Seismic mitigation of existing masonry structures by means of added damping and stiffness

In this work seismic upgrading of existing masonry structures by means of hysteretic ADAS dampers is treated. ADAS are installed on external concrete walls, which are built parallel to the building, and then linked to the building's slab by means of steel rod connection system. In order to assess the effectiveness of the intervention, a parametric study considering variation of damper main features has been conducted. To this aim, the concepts of equivalent linear system (ELS) or equivalent viscous damping are deepen. Simplified equivalent linear model results are then checked respect results of the yielding structures. Two alternative displacement based methods for damper design are herein proposed. Both methods have been validated through non linear time history analyses with spectrum compatible accelerograms. Finally ADAS arrangement for the non conventional implementation is proposed.

Metodi di ottimizzazione morfologica nel progetto preliminare di propulsori aeronautici avanzati

The aim of this Doctoral Thesis is to develop a genetic algorithm based optimization methods to find the best conceptual design architecture of an aero-piston-engine, for given design specifications. Nowadays, the conceptual design of turbine airplanes starts with the aircraft specifications, then the most suited turbofan or turbo propeller for the specific application is chosen. In the aeronautical piston engines field, which has been dormant for several decades, as interest shifted towards turboaircraft, new materials with increased performance and properties have opened new possibilities for development. Moreover, the engine’s modularity given by the cylinder unit, makes it possible to design a specific engine for a given application. In many real engineering problems the amount of design variables may be very high, characterized by several non-linearities needed to describe the behaviour of the phenomena. In this case the objective function has many local extremes, but the designer is usually interested in the global one. The stochastic and the evolutionary optimization techniques, such as the genetic algorithms method, may offer reliable solutions to the design problems, within acceptable computational time. The optimization algorithm developed here can be employed in the first phase of the preliminary project of an aeronautical piston engine design. It’s a mono-objective genetic algorithm, which, starting from the given design specifications, finds the engine propulsive system configuration which possesses minimum mass while satisfying the geometrical, structural and performance constraints. The algorithm reads the project specifications as input data, namely the maximum values of crankshaft and propeller shaft speed and the maximal pressure value in the combustion chamber. The design variables bounds, that describe the solution domain from the geometrical point of view, are introduced too. In the Matlab® Optimization environment the objective function to be minimized is defined as the sum of the masses of the engine propulsive components. Each individual that is generated by the genetic algorithm is the assembly of the flywheel, the vibration damper and so many pistons, connecting rods, cranks, as the number of the cylinders. The fitness is evaluated for each individual of the population, then the rules of the genetic operators are applied, such as reproduction, mutation, selection, crossover. In the reproduction step the elitist method is applied, in order to save the fittest individuals from a contingent mutation and recombination disruption, making it undamaged survive until the next generation. Finally, as the best individual is found, the optimal dimensions values of the components are saved to an Excel® file, in order to build a CAD-automatic-3D-model for each component of the propulsive system, having a direct pre-visualization of the final product, still in the engine’s preliminary project design phase. With the purpose of showing the performance of the algorithm and validating this optimization method, an actual engine is taken, as a case study: it’s the 1900 JTD Fiat Avio, 4 cylinders, 4T, Diesel. Many verifications are made on the mechanical components of the engine, in order to test their feasibility and to decide their survival through generations. A system of inequalities is used to describe the non-linear relations between the design variables, and is used for components checking for static and dynamic loads configurations. The design variables geometrical boundaries are taken from actual engines data and similar design cases. Among the many simulations run for algorithm testing, twelve of them have been chosen as representative of the distribution of the individuals. Then, as an example, for each simulation, the corresponding 3D models of the crankshaft and the connecting rod, have been automatically built. In spite of morphological differences among the component the mass is almost the same. The results show a significant mass reduction (almost 20% for the crankshaft) in comparison to the original configuration, and an acceptable robustness of the method have been shown. The algorithm here developed is shown to be a valid method for an aeronautical-piston-engine preliminary project design optimization. In particular the procedure is able to analyze quite a wide range of design solutions, rejecting the ones that cannot fulfill the feasibility design specifications. This optimization algorithm could increase the aeronautical-piston-engine development, speeding up the production rate and joining modern computation performances and technological awareness to the long lasting traditional design experiences.

Sviluppo di modelli motore e veicolo per l'analisi di strategie di controllo in applicazioni Software e Hardware In the Loop

This work describes the development of a simulation tool which allows the simulation of the Internal Combustion Engine (ICE), the transmission and the vehicle dynamics. It is a control oriented simulation tool, designed in order to perform both off-line (Software In the Loop) and on-line (Hardware In the Loop) simulation. In the first case the simulation tool can be used in order to optimize Engine Control Unit strategies (as far as regard, for example, the fuel consumption or the performance of the engine), while in the second case it can be used in order to test the control system. In recent years the use of HIL simulations has proved to be very useful in developing and testing of control systems. Hardware In the Loop simulation is a technology where the actual vehicles, engines or other components are replaced by a real time simulation, based on a mathematical model and running in a real time processor. The processor reads ECU (Engine Control Unit) output signals which would normally feed the actuators and, by using mathematical models, provides the signals which would be produced by the actual sensors. The simulation tool, fully designed within Simulink, includes the possibility to simulate the only engine, the transmission and vehicle dynamics and the engine along with the vehicle and transmission dynamics, allowing in this case to evaluate the performance and the operating conditions of the Internal Combustion Engine, once it is installed on a given vehicle. Furthermore the simulation tool includes different level of complexity, since it is possible to use, for example, either a zero-dimensional or a one-dimensional model of the intake system (in this case only for off-line application, because of the higher computational effort). Given these preliminary remarks, an important goal of this work is the development of a simulation environment that can be easily adapted to different engine types (single- or multi-cylinder, four-stroke or two-stroke, diesel or gasoline) and transmission architecture without reprogramming. Also, the same simulation tool can be rapidly configured both for off-line and real-time application. The Matlab-Simulink environment has been adopted to achieve such objectives, since its graphical programming interface allows building flexible and reconfigurable models, and real-time simulation is possible with standard, off-the-shelf software and hardware platforms (such as dSPACE systems).

Sviluppo e validazione sperimentale di strategie di previsione e controllo del fenomeno della preaccensione (Mega-Knock)

L’algoritmo per la previsione del Mega-Knock si inserisce all’interno di uno dei temi cardine dell’attuale ricerca nel campo motoristico: la minimizzazione del consumo di combustibile nei motori ad alto grado di sovralimentazione, sviluppati nell’ottica del downsizing. La possibilità di prevedere l’innescarsi del Mega-Knock consente di ottimizzare la definizione dell’obiettivo di titolo, evitando arricchimenti non necessari in un range di funzionamento del motore che frequentemente viene esplorato nella normale guida su strada. Si tratterà la possibilità di utilizzare una relazione empirica per cercare di arrivare alla previsione dell’insorgere della preaccensione, per poi ricorrere ad opportune strategie motore per evitare il verificarsi del fenomeno; il tutto tramite lo sviluppo di un algoritmo in ambiente MatLab-Simulink

Ecological modelling of the phytoplankton dynamics in the northern Gulf of Aqaba (Red Sea)

The Gulf of Aqaba represents a small scale, easy to access, regional analogue of larger oceanic oligotrophic systems. In this Gulf, the seasonal cycles of stratification and mixing drives the seasonal phytoplankton dynamics. In summer and fall, when nutrient concentrations are very low, Prochlorococcus and Synechococcus are more abundant in the surface water. This two populations are exposed to phosphate limitation. During winter mixing, when nutrient concentrations are high, Chlorophyceae and Cryptophyceae are dominant but scarce or absent during summer. In this study it was tried to develop a simulation model based on historical data to predict the phytoplankton dynamics in the northern Gulf of Aqaba. The purpose is to understand what forces operate, and how, to determine the phytoplankton dynamics in this Gulf. To make the models data sampled in two different sampling station (Fish Farm Station and Station A) were used. The data of chemical, biological and physical factors, are available from 14th January 2007 to 28th December 2009. The Fish Farm Station point was near a Fish Farm that was operational until 17th June 2008, complete closure date of the Fish Farm, about halfway through the total sampling time. The Station A sampling point is about 13 Km away from the Fish Farm Station. To build the model, the MATLAB software was used (version 7.6.0.324 R2008a), in particular a tool named Simulink. The Fish Farm Station models shows that the Fish Farm activity has altered the nutrient concentrations and as a consequence the normal phytoplankton dynamics. Despite the distance between the two sampling stations, there might be an influence from the Fish Farm activities also in the Station A ecosystem. The models about this sampling station shows that the Fish Farm impact appears to be much lower than the impact in the Fish Farm Station, because the phytoplankton dynamics appears to be driven mainly by the seasonal mixing cycle.

Development of Software Tools for the Test of Ultra Wide Band Receivers

In the last years, the importance of locating people and objects and communicating with them in real time has become a common occurrence in every day life. Nowadays, the state of the art of location systems for indoor environments has not a dominant technology as instead occurs in location systems for outdoor environments, where GPS is the dominant technology. In fact, each location technology for indoor environments presents a set of features that do not allow their use in the overall application scenarios, but due its characteristics, it can well coexist with other similar technologies, without being dominant and more adopted than the others indoor location systems. In this context, the European project SELECT studies the opportunity of collecting all these different features in an innovative system which can be used in a large number of application scenarios. The goal of this project is to realize a wireless system, where a network of fixed readers able to query one or more tags attached to objects to be located. The SELECT consortium is composed of European institutions and companies, including Datalogic S.p.A. and CNIT, which deal with software and firmware development of the baseband receiving section of the readers, whose function is to acquire and process the information received from generic tagged objects. Since the SELECT project has an highly innovative content, one of the key stages of the system design is represented by the debug phase. This work aims to study and develop tools and techniques that allow to perform the debug phase of the firmware of the baseband receiving section of the readers.

Fiber beam-columns models with flexure-shear interaction for nonlinear analysis of reinforced concrete structures

The aim of this study was to develop a model capable to capture the different contributions which characterize the nonlinear behaviour of reinforced concrete structures. In particular, especially for non slender structures, the contribution to the nonlinear deformation due to bending may be not sufficient to determine the structural response. Two different models characterized by a fibre beam-column element are here proposed. These models can reproduce the flexure-shear interaction in the nonlinear range, with the purpose to improve the analysis in shear-critical structures. The first element discussed is based on flexibility formulation which is associated with the Modified Compression Field Theory as material constitutive law. The other model described in this thesis is based on a three-field variational formulation which is associated with a 3D generalized plastic-damage model as constitutive relationship. The first model proposed in this thesis was developed trying to combine a fibre beamcolumn element based on the flexibility formulation with the MCFT theory as constitutive relationship. The flexibility formulation, in fact, seems to be particularly effective for analysis in the nonlinear field. Just the coupling between the fibre element to model the structure and the shear panel to model the individual fibres allows to describe the nonlinear response associated to flexure and shear, and especially their interaction in the nonlinear field. The model was implemented in an original matlab® computer code, for describing the response of generic structures. The simulations carried out allowed to verify the field of working of the model. Comparisons with available experimental results related to reinforced concrete shears wall were performed in order to validate the model. These results are characterized by the peculiarity of distinguishing the different contributions due to flexure and shear separately. The presented simulations were carried out, in particular, for monotonic loading. The model was tested also through numerical comparisons with other computer programs. Finally it was applied for performing a numerical study on the influence of the nonlinear shear response for non slender reinforced concrete (RC) members. Another approach to the problem has been studied during a period of research at the University of California Berkeley. The beam formulation follows the assumptions of the Timoshenko shear beam theory for the displacement field, and uses a three-field variational formulation in the derivation of the element response. A generalized plasticity model is implemented for structural steel and a 3D plastic-damage model is used for the simulation of concrete. The transverse normal stress is used to satisfy the transverse equilibrium equations of at each control section, this criterion is also used for the condensation of degrees of freedom from the 3D constitutive material to a beam element. In this thesis is presented the beam formulation and the constitutive relationships, different analysis and comparisons are still carrying out between the two model presented.

A prediction of bone remodeling thanks to a mechanical signal on cells - Predizione del rimodellamento osseo a partire da un segnale meccanico sulle cellule

This text wants to explore the process of bone remodeling. The idea supported is that the signal, the cells acquire and which suggest them to change in their architectural conformation, is the potential difference on the free boundaries surfaces of collagen fibers. These ones represent the bone in the nanoscale. This work has as subject a multiscale model. Lots of studies have been made to try to discover the relationship between a macroscopic external bone load and the cellular scale. The tree first simulations have been a longitudinal, a flexion and a transversal compression force on a full longitudinal fiber 0-0 sample. The results showed first the great difference between a fully longitudinal stress and a flexion stress. Secondly a decrease in the potential difference has been observed in the transversal force configuration, suggesting that such a signal could be taken as the one, who leads the bone remodeling. To also exclude that the obtained results was not to attribute to a piezoelectric collagen effect and not to a mechanical load, different coupling analyses have been developed. Such analyses show this effect is really less important than the one the mechanical load is responsible of. At this point the work had to explore how bone remodeling could develop. The analyses involved different geometry and fibers percentage. Moreover at the beginning the model was to manually implement. The author, after an initial improvement of it, provided to implement a standalone version thanks to integration between Comsol Multiphysic, Matlab and Excel.

Analysis and Implementation of Multiphase-Multilevel Inverter for Open-Winding Loads

Research work carried out in focusing a novel multiphase-multilevel ac motor drive system much suitable for low-voltage high-current power applications. In specific, six-phase asymmetrical induction motor with open-end stator winding configuration, fed from four standard two-level three-phase voltage source inverters (VSIs). Proposed synchronous reference frame control algorithm shares the total dc source power among the 4 VSIs in each switching cycle with three degree of freedom. Precisely, first degree of freedom concerns with the current sharing between two three-phase stator windings. Based on modified multilevel space vector pulse width modulation shares the voltage between each single VSIs of two three-phase stator windings with second and third degree of freedom, having proper multilevel output waveforms. Complete model of whole ac motor drive based on three-phase space vector decomposition approach was developed in PLECS - numerical simulation software working in MATLAB environment. Proposed synchronous reference control algorithm was framed in MATLAB with modified multilevel space vector pulse width modulator. The effectiveness of the entire ac motor drives system was tested. Simulation results are given in detail to show symmetrical and asymmetrical, power sharing conditions. Furthermore, the three degree of freedom are exploited to investigate fault tolerant capabilities in post-fault conditions. Complete set of simulation results are provided when one, two and three VSIs are faulty. Hardware prototype model of quad-inverter was implemented with two passive three-phase open-winding loads using two TMS320F2812 DSP controllers. Developed McBSP (multi-channel buffered serial port) communication algorithm able to control the four VSIs for PWM communication and synchronization. Open-loop control scheme based on inverse three-phase decomposition approach was developed to control entire quad-inverter configuration and tested with balanced and unbalanced operating conditions with simplified PWM techniques. Both simulation and experimental results are always in good agreement with theoretical developments.

Analisi delle tecnologie BMP per i sistemi di drenaggio urbano

I sistemi di drenaggio urbano meritano particolare attenzione per l’importante compito che devono garantire all’interno della società. L’allontanamento delle acque reflue dalle zone urbanizzate infatti è indispensabile per non creare problemi ed interferenze con attività sociali ed economiche che in esse si svolgono; inoltre un corretto funzionamento del sistema di drenaggio assicura anche un basso impatto ambientale in termini di qualità e quantità. La disponibilità di nuove tecnologie costruttive e materiali in continua evoluzione devono fare fronte alla crescente complessità idraulica, geotecnica e urbanistica delle strutture componenti i sistemi di drenaggio; in tale elaborato si vuole porre l’accento sul problema dello smaltimento delle acque meteoriche nelle zone densamente urbanizzate, la cui soluzione è costituita dall'adozione delle cosiddette BMP (Best Management Practices). Le BMP sono definite come strategie, pratiche o metodi per la rimozione, la riduzione, il ritardo o la prevenzione della quantità di costituenti inquinanti e contaminanti delle acque di pioggia, prima che giungano nei corpi idrici ricettori. Tra esse ricordiamo le cisterne o rain barrels, i pozzi asciutti, i sistemi drywell, le vasche verdi filtranti, i tetti verdi, i canali infiltranti, i fossi di infiltrazione, i pozzi perdenti, i planting container, i canali inerbiti, i bacini di infiltrazione, le gross pullutant traps (gpts), gli stagni, i sistemi di fitodepurazione estensiva (sfe), le pavimentazioni drenanti. In Italia esse risultano ancora scarsamente studiate ed applicate, mentre trovano più ampio sviluppo in realtà estere come in Inghilterra ed in Australia. Per comprendere la efficacia di tali tecniche BMP è necessario analizzarle e, soprattutto, analizzare il loro effetto sul territorio in cui esse vengono inserite e sul regime idrogeologico dell’ambiente. Questa analisi può essere svolta con prove sperimentali su aree di controllo (soluzione economicamente gravosa) o attraverso modelli matematici tramite l’utilizzo di software di calcolo che simulino il comportamento delle portate, dei tiranti idrici e degli inquinanti nei canali e nelle strutture accessorie costituenti la rete fognaria, in conseguenza ad eventi di pioggia dei quali sia nota la distribuzione spaziale e temporale. In questo elaborato si modellizza attraverso il programma Matlab un unico elemento BMP e si osservano i suoi effetti; si procede cioè alla analisi del funzionamento di un ipotetico brown roof installato nella zona di Rimini e si osservano i benefici effetti che ne derivano in termini di volumi di pioggia trattenuti dal sistema considerando diverse tipologie di pioggia e diversi parametri progettuali per il tetto (i fori dello strato inferiore del tetto, la altezza dello strato di terreno, la sua permeabilità e la sua porosità). Si procede poi con la analisi di una ipotetica zona commerciale che sorge sulle sponde di un fiume. Tali analisi vengono svolte con il software HEC-RAS per quanto riguarda la analisi dei livelli del fiume e delle zone a rischio di inondazione. I risultati forniti da questo studio preliminare vengono poi utilizzati come condizioni al contorno per una successiva analisi effettuata con il software InfoWorks in cui si valutano i benefici che derivano dalla installazione di diverse BMP nella zona commerciale oggetto di studio. Tale modello esamina un verosimile scenario inglese, la cittadina infatti si ipotizza situata in Inghilterra e anche gli eventi pluviometrici a cui ci si riferisce sono tipici eventi di pioggia inglesi. Tutti i dati di input elaborati nelle simulazioni sono stati forniti all’interno di un progetto universitario svolto presso l’università di Bradford con la supervisione dei professori Simon Tait ed Alma Schellart. Infine la parte conclusiva dell’elaborato è stata sviluppata in collaborazione con Hera S.p.a. di Rimini all’interno di un percorso di tirocinio curriculare che ha previsto la analisi delle tecnologie BMP adatte per l’ambiente cittadino di Rimini e la osservazione delle performance garantite da tecnologie esistenti sul territorio: i parcheggi permeabili. La realtà riminese infatti deve far fronte a diversi problemi che si innescano durante i periodi di pioggia ed una mitigazione dei volumi di acqua in arrivo alla fognatura grazie a questo tipo di tecnologie, senza quindi ricorrere agli usuali sistemi puntuali, porterebbe sicuramente a notevoli vantaggi. Tali tecnologie però non devono solo essere progettate e costruite in modo corretto, ma devono essere sottoposte a periodici controlli ed adeguate operazioni di manutenzione per non perdere la loro efficacia. Per studiare tale aspetto si procede quindi alla misura della permeabilità di parcheggi drenanti presenti all’interno dei comuni di Cattolica e Rimini ricercando i fattori che influenzano tale caratteristica fondamentale dei parcheggi.

Implementazione di una nuova metodologia per la simulazione di un motore sovralimentato ad alte prestazioni

In questo lavoro verrà analizzato lo sviluppo di una nuova modellazione matematica per la simulazione della dinamica del flusso all’interno del sistema di aspirazione per motori sovralimentati. Tale modellazione si basa sulla risoluzione numerica mediante la formulazione proposta da Courant, Isaacson e Rees (CIR) nel 1952 per il set delle equazioni non conservative di Eulero per il caso monodimensionale. L’applicazione attraverso il software Matlab-Simulink di tali discretizzazioni numeriche garantisce la possibilità di calcolare la dinamica del flusso all’interno del condotto. L’innovazione proposta da questo lavoro consiste nel considerare l’intero stato da iterare come un vettore, permettendo di gestire parte delle operazioni da compiere con delle matrici. Questo approccio è stato adottato sia per una maggior velocità di calcolo, sia per rendere più agevole la modifica della geometria, ad esempio in fase di progettazione. La routine di lancio del nuovo modello, infatti, gestirà autonomamente la scrittura delle matrici, a partire dai pochi parametri necessari per la definizione della geometria all’interno del codice. Si andranno quindi a presentare i passaggi più importanti che hanno portato alla scrittura del codice, con particolare attenzione poi alla fase di validazione del modello. Essa sarà basata sia su un altro codice presente in letteratura, modellato anch’esso attraverso risoluzione CIR, sia mediante dati sperimentali utilizzati per la validazione di tale implementazione. Seguirà infine un’analisi dettagliata sui fattori che influenzano, positivamente e negativamente, l’esito delle simulazioni realizzate, come la discretizzazione spaziale e quella temporale, prestando sempre particolare attenzione alla stabilità del metodo.

Modeling and simulation of a synthetic genetic circuit that implements a multicelled behavior in a growing microcolony of E. coli

Synthetic Biology is a relatively new discipline, born at the beginning of the New Millennium, that brings the typical engineering approach (abstraction, modularity and standardization) to biotechnology. These principles aim to tame the extreme complexity of the various components and aid the construction of artificial biological systems with specific functions, usually by means of synthetic genetic circuits implemented in bacteria or simple eukaryotes like yeast. The cell becomes a programmable machine and its low-level programming language is made of strings of DNA. This work was performed in collaboration with researchers of the Department of Electrical Engineering of the University of Washington in Seattle and also with a student of the Corso di Laurea Magistrale in Ingegneria Biomedica at the University of Bologna: Marilisa Cortesi. During the collaboration I contributed to a Synthetic Biology project already started in the Klavins Laboratory. In particular, I modeled and subsequently simulated a synthetic genetic circuit that was ideated for the implementation of a multicelled behavior in a growing bacterial microcolony. In the first chapter the foundations of molecular biology are introduced: structure of the nucleic acids, transcription, translation and methods to regulate gene expression. An introduction to Synthetic Biology completes the section. In the second chapter is described the synthetic genetic circuit that was conceived to make spontaneously emerge, from an isogenic microcolony of bacteria, two different groups of cells, termed leaders and followers. The circuit exploits the intrinsic stochasticity of gene expression and intercellular communication via small molecules to break the symmetry in the phenotype of the microcolony. The four modules of the circuit (coin flipper, sender, receiver and follower) and their interactions are then illustrated. In the third chapter is derived the mathematical representation of the various components of the circuit and the several simplifying assumptions are made explicit. Transcription and translation are modeled as a single step and gene expression is function of the intracellular concentration of the various transcription factors that act on the different promoters of the circuit. A list of the various parameters and a justification for their value closes the chapter. In the fourth chapter are described the main characteristics of the gro simulation environment, developed by the Self Organizing Systems Laboratory of the University of Washington. Then, a sensitivity analysis performed to pinpoint the desirable characteristics of the various genetic components is detailed. The sensitivity analysis makes use of a cost function that is based on the fraction of cells in each one of the different possible states at the end of the simulation and the wanted outcome. Thanks to a particular kind of scatter plot, the parameters are ranked. Starting from an initial condition in which all the parameters assume their nominal value, the ranking suggest which parameter to tune in order to reach the goal. Obtaining a microcolony in which almost all the cells are in the follower state and only a few in the leader state seems to be the most difficult task. A small number of leader cells struggle to produce enough signal to turn the rest of the microcolony in the follower state. It is possible to obtain a microcolony in which the majority of cells are followers by increasing as much as possible the production of signal. Reaching the goal of a microcolony that is split in half between leaders and followers is comparatively easy. The best strategy seems to be increasing slightly the production of the enzyme. To end up with a majority of leaders, instead, it is advisable to increase the basal expression of the coin flipper module. At the end of the chapter, a possible future application of the leader election circuit, the spontaneous formation of spatial patterns in a microcolony, is modeled with the finite state machine formalism. The gro simulations provide insights into the genetic components that are needed to implement the behavior. In particular, since both the examples of pattern formation rely on a local version of Leader Election, a short-range communication system is essential. Moreover, new synthetic components that allow to reliably downregulate the growth rate in specific cells without side effects need to be developed. In the appendix are listed the gro code utilized to simulate the model of the circuit, a script in the Python programming language that was used to split the simulations on a Linux cluster and the Matlab code developed to analyze the data.

Comparative Analysis of Alternative Hybrid Systems for Automotive Applications

The main objective of this work was to investigate the impact of different hybridization concepts and levels of hybridization on fuel economy of a standard road vehicle where both conventional and non-conventional hybrid architectures are treated exactly in the same way from the point of view of overall energy flow optimization. Hybrid component models were developed and presented in detail as well as the simulations results mainly for NEDC cycle. The analysis was performed on four different parallel hybrid powertrain concepts: Hybrid Electric Vehicle (HEV), High Speed Flywheel Hybrid Vehicle (HSF-HV), Hydraulic Hybrid Vehicle (HHV) and Pneumatic Hybrid Vehicle (PHV). In order to perform equitable analysis of different hybrid systems, comparison was performed also on the basis of the same usable system energy storage capacity (i.e. 625kJ for HEV, HSF and the HHV) but in the case of pneumatic hybrid systems maximal storage capacity was limited by the size of the systems in order to comply with the packaging requirements of the vehicle. The simulations were performed within the IAV Gmbh - VeLoDyn software simulator based on Matlab / Simulink software package. Advanced cycle independent control strategy (ECMS) was implemented into the hybrid supervisory control unit in order to solve power management problem for all hybrid powertrain solutions. In order to maintain State of Charge within desired boundaries during different cycles and to facilitate easy implementation and recalibration of the control strategy for very different hybrid systems, Charge Sustaining Algorithm was added into the ECMS framework. Also, a Variable Shift Pattern VSP-ECMS algorithm was proposed as an extension of ECMS capabilities so as to include gear selection into the determination of minimal (energy) cost function of the hybrid system. Further, cycle-based energetic analysis was performed in all the simulated cases, and the results have been reported in the corresponding chapters.

Caratterizzazione sperimentale di dispositivi antivibranti e ottimizzazione del loro impiego su un auto da F1

Studio di alcuni dispositivi presenti nelle vetture di formula 1, ma anche in quelle di serie più comuni, per l’ancoraggio e per l’isolamento delle vibrazioni fra componentistiche elettriche e telaio del veicolo. Questi dispositivi, noti come antivibranti (AV), svolgono un ruolo essenziale nel cercare di preservare i dispositivi elettrici: centraline, scatole cablate e connessioni elettriche. Il diffondersi di strumentazione adeguata a costi non più proibitivi ha permesso di studiare più in dettaglio e più scientificamente il comportamento degli AV per sfruttarli al meglio. Obiettivo di questo studio è dare una caratterizzazione scientifica e rigorosa alla maggior parte degli antivibranti presenti in STR7 monoposto Toro Rosso (mondiale di F1 2012), buona parte dei quali verrà utilizzata anche nelle successive vetture. Si volevano, inoltre, sviluppare alcuni modelli che potessero simulare correttamente montaggi di centraline generiche con tutte le diverse tipologie di antivibranti, in modo tale da poter vedere, prima ancora di realizzarli, come si comportavano i sistemi in quelle condizioni e dunque poter apportare modifiche al progetto tali da ottenere la configurazione di montaggio migliore. La continua ricerca di miglioramenti prestazionali che una competizione motoristica ad altissimi livelli richiede, il costante bisogno di alleggerimenti e maggiore affidabilità spingono la ricerca e l'azienda voleva passare da una progettazione basata sulla ripetizione delle configurazioni dimostratesi affidabili nel passato ad una progettazione più tecnica, scientifica e prestazionale. Per una buona caratterizzazione delle proprietà degli antivibranti sono stati progettati specifici test da eseguire al banco vibrante con i quali, lavorando nel dominio delle frequenze, si sono sfruttate le funzioni di risposte in frequenze di ogni antivibrante per ricavare i parametri caratteristici degli stessi nelle varie configurazioni. Con strategie grafiche, numeriche e teoriche si sono ricavati, con buone precisioni, i valori dei coefficienti di smorzamento e di rigidezza che caratterizzano i componenti studiati. Per l’esecuzione di questi test sono stati utilizati tutti gli strumenti messi a disposizione da Scuderia Toro Rosso nel laboratorio per prove vibrazionali recentemente approntato. Per la parte di simulazione numerica invece sono stati sfruttati i risultati ottenuti nella caratterizzazione degli antivibranti per creare programmi in ambiente Matlab che possano simulare il comportamento di generiche centraline montate in generici modi. Risultati di questo studio saranno gli andamenti dei coefficienti di rigidezza e smorzamento dei vari antivibranti nelle diverse configurazioni; inoltre si renderanno disponibili ai progettisti istruzioni e semplici programmi per la valutazione delle scelte fatte al fine di minimizzare le vibrazioni dei dispositivi.

Comparison of EEG signals from epilepsy patients with Bump modeling

Background: l’epilessia è una malattia cerebrale che colpisce oggigiorno circa l’1% della popolazione mondiale e causa, a chi ne soffre, convulsioni ricorrenti e improvvise che danneggiano la vita quotidiana del paziente. Le convulsioni sono degli eventi che bloccano istantaneamente la normale attività cerebrale; inoltre differiscono tra i pazienti e, perciò, non esiste un trattamento comune generalizzato. Solitamente, medici neurologi somministrano farmaci, e, in rari casi, l’epilessia è trattata con operazioni neurochirurgiche. Tuttavia, le operazioni hanno effetti positivi nel ridurre le crisi, ma raramente riescono a eliminarle del tutto. Negli ultimi anni, nel campo della ricerca scientifica è stato provato che il segnale EEG contiene informazioni utili per diagnosticare l'arrivo di un attacco epilettico. Inoltre, diversi algoritmi automatici sono stati sviluppati per rilevare automaticamente le crisi epilettiche. Scopo: lo scopo finale di questa ricerca è l'applicabilità e l'affidabilità di un dispositivo automatico portatile in grado di rilevare le convulsioni e utilizzabile come sistema di monitoraggio. L’analisi condotta in questo progetto, è eseguita con tecniche di misure classiche e avanzate, in modo tale da provare tecnicamente l’affidabilità di un tale sistema. La comparazione è stata eseguita sui segnali elettroencefalografici utilizzando due diversi sistemi di acquisizione EEG: il metodo standard utilizzato nelle cliniche e il nuovo dispositivo portatile. Metodi: è necessaria una solida validazione dei segnali EEG registrati con il nuovo dispositivo. I segnali saranno trattati con tecniche classiche e avanzate. Dopo le operazioni di pulizia e allineamento, verrà utilizzato un nuovo metodo di rappresentazione e confronto di segnali : Bump model. In questa tesi il metodo citato verrà ampiamente descritto, testato, validato e adattato alle esigenze del progetto. Questo modello è definito come un approccio economico per la mappatura spazio-frequenziale di wavelet; in particolare, saranno presenti solo gli eventi con un’alta quantità di energia. Risultati: il modello Bump è stato implementato come toolbox su MATLAB dallo sviluppatore F. Vialatte, e migliorato dall’Autore per l’utilizzo di registrazioni EEG da sistemi diversi. Il metodo è validato con segnali artificiali al fine di garantire l’affidabilità, inoltre, è utilizzato su segnali EEG processati e allineati, che contengono eventi epilettici. Questo serve per rilevare la somiglianza dei due sistemi di acquisizione. Conclusioni: i risultati visivi garantiscono la somiglianza tra i due sistemi, questa differenza la si può notare specialmente comparando i grafici di attività background EEG e quelli di artefatti o eventi epilettici. Bump model è uno strumento affidabile per questa applicazione, e potrebbe essere utilizzato anche per lavori futuri (ad esempio utilizzare il metodo di Sincronicità Eventi Stocas- tici SES) o differenti applicazioni, così come le informazioni estratte dai Bump model potrebbero servire come input per misure di sincronicità, dalle quali estrarre utili risultati.