Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.  

Non-linear Dynamic Analysis of a Piezoelectrically Actuated Flapping Wing

An energy method is used in order to derive the non-linear equations of motion of a smart flapping wing. Flapping wing is actuated from the root by a PZT unimorph in the piezofan configuration. Dynamic characteristics of the wing, having the same size as dragonfly Aeshna Multicolor, are analyzed using numerical simulations. It is shown that flapping angle variations of the smart flapping wing are similar to the actual dragonfly wing for a specific feasible voltage. An unsteady aerodynamic model based on modified strip theory is used to obtain the aerodynamic forces. It is found that the smart wing generates sufficient lift to support its own weight and carry a small payload. It is therefore a potential candidate for flapping wing of micro air vehicles.

Geometrically simple linear weirs using circular quadrants

A detailed theoretical analysis of flow through a quadrant plate weir is made in the light of the generalized theory of proportional weirs, using a numerical optimization procedure. It is shown that the flow through the quadrant plate weir has a linear discharge-head relationship valid for certain ranges of head. It is shown that the weir is associated with a reference plane or datum from which all heads are reckoned.Further, it is shown that the measuring range of the quadrant plate weir can be considerably enhanced by extending the tangents to the quadrants at the terminals of the quadrant plate weir. The importance of this weir (when the datum of the weir lies below its crest) as an outlet weir for grit chambers is highlighted. Experiments show excellent agreement with the theory by giving a constant average coefficient of discharge.

Methods and applications for improving parameter prediction models for stand structures in Finland

This thesis report attempts to improve the models for predicting forest stand structure for practical use, e.g. forest management planning (FMP) purposes in Finland. Comparisons were made between Weibull and Johnson s SB distribution and alternative regression estimation methods. Data used for preliminary studies was local but the final models were based on representative data. Models were validated mainly in terms of bias and RMSE in the main stand characteristics (e.g. volume) using independent data. The bivariate SBB distribution model was used to mimic realistic variations in tree dimensions by including within-diameter-class height variation. Using the traditional method, diameter distribution with the expected height resulted in reduced height variation, whereas the alternative bivariate method utilized the error-term of the height model. The lack of models for FMP was covered to some extent by the models for peatland and juvenile stands. The validation of these models showed that the more sophisticated regression estimation methods provided slightly improved accuracy. A flexible prediction and application for stand structure consisted of seemingly unrelated regression models for eight stand characteristics, the parameters of three optional distributions and Näslund s height curve. The cross-model covariance structure was used for linear prediction application, in which the expected values of the models were calibrated with the known stand characteristics. This provided a framework to validate the optional distributions and the optional set of stand characteristics. Height distribution is recommended for the earliest state of stands because of its continuous feature. From the mean height of about 4 m, Weibull dbh-frequency distribution is recommended in young stands if the input variables consist of arithmetic stand characteristics. In advanced stands, basal area-dbh distribution models are recommended. Näslund s height curve proved useful. Some efficient transformations of stand characteristics are introduced, e.g. the shape index, which combined the basal area, the stem number and the median diameter. Shape index enabled SB model for peatland stands to detect large variation in stand densities. This model also demonstrated reasonable behaviour for stands in mineral soils.

Nucleosomes on linear duplex DNA allow homologous pairing but prevent strand exchange promoted by RecA protein

To understand the molecular basis of gene targeting, we have studied interactions of nucleoprotein filaments comprised of single-stranded DNA and RecA protein with chromatin templates reconstituted from linear duplex DNA and histones. We observed that for the chromatin templates with histone/DNA mass ratios of 0.8 and 1.6, the efficiency of homologous pairing was indistinguishable from that of naked duplex DNA but strand exchange was repressed. In contrast, the chromatin templates with a histone/DNA mass ratio of 9.0 supported neither homologous pairing nor strand exchange. The addition of histone H1, in stoichiometric amounts, to chromatin templates quells homologous pairing. The pairing of chromatin templates with nucleoprotein filaments of RecA protein-single-stranded DNA proceeded without the production of detectable networks of DNA, suggesting that coaggregates are unlikely to be the intermediates in homologous pairing. The application of these observations to strategies for gene targeting and their implications for models of genetic recombination are discussed.

The Tourism-Development Nexus in Namibia : A Study on National Tourism Policy and Local Tourism Enterprises' Policy Knowledge

The tourism development nexus in southern Africa involves highly topical issues related to tourism planning, power relations, community participation, and natural resources. Namibia offers a particularly interesting context for the study of these issues due to its colonial legacy, vast tourism potential, recently adopted tourism policy and community-based approaches to tourism and natural resource management. This study is an interdisciplinary endeavour to analyse the role of tourism in Namibia s post-apartheid transformation process by focusing on Namibian tourism policy and local tourism enterprises' policy knowledge. Major attention is paid to how the tourism policy's national development objectives are understood and conceptualised by the representatives of different tourism enterprises and the ways in which they relate to the practical needs of the enterprises. Through such local policy knowledge the study explores various opportunities, challenges and constraints related to the promotion of tourism as a development strategy. The study utilises a political economy approach to tourism and development through three current and interrelated discourses which are relevant in the Namibian context. These are tourism, power and inequality, tourism and sustainable development, and tourism and poverty reduction. The qualitative research material was gathered in Namibia in 2006-2007 and 2008. This material consists of 34 semi-structured interviews in 16 tourism enterprises, including private trophy hunting farms and private lodges, small tour operators and community-based tourism enterprises. In addition, the research material consists of observations in the enterprises, and 37 informal and 23 expert interviews. The findings indicate that in the light of local tourism enterprises the tourism policy objectives appear more complex and ambiguous. Furthermore, they involve multiple meanings and interpretations which reflect the socio-economic stratification of the informants and Namibian society, together with the professional stratification of the tourism enterprises and restrictions on the capacity of tourism to address the development objectives. In the light of such findings it is obvious that aspects of power and inequality affect the tourism development nexus in Namibia. The study concludes that, as in the case of other southern African countries, in order to promote sustainable development and reduce poverty, Namibia should not only target tourism growth but pay attention to who benefits from that growth and how. From a political economy point of view, it is important that prevailing structural challenges are addressed equally in the planning of tourism, development and natural resource management. Such approach would help the Namibian majority to enjoy the benefits of increasing tourism in the country.

A formate bridged Ni(II) sheet and its 3D analogue in presence of a linear organic linker: Synthesis, crystal structure and magnetic properties

Reaction of formamide with Ni(NO3)(2)center dot 6H(2)O under hydrothermal condition in a mixture of MeOH/H2O forms a two-dimensional formate bridged sheet Ni(HCOO)(2)(MeOH)(2) (1). X-ray structure analysis reveals the conversion of formamide to formate which acts as a bridging ligand in complex 1 where the axial sites of Ni(II) are occupied by methanol used as a solvent. An analogous reaction in presence of 4,4'-bipyridyl (4,4'-bipy) yielded a three-dimensional structure Ni(HCOO)(2)(4,4'-bpy) (2). DC magnetic measurements as a function of temperature and field established the presence of spontaneous magnetization with T-c (Curie temperature) = 17 and 20.8 K in 1 and 2, respectively, which can be attributed due to spin-canting. DFT calculations were performed to corroborate the magnetic results of 1 and 2. (C) 2010 Elsevier Ltd. All rights reserved.

Whose ETSIP? National and local ownership of Namibia's education and training sector improvement programme

Tämä työ tarkastelee kansallista ja paikallista omistajuutta Namibian opetussektorin kehittämisohjelmassa. Opetussektorin kehittämisohjelma ETSIP on 15-vuotinen sektoriohjelma vuosille 2005-2015 ja sen tavoitteena on edesauttaa Namibian kehittymistä tietoyhteiskunnaksi. Tutkimuksen tarkoituksena on selvittää miten kansallinen ja paikallinen omistajuus on toteutunut ETSIP prosessin aikana. Erityisesti pyritään selvittämään paikallistason opetussektorin virkamiesten näkemyksiä ETSIP prosessista, heidän roolistaan siinä ja siitä millaisia vaikuttamisen ja hallinnan mahdollisuuksia heillä on ollut prosessin aikana. Tutkimuksen lähtökohta on laadullinen ja lähestymistapa konstruktionistinen: tutkimus tarkastelee todellisuutta ihmisten kokemusten, näkemysten ja toiminnan kautta. Tutkimusaineisto koostuu haastatteluista, epävirallisista keskusteluista, lehtiartikkeleista ja ETSIP dokumenteista. Tutkimus osoittaa että kansallinen omistajuus on epämääräinen käsite sillä kansallisia toimijoita ja näkemyksiä on useita. Tutkimus vahvistaa Castel-Brancon huomion siitä, että omistajuutta on tarkasteltava kontekstissaan: muuttuvana ja kilpailtuna. ETSIPin rinnalle ollaan valmistelemassa uutta strategista ohjelmaa opetusministeriölle mikä saattaa muuttaa omistajuutta ETSIPiin. ETSIP dokumenttien omistajuusretoriikka myötäilee kansainvälisiä sitoumuksia avun vaikuttavuuden parantamiseksi mutta niistä puuttuu syvällisempi analyysi siitä, miten kansallinen ja paikallinen omistajuus toteutuisi käytännössä. Avunantajien näkemys omistajuudesta on suppea: omistajuus nähdään lähinnä sitoutumisena ennalta määrättyyn politiikkaohjelmaan. Haastatteluaineistosta nousee esiin Whitfieldin ja Frazerin jaottelu suppeista ja laajoista omistajuuskäsityksistä. Sitoutumista ETSIP ohjelmaan pidetään tärkeänä mutta riittämättömänä määritteenä omistajuudelle. Paikallisella tasolla sitoutuminen ETSIP ohjelman periaatteisiin ja tavoitteisiin on toteutunut melko hyvin mutta jos omistajuutta tarkastellaan laajemmin vaikutusvallan ja hallinnan käsitteiden kautta voidaan todeta että omistajuus on ollut heikkoa. Paikallisella tasolla ei ole ollut juurikaan vaikutusvaltaa ETSIP ohjelman sisältöön eikä mahdollisuutta hallita ohjelman toteutusta ja päättää siitä mitä hankkeita ohjelman kautta rahoitetaan. Tujanin demokraattisen omistajuuden käsite kuvaa tarvetta muuttaa ja laajentaa omistajuusajattelua huomioiden paikallisen tason paremmin. Tämä tutkimus viittaa siihen että omistajuuden toteutuminen paikallisella tasolla edellyttäisi institutionaalisen kulttuurin muutosta ja institutionaalisen legitimiteetin vahvistamista. Omistajuuden mahdollistamiseksi paikallisella tasolla tarvittaisiin poliittista johtajuutta, luottamusta, vastuullisuuden kulttuurin kehittämistä, tehokkaampaa tiedonjakoa, laajaa osallistumista, vuoropuhelua ja yhteistyötä. Ennen kaikkea tarvittaisiin paikallisen tason vaikutusvaltaa päätöksenteossa ja kontrollia resurssien käytöstä. Tälle muutokselle on selvä tarve ja tilaus.

Polarization studies in electromagnetic scattering by small Solar-system particles

In remote-sensing studies, particles that are comparable to the wavelength exhibit characteristic features in electromagnetic scattering, especially in the degree of linear polarization. These features vary with the physical properties of the particles, such as shape, size, refractive index, and orientation. In the thesis, the direct problem of computing the unknown scattered quantities using the known properties of the particles and the incident radiation is solved at both optical and radar spectral regions in a unique way. The internal electromagnetic fields of wavelength-scale particles are analyzed by using both novel and established methods to show how the internal fields are related to the scattered fields in the far zone. This is achieved by using the tools and methods that were developed specifically to reveal the internal field structure of particles and to study the mechanisms that relate the structure to the scattering characteristics of those particles. It is shown that, for spherical particles, the internal field is a combination of a forward propagating wave with the apparent wavelength determined by the refractive index of the particle, and a standing wave pattern with the apparent wavelength the same as for the incident wave. Due to the surface curvature and dielectric nature of the particle, the incident wave front undergoes a phase shift, and the resulting internal wave is focused mostly at the forward part of the particle similar to an optical lens. This focusing is also seen for irregular particles. It is concluded that, for both spherical and nonspherical particles, the interference at the far field between the partial waves that originate from these concentrated areas in the particle interior, is responsible for the specific polarization features that are common for wavelength-scale particles, such as negative values and local extrema in the degree of linear polarization, asymmetry of the phase function, and enhancement of intensity near the backscattering direction. The papers presented in this thesis solve the direct problem for particles with both simple and irregular shapes to demonstrate that these interference mechanisms are common for all dielectric wavelength-scale particles. Furthermore, it is shown that these mechanisms can be applied to both regolith particles in the optical wavelengths and hydrometeors at microwave frequencies. An advantage from this kind of study is that it does not matter whether the observation is active (e.g., polarimetric radar) or passive (e.g., optical telescope). In both cases, the internal field is computed for two mutually perpendicular incident polarizations, so that the polarization characteristics can then be analyzed according to the relation between these fields and the scattered far field.

Optimisation problems in wireless sensor networks

This thesis studies optimisation problems related to modern large-scale distributed systems, such as wireless sensor networks and wireless ad-hoc networks. The concrete tasks that we use as motivating examples are the following: (i) maximising the lifetime of a battery-powered wireless sensor network, (ii) maximising the capacity of a wireless communication network, and (iii) minimising the number of sensors in a surveillance application. A sensor node consumes energy both when it is transmitting or forwarding data, and when it is performing measurements. Hence task (i), lifetime maximisation, can be approached from two different perspectives. First, we can seek for optimal data flows that make the most out of the energy resources available in the network; such optimisation problems are examples of so-called max-min linear programs. Second, we can conserve energy by putting redundant sensors into sleep mode; we arrive at the sleep scheduling problem, in which the objective is to find an optimal schedule that determines when each sensor node is asleep and when it is awake. In a wireless network simultaneous radio transmissions may interfere with each other. Task (ii), capacity maximisation, therefore gives rise to another scheduling problem, the activity scheduling problem, in which the objective is to find a minimum-length conflict-free schedule that satisfies the data transmission requirements of all wireless communication links. Task (iii), minimising the number of sensors, is related to the classical graph problem of finding a minimum dominating set. However, if we are not only interested in detecting an intruder but also locating the intruder, it is not sufficient to solve the dominating set problem; formulations such as minimum-size identifying codes and locating–dominating codes are more appropriate. This thesis presents approximation algorithms for each of these optimisation problems, i.e., for max-min linear programs, sleep scheduling, activity scheduling, identifying codes, and locating–dominating codes. Two complementary approaches are taken. The main focus is on local algorithms, which are constant-time distributed algorithms. The contributions include local approximation algorithms for max-min linear programs, sleep scheduling, and activity scheduling. In the case of max-min linear programs, tight upper and lower bounds are proved for the best possible approximation ratio that can be achieved by any local algorithm. The second approach is the study of centralised polynomial-time algorithms in local graphs – these are geometric graphs whose structure exhibits spatial locality. Among other contributions, it is shown that while identifying codes and locating–dominating codes are hard to approximate in general graphs, they admit a polynomial-time approximation scheme in local graphs.

A local 2-approximation algorithm for the vertex cover problem

We present a distributed 2-approximation algorithm for the minimum vertex cover problem. The algorithm is deterministic, and it runs in (Δ + 1)2 synchronous communication rounds, where Δ is the maximum degree of the graph. For Δ = 3, we give a 2-approximation algorithm also for the weighted version of the problem.

A simple local 3-approximation algorithm for vertex cover

We present a local algorithm (constant-time distributed algorithm) for finding a 3-approximate vertex cover in bounded-degree graphs. The algorithm is deterministic, and no auxiliary information besides port numbering is required. (c) 2009 Elsevier B.V. All rights reserved.

A local 2-approximation algorithm for the vertex cover problem

We present a distributed 2-approximation algorithm for the minimum vertex cover problem. The algorithm is deterministic, and it runs in (Δ + 1)2 synchronous communication rounds, where Δ is the maximum degree of the graph. For Δ = 3, we give a 2-approximation algorithm also for the weighted version of the problem.