A new method for extending the range of conductive polymer sensors for contact force

This paper describes a technique for extending the force range of thin conductive polymer force sensors used for measuring contact force. These sensors are conventionally used for measuring force by changing electrical resistance when they are compressed. The new method involves measuring change in electrical resistance when the flexible sensor, which is sensitive to both compression and bending, is sandwiched between two layers of spring steel, and the structure is supported on a thin metal ring. When external force is applied, the stiffened sensor inside the spring steel is deformed within the annular center of the ring, causing the sensor to bend in proportion to the applied force. This method effectively increases the usable force range, while adding little in the way of thickness and weight. Average error for loads between 10 N and 100 N was 2.2 N (SD = 1.7) for a conventional conductive polymer sensor, and 0.9 N (SD = 0.4) using the new approach. Although this method permits measurement of greater loads with an error less than 1 N, it is limited since the modified sensor is insensitive to loads less than 5 N. These modified sensors are nevertheless useful for directly measuring normal force applied against handles and tools and other situations involving forceful manual work activities, such as grasp, push, pull, or press that could not otherwise be measured in actual work situations.

Physicochemical parameters involved in the lethal toxicity of N,N-[(dimethylamino)ethyl]-4-substituted benzoate hydrochlorides: A QSAR study

A set of sixteen para-substituted N,N-[(dimethylamino)ethyl] benzoate hydrochlorides structurally related to procaine was synthesized. The apparent partition coefficients were determined by either shake-flask or HPLC methods and were taken as hydrophobic parameters. The IR stretching frequencies of the carbonyl group were determined in chloroform and taken as one of the electronic parameters. Additional physicochemical parameters were either taken from the literature: pi, sigma, T and R, MR4, or calculated: log P. The lethal potency was determined in the mouse via the LD50. In order to verify the nature and the relative contributions of the physicochemical parameters to lethal toxicity, QSAR equations were derived using regression analysis. A major contribution of hydrophobicity to ether with a smaller but still significant contribution of electronic or polar properties was found to a describe the toxicity within this set of compounds.

Development of alpha-SiAlON-SiC ceramic composites by liquid phase sintering

In this work, in situ alpha-SiAlON-SiC ceramic composites were obtained,by, liquid phase sintering, using SiC as reinforcement. Different beta-SiC powder contents (0-20 wt.%), were added to Si3N4-AlN-RE2O3. powder mixtures, and compacted by cold isostatic pressing. The samples were sintered at 1950 degrees C for 1 h, in N-2 atmosphere. Sintered: samples were characterized by relative density, weight loss, X-ray diffraction and scanning electron microscopy. Furthermore, mechanical properties such as hardness and fracture toughness were determined by Vickers indentation method. Lattice parameters of the alpha' phase did not considerably change with increase of SiC content. However, morphology, average grain size and aspect ratio of the alpha' phase were considerably changed with increase of the SiC content. These behavior influences significantly the mechanical properties of this hard ceramic composite. (C) 2006 Elsevier Ltd. All rights reserved.

Purification and characterization of pectin methylesterase from acerola (Malpighia glabra L.)

The enzyme pectinmethylesterase (PME) from acerola was extracted and purified by gel anion-exchange chromatography (Q Sepharose) and filtration on Sephadex G-100. The results showed two different PME isoforms (PME1 and PME2), with molecular masses of 25.10 and 5.20 kDa, respectively. PMEI specific activity increased by 9.63% after 60 min incubation at 98 degrees C, while PME2 retained 66% of its specific activity under the same conditions. The K-m values of PMEI, PME2 and concentrated PME were 0.94, 0.08 and 0.08mg mL(-1), respectively. The V-max value of PMEI, PME2 and concentrated were 204.08, 2, 158.73 and 2.92 mu mol min(-1) mg(-1) protein, respectively. (c) 2007 Society of Chemical Industry.

An adaptation of the dual-affine interior point method for the surface flatness problem

This paper presents an adaptation of the dual-affine interior point method for the surface flatness problem. In order to determine how flat a surface is, one should find two parallel planes so that the surface is between them and they are as close together as possible. This problem is equivalent to the problem of solving inconsistent linear systems in terms of Tchebyshev's norm. An algorithm is proposed and results are presented and compared with others published in the literature. (C) 2006 Elsevier B.V. All rights reserved.

Criteria for the diagnosis of diffuse uterine myohypertrophy

Objectives: Diffuse uterine myohypertrophy (DUMH) is a condition clinically diagnosed by the presence of uterine bleeding, homogeneous and diffuse uterine enlargement, and absence of any myoendometrial cause of bleeding. Since the morphologic criteria for the diagnosis of this entity are still controversial, this study aimed to investigate the clinical presentation and the morphologic findings of the cases of DUMH presenting at the University Hospital of Botucatu, São Paulo, Brazil, Methods: We retrospectively studied 43 consecutive patients with DUMH submitted to hysterectomy (test group) and compared the findings with those obtained from 28 patients submitted to hysterectomy due to a prolapsed uterus (control group). There were no significant differences in age, weight or height between the two groups. Results: the uterine weight of the DUMH group (mean +/- S.D. 157.4 +/- 46.4 g) was significantly heavier than that of the control group (99.5 +/- 35.4 g) and myometrial thickness was significantly greater in the DUMH group (2.5 +/- 0.5 cm) than in the control group (1.9 +/- 0.4 cm). No positive correlation was observed between increased uterine weight and parity, but there was a positive correlation between uterine weight and myometrial thickness. on the basis of the present study, we suggest that the diagnosis of DUMH be made clinically and in cases of uterine weight greater than or equal to 120 g and myometrial thickness greater than or equal to 2.0 cm. In addition, 10 cases of each group were analyzed by morphometry to evaluate interstitial fibrosis and myometrial hypertrophy. The data showed that the increase in uterine weight in DUMH is caused by enlargement of individual myometrial fibers rather than accumulation of interstitial collagen. Conclusion: Discriminant analysis to estimate the diagnostic significance of a number of clinical and pathologic variables (age, parity, uterine weight and morphometric parameters) was able to differentiate cases of DUMH from controls in 100% of the patients.

Renal artery clipping attenuates the progression of adriamycin nephropathy

This study was designed to analyze the impact of diminished renal perfusion pressure due to renal clipping on the rat model of adriamycin nephropathy. Male Wistar rats, divided into four groups (n = 9 per group) were injected with saline as control (C), adriamycin 3 ml/kg (Ad), saline with the left renal artery clipped (Rv), and adriamycin plus clip (AdRv). After 24 weeks mean arterial pressure (MAP), inulin, and p-aminohippurate (PAH) clearances were performed to evaluate renal function. Morphologic analysis included histologic criteria of percentage of glomerulosclerosis and tubulointerstitial lesion index (TILI). The MAP (mm Hg) was similar between Rv (143 +/- 13) and AdRv (154 +/- 20), but higher (P < .05) than C (120 +/- 8) and Ad (124 +/- 11). Inulin clearance (mL/min/100 g) in Ad (0.2 +/- 0.05) was smaller than in C (0.53 +/- 0.17) and Rv (0.4 +/- 0.01) (P < .05), and was at an intermediate level in AdRv (0.33 +/- 0.2). The level of PAH (mL/min/100 g) was normal at 1.76 in C, and diminished more in Ad (0.58) than in Rv (1.06) and AdRv (1.18) (P < .05). Both Ad and the AdRv nonclipped kidneys had the highest degree of glomerulosclerosis (33% and 25%) and TILI (7% and 8%), respectively, compared with C and Rv (both 0%), whereas the clipped kidneys displayed intermediate degrees (9% and 5%) (P < .05 v nonclipped). The data suggest that diminished perfusion pressure of the clipped kidney, by decreasing the intraglomerular pressure, protects the glomerulus from damage and attenuates the evolution of adriamycin nephropathy. Am J Hypertens 1998;11:1124-1128 (C) 1998 American Journal of Hypertension, Ltd.

Frequency of coronary artery disease in patients with renal artery stenosis without clinical manifestations of coronary insufficiency

Atherosclerotic renal artery stenosis (RAS) and coronary artery disease (CAD) arise from the same multiple risk factors. The purpose of this study was to assess the frequency of previously undiagnosed CAD in patients with angiographically confirmed RAS, by conducting coronary arteriography in the same setting. of 57 consecutive patients referred for renal arteriography on clinical grounds during a 14-month period, 28 had no RAS and 6 had RAS, but previously documented CAD. of the remainder 23 patients. 17 (74%; CI 56%-92%) had both RAS and CAD (7 single vessel, 4 two-vessel, and 7 multivessel disease). The clinical characteristics, such as age, blood pressure (BP) levels, signs of heart failure, were no different between those with and without CAD, although the 4 diabetic patients, the 4 patients with fundoscopic findings of grade III retinopathy, 11 of 14 with peripheral arterial disease, and 7 of 8 patients with prior stroke belonged in the CAD group. None developed complications as a result of the two consecutive procedures. The data suggest that in patients with RAS the frequency of silent CAD is high and cannot be predicted on clinical grounds alone, therefore coronary angiography should be routinely recommended in the same setting.

First record of petrified Permian pecopterids from the Parana Basin, Brazil (Corumbatai Formation, Passa Dois Group, northeastern State of São Paulo): Morphology, anatomy and paleoecological implications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparation and characterizations of Ba0.8Ca0.2TiO3 by complex polymerization method (CPM)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development and cytology of pollen in Dahlstedtia Malme (Leguminosae : Papilionoideae)

Microsporogenesis, chromosome number, meiotic behaviour and meiotic index were investigated in Dahlstedtia pinnata and D. pentaphylla, two legume species occurring largely in Brazil, in order to ascertain whether the pollen could limit fertilization events. Archesporial cells originate primary sporogenous and anther wall precursor cells, the tapetum is uniseriate, uninucleate and glandular. Tetrads are tetrahedric or decussate, and cytokinesis is of the simultaneous type. Mature pollen grains are tricolpate and bicellular. No abnormalities in microsporogenesis were found. In both species the chromosome number is n = 11, a number not reported previously. The base number for Dahlstedtia is also 11, because cytological observations include both species of Dahlstedtia. D. pentaphylla has a higher meiotic index and lower individual variation values, and it is considered meiotically stable. Its pollen grains do not limit fertilization. D. pinnata has a lower meiotic index, and the pollen is one of the factors which limit fertilization. Furthermore, D. pinnata has numerous adventitious shoots, which suggest that vegetative propagation is important in its reproductive process. (C) 2002 the Linnean Society of London, Botanical Journal of the Linnean Society, 2002, 138, 461-471.

On the construction of perfect codes from HEX signal constellations

Recently, minimum and non-minimum delay perfect codes were proposed for any channel of dimension n. Their construction appears in the literature as a subset of cyclic division algebras over Q(zeta(3)) only for the dimension n = 2(s)n(1), where s is an element of {0,1}, n(1) is odd and the signal constellations are isomorphic to Z[zeta(3)](n) In this work, we propose an innovative methodology to extend the construction of minimum and non-minimum delay perfect codes as a subset of cyclic division algebras over Q(zeta(3)), where the signal constellations are isomorphic to the hexagonal A(2)(n)-rotated lattice, for any channel of any dimension n such that gcd(n,3) = 1. (C) 2012 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.

On the effects of system parameters on the response of a harmonically excited system consisting of weakly coupled nonlinear and linear oscillators

This paper discusses the dynamic behaviour of a nonlinear two degree-of-freedom system consisting of a harmonically excited linear oscillator weakly connected to a nonlinear attachment having linear and cubic restoring forces. The effects of the system parameters on the shape of the frequency-response curve are investigated, in particular those yielding the appearance and disappearance of outer and inner detached resonance curves. In contrast to the case when the linear stiffness of the attachment is zero, it is found that multivaluedness occurs at low frequencies as the resonant peak bends to the right. It is also found that as the coefficient of the linear term increases, the range of parameters yielding detached curves reduces. Compared to the case when the attached system has no linear stiffness term, this range of parameters corresponds to smaller values of the damping and nonlinear coefficients. Approximate analytical expressions for the jump-up and jump-down frequencies of the system under investigation are also derived. (C) 2011 Elsevier Ltd. All rights reserved.

Association of free amino acids with caries experience and mutans streptococci levels in whole saliva of children with early childhood caries

Objective: The aim of the present study was to identify the free amino acid content in whole saliva of children with (CE) and without early childhood caries (CF) (ECC), correlating these findings with caries experience and mutans streptococci (MS) levels in saliva.Design: Seventy-eight healthy children, both genders, 6-71 months age, were selected to participate in the study. Following examination for dmft scores calculation, unstimulated whole saliva was collected from all 78 participants, stored at -80 degrees C, and used for amino acid analysis, on a Biochem 20 plus amino acid analyzer. Stimulated whole saliva was collected from 52 children, transported, diluted and plated on MSB agar medium for detection of MS in cfu/mL.Results: Forty different free amino acids were identified in whole saliva, with great variation in their concentration. A statistically significant relation was found between caries experience and the presence of free proline and glycine. While proline (p = 0.0182) was more frequently absent in the CF group, the absence of glycine (p = 0.0397) was more often observed in the CE group. In the presence of higher levels of MS, free glycine reduced the risk of experiencing dental caries (p = 0.0419). Conversely, the presence of proline was found to increase the risk of experiencing the disease (p = 0.0492).Conclusions: The presence of free proline and absence of free glycine in children with ECC, highly contaminated with MS, increased the chances of experiencing dental caries in the present population. Further studies are needed to better understand this phenomenon. (C) 2008 Elsevier Ltd. All rights reserved.

Study of the annealing temperature effect on the structural and luminescent properties of SrWO4:Eu phosphors prepared by a non-hydrolytic sol-gel process

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)