Robust heuristics for scalable optimization of complex SQL queries

Modern database systems incorporate a query optimizer to identify the most efficient "query execution plan" for executing the declarative SQL queries submitted by users. A dynamic-programming-based approach is used to exhaustively enumerate the combinatorially large search space of plan alternatives and, using a cost model, to identify the optimal choice. While dynamic programming (DP) works very well for moderately complex queries with up to around a dozen base relations, it usually fails to scale beyond this stage due to its inherent exponential space and time complexity. Therefore, DP becomes practically infeasible for complex queries with a large number of base relations, such as those found in current decision-support and enterprise management applications. To address the above problem, a variety of approaches have been proposed in the literature. Some completely jettison the DP approach and resort to alternative techniques such as randomized algorithms, whereas others have retained DP by using heuristics to prune the search space to computationally manageable levels. In the latter class, a well-known strategy is "iterative dynamic programming" (IDP) wherein DP is employed bottom-up until it hits its feasibility limit, and then iteratively restarted with a significantly reduced subset of the execution plans currently under consideration. The experimental evaluation of IDP indicated that by appropriate choice of algorithmic parameters, it was possible to almost always obtain "good" (within a factor of twice of the optimal) plans, and in the few remaining cases, mostly "acceptable" (within an order of magnitude of the optimal) plans, and rarely, a "bad" plan. While IDP is certainly an innovative and powerful approach, we have found that there are a variety of common query frameworks wherein it can fail to consistently produce good plans, let alone the optimal choice. This is especially so when star or clique components are present, increasing the complexity of th- e join graphs. Worse, this shortcoming is exacerbated when the number of relations participating in the query is scaled upwards.

Food biotechnologies in Italy: a social psychological study

This dissertation presents an analysis of the representations of food biotechnologies in Italy. The thesis uses the analysis of discourse to illustrate the articulated ways in which representations are instantiated in different contexts. The theoretical thrust of the work resides in its discussion of the basic tenets of both Social Representations Theory and Discursive Psychology. The thesis offers a detailed description of the two frameworks; affinities and difference are highlighted, and a serious effort is made to develop an integrated set of theoretical resources to answer the research questions. The thesis proposes to combine a discursive methodology with Social Representations Theory. After a description of the relevant legislative framework follows an illustration of the categories used for the textual analysis. The study proposes the textual analysis of the following data: the first declaration issued by a small Italian council rejecting biotechnologies; four texts which focus on positions taken by the Catholic Church in the matter of food biotechnologies; several transcripts from a public debate in a small community of the north west of Italy. The latter study, which included an ethnographic dimension, focuses on recordings from interviews, a focus group, a public meeting and newspaper articles. Particular attention is paid to ideological representations and to the relevance of citizenship and governance to debates about food biotechnologies.

The significance of brittle reaction layers in fusing of dental ceramics to titanium

This thesis comprises four intercomplementary parts that introduce new approaches to brittle reaction layers and mechanical compatibility of metalloceramic joints created when fusing dental ceramics to titanium. Several different methods including atomic layer deposition (ALD), sessile drop contact angle measurements, scanning acoustic microscopy (SAM), three-point bending (TPB, DIN 13 927 / ISO 9693), cross-section microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) were employed. The first part investigates the effects of TiO2 layer structure and thickness on the joint strength of the titanium-metalloceramic system. Samples with all tested TiO2 thicknesses displayed good ceramics adhesion to Ti, and uniform TPB results. The fracture mode was independent of oxide layer thickness and structure. Cracking occurred deeper inside titanium, in the oxygen-rich Ti[O]x solid solution surface layer. During dental ceramics firing TiO2 layers dissociate and joints become brittle with increased dissolution of oxygen into metallic Ti and consequent reduction in the metal plasticity. To accomplish an ideal metalloceramic joint this needs to be resolved. The second part introduces photoinduced superhydrophilicity of TiO2. Test samples with ALD deposited anatase TiO2 films were produced. Samples were irradiated with UV light to induce superhydrophilicity of the surfaces through a cascade leading to increased amount of surface hydroxyl groups. Superhydrophilicity (contact angle ~0˚) was achieved within 2 minutes of UV radiation. Partial recovery of the contact angle was observed during the first 10 minutes after UV exposure. Total recovery was not observed within 24h storage. Photoinduced ultrahydrophilicity can be used to enhance wettability of titanium surfaces, an important factor in dental ceramics veneering processes. The third part addresses interlayers designed to restrain oxygen dissolution into Ti during dental ceramics fusing. The main requirements for an ideal interlayer material are proposed. Based on these criteria and systematic exclusion of possible interlayer materials silver (Ag) interlayers were chosen. TPB results were significantly better in when 5 μm Ag interlayers were used compared to only Al2O3-blasted samples. In samples with these Ag interlayers multiple cracks occurred inside dental ceramics, none inside Ti structure. Ag interlayers of 5 μm on Al2O3-blasted samples can be efficiently used to retard formation of the brittle oxygen-rich Ti[O]x layer, thus enhancing metalloceramic joint integrity. The most brittle component in metalloceramic joints with 5 μm Ag interlayers was bulk dental ceramics instead of Ti[O]x. The fourth part investigates the importance of mechanical interlocking. According to the results, the significance of mechanical interlocking achieved by conventional surface treatments can be questioned as long as the formation of the brittle layers (mainly oxygen-rich Ti[O]x) cannot be sufficiently controlled. In summary in contrast to former impressions of thick titanium oxide layers this thesis clearly demonstrates diffusion of oxygen from sintering atmosphere and SiO2 to Ti structures during dental ceramics firing and the following formation of brittle Ti[O]x solid solution as the most important factors predisposing joints between Ti and SiO2-based dental ceramics to low strength. This among other predisposing factors such as residual stresses created by the coefficient of thermal expansion mismatch between dental ceramics and Ti frameworks can be avoided with Ag interlayers.

Global and EU governance for sustainable forest management with special reference to capacity building in Ethiopia and Southern Sudan

The purpose of this study was to produce information on and practical recommendations for informed decision-making on and capacity building for sustainable forest management (SFM) and good forest governance. This was done within the overall global framework for sustainable development with special emphasis on the EU and African frameworks and on Southern Sudan and Ethiopia in particular. The case studies on Southern Sudan and Ethiopia focused on local, national and regional issues. Moreover, this study attempted to provide both theoretical and practical new insight. The aim was to build an overall theoretical framework and to study its key contents and main implications for SFM and good forest governance at all administration levels, for providing new tools for capacity building in natural resources management. The theoretical framework and research approach were based on the original research problem and the general and specific aims of the study. The key elements of the framework encompass sustainable development, global and EU governance, sustainable forest management (SFM), good forest governance, as well as international and EU law. The selected research approach comprised matrix-based assessment of international, regional (EU and Africa) and national (Southern Sudan and Ethiopia) policy and legal documents. The specific case study on Southern Sudan also involved interviews and group discussions with local community members and government officials. As a whole, this study attempted to link the global, regional, national and local levels in forest-sector development and especially to analyse how the international policy development in environmental and forestry issues is reflected in field-level progress towards SFM and good forest governance, for the specific cases of Southern Sudan and Ethiopia. The results on Southern Sudan focused on the existing situation and perceived needs in capacity building for SFM and good forest governance at all administration levels. Specifically, the results of the case study on Southern Sudan presented the current situation in selected villages in the northern parts of Renk County in Upper Nile State, and the implications of Multilateral Environmental Agreements (MEAs) and of the new forest policy framework for capacity building actions. The results on Ethiopia focused on training, extension, research, education and new curriculum development within higher education institutions and particularly at the Wondo Genet College of Forestry and Natural Resources (WGCF-NR), which administratively lies under Hawassa University. The results suggest that, for both cases studies, informed decision-making on and capacity building for SFM and good forest governance require comprehensive, long-term, cross-sectoral, coherent and consistent approaches within the dynamic and evolving overall global framework, including its multiple inter-linked levels. The specific priority development and focus areas comprised the establishment of SFM and good forest governance in accordance with the overall sustainable development priorities and with more focus on the international trade in forest products that are derived from sustainable and legal sources with an emphasis on effective forest law enforcement and governance at all levels. In Upper Nile State in Southern Sudan there were positive development signals such as the will of the local people to plant more multipurpose trees on farmlands and range lands as well as the recognition of the importance of forests and trees for sustainable rural development where food security is a key element. In addition, it was evident that the local communities studied in Southern Sudan also wanted to establish good governance systems through partnerships with all actors and through increased local responsibilities. The results also suggest that the implementation of MEAs at the local level in Southern Sudan requires mutually supportive and coherent approaches within the agreements as well as significantly more resources and financial and technical assistance for capacity building, training and extension. Finally, the findings confirm the importance of full utilization of the existing local governance and management systems and their traditional and customary knowledge and practices, and of new development partnerships with full participation of all stakeholders. The planned new forest law for Southern Sudan, based on an already existing new forest policy, is expected to recognize the roles of local-level actors, and it would thus obviously facilitate the achieving of sustainable forest management.

Adoption processes for EDM, EDI and BIM technologies in the construction industry

Three strategically important uses of IT in the construction industry are the storage and management of project documents on webservers (EDM), the electronic handling of orders and invoices between companies (EDI) and the use of 3-D models including non-geometrical attributes for integrated design and construction (BIM). In a broad longitudinal survey study of IT use in the Swedish Construction Industry the extent of use of these techniques was measured in 1998, 2000 and 2007. The results showed that EDM and EDI are currently already well-established techniques whereas BIM, although it promises the biggest potential benefits to the industry, only seems to be at the beginning of adoption. In a follow-up to the quantitative studies, the factors affecting the decisions to implement EDM, EDI and BIM as well as the actual adoption processes, were studied using semi-structured interviews with practitioners. The theoretical basis for the interview studies was informed by theoretical frameworks from IT-adoption theory, where in particular the UTAUT model has provided the main basis for the analyses presented here. The results showed that the decisions to take the above technologies into use are made on three differ- ent levels: the individual level, the organizational level in the form of a company, and the organiza- tional level in the form of a project. The different patterns in adoption can to some part be explained by where the decisions are mainly taken. EDM is driven from the organisation/project level, EDI mainly from the organisation/company level, and BIM is driven by individuals pioneering the technique.

End-User Attitudes Towards EDM Use in Construction Project Work: Case Study

This article reports on a cross-sectional case study of a large construction project in which Electronic document management (EDM) was used. Attitudes towards EDM from the perspective of individual end users were investigated. Responses from a survey were combined with data from system usage log files to obtain an overview of attitudes prevalent in different user segments of the total population of 334 users. The survey was followed by semi-structured interviews with representative users. A strong majority of users from all segments of the project group considered EDM as a valuable aid in their work processes, despite certain functional limitations of the system used and the complexity of the information mass. Based on the study a model describing the key factors affecting end user EDM adoption is proposed. The model draws on insight from earlier studies of EDM enabled projects and theoretical frameworks on technology acceptance and success of information systems, as well as the insights gained from the case study.

On the discursive construction of success/failure in narratives of post-merger integration

This article concentrates on the discursive constmction of success and failure in narratives of post-merger integration. Drawing on extensive interview material from eight Finnish-Swedish mergers and acquisitions, the empirical analysis leads to distinguishing four types of discourse — 'rationalistic', 'cultural', 'role-bound' and 'individualistic' — that narrators employ in recounting their experiences. In particular, the empirical material illustrates how the discursive frameworks enable specific (di.scursive) strategies and moves for (re)framing the success/failure, justification/legitimization of one's own actions, and (re)constniction of responsibility when dealing with socio-psychological pressures associated with success/failtire. The analysis also suggests that, as a result of making use of these discursive strategies and moves, success stories are likely to lead to overly optimistic or, in the case of failure stories, overly pessimistic views on the management's ability to control these change processes. Tliese findings imply that we should take the discursive elements that both constrain our descriptions and explanations seriously, and provide opportunities for more or less intentional (re)interpretations of postmerger integration or other organizational change processes.

Customer asset management in action: using customers portfolio for allocating resources across business-to-business relationships for improved shareholder value

Suvi Nenonen Customer asset management in action: using customer portfolios for allocating resources across business-to-business relationships for improved shareholder value Customers are crucial assets to all firms as customers are the ultimate source of all cash flows. Regardless this financial importance of customer relationships, for decades there has been a lack of suitable frameworks explaining how customer relationships contribute to the firm financial performance and how this contribution can be actively managed. In order to facilitate a better understanding of the customer asset, contemporary marketing has investigated the use of financial theories and asset management practices in the customer relationship context. Building on this, marketing academics have promoted the customer lifetime value concept as a solution for valuating and managing customer relationships for optimal financial outcomes. However, the empirical investigation of customer asset management lags behind the conceptual development steps taken. Additionally, the practitioners have not embraced the use of customer lifetime value in guiding managerial decisions - especially in the business-to-business context. The thesis points out that there are fundamental differences between customer relationships and investment instruments as investment targets, effectively eliminating the possibility to use financial theories in a customer relationships context or to optimize the customer base as a single investment portfolio. As an alternative, the thesis proposes the use of customer portfolio approach for allocating resources across the customer base for improved shareholder value. In the customer portfolio approach, the customer base of a firm is divided into multiple portfolios based on customer relationships’ potential to contribute to the shareholder value creation. After this, customer management concepts are tailored to each customer portfolio, designed to improve the shareholder value in their own respect. Therefore, effective customer asset management with the customer portfolio approach necessitates that firms are able to manage multiple parallel customer management concepts, or business models, simultaneously. The thesis is one of the first empirical studies on customer asset management, bringing empirical evidence from multiple business-to-business case studies on how customer portfolio models can be formed, how customer portfolios can be managed, and how customer asset management has contributed to the firm financial performance.

Customer asset management in action: using customers portfolio for allocating resources across business-to-business relationships for improved shareholder value

Suvi Nenonen Customer asset management in action: using customer portfolios for allocating resources across business-to-business relationships for improved shareholder value Customers are crucial assets to all firms as customers are the ultimate source of all cash flows. Regardless this financial importance of customer relationships, for decades there has been a lack of suitable frameworks explaining how customer relationships contribute to the firm financial performance and how this contribution can be actively managed. In order to facilitate a better understanding of the customer asset, contemporary marketing has investigated the use of financial theories and asset management practices in the customer relationship context. Building on this, marketing academics have promoted the customer lifetime value concept as a solution for valuating and managing customer relationships for optimal financial outcomes. However, the empirical investigation of customer asset management lags behind the conceptual development steps taken. Additionally, the practitioners have not embraced the use of customer lifetime value in guiding managerial decisions - especially in the business-to-business context. The thesis points out that there are fundamental differences between customer relationships and investment instruments as investment targets, effectively eliminating the possibility to use financial theories in a customer relationships context or to optimize the customer base as a single investment portfolio. As an alternative, the thesis proposes the use of customer portfolio approach for allocating resources across the customer base for improved shareholder value. In the customer portfolio approach, the customer base of a firm is divided into multiple portfolios based on customer relationships’ potential to contribute to the shareholder value creation. After this, customer management concepts are tailored to each customer portfolio, designed to improve the shareholder value in their own respect. Therefore, effective customer asset management with the customer portfolio approach necessitates that firms are able to manage multiple parallel customer management concepts, or business models, simultaneously. The thesis is one of the first empirical studies on customer asset management, bringing empirical evidence from multiple business-to-business case studies on how customer portfolio models can be formed, how customer portfolios can be managed, and how customer asset management has contributed to the firm financial performance.

Collective Network Capability in International Project Business Networks - A Case Study of the Business Network for the Ashanti Electrification Project in Ghana

Despite thirty years of research in interorganizational networks and project business within the industrial networks approach and relationship marketing, collective capability of networks of business and other interorganizational actors has not been explicitly conceptualized and studied within the above-named approaches. This is despite the fact that the two approaches maintain that networking is one of the core strategies for the long-term survival of market actors. Recently, many scholars within the above-named approaches have emphasized that the survival of market actors is based on the strength of their networks and that inter-firm competition is being replaced by inter-network competition. Furthermore, project business is characterized by the building of goal-oriented, temporary networks whose aims, structures, and procedures are clarified and that are governed by processes of interaction as well as recurrent contracts. This study develops frameworks for studying and analysing collective network capability, i.e. collective capability created for the network of firms. The concept is first justified and positioned within the industrial networks, project business, and relationship marketing schools. An eclectic source of conceptual input is based on four major approaches to interorganizational business relationships. The study uses qualitative research and analysis, and the case report analyses the empirical phenomenon using a large number of qualitative techniques: tables, diagrams, network models, matrices etc. The study shows the high level of uniqueness and complexity of international project business. While perceived psychic distance between the parties may be small due to previous project experiences and the benefit of existing relationships, a varied number of critical events develop due to the economic and local context of the recipient country as well as the coordination demands of the large number of involved actors. The study shows that the successful creation of collective network capability led to the success of the network for the studied project. The processes and structures for creating collective network capability are encapsulated in a model of governance factors for interorganizational networks. The theoretical and management implications are summarized in seven propositions. The core implication is that project business success in unique and complex environments is achieved by accessing the capabilities of a network of actors, and project management in such environments should be built on both contractual and cooperative procedures with local recipient country parties.

Epitaxial growth of Co3O4 films by low temperature, low pressure chemical vapour deposition

The growth of strongly oriented or epitaxial thin films of metal oxides generally requires relatively high growth temperatures or infusion of energy to the growth surface through means such as ion bombardment. We have grown high quality epitaxial thin films of Co3O4 on different substrates at a temperature as low as 400 degreesC by low-pressure metalorganic chemical vapour deposition (MOCVD) using cobalt(II) acetylacetonate as the precursor. With oxygen as the reactant gas, polycrystalline Co3O4 films are formed on glass and Si (100) in the temperature range 400-550 degreesC. Under similar conditions of growth. highly oriented films of Co3O4 are formed on SrTiO3 (100) and LaAlO3 (100). The activation energy for the growth of polycrystalline films on glass is significantly higher than that for epitaxial growth on SrTiO3 (100). The film on LaAlO3 (100) grown at 450 degreesC shows a rocking curve FWHM of 1.61 degrees, which reduces to 1.32 degrees when it is annealed in oxygen at 725 degreesC. The film on SrTiO3 (100) has a FWHM of 0.33 degrees (as deposited) and 0.29 (after annealing at 725 degreesC). The phi -scan analysis shows cube-on-cube epitaxy on both these substrates. The quality of epitaxy on SrTiO3 (100) is comparable to the best of the perovskite-based oxide thin films grown at significantly higher temperatures. A plausible mechanism is proposed for the observed low temperature epitaxy. (C) 2001 Published by Elsevier Science B.V.

Synthesis, Structure, and Solid-State Transformation Studies of Phosphonoacetate Based Hybrid Compounds of Uranium and Thorium

Three new phosphonoacetate hybrid frameworks based on the actinide elements uranium and thorium have been synthesized. The compounds [C4N2H14][(UO2)(2)(O3PCH2COO)(2)]center dot H2O, I,[C4N2H14][(UO2)(2)(C2O4)(O3PCH2COOH)(2)], II, and Th(H2O)(2)(O3PCH2COO)(C2O4)(0.5). H2O, III, are built up from the connectivity between the metal polyhedra and the phosphonoacetate/oxalate units. Compound II has been prepared using a solvent-free approach, by a solid state reaction at 150 degrees C. It has been shown that II can also be prepared through a room temperature mechanochemical (grinding) route. The layer arrangement in III closely resembles to that observed in I. The compounds have been characterized by powder X-ray diffraction, IR spectroscopy, thermogravimetric analysis, and fluorescence studies.

Many Faces of Mao Zedong

The main aim of this work was to explore the use of Mao Zedong s (毛泽东, 1893—1976) visual image in contemporary Chinese art during the years 1976—2006. Chairman Mao is the most visually reproduced person in the People's Republic of China (PRC), and the presence of his image is still unquestionable at many levels. Although several scholars have provided insightful observations on this topic, research focusing on Mao's visual image has been neglected. Employing the interdisciplinary approach of visual studies and using image as the main concept, this research combines different theoretical frameworks, deriving from art history, image studies and social sciences, for each chapter in order to explain the origins, intentions and major strategies of the contemporary Chinese artists. The focus of this research was to elucidate how Mao's visual image, deriving from the Maoist era, is re-created and negotiated in contemporary Chinese art works. The material reproductions - the visual images in contemporary art - are created to be juxtaposed with the immaterial mental images of Mao that were created during the Maoist era through the original visual images of Mao. This complex interaction between visual and mental images is further exemplified by art works that do not include Mao's visual image, but still imply his mental image. The methods used derive from both sinology and art history. The research is based on extensive fieldwork in China, which was crucial for gathering new information and materials from this vigorous art scene. The topic is approached through a Chinese cultural, political and historical perspective that is necessary for a further understanding of how the original visual images of Mao obtained their omnipotent status and what kind of iconography was created. Close structural analysis, taking into account the format, style, techniques, composition, colors, materials and space used in the art works, is employed to demonstrate the great variety of visual images created. The analysis is further placed in a continuous dialogue both with the contemporary art works of Mao and with the original visual images of Mao from the past. In this study it is shown that contemporary Chinese art relating to Chairman Mao is a more versatile and multilayered phenomenon than is generally assumed. Although some of the art works seem to fit into the definition of superficial art, the study demonstrates that this reading of the art works is not adequate. The author argues that employing Mao's visual images in contemporary Chinese art is based on three main strategies used by artists: to create a visual dialogue with a traumatizing past, to employ transcontextual parody, and to explore the importance of Tian'anmen through site-dependent art. These strategies are not exclusionary, but instead interdependent and many art works employ more than one of them. In addition, these three main strategies include versatile methods used by artists that make the use of Mao's visual images even more multifaceted.

Synthesis, Structure and Optical Studies of a Family of Three-Dimensional Rare-Earth Aminoisophthalates M(mu(2)-OH)(C8H5NO4)] (M = Y3+, La3+, Pr3+, Nd3+, Sm3+, Eu3+, Gd3+, Dy3+, and Er3+)

A hydrothermal reaction of the acetate salts of the rare-earths, 5-aminoisophthalic acid (H(2)AIP), and NaOH at 150 degrees C for 3 days gave rise to a new family of three-dimensional rare-earth aminoisophthalates, M(mu(2)-OH)(C8H5NO4)] M = Y3+ (I), La3+ (II), Pr3+ (III), Nd3+ (IV), Sm3+ (V), Eu3+ (VI), Gd3+ (VII), Dy3+ (VIII), and Er3+ (IX)]. The structures contain M-O(H)-M chains connected by AIP anions. The AIP ions are connected to five metal centers and each metal center is connected with five AIP anions giving rise to a unique (5,5) net. To the best of our knowledge, this is the first observation of a (5,5) net in metal-organic frameworks that involve rare-earth elements. The doping of Eu3+/(3+) ions in place of Y3+/ La3+ in the parent structures gave rise to characteristic metal-centered emission (red = Eu3+, green = Tb3+). Life-time studies indicated that the excited emission states in the case of Eu3+ (4 mol-% doped) are in the range 0.287-0.490 ms and for Tb3+ (4 mol-% doped) are in the range of 1.265-1.702 ms. The Nd3+-containing compound exhibits up-conversion behavior based on two-photon absorption when excited using lambda = 580 nm.

Eteva Järvenpään perhepalvelukeskuksen lyhytaikaishoidon suunnittelun kehittäminen

Objectives. The thesis objective was to analyze how person-centred planning is applied to develop short term care in interaction between the disabled children, their families and the workers of the family service centre of Eteva Järvenpää. The thesis contributes to developing the methods of person-centred planning. I applied theoretical frameworks of activity theory and developmental work research, family-based work framework and disability phenomenon. The research questions were: What development needs did the families of disabled children have for the services? How were viewpoints of disabled children, their families and Eteva workers noticed in person-centred planning in the interaction between the disabled children, their families and Eteva workers? What disturbances and development challenges emerged during the person-centred planning? Methods. I first analysed the local history of the disability sector and the short term care to analyse challenges arising from the local history. The actural research material consisted of interviews with four families, two person-centred planning discussions and two discussions where the person-centred planning was reflected by the families.I used interaction voice analysis as defined by the activity theory and developmental work research. From the recorded interviews and discussions I analysed scripts, disturbances, innovation attempts and innovations. From the discussions I analysed also the interaction types (cooperation, coordination and communication). Results and conclusions. As problems, the families considered the scarce resources and the inflexibility of services. The challenges of developing the short term care were how to transfer information from short term care to home, how to develop activities for the children and how to take into account the individual needs of the children in the short term care. Both from the local history analysis and from the family interviews arised the conflict between caring and fulfilling the individual needs. In person-centred planning, the voice of the child was either interpreted by other family members or guided by family members or workers. I modelled the progress of person-centred planning in a two-dimensional coordination. Person-centred planning should be deepened in cooperation between the child, the family and the workers in everyday situations at home and during the short term care. The challenge is to expand person-centred planning to become cross-organizational cooperation connecting the actors of the child s service network in everyday life. Avainsanat Nyckelord - Keywords short term care, activity theory and developmental work research, person-centred planning, disability