Taenia saginata: Production and characterization of monoclonal antibodies against Taenia saginata metacestode antigens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema de produção misto de caprino na região central do estado do Rio Grande do Norte

This study aimed to evaluate the performance and profitability of Canindé goats kept under semi-intensive management in mix farming system. 84 animals were used, being 81 does e three bucks.. The means of fertility rate at parturition, prolificacy and percentages of pregnant, kid survival and reproductive rate were compared by Tukey test at significance level of 5.0%. The kid weights from birth to weaning were submitted to variance analysis considering sex and birth type and the means were compared by Tukey test at 5.0% of significance. The percentages of fertility rate by ultrassographic were 91.36 and parturition 74.84. The prolificacy was 1.53. Independently of sex the mortality rate of kids from birth to weaning was 12.3. The average weights of offspring were 2.11 and 1.92 kg and 6.74 and 6.84 kg for male and female offspring at birth and weaning, in this order. The average weights of kids, meaning PN, P28, P56, P63, in the first season of kidding were 2.11 ± 0.46 kg, 3.63 ± 1.04 kg, 5.96 ± 158 kg and 6.74 ± 1.79 kg. There was significant differences (P<0,05) only to birth weight of kids sons of buck 135. However, the fertility at parturition for first and second breeding seasons (BS) were 87.65 and 62.96, respectively (P<0.05). The prolificacy was 1.58 and 1.47 to first and second BS in this order. The percentages of offspring survival from birth to weaning, to first and second BS were 92.86 and 80.00, respectively. From the first BS the reproduction rate was 1.28 while in the second was 0.74. After weaning the duration of lactation was 104 days to first breeding parturition and 38 days in the second one. The total milk production was 853.50 kg. The kids weight gain was influenced by season of year, wet and dry and buck (P<0.05). Were concluded that the seasons of year when breeding season and parturition occur strongly affected the productive performance and profitability of production system

Surface characteristics analysis of polypropylene treated by dielectric barrier discharge at atmospheric pressure

Polypropylene (PP) samples were treated by Dielectric Barrier Discharge (DBD) in order to modify their surface characteristics. The XPS analysis reveals that the DBD treatment added oxygen atoms to the PP surface. These polar groups cause increase in the wettability as shown by water contact angle measurements. The formation of low-molecular-weight oxidized materials (LMWOMs) in the form of small nodules on the PP surface was observed by atomic force microscopy (AFM). The presence of oxygen polar groups on the PP surface was also confirmed by infrared spectroscopy (FTIR). All analysis were performed before and after rinsing the treated samples in water and showed that the LMWOM can be removed from the surface by polar solvents.

Alquilação redutiva da quitosana a partir do glutaraldeído e 3-amino-1-pr

Chitosan derivatives were prepared by reductive alkylation using glutaraldehyde and 3-amino-1-propanol. The reducing agent used was the sodium borohydride. Tests of solubility, stability and viscosity were performed in order to evaluate these parameters effects in the reaction conditions (molar ratio of the reactants and presence of nitrogen in the reaction system). The molecular structure of commercial chitosan was determined by infrared (IR) and hydrogen nuclear magnetic resonance spectroscopy (1H NMR). The intrinsic viscosity and average molecular weight of the chitosan were determined by viscosimetry in 0.3 M acetic acid aqueous solution 0.2 M sodium acetate at 25 ºC. The derivatives of chitosan soluble in aqueous acidic medium were characterized by 1H NMR. The rheological behavior of the chitosan and of the derivative of chitosan (sample QV), which presented the largest viscosity, were studied as a function of polymer concentration, temperature and ionic strength of the medium. The results of characterization of the commercial chitosan (the degree of deacetylation obtained equal 78.45 %) used in this work confirmed a sample of low molar weight (Mv = 3.57 x 104 g/mol) and low viscosity (intrinsic viscosity = 213.56 mL/g). The chemical modification of the chitosan resulted in derivatives with thickening action. The spectra of 1H NMR of the soluble derivatives in acid aqueous medium suggested the presence of hydrophobic groups grafted into chitosan in function of the chemical modification. The solubility of the derivatives of chitosan in 0.25 M acetic acid aqueous solution decreased with increase of the molar ratio of the glutaraldehyde and 3-amino-1-propanol in relation to the chitosan. The presence of nitrogen and larger amount of reducing agent in reaction system contributed to the increase of the solubility, the stability and the viscosity of the systems. The viscosity of the polymeric suspensions in function of the shear rate increased significantly with polymer concentration, suggesting the formation of strong intermolecular associations. The chitosan presented pseudoplastic behavior with the increase in polymer concentration at a low shear rate. The derivative QV presented pseudoplastic behavior at all concentrations used and in a large range of shear rate. The viscosity of chitosan in solution decreased with an increase of the temperature and with the presence of salt. However, there was an increase of the viscosity of the chitosan solution at higher temperature (65 ºC) and ionic strength of the medium which were promoted by hydrophobic associating of the acetamide groups. The solutions of the chitosan derivatives (sample QV) were significantly more viscous than chitosan solution and showed higher thermal stability in the presence of salt as a function of the hydrophobic groups grafted into chitosan backbone

Structural characterization of wild rubbers, microstructure of the rubber extracted from ficus elastica by C-13-NMR

Low molecular weight fractions of polyisoprene extracted from Ficus elastica Herb. ex Hornem. were studied by C-13-NMR. The identification of 2-3 trans terminal units at the end of the polymer chain needed the acquisition of more than 17 000 transients. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

On the characterisation of electrically stressed polyethylene before and after chemical treatment

Low-density polyethylene (LDPE) was characterised for its dielectric and electrical properties before and after chemical treatment. A reduction in the permittivity and dielectric loss was observed in the polymer after treatment with hexane. The intensity in the Raman Spectrum in the disordered longitudinal acoustic mode region (DLAM) also was reduced due to a hexane treatment. Using thermally stimulated discharge current (TSDC) and laser-intensity-modulated method (LIMM) techniques it was observed that charge injection can be enhanced in the polymer matrix in the empty sites, created by the removal of the low molecular weight impurities with chemical treatment. (C) 2002 Kluwer Academic Publishers.

Interações entre a carboximetilcelulose, carbonato de cálcio e bentonita: repercussões sobre as propriedades dos fluidos de perfuração aquosos

The role of carboxymethylcellulose (CMC) in association to calcium carbonate particles (CaCO3) in most water-based drilling fluids is to reduce the fluid loss to the surrounding formation. Another essential function is to provide rheological properties capable of maintaining in suspension the cuttings during drilling operation. Therefore, it is absolutely essential to correlate the polymer chemical structure (degree of substitution, molecular weight and distribution of substituent) with the physical-chemical properties of CaCO3, in order to obtain the better result at lower cost. Another important aspect refers to the clay hydration inhibitive properties of carboxymethylcellulose (CMC) in drilling fluids systems. The clay swelling promotes an undesirable damage that reduces the formation permeability and causes serious problems during the drilling operation. In this context, this thesis consists of two main parts. The first part refers to understanding of interactions CMC-CaCO3, as well as the corresponding effects on the fluid properties. The second part is related to understanding of mechanisms by which CMC adsorption occurs onto the clay surface, where, certainly, polymer chemical structure, ionic strength, molecular weight and its solvency in the medium are responsible to affect intrinsically the clay layers stabilization. Three samples of carboximetilcellulose with different molecular weight and degree of substitution (CMC A (9 x 104 gmol DS 0.7), CMC B (2.5 x 105 gmol DS 0.7) e CMC C (2.5 x 105 gmol DS 1.2)) and three samples of calcite with different average particle diameter and particle size distribution were used. The increase of CMC degree of substitution contributed to increase of polymer charge density and therefore, reduced its stability in brine, promoting the aggregation with the increase of filtrate volume. On the other hand, the increase of molecular weight promoted an increase of rheological properties with reduction of filtrate volume. Both effects are directly associated to hydrodynamic volume of polymer molecule in the medium. The granulometry of CaCO3 particles influenced not only the rheological properties, due to adsorption of polymers, but also the filtration properties. It was observed that the lower filtrate volume was obtained by using a CaCO3 sample of a low average size particle with wide dispersion in size. With regards to inhibition of clay swelling, the CMC performance was compared to other products often used (sodium chloride (NaCl), potassium chloride (KCl) and quaternary amine-based commercial inhibitor). The low molecular weight CMC (9 x 104 g/mol) showed slightly lower swelling degree compared to the high molecular weight (2.5 x 105 g/mol) along to 180 minutes. In parallel, it can be visualized by Scanning Electron Microscopy (SEM) that the high molecular weight CMC (2.5 x 105 g/mol e DS 0.7) promoted a reduction in pores formation and size of clay compared to low molecular weight CMC (9.0 x 104 g/mol e DS 0.7), after 1000 minutes in aqueous medium. This behavior was attributed to dynamic of interactions between clay and the hydrodynamic volume of CMC along the time, which is result of strong contribution of electrostatic interactions and hydrogen bounds between carboxylate groups and hydroxyls located along the polymer backbone and ionic and polar groups of clay surface. CMC adsorbs on clay surface promoting the skin formation , which is responsible to minimize the migration of water to porous medium. With the increase of degree of substitution, it was observed an increase of pores onto clay, suggesting that the higher charge density on polymer is responsible to decrease its flexibility and adsorption onto clay surface. The joint evaluation of these results indicate that high molecular weight is responsible to better results on control of rheological, filtration and clay swelling properties, however, the contrary effect is observed with the increase of degree of substitution. On its turn, the calcite presents better results of rheological and filtration properties with the decrease of average viii particle diameter and increase of particle size distribution. According to all properties evaluated, it has been obvious the interaction of CMC with the minerals (CaCO3 and clay) in the aqueous medium

Screening and Production Study of Microbial Xylanase Producers from Brazilian Cerrado

Hemicelluloses are polysaccharides of low molecular weight containing 100 to 200 glycosidic residues. In plants, the xylans or the hemicelluloses are situated between the lignin and the collection of cellulose fibers underneath. The xylan is the most common hemicellulosic polysaccharide in cell walls of land plants, comprising a backbone of xylose residues linked by beta-1,4-glycosidic bonds. So, xylanolytic enzymes from microorganism have attracted a great deal of attention in the last decade, particularly because of their biotechnological characteristics in various industrial processes, related to food, feed, ethanol, pulp, and paper industries. A microbial screening of xylanase producer was carried out in Brazilian Cerrado area in Selviria city, Mato Grosso do Sul State, Brazil. About 50 bacterial strains and 15 fungal strains were isolated from soil sample at 35 A degrees C. Between these isolated microorganisms, a bacterium Lysinibacillus sp. and a fungus Neosartorya spinosa as good xylanase producers were identified. Based on identification processes, Lysinibacillus sp. is a new species and the xylanase production by this bacterial genus was not reported yet. Similarly, it has not reported about xylanase production from N. spinosa. The bacterial strain P5B1 identified as Lysinibacillus sp. was cultivated on submerged fermentation using as substrate xylan, wheat bran, corn straw, corncob, and sugar cane bagasse. Corn straw and wheat bran show a good xylanase activity after 72 h of fermentation. A fungus identified as N. spinosa (strain P2D16) was cultivated on solid-state fermentation using as substrate source wheat bran, wheat bran plus sawdust, corn straw, corncob, cassava bran, and sugar cane bagasse. Wheat bran and corncobs show the better xylanase production after 72 h of fermentation. Both crude xylanases were characterized and a bacterial xylanase shows optimum pH for enzyme activity at 6.0, whereas a fungal xylanase has optimum pH at 5.0-5.5. They were stable in the pH range 5.0-10.0 and 5.5-8.5 for bacterial and fungal xylanase, respectively. The optimum temperatures were 55C and 60 A degrees C for bacterial and fungal xylanase, respectively, and they were thermally stable up to 50 A degrees C.

Efeito da heparina sódica e da enoxaparina na consolidação de fratura da tíbia no rato: avaliação clínica e anatomopatológica e biomecânica

Foi realizado estudo experimental em ratos para avaliar o efeito do anticoagulante na consolidação óssea, conforme critérios clínicos, anatomopatológicos e biomecânicos. Manualmente, após perfuração do osso, foi produzida fratura aberta, na diáfise da tíbia direita, mantida sem imobilização, em 72 ratos machos da linhagem Wistar, com 60 dias de idade e peso médio de 242 gramas. Doze horas após a fratura, foi iniciado tratamento anticoagulante, mantido por 28 dias. Via subcutânea, um grupo recebeu heparina sódica na dose de 200UI/Kg de 12 em 12 horas, enquanto outro, recebeu enoxaparina na dose de 1mg/Kg de 12 em 12 horas, doses preconizadas para tratamento do tromboembolismo em humanos. O terceiro grupo, controle, recebeu água destilada. Durante o experimento, os animais foram avaliados clinicamente e após 28 dias, sacrificados. Nos animais dos três grupos, a evolução clínica foi semelhante. Mediante análise anatomopatológica efetuada por estudo descritivo e quantitativo, foi observada presença de fibrose, cartilagem e osso igualmente nos três grupos, sempre com predomínio de tecido ósseo. O estudo biomecânico, realizado por intermédio de ensaios de flexão, demonstrou coeficiente de rigidez e carga máxima semelhantes nos três grupos. Nenhuma diferença clínica, anatomopatológica e biomecânica foi encontrada, resultando todas as fraturas em consolidação de acordo com os critérios adotados, concluindo-se, portanto, que a heparina sódica e a enoxaparina nas doses, via e tempo de administração utilizados não interfiriram na consolidação da fratura da tíbia do rato.

Trombose venosa profunda de membros superiores: estudo coorte retrospectivo de 52 casos

OBJETIVO: Rever os fatores predisponentes e a evolução em série de casos de trombose venosa profunda dos membros superiores de nossa instituição. MÉTODOS: Cinqüenta e dois pacientes consecutivos, com trombose venosa profunda dos membros superiores (29 homens e 23 mulheres), idade média de 52,3 anos, documentados por mapeamento dúplex (71,1%), flebografia (11,1%) ou clinicamente (15,6%), foram incluídos no presente estudo. RESULTADOS: As manifestações clínicas foram: dor no antebraço (24 casos - 46,1%), dor no braço (27 casos - 51,9%), edema do membro superior (45 casos - 86,5%), dor à compressão do membro superior (36 casos - 70,2%) e dor à movimentação do mesmo (32 casos - 61,7%). Os principais fatores de risco foram: punção ou acesso venoso (20 casos - 39,1%) e câncer (16 casos - 32,6%). As veias envolvidas foram: umeral (n = 18), axilar (n = 27), subclávia (n = 15) e jugular (n = 11). A embolia pulmonar estava inicialmente presente em quatro casos (7,6%). O tratamento inicial foi feito com heparina não-fracionada intravenosa (64,3%), subcutânea (16,7%), ou heparina de baixo peso molecular (17,1%), seguido de varfarina. Doze pacientes morreram antes da alta, em função de causas não relacionadas à embolia pulmonar. Foram acompanhados os 40 pacientes restantes por período de 3 meses a 10 anos, sendo que dois morreram de causas não relacionadas à embolia pulmonar, um paciente desenvolveu seqüelas pós-trombóticas, como edema residual e limitações aos movimentos, e seis ficaram com discretos sintomas residuais (edema e dor). CONCLUSÕES: A trombose venosa profunda dos membros superiores foi mais freqüente em pacientes submetidos a acessos venosos e com neoplasia em atividade. Comparando com dados da literatura, a evolução dos pacientes sob tratamento exclusivo com anticoagulantes foi, no mínimo, similar a outros tratamentos propostos.

Significance of large nuclear vacuoles in human spermatozoa: implications for ICSI

The aim of this study was to determine the extent of DNA fragmentation and the presence of denatured single-stranded or normal double-stranded DNA in spermatozoa with large nuclear vacuoles (LNV) selected by high magnification. Fresh semen samples from 30 patients were prepared by discontinuous isolate concentration gradient. Spermatozoa with normal nucleus (NN) and LNV were selected at x8400 magnification and placed on different slides. DNA fragmentation was determined by TUNEL assay. Denatured and double-stranded DNA was identified by the acridine orange fluorescence method. DNA fragmentation in spermatozoa with LNV (29.1%) was significantly higher (P < 0.001) than in spermatozoa with NN (15.9%). Therefore, cleavage of genomic DNA in low molecular weight DNA fragments (mono- and oligonucleosomes), and single-strand breaks (nicks) in high molecular weight DNA occur more frequently in spermatozoa with LNV. Similarly, the percentage of denatured-stranded DNA in spermatozoa with LNV (67.9%) was significantly higher (P < 0.0001) than in spermatozoa with NN (33.1%). The high level of denatured DNA in spermatozoa with LNV suggests precocious decondensation and disaggregation of sperm chromatin fibres. The results show an association between LNV and DNA damage in spermatozoa, and support the routine morphological selection and injection of motile spermatozoa at high magnification for ICSI.

Impact of maternal mild hyperglycemia on maternal care and offspring development and behavior of Wistar rats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Animal models for clinical and gestational diabetes: maternal and fetal outcomes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A multidisciplinary program of preparation for childbirth and motherhood: maternal anxiety and perinatal outcomes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Is urine interleukin-8 level a reliable laboratory test for diagnosing late onset sepsis in premature infants?

The present study is aimed to determine serum and urine interleukin-8 (IL-8) levels in premature infants with late onset sepsis (LOS) and to evaluate if urine IL-8 is a useful test for LOS diagnosis. Fifty-six premature infants admitted to the NICU over 1 year had serum and urine IL-8 determined by ELISA. They were divided into three groups: I definite sepsis, II probable sepsis and III non-infected. Results were expressed as mean or median. Differences between groups were assessed by ANOVA, Kruskal-Wallis ANOVA and Dunns Method. Sensitivity, specificity and positive and negative predictive values were calculated and a receiver operator characteristic curve was constructed to determine serum and urine IL-8 accuracy. There were no differences between groups for birth weight, and gestational and post-natal age. Median serum and urine IL-8 levels were significantly higher in GI and GII: 929 x 906 x 625pg/ml; P=0.024, and 249 x 189 x 42pg/mgCr; P< 0.001. Optimal cut-off point was 625pg/ml for serum IL-8 with 69 sensitivity and 75pg/mgCr for urine IL-8 with 92 sensitivity. IL-8 can be determined in urine from premature infants with LOS and is an accurate and feasible diagnosis method.