Aplicação de água ozonizada como agente sanitizante durante o processamento de café arábica

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Produção e qualidade do biogás gerado com os dejetos de diferentes espécies animais

Pós-graduação em Zootecnia - FCAV

Heart rate variability in children with type 1 diabetes mellitus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de reagentes de branqueamento na classificação e refinação de polpa de eucalipto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phosphorus reduction by sifting fish waste meal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação espaço-temporal da distribuição de fósforo na água e nos sedimentos de fundo das sub-bacias dos rios Cuiabá e São Lourenço e em algumas baias do Pantanal Matogrossense

Pós-graduação em Química - IQ

Modeling of multiple cracks in reinforced concrete members using solid finite elements with high aspect ratio

This paper presents a new technique to model interfaces by means of degenerated solid finite elements, i.e., elements with a very high aspect ratio, with the smallest dimension corresponding to the thickness of the interfaces. It is shown that, as the aspect ratio increases, the element strains also increase, approaching the kinematics of the strong discontinuity. A tensile damage constitutive relation between strains and stresses is proposed to describe the nonlinear behavior of the interfaces associated with crack opening. To represent crack propagation, couples of triangular interface elements are introduced in between all regular (bulk) elements of the original mesh. With this technique the analyses can be performed integrally in the context of the continuum mechanics and complex crack patterns involving multiple cracks can be simulated without the need of tracking algorithms. Numerical tests are performed to show the applicability of the proposed technique, studding also aspects related to mesh objectivity.

Suplementação de vitamina A em dietas para Kinguios (Carassius auratus)

Vitamin A is important to the proper development and functioning of the body, appearing in several metabolic functions. This experiment was conducted with aim evaluate to the vitamin A supplementation in diets for Goldfish Carassius auratus. The experimental was completely randomized with six treatments (0, 2.000, 4.000, 8.000, 16.000 and 32.000 IU of vitamin A kg(-1) diet) with four repetitions into 24 experimental cages, with capacity for 150 liters useful volume, made of mesh shading, installed inside a masonry circular tank with a capacity of 25 m(3) of water. 192 fish with an average initial weight of 6.66 +/- 0.57 g and initial length of 7.30 +/- 0.33 cm, feed at 8h, 11h, 14h and 17h at satiety were used. Evaluated the effects on productive performance and intensity of yellow-red coloring of the skin of the fish were. The Linear Response Plateau analysis of weight gain and length total, feed conversion and daily growth rate versus vitamin A requirement estimate showed 2,624, 2,385 and 2,358, 4,381 and 2,866 IU of vitamin A per kg diet, respectively. The data indicated that this vitamin has little or no influence on the intensity of the skin color of the Goldfish.

Dependência espacial da estabilidade de agregados e matéria orgânica do solo em cambissolo sob cultivo de cana de açucar

The soil management system can modify the natural distribution of the soil attributes and, consequently, the variability of the soil aggregation and organic matter content. Thus, the aim of this work was to evaluate the aggregate stability and organic matter content spatial distribution on a Haplic Cambisol under sugar cane cultivation in the Southern Amazonas State, Brazil. A 70 x 70 m square mesh, with regular 10 meters intervals, was designed over the cultivation area, resulting in 64 sample points. Soil blocks with preserved structure were collected at 0.0-0.2 m depth in order to analyze the aggregate stability and organic matter content. The data were submitted to the descriptive and geostatistical analysis. The soil attributes presented a spatial dependence structure and the greater range was observed for the mean weighted diameter and aggregate class <1.00 mm. Also, there is a spatial relation among the mean geometric diameter, mean weighted diameter and aggregate classes (>2.00 and 2.00-1.00 mm).

Análise de uma câmara de combustão em escala piloto através de fluidodinâmica computacional

This work aims to examine, the behavior of a combustion chamber in pilot scale, coupled to a regenerative burner. The objective is to obtain a computational domain capable of supporting a simulation of conventional combustion and flameless combustion regimes. The objective is to obtain independence of mesh, analysis of the velocity fields of the fluid within the chamber, temperature and concentration profiles of the species emitted during the combustion process

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Desenvolvimento de um protetor lateral em alumínio

In view of the need to develop a device for security and lateral protection, due to the Resolution 323/09 of CONTRAN, which requires the use of such equipment for most trucks and tow trucks, the objective of this work is to develop a project for an aluminum lateral protection device, according to the ABNT NBR 14.148 regulation, that, among many specifications, stipulates that the equipment must support a load of 5 kN and suffer a maximum deflection of 30mm, but does not say what material it should be made of. The reason for choosing aluminum is because of its low density, so as not to significantly increase the curb weight of the truck, which, consequently, reduces CO2 emissions and maintenance expenses. Additionally, this material presents a good resistance/weight ratio, high resistance to corrosion, excellent surface finish and it's fully recyclable; reason why it has been gaining the attention of many industry segments. For the realization of the project, profiles were chosen to make the assembly of the set, and then a finite elements analysis was performed in the HyperWorks software, to verify if the designed device would support the loads stipulated by the regulation. One details to note is that these simulation programs could show inaccuracies, because of the size and shape of the elements that compose the mesh, and for many other reasons, so it is necessary that, even with the results coming back satisfactory, actual physical tests are conducted to validate the proper functioning of the equipment, which was not done for this study

Simplificação de malhas visando representações em multirresolução

The representation of real objects in virtual environments has applications in many areas, such as cartography, mixed reality and reverse engineering. The generation of these objects can be performed through two ways: manually, with CAD (Computer Aided Design) tools, or automatically, by means of surface reconstruction techniques. The simpler the 3D model, the easier it is to process and store it. However, this methods can generate very detailed virtual elements, that can result in some problems when processing the resulting mesh, because it has a lot of edges and polygons that have to be checked at visualization. Considering this context, it can be applied simplification algorithms to eliminate polygons from resulting mesh, without change its topology, generating a lighter mesh with less irrelevant details. The project aimed the study, implementation and comparative tests of simplification algorithms applied to meshes generated through a reconstruction pipeline based on point clouds. This work proposes the realization of the simplification step, like a complement to the pipeline developed by (ONO et al., 2012), that developed reconstruction through cloud points obtained by Microsoft Kinect, and then using Poisson algorithm

Avaliação das condições de contorno da teoria de Hertz, comparando os resultados analíticos e numéricos a partir de simulações em software de elementos finitos

The objective of this study was to present the comparison between analytical and numerical results trying to identify the differences and behaviors of the variation of the principal stresses and the maximum contact pressure for different model configurations. The analytical equations of the theory of Hertz from the boundary conditions adopted by him were differences are shown. A step-by-step of developing the model indicating the geometric dimensions, surface contact, type of contact, the formulation used by the software, type of mesh, as well as the boundary conditions and load was presented. In the results, the stresses calculated analytically and compared with the stresses obtained by the finite element simulation software indicating the changes have been made

Lixamento do Pinus elliotti com carbeto de silício e óxido de aluminio

The Sanding is a complex process involving many variables that affect the quality of the part produced, working mainly in the timber industry in the production of panels (MDF, MDP, HDF, etc...) and furniture. However, these industries use the sanding process empirically, not optimizing it. The aim of this study was to compare the behavior of sandpaper white aluminum oxide (OA-white) and Black silicon carbide (SiC-black), analyzing variables in the process as: strength, power, emission, vibration, wear particle size of sanding, and its consequences on the surface finish of the workpiece. Made the process of plane grinding samples of Pinus elliottii, processed in parallel to the fibers, which were sanded with sandpaper grain OA white and black 3-SiC abrasive conditions (new, moderately eroded and severely eroded) grain sizes in 3 (80, 100, and 120 mesh). 6 replicates was performed for each condition tested. Each trial was captured output variables of the sanding process: strength, power, emission and vibration. With two stages totaling 108 trials. After the sanded samples, it has the same surface quality by raising the surface roughness Ra. Through experiment, it can be concluded that abrasives OA-white tended to have higher strength, power, emissions and less vibration in the sanding process, compared to the SiC-black. However, surface finish exhibited similar to the particle size of 80 to 100 mesh, worn abrasive conditions. However, the particle size of 120 mesh, obtained by the roughness of sandpaper OA-bank was higher compared to SiC-black to all conditions of sandpaper due to its toughness