Retrospective Voting in Turkey: Macro and Micro Perspectives

Recent studies have shown that party systems in emerging democracies do not always adequately reflect the various cleavages of society. Under such circumstances, retrospective voting may play a more important role than cleavage voting in determining electoral outcomes. For studies of retrospective voting, the choice between macro and micro level as the independent variable is a major methodological issue. Using individual-level data on Turkey, this paper addresses two major questions: (1) Are voters' decisions based on household economic conditions or national economic conditions? Do sociopolitical conditions also count? (2) Does the future evaluation of the economy affect voting decisions apart from past evaluation? Logit models are used in this research to answer these questions.

Unlocking the Potential of Zambian Micro, Small and Medium Enterprises "Learning from the international best practices - the Southeast Asian Experience"

This paper examines the SMEs performance in Zambia and attempts to identify some practical lessons that Zambia can learn from Southeast Asian countries (with reference to Malaysia) in order to facilitate industrial development through unlocking the potential of its SMEs sector. Malaysia and Zambia were at the same level of economic development as evidenced by similar per capita incomes but Zambia has remained behind economically and its manufacturing sector has stagnated as if both countries did not have similar initial endowments. It therefore, becomes imperative that Zambia learns from such countries on how they managed to take-off economically with a focus on SME development. Training (education), research & development, market availability and technological advancement through establishment of industrial linkages coupled with cluster formation were some of the outstanding strategies identified that Zambia could use as a “key” to unlock its SMEs’ potential as it strives to meet the UN MDGs in particular halving its poverty levels by 2015 and also realizing its vision of becoming a middle income earner by 2030.

Restoration of micro data of John Lossing Buck's survey and analysis of the inverse relationship between yield and farm size in rural China in the 1930's

A large scale Chinese agricultural survey was conducted at the direction of John Lossing Buck from 1929 through 1933. At the end of the 1990’s, some parts of the original micro data of Buck’s survey were discovered at Nanjing Agricultural University. An international joint study was begun to restore micro data of Buck’s survey and construct parts of the micro database on both the crop yield survey and special expenditure survey. This paper includes a summary of the characteristics of farmlands and cropping patterns in crop yield micro data that covered 2,102 farmers in 20 counties of 9 provinces. In order to test the classical hypothesis of whether or not an inverse relationship between land productivity and cultivated area may be observed in developing countries, a Box-Cox transformation test was conducted for functional forms on five main crops of Buck’s crop yield survey. The result of the test shows that the relationship between land productivity and cultivated areas of wheat and barley is linear and somewhat negative; those of rice, rapeseed, and seed cotton appear to be slightly positive. It can be tentatively concluded that the relationship between cultivated area and land productivity are not the same among crops, and the difference of labor intensity and the level of commercialization of each crop may be strongly related to the existence or non-existence of inverse relationships.

Seasonal migration and micro-credit in the lean period : evidence from northwest Bangladesh

This paper investigates the relationship between access to micro-credit and temporary seasonal migration, an issue which is largely ignored in the standard rural-urban migration literature. Seasonal migration due to agricultural downturns is a common phenomenon in developing countries. Using primary data from a cross-sectional household survey from the northwest part of Bangladesh, this study quantifies the factors that influence such migration decisions. Among other results, we find that network effects play a significant role in influencing the migration decision, with the presence of kinsmen at the place of destination having considerable impact. Seasonal migration is a natural choice for individual suffering periodic hardship; however the strict weekly loan repayment rules of Micro-credit Institutes can have an adverse effect on this process, reducing the ability of borrowers to react to a shock. Our result suggests that poor individuals prefer the option of not accessing the micro-credit and opt for temporal seasonal migration during the lean period. The results have numerous potential policy implications, including the design of typical micro-credit schemes.

UV laser-induced high resolution cleaving of Si wafers for micro-nano devices and polymeric waveguide characterization

In this work we propose a method for cleaving silicon-based photonic chips by using a laser based micromachining system, consisting of a ND:YVO4laser emitting at 355 nm in nanosecond pulse regime and a micropositioning system. The laser makes grooved marks placed at the desired locations and directions where cleaves have to be initiated, and after several processing steps, a crack appears and propagate along the crystallographic planes of the silicon wafer. This allows cleavage of the chips automatically and with high positioning accuracy, and provides polished vertical facets with better quality than the obtained with other cleaving process, which eases the optical characterization of photonic devices. This method has been found to be particularly useful when cleaving small-sized chips, where manual cleaving is hard to perform; and also for polymeric waveguides, whose facets get damaged or even destroyed with polishing or manual cleaving processing. Influence of length of the grooved line and speed of processing is studied for a variety of silicon chips. An application for cleaving and characterizing sol–gel waveguides is presented. The total amount of light coupled is higher than when using any other procedure.

Development of a grid connected micro wind generator. A practical activity for the course on electric generation with wind energy

This paper describes a practical activity, part of the renewable energy course where the students have to build their own complete wind generation system, including blades, PM-generator, power electronics and control. After connecting the system to the electric grid the system has been tested during real wind scenarios. The paper will describe the electric part of the work surface-mounted permanent magnet machine design criteria as well as the power electronics part for the power control and the grid connection. A Kalman filter is used for the voltage phase estimation and current commands obtained in order to control active and reactive power. The connection to the grid has been done and active and reactive power has been measured in the system.

Is it appropriate protective figure "Plant Micro-Reserves" to protect tree species? The example of Betula pendula subsp. fontqueri in "La Garganta de los Caballeros" (Ávila)

The figure of protection "micro-reserves" was created in the Region of Valencia (ANONYMOUS, 1994) with the aim of protecting endangered plant species. This is one of the areas of greatest floristic richness and uniqueness of the western Mediterranean. In this area rare, endemic or threatened vascular flora has a peculiar distribution: they appear to form small fragments spread over the entire region (LAGUNA, 1994; LAGUNA, 2001) The protection of every these small populations of great scientific value has significant challenges. It doesn´t try to protect every species that set out in Annex IV of the by then existing Law 4 / 1989 (repealed in 2007), or to protect to the most ecological level with the creation of Natural Protected Area but an intermediate level: the plant community of small size. According to the decree: “as Micro-Reserve will be declared the natural parcels of land under 20 hectares that contain a high concentration of rare plants, endemic, threatened or of high scientific interest” (ANONYMOUS, 1994) . Of course, the statement of an area as micro-reserve carries certain prohibitions that are harmful to the vegetal community

Hydration of C3S, C2S and their Blends. Micro- and Nanoscale Characterization

This study forms part of wider research conducted under a EU 7 th Framework Programme (COmputationally Driven design of Innovative CEment-based materials or CODICE). The ultimate aim is the multi-scale modelling of the variations in mechanical performance in degraded and non-degraded cementitious matrices. The model is being experimentally validated by hydrating the main tri-calcium silicate (T1-C3S) and bi-calcium silicate (β-C2S), phases present in Portland cement and their blends. The present paper discusses micro- and nanoscale studies of the cementitious skeletons forming during the hydration of C3S, C2S and 70 % / 30 % blends of both C3S/C2S and C2S/C3S with a water/cement ratio of 0.4. The hydrated pastes were characterized at different curing ages with 29 Si NMR, SEM/TEM/EDS, BET, and nanoindentation. The findings served as a basis for the micro- and nanoscale characterization of the hydration products formed, especially C-S-H gels. Differences were identified in composition, structure and mechanical behaviour (nanoindentation), depending on whether the gels formed in C3S or C2S pastes. The C3S gels had more compact morphologies, smaller BET-N2 specific surface area and lesser porosity than the gels from C2S-rich pastes. The results of nanoindentation tests appear to indicate that the various C-S-H phases formed in hydrated C3S and C2S have the same mechanical properties as those formed in Portland cement paste. Compared to the C3S sample, the hydrated C2S specimen was dominated by the loose-packed (LP) and the low-density (LD) C-S-H phases, and had a much lower content of the high density (HD) C-S-H phase

Influencia de la adición de zeolita en las propiedades micro y macroestructurales en pastas y morteros.

Las adiciones activas en los hormigones son cada día más usuales, no solo debido a razones económicas, sino porque los efectos que se desarrollan son beneficiosos para las prestaciones del hormigón, léase durabilidad y resistencias mecánicas. En Cuba ha sido frenada al no existir fuentes como las tradicionalmente conocidas y comercializadas como es cenizas volantes y las micro sílices (silica fume o fly ash). El desarrollo de estudios de algunos minerales industriales nacionales de génesis ígnea como los vidrios volcánicos, tobas vítreas o zeolitas han demostrado su actividad puzolánica. Es conocido que la zeolita tiene actividad puzolánica desde la época romana, y actualmente se utilizan en el mundo para la producción de cementos mezclados, sin embargo la experiencia cubana es el precedente de su uso como adición activa a hormigones. Se han realizado investigaciones a diferentes escalas del uso de adiciones de zeolita en tecnologías de prefabricado, premezclado y pretensado que han demostrado las mejoras en las prestaciones. El presente trabajo explica el aumento de las prestaciones antes demostradas mediante el estudio de los cambios microestructurales, tanto de composición química como en la morfología de los productos de hidratación formados, a partir de análisis por microscopia electrónica de barrido y microanálisis por espectroscopia de dispersión de energía de rayos X en pasta de cemento y cemento + zeolita comparativamente.

Differential Micro RNA Expression in PBMC from Multiple Sclerosis Patients

Differences in gene expression patterns have been documented not only in Multiple Sclerosis patients versus healthy controls but also in the relapse of the disease. Recently a new gene expression modulator has been identified: the microRNA or miRNA. The aim of this work is to analyze the possible role of miRNAs in multiple sclerosis, focusing on the relapse stage. We have analyzed the expression patterns of 364 miRNAs in PBMC obtained from multiple sclerosis patients in relapse status, in remission status and healthy controls. The expression patterns of the miRNAs with significantly different expression were validated in an independent set of samples. In order to determine the effect of the miRNAs, the expression of some predicted target genes of these were studied by qPCR. Gene interaction networks were constructed in order to obtain a co-expression and multivariate view of the experimental data. The data analysis and later validation reveal that two miRNAs (hsa-miR-18b and hsa-miR-599) may be relevant at the time of relapse and that another miRNA (hsa-miR-96) may be involved in remission. The genes targeted by hsa-miR-96 are involved in immunological pathways as Interleukin signaling and in other pathways as wnt signaling. This work highlights the importance of miRNA expression in the molecular mechanisms implicated in the disease. Moreover, the proposed involvement of these small molecules in multiple sclerosis opens up a new therapeutic approach to explore and highlight some candidate biomarker targets in MS