Glycogen-accumulating organisms in laboratory-scale and full scale wastewater treatment processes

Laboratory-scale sequencing batch reactors (SBRs) as models for wastewater treatment processes were used to identify glycogen-accumulating organisms (GAOs), which are thought to be responsible for the deterioration of enhanced biological phosphorus removal (EBPR). The SBRs (called Q and T), operated under alternating anaerobic-aerobic conditions typical for EBPR, generated mixed microbial communities (sludges) demonstrating the GAO phenotype. Intracellular glycogen and poly-beta-hydroxyalkanoate (PHA) transformations typical of efficient EBPR occurred but polyphosphate was not bioaccumulated and the sludges contained 1.8% P (sludge Q) and 1.5% P (sludge T). 16S rDNA clone libraries were prepared from DNA extracted from the Q and T sludges. Clone inserts were grouped into operational taxonomic units (OTUs) by restriction fragment length polymorphism banding profiles. OTU representatives were sequenced and phylogenetically analysed. The Q sludge library comprised four OTUs and all six determined sequences were 99.7% identical, forming a cluster in the gamma-Proteobacteria radiation. The T sludge library comprised eight OTUs and the majority of clones were Acidobacteria subphylum 4 (49% of the library) and candidate phylum OPU (39% of the library). One OTU (two clones, of which one was sequenced) was in the gamma-Proteobacteria radiation with 95% sequence identity to the Q sludge clones. Oligonucleotide probes (called GAOQ431 and GAOQ989) were designed from the gamma-Proteobacteria clone sequences for use in fluorescence in situ hybridization (FISH); 92 % of the Q sludge bacteria and 28 % of the T sludge bacteria bound these probes in FISH. FISH and post-FISH chemical staining for PHA were used to determine that bacteria from a novel gamma-Proteobacteria cluster were phenotypically GAOs in one laboratory-scale SBR and two fullscale wastewater treatment plants. It is suggested that the GAOs from the novel cluster in the gamma-Proteobacteria radiation be named 'Candidatus Competibacter phosphatis'.

Factors influencing paternity success in Antechinus agilis: last-male sperm precedence, timing of mating and genetic compatibility

We describe the patterns of paternity success from laboratory mating experiments conducted in Antechinus agilis, a small size dimorphic carnivorous marsupial (males are larger than females). A previous study found last-male sperm precedence in this species, but they were unable to sample complete Utters, and did not take male size and relatedness into account. We tested whether last-male sperm precedence regardless of male size still holds for complete litters. We explored the relationship between male mating order, male size, timing of mating and relatedness on paternity success. Females were mated with two males of different size with either the large or the small male first, with 1 day rest between the matings. Matings continued for 6 h. in these controlled conditions male size did not have a strong effect on paternity success, but mating order did. Males mating second sired 69.5% of the offspring. Within first mated males, males that mated closer to ovulation sired more offspring, To a lesser degree, variation appeared also to be caused by differences in genetic compatibility of the female and the male, where high levels of allele-sharing resulted in lower paternity success.

Catheter effects in organ perfusion experiments

In a typical isolated organ perfusion experiment, a substance is injected upstream of an organ and then collected at some distance downstream. To reach the organ from the injection site, and then from the organ to the collector, a solute passes through catheters, usually tubes with circular cross-sections. Catheters cause distortion to the concentration-time profile of the perfusion. In this paper, we analyse catheter distribution kinetics from a mathematical point of view, develop the function most suitable for modeling this distribution and successfully apply this function to experimental data. (C) 2002 Academic Press.

Polyethylene flow prediction with a differential multi-mode Pom-Pom model

We report the first steps of a collaborative project between the University of Queensland, Polyflow, Michelin, SK Chemicals, and RMIT University; on simulation, validation and application of a recently introduced constitutive model designed to describe branched polymers. Whereas much progress has been made on predicting the complex flow behaviour of many - in particular linear - polymers, it sometimes appears difficult to predict simultaneously shear thinning and extensional strain hardening behaviour using traditional constitutive models. Recently a new viscoelastic model based on molecular topology, was proposed by McLeish and Larson (1998). We explore the predictive power of a differential multi-mode version of the pom-pom model for the flow behaviour of two commercial polymer melts: a (long-chain branched) low-density polyethylene (LDPE) and a (linear) high-density polyethylene (HDPE). The model responses are compared to elongational recovery experiments published by Langouche and Debbaut (1999), and start-up of simple shear flow, stress relaxation after simple and reverse step strain experiments carried out in our laboratory.

Slurry flow in mills: grate-only discharge mechanism (Part-1)

Discharge grates play an important role in determining the performance of autogenous, semi-autogenous and grate discharge ball mills. The flow capacity (grinding capacity) of these mills is strongly influenced by the discharge grate design-open area and position of apertures, as well as the performance of the pulp lifters. As mill sizes have progressively increased and closed-circuiting has become more popular the importance of grate and pulp lifter design has grown. Unfortunately very few studies have concentrated on this aspect of mill performance. To remedy this a series of laboratory and pilot-scale tests were undertaken to study both the performance of grates on their own and in conjunction with pulp lifters. In this first paper of a two-part series the results from the grate-only experiments are presented and discussed, whilst the performance of the grate-pulp-lifter system is covered in the second paper. The results from the grate-only experiments have shown that the build-up of slurry (hold-up) inside the mill starts from the shoulder of the charge, while the toe position of the slurry progressively moves towards the toe of the charge with increasing flowrate. Besides grate design (open area and position of apertures), charge volume and mill speed were also found to have a strong influence on mill hold-up and interact with grate design variables. (C) 2003 Elsevier Science Ltd. All rights reserved.

A foliar rating system for comparing the resistance of banana cultivars grown as tissue-cultured plantlets in the laboratory to Fusarium wilt

A foliar rating system was developed to assess the progress of Fusarium wilt ( Panama disease) caused by Fusarium oxysporum f. sp. cubense in seven banana cultivars differing in their resistance to race 1 of the pathogen. Plantlets were transplanted into unamended soil naturally infested with the pathogen, soil amended with urea and soil amended with aged chicken manure. A corm invasion score was also developed to assess the accuracy of the foliar symptom score as an indicator of cultivar resistance. On the basis of foliar symptom scores alone, the response of five of the seven cultivars in the chicken manure treatment corresponded to their known field response. However, the response of the other two cultivars, both susceptible to the pathogen in the field, fell into two categories. One had a high foliar symptom score and a correspondingly high corm invasion score, whereas the other had a low foliar symptom score and a high corm invasion score. Breeders need to be aware of the two categories of susceptible response, if inferior breeding material is to be rejected early on in a breeding program.

Reproducibility of a laboratory-based 40-km cycle time-trial on a stationary wind-trainer in highly trained cyclists

The purpose of the present study was to examine the reproducibility of laboratory-based 40-km cycle time-trial performance on a stationary wind-trainer. Each week, for three consecutive weeks, and on different days, forty-three highly trained male cyclists ((x) over bar +/- SD; age = 25 +/- 6 y; mass = 75 +/- 7 kg; peak oxygen uptake [(V) over dot O-2 peak] = 64.8 +/- 5.2 ml x kg(-1) x min(-1)) performed: 1) a (V) over dot O-2 peak test, and 2) a 40-km time-trial on their own racing bicycle mounted to a stationary wind-trainer (Cateye - Cyclosimulator). Data from all tests were compared using a one-way analysis of variance. Performance on the second and third 40-km time-trials were highly related (r = 0.96; p < 0.001), not significantly different (57:21 +/- 2:57 vs. 57:12 +/- 3:14 min:s), and displayed a low coefficient of variation (CV) = 0.9 +/- 0.7%. Although the first 40-km time-trial (58:43 +/- 3:17min:s) was not significantly different from the second and third tests (p = 0.06), inclusion of the first test in the assessment of reliability increased within-subject CV to 3.0 +/- 2.9%. 40-km time-trial speed (km x h(-1)) was significantly (p < 0.001) related to peak power output (W; r = 0.75), (V) over dot O-2 peak (1 x min(-1); r = 0.53), and the second ventilatory turnpoint (1 x min(-1); r = 0.68) measured during the progressive exercise tests. These data demonstrate that the assessment of 40-km cycle time-trial performance in well-trained endurance cyclists on a stationary wind-trainer is reproducible, provided the athletes perform a familiarization trial.

Water table waves in an unconfined aquifer: Experiments and modeling

[1] Comprehensive measurements are presented of the piezometric head in an unconfined aquifer during steady, simple harmonic oscillations driven by a hydrostatic clear water reservoir through a vertical interface. The results are analyzed and used to test existing hydrostatic and nonhydrostatic, small-amplitude theories along with capillary fringe effects. As expected, the amplitude of the water table wave decays exponentially. However, the decay rates and phase lags indicate the influence of both vertical flow and capillary effects. The capillary effects are reconciled with observations of water table oscillations in a sand column with the same sand. The effects of vertical flows and the corresponding nonhydrostatic pressure are reasonably well described by small-amplitude theory for water table waves in finite depth aquifers. That includes the oscillation amplitudes being greater at the bottom than at the top and the phase lead of the bottom compared with the top. The main problems with respect to interpreting the measurements through existing theory relate to the complicated boundary condition at the interface between the driving head reservoir and the aquifer. That is, the small-amplitude, finite depth expansion solution, which matches a hydrostatic boundary condition between the bottom and the mean driving head level, is unrealistic with respect to the pressure variation above this level. Hence it cannot describe the finer details of the multiple mode behavior close to the driving head boundary. The mean water table height initially increases with distance from the forcing boundary but then decreases again, and its asymptotic value is considerably smaller than that previously predicted for finite depth aquifers without capillary effects. Just as the mean water table over-height is smaller than predicted by capillarity-free shallow aquifer models, so is the amplitude of the second harmonic. In fact, there is no indication of extra second harmonics ( in addition to that contained in the driving head) being generated at the interface or in the interior.

Surface stickiness of drops of carbohydrate and organic acid solutions during convective drying: Experiments and modeling

Drying kinetics of low molecular weight sugars such as fructose, glucose, sucrose and organic acid such as citric acid and high molecular weight carbohydrate such as maltodextrin (DE 6) were determined experimentally using single drop drying experiments as well as predicted numerically by solving the mass and heat transfer equations. The predicted moisture and temperature histories agreed with the experimental ones within 6% average relative (absolute) error and average difference of +/- 1degreesC, respectively. The stickiness histories of these drops were determined experimentally and predicted numerically based on the glass transition temperature (T-g) of surface layer. The model predicted the experimental observations with good accuracy. A nonsticky regime for these materials during spray drying is proposed by simulating a drop, initially 120 mum in diameter, in a spray drying environment.

Optical experiments beyond the quantum limit: Squeezing entanglement and teleportation

Results of experiments recently performed are reported, in which two optical parametric amplifiers were set up to generate two independently quadrature squeezed continuous wave laser beams. The transformation of quadrature squeezed states into polarization squeezed states and into states with spatial quantum correlations is demonstrated. By utilizing two squeezed laser beams, a polarization squeezed state exhibiting three simultaneously squeezed Stokes operator variances was generated. Continuous variable polarization entanglement was generated and the Einstein-Podolsky-Rosen paradox was observed. A pair of Stokes operators satisfied both the inseparability criterion and the conditional variance criterion. Values of 0.49 and 0.77, respectively, were observed, with entanglement requiring values below unity. The inseparability measure of the observed quadrature entanglement was 0.44. This value is sufficient for a demonstration of quantum teleportation, which is the next experimental goal of the authors.

Potássio : fontes alternativas, tratamentos térmicos e disponibilidade para plantas de milho (Zea Mays L.)

Nosso país é um dos principais produtores agrícolas do mundo e altamente dependente da importação de fertilizantes, principalmente o potássio. Visando reduzir essa dependência, materiais provenientes de rochas para fornecimento desse elemento estão sendo testados. Este estudo foi divido em dois experimentos: um experimento em laboratório e um em casa de vegetação. O experimento em laboratório teve por objetivo avaliar os diferentes tipos de tratamentos térmicos e extratores, associados a fontes alternativas de potássio, no aumento da disponibilidade de K. O ensaio foi realizado num delineamento experimental inteiramente casualizado num esquema fatorial 4 x 5 x 3, com quatro repetições. Os fatores estudados foram: quatro fontes alternativas de potássio (verdete, fonolito, gnaisse e granito); cinco tratamentos térmicos (radiação em forno micro-ondas; autoclavagem; aquecimento em forno mufla com resfriamento rápido; aquecimento em forno mufla com resfriamento lento; e o material in natura); e três extratores: água, ácido cítrico 2 % e solução Mehlich-1. As extrações foram realizadas utilizando 4 g das fontes alternativas, adicionando-se 40 mL de cada extrator, as amostras foram agitadas, centrifugadas, filtradas e avolumadas. Foram realizadas seis extrações sucessivas e determinada a concentração de potássio nos extratos. Os dados obtidos foram submetidos à análise de variância, sendo seus efeitos desdobrados em contrastes ortogonais. O experimento em casa de vegetação teve por objetivo avaliar o efeito da utilização de fontes alternativas de potássio, submetidas a tratamentos térmicos, no fornecimento de potássio para plantas de milho (Zea mays L.). O delineamento experimental adotado foi em blocos casualizados, em um esquema fatorial (3 x 5) + 1, sendo três fontes alternativas de K (verdete, fonolito e granito), submetidas à cinco diferentes tratamentos (aquecimento em forno mufla com resfriamento lento, aquecimento em forno mufla com resfriamento rápido, radiação em forno micro-ondas, autoclavagem, e o material in natura). As fontes alternativas foram comparadas com o cloreto KCl. Amostras de solo contendo 2 dm³ de TFSA, foram incubadas durante 20 dias. Após a adubação, em cada vaso foram aplicadas as fontes alternativas de potássio. Realizou-se o plantio com cinco sementes de milho e posterior desbaste, deixando três plantas por vaso. Decorridos 40 dias da semeadura, foi realizado o corte da parte aérea das plantas, a coleta de amostras de solo para análise dos teores de potássio e separação das raízes. Os dados obtidos foram submetidos à análise de variância e desdobrados em contrastes ortogonais. Observando os resultados obtidos nos experimentos de laboratório e casa de vegetação, podemos concluir que a fonte alternativa e proporcionou melhores resultados e que possui potencial agronômico para ser utilizada como fonte alternativa de potássio foi o fonolito. Utilizando o fonolito como fonte alternativa de nutrientes, o tratamento térmico que proporcionou melhores resultados foi o com aquecimento em forno mufla, principalmente quando o resfriamento foi realizado lentamente.

Efeitos do isolamento social neonatal, da fluoxetina e do lactato desódio sobre o pânico experimental induzido por cianeto de potássio ou estimulação da matéria cinzenta periaquedutal em ratos

Os ataques de pânico (AP) podem ser precipitados pela inalação de dióxido de carbono (CO2 5%) ou pela infusão de lactato de sódio 0,5 mol/L (LAC) em pacientes predispostos, mas não nos indivíduos sadios ou pacientes com outros transtornos psiquiátricos. Estas e outras observações sugeriram que os AP sejam "alarmes falsos de sufocamento". O TP também caracteriza-se pela alta comorbidade com ansiedade de separação da infância (ASI). De fato, a ASI tem sido considerada como um fator predisponente tanto do pânico como da resistência aos panicolíticos. Estudos pré-clínicos do nosso laboratório mostraram, por outro lado, que a fluoxetina (FLX) atenua o pânico experimental à estimulação elétrica da matéria cinzenta periaquedutal dorsal (MCPAd) e à injeção de cianeto de potássio (KCN) em doses e regimes similares aos empregados na clínica. Adicionalmente, estes estudos mostraram que o isolamento social neonatal (ISN), um modelo de ASI, abole os efeitos panicolíticos da fluoxetina (1-2 mg.kg-1.dia-1, 21 dias) no modelo de pânico por estimulação da MCPAd. Portanto, o presente trabalho avaliou os efeitos da administração de 4 mg/kg de FLX (Estudo-1) e da infusão de uma solução 0,5 mol/L de LAC (Estudo-2) sobre as respostas de pânico à estimulação da MCPAd ou à injeção de KCN, respectivamente, em ratos submetidos ao isolamento social neonatal tanto efetivo (ISN) quanto fictício (ISF). No Estudo-1, ratos Wistar machos adultos submetidos ao ISN (3 h diárias) ou ao ISF (somente manipulação), ao longo da lactação, foram implantados com eletrodos na MCPAd e tratados com salina (0,9%, SAL) ou FLX (4 mg.kg-1.dia-1) ao longo de 21 dias. Nos ratos tratados com SAL, enquanto os limiares das respostas de pânico mantiveram-se praticamente inalterados no grupo ISF, eles foram progressivamente aumentados no grupo ISN. Os ratos tratados com FLX4 apresentaram limiares mais elevados que aqueles dos ratos tratados com SAL. A comparação aos limiares basais mostrou que a FLX4 teve efeitos diferenciados nos grupos ISF e ISN, aumentando ou reduzindo seus limiares, respectivamente. Embora não tenhamos observado diferenças dos efeitos da FLX4 sobre os limiares de pânico dos grupos ISN e ISF, as variações percentuais em relação à sessão de triagem indicam que a FLX4 teve efeitos até mesmo facilitadores. Estes resultados estendem observações anteriores da ausência de efeitos de doses menores de FLX nos ratos submetidos ao ISN. Por sua vez, o Estudo-2 mostrou que a infusão endovenosa de uma concentração clinicamente eficaz de LAC (0,5 mol/L) não tem efeito algum sobre o pânico induzido pelo KCN em ratos tanto virgens quanto submetidos ao ISF ou ISN. Embora os últimos resultados sugiram que os AP ao KCN (em ratos) e LAC (em humanos) envolvam mecanismos distintos, a conclusão definitiva requer experimentos adicionais com concentrações maiores de LAC.

Automation & control remote laboratory: evaluating a cooperative methodology

This paper presents a study carried out in order to evaluate the students' perception in the development and use of remote Control and Automation education kits developed by two Universities. Three projects, based on real world environments, were implemented, being local and remotely operated. Students implemented the kits using the theoretical and practical knowledge, being the teachers a catalyst in the learning process. When kits were operational, end-user students got acquainted to the kits in the course curricula units. It is the author's believe that successful results were achieved not only in the learning progress on the Automation and Control fields (hard skills) but also on the development of the students soft skills, leading to encouraging and rewarding goals, motivating their future decisions and promoting synergies in their work. The design of learning experimental kits by students, under teacher supervision, for future use in course curricula by enduser students is an advantageous and rewarding experience.

Supercritical CO2 extraction of secondary metabolites from Agaricus blazei: experiments and modelling

The mycelium and young fruiting bodies of Agaricus blazei were submitted to supercritical CO2 extraction, in a modified commercial flow apparatus, at temperatures from 40 to 80 ºC, pressures up to 600 bar and CO2 flow-rates from 2.0 to 9.0 g.min-1. The best extraction conditions of secondary metabolites, whereby the degree of solubilization (g extract/100 g of fungi) is the highest, was obtained with pure CO2 at 400 bar, 70 ºC and a CO2 flow rate of 5.7g.min-1. The extract in that conditions were analysed by GC-Ms. In order to increase the extraction yield of secondary metabolites, which are mostly present in glycolipid fractions, a polar compound (ethanol) was used as co-solvent in the proportions of 5 and 10 % (mol/mol). The presence of ethanol increased the yield when compared with the extraction with pure CO2. Moreover, a simple model was applied to the supercritical CO2 extraction of secondary metabolites from Agaricus blazei.