Effects of immobilization and remobilization on the ankle joint in Wistar rats

A sprained ankle is a common musculoskeletal sports injury and it is often treated by immobilization of the joint. Despite the beneficial effects of this therapeutic measure, the high prevalence of residual symptoms affects the quality of life, and remobilization of the joint can reverse this situation. The aim of this study was to analyze the effects of immobilization and remobilization on the ankle joint of Wistar rats. Eighteen male rats had their right hindlimb immobilized for 15 days, and were divided into the following groups: G1, immobilized; G2, remobilized freely for 14 days; and G3, remobilized by swimming and jumping in water for 14 days, performed on alternate days, with progression of time and a series of exercises. The contralateral limb was the control. After the experimental period, the ankle joints were processed for microscopic analysis. Histomorphometry did not show any significant differences between the control and immobilized/remobilized groups and members, in terms of number of chondrocytes and thickness of the articular cartilage of the tibia and talus. Morphological analysis of animals from G1 showed significant degenerative lesions in the talus, such as exposure of the subchondral bone, flocculation, and cracks between the anterior and mid-regions of the articular cartilage and the synovial membrane. Remobilization by therapeutic exercise in water led to recovery in the articular cartilage and synovial membrane of the ankle joint when compared with free remobilization, and it was shown to be an effective therapeutic measure in the recovery of the ankle joint.

A Web-Based Environmental Toolkit to Support Small and Medium-Sized Enterprises in the Implementation of Their Own Environmental Management System

With small and medium sized-enterprises (SMEs) taking up the majority of the global businesses, it is important they act in an environmentally responsible manner. Environmental management systems (EMS) help companies evaluate and improve their environmental impact but they often require human, financial, and temporary resources that not all SMEs can provide. This research encompasses interviews with representatives of two small enterprises in Germany to provide insights into their understanding, and knowledge of an EMS and how they perceive their responsibility towards the environment. Furthermore, it presents a toolkit created especially for small and medium-sized enterprises that serves as a simplified version of an EMS based on the ISO 14001 standard and is evaluated by the representatives of the SMEs. Some of the findings are: while being open to the idea of improving their environmental impact, SMEs do not always feel it is their responsibility to do so; they seem to lack the means to fully implement an EMS. The developed toolkit is considered useful and usable and recommendations are drawn for its future enhancement.

Requisites for a successful implementation of an automated inventory replenishment system

Tutkimuksen tavoitteena oli selvittää automaattisten tilausjärjestelmien onnistuneen käyttöönottoon taustalla vaikuttavia tekijöitä vähittäiskaupan toimialalla ja etsiä ratkaisua kyseisten järjestelmien onnistuneeseen käyttöönottoon tässä ympäristössä. Tutkimus analysoi yli sadan kaupan järjestelmän käyttöönottoa ja käyttöönoton tuloksia. Tutkimusta varten haastateltiin niin yhtiön sisältä kuin ulkopuoleltakin mukana olleita hankintajärjestelmän ja jalkautuksen asiantuntijoita. Tämän lisäksi järjestelmän käyttöönottaneisiin kauppoihin lähetettiin kyselyt, joita analysoitiin ryhmissä automaattisen tilausjärjestelmän tietojen pohjalta. Työn tuloksena pystyttiin tunnistamaan tietty joukko taustatekijöitä, jotka tulee ottaa käyttöönotossa huomioon sekä saatuihin tutkimustuloksiin perustuen kehitettiin malli vastaavanlaisten järjestelmien käyttöönotolle vähittäiskaupan alalle.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

The best practices in the formation phase of Sino-Finnish joint ventures in China: For Finnish software companies

This study discusses the formation phase of Chinese-Finnish joint ventures in China. The purpose of this thesis is to create best practices for Finnish software companies in forming a joint venture with a local Chinese company in China. Therefore, the main research question, in what are the best practices for forming Sino-Finnish joint ventures in China for Finnish software firms, is examined through four different themes within the joint venture formation phase; the motives, the partner se- lection, the choice of a joint venture type and joint venture negotiations. The theoretical background of the study consists of literature relating to the establishment process of Sino-Western joint ventures in China. The empirical research conducted for this study is based on the expert interviews. The empirical data was gathered via nine semi-structured interviews with both Chinese and Finnish experts in software and technology industry, who have experience or knowledge in establishing Sino-Finnish joint ventures in China. Thematic analysis was used to cat- egorize and interpret the interview data. In addition, a thematic network was built to act as a basis of the analysis. According to the main findings, the main motives for Finnish software companies to establish a joint venture in China are lack of skills or experience, little resources to enter on their own, and China’s large market. The main motives for Chinese companies are to gain new technology or man- agerial skills, and expand internationally. The intellectual property rights (IPR) have recently im- proved a lot in China, but the Finnish companies’ knowledge on IPR is inadequate. The Finnish software companies should conduct a market and industry research in order to understand their po- sition in the market and to find a suitable location and potential joint venture partners. It is essential to define partner selection criteria and partner attributes. In addition, it is important to build the joint venture around complementary motives and a win-win situation between the joint venture partners. The Finnish companies should be prepared that the joint venture negotiations will be challenging and they will take a long time. The challenges can be overcome by gaining understanding about the Chinese culture and business environment. The findings of this study enhance understanding of the joint venture formation phase in China. This study provides guidelines for Finnish software companies to establish a joint venture in China. In addition, this study brings new insights to the Sino-Western joint venture literature with its soft- ware industry context. Future research is, however, necessary in order to gain an understanding of the advantages and disadvantages of a joint venture as an entry mode into China for Finnish soft- ware companies

Effect of the implementation of the Hazard Analysis Critical Control Point (HACCP) prerequisite program in an institutional foodservice unit in Southern Brazil

The aims of this study were to investigate the hygienic practices in the food production of an institutional foodservice unit in Southern Brazil and to evaluate the effect of implementing good food handling practices and standard operational procedures using microbiological hygiene indicators. An initial survey of the general operating conditions classified the unit as regular in terms of compliance with State safety guidelines for food service establishments. An action plan that incorporated the correction of noncompliance issues and the training of food handlers in good food handling practices and standard operational procedures were then implemented. The results of the microbiological analysis of utensils, preparation surfaces, food handlers' hands, water, and ambient air were recorded before and after the implementation of the action plan. The results showed that the implementation of this type of practice leads to the production of safer foods.