980 resultados para Link prediction
Resumo:
A numerical approach has been developed for the correlation of retention limes (total retention lime) with temperature in gas chromatography, which allows the calculation of retention parameters including retention index from data acquired under two or more different temperature program conditions. By using this procedure the optimization of temperature condition can be further achieved, especially when a temperature-programmed run is the most suitable mode in the preliminary development of an analytical method for the analysis of an unknown sample.
Resumo:
The soil organic partition coefficient (K-oc) is one of the most important parameters to depict the transfer and fate of a chemical in the soil-water system. Predicting K-oc by using a chromatographic technique has been developing into a convenient and low-cost method. In this paper, a soil leaching column chromatograpy (SLCC) method employing the soil column packed with reference soil GSE 17201 (obtained from Bayer Landwirtschaftszentrum, Monheim, Germany) and methanol-water eluents was developed to predict the K-oc of hydrophobic organic chemicals (HOCs), over a log K-oc range of 4.8 orders of magnitude, from their capacity factors. The capacity factor with water as an eluent (k(w)') could be obtained by linearly extrapolating capacity factors in methanol-water eluents (k') with various volume fractions of methanol (phi). The important effects of solute activity coefficients in water on k(w)' and K-oc were illustrated. Hence, the correlation between log K-oc and log k(w)' (and log k') exists in the soil. The correlation coefficient (r) of the log K-oc vs. log k(w)' correlation for 58 apolar and polar compounds could reach 0.987, while the correlation coefficients of the log K-oc-log k' correlations were no less than 0.968, with phi ranging from 0 to 0.50. The smaller the phi, the higher the r. Therefore, it is recommended that the eluent of smaller phi, such as water, be used for accurately estimating K-oc. Correspondingly, the r value of the log K-oc-log k(w)' correlation on a reversed-phase Hypersil ODS (Thermo Hypersil, Kleinostheim, Germany) column was less than 0.940 for the same solutes. The SLCC method could provide a more reliable route to predict K-oc indirectly from a correlation with k(w)' than the reversed-phase liquid chromatographic (RPLC) one.
Resumo:
A model is developed for predicting the resolution of interested component pair and calculating the optimum temperature programming condition in the comprehensive two-dimensional gas chromatography (GC x GC). Based on at least three isothermal runs, retention times and the peak widths at half-height on both dimensions are predicted for any kind of linear temperature-programmed run on the first dimension and isothermal runs on the second dimension. The calculation of the optimum temperature programming condition is based on the prediction of the resolution of "difficult-to-separate components" in a given mixture. The resolution of all the neighboring peaks on the first dimension is obtained by the predicted retention time and peak width on the first dimension, the resolution on the second dimension is calculated only for the adjacent components with un-enough resolution on the first dimension and eluted within a same modulation period on the second dimension. The optimum temperature programming condition is acquired when the resolutions of all components of interest by GC x GC separation meet the analytical requirement and the analysis time is the shortest. The validity of the model has been proven by using it to predict and optimize GC x GC temperature programming condition of an alkylpyridine mixture. (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
This paper reprots on the use of banchmarking to improve the links between business and operations strategies. The use of benchmarking as a toll to facilitate improvements in these crucial links is examined. The existing literature on process benchmarking is used to from a structured questionnaire to apply to six case studies of major manuifacturing companies. Four of these case studies are presented in this paper to highlight the use of benchmarking in this application. Initial researh results are presented drawing upon the critical success factors indentified both in the literature and on the case results. Recommendations for further work are outlined
Resumo:
This paper reports on the use of benchmarking to improve the links between business and operations strategies. The use of benchmarking as a tool to facilitate improvement in these crucial links is examined. The existing literature on process benchmarking is used to form a structured questionnaire to apply to six case studies of major maunfacturing companies. Four of these case studies are presented drawing upon the critical success factors identified both in the literature and on the case results. Recommendations for further work are outlined.
Resumo:
This study sought predictors of mortality in patients aged >or=75 years with a first ST-segment elevation myocardial infarction (STEMI) and evaluated the validity of the GUSTO-I and TIMI risk models. Clinical variables, treatment and mortality data from 433 consecutive patients were collected. Univariable and multivariable logistic regression analyses were applied to identify baseline factors associated with 30-day mortality. Subsequently a model predicting 30-day mortality was created and compared with the performance of the GUSTO-I and TIMI models. After adjustment, a higher Killip class was the most important predictor (OR 16.1; 95% CI 5.7-45.6). Elevated heart rate, longer time delay to admission, hyperglycemia and older age were also associated with increased risk. Patients with hypercholesterolemia had a significantly lower risk (OR 0.46; 95% CI 0.24-0.86). Discrimination (c-statistic 0.79, 95% CI 0.75-0.84) and calibration (Hosmer-Lemeshow 6, p = 0.5) of our model were good. The GUSTO-I and TIMI risk scores produced adequate discrimination within our dataset (c-statistic 0.76, 95% CI 0.71-0.81, and c-statistic 0.77, 95% CI 0.72-0.82, respectively), but calibration was not satisfactory (HL 21.8, p = 0.005 for GUSTO-I, and HL 20.6, p = 0.008 for TIMI). In conclusion, short-term mortality in elderly patients with a first STEMI depends most importantly on initial clinical and hemodynamic status. The GUSTO-I and TIMI models are insufficiently adequate for providing an exact estimate of 30-day mortality risk.
Resumo:
X. Wang, J. Yang, R. Jensen and X. Liu, 'Rough Set Feature Selection and Rule Induction for Prediction of Malignancy Degree in Brain Glioma,' Computer Methods and Programs in Biomedicine, vol. 83, no. 2, pp. 147-156, 2006.
Resumo:
D.J. Currie, M.H. Lee and R.W. Todd, 'Prediction of Physical Properties of Yeast Cell Suspensions using Dielectric Spectroscopy', Conference on Electrical Insulation and Dielectric Phenomena, (CEIDP 2006), Annual Report, pp 672 ? 675, October 15th -18th 2006, Kansas City, Missouri, USA. Organised by IEEE Dielectrics and Electrical Insulation Society.
Resumo:
T.Boongoen and Q. Shen. Semi-Supervised OWA Aggregation for Link-Based Similarity Evaluation and Alias Detection. Proceedings of the 18th International Conference on Fuzzy Systems (FUZZ-IEEE'09), pp. 288-293, 2009. Sponsorship: EPSRC
Resumo:
Binding, David; Phillips, P.M.; Philips, T.N., (2006) 'Contraction/expansion flows: The pressure drop and related issues', Journal of Non-Newtonian Fluid Mechanics 137 pp.31-38 RAE2008
Resumo:
The application of inverse filtering techniques for high-quality singing voice analysis/synthesis is discussed. In the context of source-filter models, inverse filtering provides a noninvasive method to extract the voice source, and thus to study voice quality. Although this approach is widely used in speech synthesis, this is not the case in singing voice. Several studies have proved that inverse filtering techniques fail in the case of singing voice, the reasons being unclear. In order to shed light on this problem, we will consider here an additional feature of singing voice, not present in speech: the vibrato. Vibrato has been traditionally studied by sinusoidal modeling. As an alternative, we will introduce here a novel noninteractive source filter model that incorporates the mechanisms of vibrato generation. This model will also allow the comparison of the results produced by inverse filtering techniques and by sinusoidal modeling, as they apply to singing voice and not to speech. In this way, the limitations of these conventional techniques, described in previous literature, will be explained. Both synthetic signals and singer recordings are used to validate and compare the techniques presented in the paper.