943 resultados para Joint stock companies
Resumo:
The thermal stress in a Sn3.5Ag1Cu half-bump solder joint under a 3.82×108 A/m2 current stressing was analyzed using a coupled-field simulation. Substantial thermal stress accumulated around the Al-to-solder interface, especially in the Ni+(Ni,Cu)3Sn4 layer, where a maximal stress of 138 MPa was identified. The stress gradient in the Ni layer was about 1.67×1013 Pa/m, resulting in a stress migration force of 1.82×10-16 N, which is comparable to the electromigration force, 2.82×10-16 N. Dissolution of the Ni+(Ni,Cu)3Sn4 layer, void formation with cracks at the anode side, and extrusions at the cathode side were observed
Resumo:
High current density induced damages such as electromigration in the on-chip interconnection /metallization of Al or Cu has been the subject of intense study over the last 40 years. Recently, because of the increasing trend of miniaturization of the electronic packaging that encloses the chip, electromigration as well as other high current density induced damages are becoming a growing concern for off-chip interconnection where low melting point solder joints are commonly used. Before long, a huge number of publications have been explored on the electromigration issue of solder joints. However, a wide spectrum of findings might confuse electronic companies/designers. Thus, a review of the high current induced damages in solder joints is timely right this moment. We have selected 6 major phenomena to review in this paper. They are (i) electromigration (mass transfer due electron bombardment), (ii) thermomigration (mass transfer due to thermal gradient), (iii) enhanced intermetallic compound growth, (iv) enhanced current crowding, (v) enhanced under bump metallisation dissolution and (vi) high Joule heating and (vii) solder melting. the damage mechanisms under high current stressing in the tiny solder joint, mentioned in the review article, are significant roadblocks to further miniaturization of electronics. Without through understanding of these failure mechanisms by experiments coupled with mathematical modeling work, further miniaturization in electronics will be jeopardized
Resumo:
The trend towards miniaturization of electronic products leads to the need for very small sized solder joints. Therefore, there is a higher reliability risk that too large a fraction of solder joints will transform into Intermetallic Compounds (IMCs) at the solder interface. In this paper, fracture mechanics study of the IMC layer for SnPb and Pb-free solder joints was carried out using finite element numerical computer modelling method. It is assumed that only one crack is present in the IMC layer. Linear Elastic Fracture Mechanics (LEFM) approach is used for parametric study of the Stress Intensity Factors (SIF, KI and KII), at the predefined crack in the IMC layer of solder butt joint tensile sample. Contrary to intuition, it is revealed that a thicker IMC layer in fact increases the reliability of solder joint for a cracked IMC. Value of KI and KII are found to decrease with the location of the crack further away from the solder interfaces while other parameters are constant. Solder thickness and strain rate were also found to have a significant influence on the SIF values. It has been found that soft solder matrix generates non-uniform plastic deformation across the solder-IMC interface near the crack tip that is responsible to obtain higher KI and KII.
Resumo:
This account provides an overview of the study day, entitled 'Topics in the History of Financial Mathematics: Early commerce to chaos in modern stock markets,' held by the British Society for the History of Mathematics jointly with Gresham College, at Gresham College, London on 25th April 2008. The series of talks explored the development of mathematics and mathematical techniques in a commercial and financial context.
Resumo:
Explores the issue of the share of beneficial entitlement to the family home where the legal title is jointly owned, but where there has not been an express declaration of a beneficial joint tenancy. Discusses the House of Lords judgment in Stack v Dowden which addressed this point. Explains how the judges moved the focus away from the court imposing its own sense of fairness on the parties or imputing an intention based on the circumstances to one where the concentration will be on the parties' relevant conduct. Outlines three other points of interest referred to in the judgment: (1) whether an indirect financial contribution could support a constructive trust; (2) whether proprietary estoppel and common intention constructive trusts should be assimilated; and (3) whether a mortgage liability is equivalent to a financial contribution.
Resumo:
Reviews case law illustrating the courts' approach to beneficial ownership of property purchased in joint name by means of a joint mortgage but without any declaration of beneficial interest, the resulting trust and joint beneficial interest presumptions. Contrast the approach adopted in cases where one party made no contribution to the mortgage payments with those where both parties made a contribution. Highlights the courts' treatment of the right to buy discount afforded tenant purchasers and property purchased as a commercial venture rather than a home.
Resumo:
Purpose – The purpose of this paper is to examine the effect of the psychological bond on behavioral loyalty (word-of-mouth, continuance and non-audit services) to audit firms providing services to companies listed on the Polish Stock Exchange. Design/methodology/approach – A model is proposed and tested using structural equation modeling with LISREL. Data were collected from top executives of companies listed on the Warsaw Stock Exchange. Findings – The psychological bond has a positive effect on word-of-mouth, continuance and non-audit services. Research limitations/implications – The current research is limited to the investigation of the psychological bond as an antecedent of behavioral loyalty in Poland. Future research should identify and assess other antecedents and replicate these across different countries. A longitudinal survey across different points in time might reveal more useful information about auditor-client relationships. Practical implications – Auditors need to consider ways in which they can develop the psychological bond with their clients. This bond is the basis for the client believing the audit firm is superior to others, which has been found to lead to behavioral loyalty in this study. In particular, management of the auditor brand and reputation, personal experience of the audit firm and alumni relations are discussed as ways of enhancing the psychological bond among client executives. Originality/value – This study is the first to examine the impact of the psychological bond on behavioral loyalty in auditor-client relationships.
Resumo:
A review of the impact of international institutions and multinational companies on municipal services worldwide, and of campaigns for alternatives.
Resumo:
The presentation explores and evaluates an innovation in education and training in which two different professional trainings (nursing and social work) are integrated to produce jointly qualified specialist practitioners.
Resumo:
This paper illustrates the key service issues within two UK manufacturing companies,which belong to two different industrial domains, and highlights the main points of difference. It draws also on the literature of Product-Service Systems regarding their definition, types, benefits and difficulties in their implementation
Resumo:
The paper explores differences as well as commonalities in corporate risk management practices and risk exposures in the large non-financial Slovenian and Croatian companies. Comparative analysis of survey results have revealed that the majority of analysed companies in both Croatia and Slovenia are using some form of risk management to manage interest-rate, foreign exchange, or commodity price risk. Regarding the intensity of influence of financial risks on the performance of the analysed companies, the results have shown that the price risk has the highest influence among the Slovenian as well as the Croatian companies. Croatian companies are more affected by currency risk than the Slovenian companies, while the interest-rate risk has been ranged as less important in comparison with commodity price and currency risks. The survey’s results have clearly indicated that Croatian and Slovenian non-financial companies manage financial risks primarily with simple risk management instruments such as natural hedging. In the case of derivatives use, forwards and swaps are by far the most important instruments in both countries, but futures as representatives of standardised derivatives and structured derivatives are more important in the Slovenian than in the Croatian companies.
Resumo:
This paper examines the ownership, employment and finances of the major waste companies in Europe, and recent developments in ownership.
Resumo:
The primary production in the Bristol Channel, U.K., was studied from 1973 to 1977: in this estuary, the euphotic zone extends from less than 0.5 m to greater than 10m and there is a large riverine input of inorganic nutrients. The standing stock of phytoplankton chlorophyll a was measured in 1973 and 1974 and was similar throughout the Bristol Channel but the rate of primary production was much greater where the water was less turbid. The estimated primary production was 6.8g C m−2 for the most turbid region and 164.9g C m−2 for the Outer Bristol Channel. A larger proportion of the annual primary production occurred in the spring in the Outer Channel than in the most turbid regions. Phaeocystis developed into blooms in some, but not all, years and exhibited a different light saturation curve to other phytoplankton populations. Serial incubations of short duration gave higher fixation rates than day-long incubations and it is argued that photoinhibition is probably insignificant in a mixed water column. Excretion rates of dissolved organic carbon by phytoplankton were always low.
Resumo:
High-latitude seas are mostly covered by multi-year ice, which impacts processes of primary production and sedimentation of organic matter. Because of the warming effect of West Spitsbergen Current (WSC), the waters off West Spitsbergen have only winter ice cover. That is uncommon for such a high latitude and enables to separate effects of multiyear-ice cover from the latitudinal patterns. Macrofauna was sampled off Kongsfjord (79°N) along the depth gradient from 300 to 3000 m. The density, biomass and diversity at shallow sites situated in a canyon were very variable. Biomass was negatively correlated with depth (R=-0.86R=-0.86, p<0.001), and ranged from 61 g ww m−2 (212 m) to 1 g ww m−2 (2025 m). The biomasses were much higher than in the multiyear-ice covered High Arctic at similar depths, while resembling those from temperate and tropical localities. Species richness (expressed by number of species per sample and species–area accumulation curves) decreased with depth. There was no clear depth-related pattern in diversity measures: Hurbert rarefaction, Shannon–Wiener or Pielou. The classic increase of species richness and diversity with depth was not observed. Species richness and diversity of deep-sea macrofauna were much lower in our study than in comparable studies of temperate North Atlantic localities. That is related to geographic isolation of Greenland–Icelandic–Norwegian (GIN) seas from the Atlantic pool of species.