo:
One filler often utilized in flexible polyurethane foams is calcium carbonate (CaCO3) because it is non-abrasiveness, non-toxicity and facilitated pigmentation. However, it is observed that the excess of commercial CaCO3 utilized in industry possibly causing permanent deformations and damaging the quality of the final product. The effect of different concentrations of commercial CaCO3, in flexible foams, was studied. Different concentrations of CaCO3 were used for the synthesis of flexible polyurethane foams, which were submitted to morphological and thermal analyses to verify the alterations provoked by the progressive introduction of this filler.