Determinant factors to merger control decisions in Portugal

The present paper aims to investigate the determinant factors of Portuguese merger control. Our sample comprises 652 M&A cases occurred between January of 2003 and September of 2015. Through a probit model we have tested the relevance of product and geographic market, entry barriers, type of concentration, merger effects, year of decision and the President of the Competition Authority at the time. The results suggests that the conglomerate and vertical effects, the existence of barriers to entry as well as the number of regulatory agencies listened are the main explanatory variables to determine a need for an in-depth investigation and to make a final decision. According to the evidence, cases cleared at Phase 1 are increasing over time. The number of prohibited mergers is close to zero.

Estudo do galgamento em estruturas marítimas verticais utilizando o modelo numérico AMAZON

O galgamento oceânico é um fenómeno associado à interação de ondas com estruturas marítimas. Nesta dissertação estudou-se o galgamento em estruturas marítimas verticais através da aplicação do modelo numérico AMAZON, que é um modelo bidimensional, baseado na resolução das equações não lineares de águas pouco profundas. Para validar a sua aplicação a estruturas marítimas verticais impermeáveis, os resultados de caudal médio galgado obtidos com o modelo AMAZON foram comparados com os resultados de ensaios em modelo físico bidimensional realizados anteriormente e disponíveis na base de dados do projeto europeu CLASH. Os resultados foram ainda comparados com os das fórmulas empíricas e semi-empíricas de Van der Meer & Bruce de 2014, de Goda de 2008 e de Hedges & Reis de 2015. Antes da sua validação, o modelo foi calibrado utilizando um dos ensaios do CLASH. Para tal, realizou-se uma análise de sensibilidade a alguns parâmetros do modelo, concretamente da dimensão mínima da malha, da escala de aplicação do AMAZOM (à escala reduzida ou à do protótipo), da forma de modelação da parede vertical, já que, dado este modelo ser integrado na vertical, não é possível considerar paredes verticais sem utilizar um artifício de cálculo, dos valores de alguns dos parâmetros de entrada do modelo (profundidade mínima molhada e a profundidade mínima de fricção) e da dimensão do domínio de cálculo. Os resultados da calibração do AMAZON mostram que, por causa da precisão do modelo para os menores caudais médios de galgamento, se deve aplicar o modelo à escala do protótipo. Para estruturas verticais, a aproximação que o modelo faz, por defeito, para a secção vertical da estrutura através de um talude fictício a 10:1 apresenta melhores resultados que a utilização de um talude a 20:1. Contudo, ambos requerem a adoção de uma dimensão da malha bastante reduzida nesta zona e na sua vizinhança (0.03 m). No caso em estudo, os dois parâmetros de entrada do modelo não têm impacto significativo nos resultados, ao contrário do domínio de cálculo que, tal como recomendado na literatura de referência, se deve iniciar (fronteira de entrada) a aproximadamente um comprimento de onda do pé da estrutura. Os resultados obtidos mostram que, em geral, o AMAZON subestima o valor medido do caudal médio galgado com erros relativos variáveis entre -91% e -49%; apenas para um caso o modelo sobrestima o caudal médio, com um erro relativo de 43%. Quando comparado com as formulações empíricas e semi-empíricas, a fórmula de Van der Meer & Bruce apresenta melhores aproximações aos caudais médios medidos que constam na base de dados do CLASH, seguida da fórmula de Goda e dos resultados do modelo AMAZON, embora estes dois últimos apresentem valores bastante próximos. Assim, uma vez que o modelo está em constante desenvolvimento, espera-se que no futuro seja uma ferramenta mais poderosa. Contudo, enquanto não se fizerem melhorias no modelo e/ou não se estender a outros ensaios a análise feita no âmbito desta dissertação, os resultados sugerem que não há vantagem na sua utilização face às formulações empíricas e semi-empíricas disponíveis, tendo também em conta o significativo tempo computacional exigido para executar o AMAZON com a dimensão da malha escolhida.

Harvest control rule vs optimal harvesting of an age-structured population: The case of the Ibero-Atlantic Sardine Fishery

Research Masters

FPGA field oriented control of an axial flux motor-in-wheel

This paper presents the design and the prototype implementation of a three-phase power inverter developed to drive a motor-in-wheel. The control system is implemented in a FPGA (Field Programmable Gate Array) device. The paper describes the Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique that were implemented. The control platform uses a Spartan-3E FPGA board, programmed with Verilog language. Simulation and experimental results are presented to validate the developed system operation under different load conditions. Finally are presented conclusions based on the experimental results.

Field oriented control of an axial flux permanent magnet synchronous motor for traction solutions

Electric Vehicles (EVs) are increasingly used nowadays, and different powertrain solutions can be adopted. This paper describes the control system of an axial flux Permanent Magnet Synchronous Motor (PMSM) for EVs powertrain. It is described the implemented Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique. Also, the mathematical model of the PMSM is presented. Both, simulation and experimental, results with different types of mechanical load are presented. The experimental results were obtained using a laboratory test bench. The obtained results are discussed.

Predictive control of a current-source inverter for solar photovoltaic grid interface

Solar photovoltaic systems are an increasing option for electricity production, since they produce electrical energy from a clean renewable energy resource, and over the years, as a result of the research, their efficiency has been increasing. For the interface between the dc photovoltaic solar array and the ac electrical grid is necessary the use of an inverter (dc-ac converter), which should be optimized to extract the maximum power from the photovoltaic solar array. In this paper is presented a solution based on a current-source inverter (CSI) using continuous control set model predictive control (CCS-MPC). All the power circuits and respective control systems are described in detail along the paper and were tested and validated performing computer simulations. The paper shows the simulation results and are drawn several conclusions.

The residual effect of deltametrine in the control of Malaria as observed on fifferent types Of walls In the Brazilian Amazon 1

The residual power of deltametrine FW (25 mg 1 .a/m2) was evaluated and compared to that of DDT (2 g i.a./m2) by means of biological tests. The different kinds of material used in constructing houses in Amazonia, such as: masonry, wood, and wattle and daub, were used. Data from logistic regression showed that the drop in mortality, the inclination of the curve in relation to time, was similar for the two insecticides in the first samples. The negative coeficient for the variable, months after application, confirmed a reduction in the activity of both insecticides. Wooden and wattle walls showed positive and negative coeficiencies respectively from the beginning. The wooden walls retained a residual effect but the wattle walls were shown to be the least indicated for the application of insecticides The experiments demonstrated a more prolonged residual effect for deltametrine as compared to DDT, and that insecticides work better on brick and cement and wooden walls than they do on wattle and daub constructions. For these reasons, it would be necessary to spray brick and cement walls every 8 months, wooden ones every 9 months and wattle constructions every 7 months to control the vectors of malaria.

Estudo numérico sobre o reforço de pilares de betão armado reforçados com cantoneiras e presilhas metálicas. Análise paramétrica.

A presente comunicação descreve o estudo paramétrico desenvolvido com base no método dos elementos finitos (MEF) para analisar a influência de factores geométricos e mecânicos no comportamento à flexo-compressão de pilares de betão armado (BA) reforçados com cantoneiras e presilhas de aço (steel caging). Com base num modelo de elementos finitos 3D, levou-se a cabo um estudo numérico sobre a influência de vários fatores no comportamento à flexo-compressão de pilares BA. Esses factores são: a dimensão dos pilares, a dimensão dos elementos que formam o reforço (cantoneiras e presilhas) e as propriedades mecânicas dos materiais constituintes do pilar de betão armado e do reforço (cantoneiras e presilhas de aço).

Estudo experimental e numérico sobre o comportamento de vigas mistas com conector Crestbond

Nesta comunicação apresenta-se um estudo sobre vigas mistas em aço e betão onde se utilizam conectores do tipo Crestbond contínuos para estabelecer a ligação entre a viga metálica e a laje de betão e garantir o funcionamento misto entre estes dois elementos. Apresentam-se os resultados de ensaios numéricos e experimentais obtidos em vigas mistas de aço e betão realizadas com conectores Crestbond, na Universidade do Minho. Os provetes consistem numa viga metálica IPE200 com um conector CR40 R10 contínuo, posicionado sobre o banzo superior da viga e soldado em todo o seu desenvolvimento, e uma laje betão armado com secção transversal de 0.40×0.10 m2. Os provetes apresentam um vão de 3.0 m e um comprimento total de 3.2 m. O modelo numérico foi desenvolvido no software Atena 3D.

Geometria urbana e ilha de calor noturna: análise baseada em um modelo numérico

A geometria urbana e uma das causas do fenomeno da ilha de calor,pois provoca alteracao do balanco energetico nas cidades. Essa pesquisa visa identificar um raio de abrangencia adequado para a determinacao da influencia termica da geometria urbana. Para isso explora ferramentas de um Sistema de Informacoes Geograficas, aplicando um modelo numerico (o modelo de Oke), que relaciona a geometria urbana e a intensidade da ilha de calor. Dados térmicos reais sao comparados a dados simulados para diferentes raios de abrangencia. Os resultados apontaram que o raio de 30 m e o que em media permite maior aproximacao entre dados reais e dados simulados. Alem disso, verificou-se que o modelo aplicado demonstra comportamento diferenciado, conforme o grau de homogeneidade das alturas das edificacoes.

Vision-based hand Wheel-chair control

Several studies have shown that people with disabilities benefit substantially from access to a means of independent mobility and assistive technology. Researchers are using technology originally developed for mobile robots to create easier to use wheelchairs. With this kind of technology people with disabilities can gain a degree of independence in performing daily life activities. In this work a computer vision system is presented, able to drive a wheelchair with a minimum number of finger commands. The user hand is detected and segmented with the use of a kinect camera, and fingertips are extracted from depth information, and used as wheelchair commands.

Geological control of Podocnemis expansa and Podocnemis unifilis nesting areas in Rio Javaés, Bananal Island, Brazil

The distribution of the nests of Podocnemis expansa (Amazon turtle) and Podocnemis unifilis (yellow-spotted side neck turtle) along the point bars of the Javaés River in Bananal Island, demonstrates a clear preference of these chelonians for differentiated geological environments, in respect to the morphology, grain size or height of the nests in relation to the level of the river. The topographical distribution and the differences in the grain size of the sediments that compose the point bars of the river, originated from the multiple sedimentary processes, and make possible the creation and separation of different nesting environments. Each turtle species takes advantage of the place that presents physiographic characteristics appropriate to the hatching success of their eggs. The superposition of the P. expansa and P. unifilis nest placement areas is rare. The P. expansa nests are concentrated on the central portion of the beaches where successive depositional sedimentary events produced sandy banks more than 3.3 m above the river water level. The P. unifilis nests are distributed preferentially in the upstream and downstream portions along the point bars where the sandy deposits rarely surpass 1.5 m at the moment of laying. P. expansa nests located on the beaches of fine to medium sized sand hatch in a mean of 68 days, while those incubated on beaches of medium to coarse sand size take a mean of 54 days to hatch.

Towards effective control of P2P traffic aggregates in network infrastructures

Nowadays, many P2P applications proliferate in the Internet. The attractiveness of many of these systems relies on the collaborative approach used to exchange large resources without the dependence and associated constraints of centralized approaches where a single server is responsible to handle all the requests from the clients. As consequence, some P2P systems are also interesting and cost-effective approaches to be adopted by content-providers and other Internet players. However, there are several coexistence problems between P2P applications and In- ternet Service Providers (ISPs) due to the unforeseeable behavior of P2P traffic aggregates in ISP infrastructures. In this context, this work proposes a collaborative P2P/ISP system able to underpin the development of novel Traffic Engi- neering (TE) mechanisms contributing for a better coexistence between P2P applications and ISPs. Using the devised system, two TE methods are described being able to estimate and control the impact of P2P traffic aggregates on the ISP network links. One of the TE methods allows that ISP administrators are able to foresee the expected impact that a given P2P swarm will have in the underlying network infrastructure. The other TE method enables the definition of ISP friendly P2P topologies, where specific network links are protected from P2P traffic. As result, the proposed system and associated mechanisms will contribute for improved ISP resource management tasks and to foster the deployment of innovative ISP-friendly systems.

Fuzzy maintenance costs of a wind turbine pitch control device

This paper deals with the problem of estimation maintenance costs for the case of the pitch controls system of wind farms turbines. Previous investigations have estimated these costs as (traditional) “crisp” values, simply ignoring the uncertainty nature of data and information available. This paper purposes an extended version of the estimation model by making use of the Fuzzy Set Theory. The results alert decision-makers to consequent uncertainty of the estimations along with their overall level, thus improving the information given to the mainte-nance support system.

Active magneto-optical control of spontaneous emission in graphene

We investigate the spontaneous emission rate of a two-level quantum emitter near a graphene-coated substrate under the influence of an external magnetic field or strain induced pseudo-magnetic field. We demonstrate that the application of the magnetic field can substantially increase or decrease the decay rate. We show that a suppression as large as 99$\%$ in the Purcell factor is achieved even for moderate magnetic fields. The emitter's lifetime is a discontinuous function of $|{\bf B}|$, which is a direct consequence of the occurrence of discrete Landau levels in graphene. We demonstrate that, in the near-field regime, the magnetic field enables an unprecedented control of the decay pathways into which the photon/polariton can be emitted. Our findings strongly suggest that a magnetic field could act as an efficient agent for on-demand, active control of light-matter interactions in graphene at the quantum level.