Origin of cold gas and dust in massive elliptical galaxies

The recent availability of multi-wavelength data revealed the presence of large reservoirs of warm and cold gas and dust in the innermost regions of the majority of massive elliptical galaxies. To prove an internal origin of cold and warm gas, the investigation of the spatially distributed cooling process which occurs because of non-linear density perturbations and subsequent thermal instabilities is of crucial importance. The first goal of this work of thesis is to investigate the internal origin of warm and cold phases. Numerical simulations are the powerful tool of analysis. The way in which a spatially distributed cooling process originates has been examined and the off-centre amount of gas mass which cools when different and differently characterized AGN feedback mechanisms operate has been quantified. This thesis demonstrates that the aforementioned non-linear density perturbations originate and develop from AGN feedback mechanisms in a natural fashion. An internal origin of the warm phase from the once hot gas is shown to be possible. Computed velocity dispersions of ionized and hot gas are similar. The cold gas as well can originate from the cooling process: indeed, it has been estimated that the surrounding stellar radiation, which is one of the most feasible sources of ionization of the warm gas, does not manage to keep ionized all the gas at 10^4 K. Therefore, cooled gas does undergo a further cooling which can lead the warm phase to lower temperatures. However, the gas which has cooled from the hot phase is expected to be dustless; nonetheless, a large fraction of early type galaxies has detectable dust in their cores, both concentrated in filamentary and disky structures and spread over larger regions. Therefore a regularly rotating disk of cold and dusty gas has been included in the simulations. A new quantitative investigation of the spatially distributed cooling process has therefore been essential: the contribution of the included amount of dust which is embedded in the cold gas does have a role in promoting and enhancing the cooling. The fate of dust which was at first embedded in cold gas has been investigated. The role of AGN feedback mechanisms in dragging (if able) cold and dusty gas from the core of massive ellipticals up to large radii has been studied.

Total synthesis of (-)-zampanolide and structure-activity relationship studies on (-)-dactylolide derivatives

A new total synthesis of the marine macrolide (-)-zampanolide (1) and the structurally and stereochemically related non-natural levorotatory enantiomer of (+)-dactylolide (2), that is, ent-2, has been developed. The synthesis features a high-yielding, selective intramolecular Horner-Wadsworth-Emmons (HWE) reaction to close the 20-membered macrolactone ring of 1 and ent-2. The β-keto phosphonate/aldehyde precursor for the ring-closure reaction was obtained by esterification of a ω-diethylphosphono carboxylic acid fragment and a secondary alcohol fragment incorporating the THP ring that is embedded in the macrocyclic core structure of 1 and ent-2. THP ring formation was accomplished through a segment coupling Prins-type cyclization. Employing the same overall strategy, 13-desmethylene-ent-2 as well as the monocyclic desTHP derivatives of 1 and ent-2 were prepared. Synthetic 1 inhibited human cancer cell growth in vitro with nM IC(50) values, while ent-2, which lacks the diene-containing hemiaminal-linked side chain of 1, is 25- to 260-fold less active. 13-Desmethylene-ent-2 as well as the reduced versions of ent-2 and 13-desmethylene-ent-2 all showed similar cellular activity as ent-2 itself. The same activity level was attained by the monocyclic desTHP derivative of 1. Oxidation of the aldehyde functionality of ent-2 gave a carboxylic acid that was converted into the corresponding N-hexyl amide. The latter showed only μM antiproliferative activity, thus being several hundred-fold less potent than 1.

Robustness of speckle imaging techniques applied to horizontal imaging scenarios

Atmospheric turbulence near the ground severely limits the quality of imagery acquired over long horizontal paths. In defense, surveillance, and border security applications, there is interest in deploying man-portable, embedded systems incorporating image reconstruction methods to compensate turbulence effects. While many image reconstruction methods have been proposed, their suitability for use in man-portable embedded systems is uncertain. To be effective, these systems must operate over significant variations in turbulence conditions while subject to other variations due to operation by novice users. Systems that meet these requirements and are otherwise designed to be immune to the factors that cause variation in performance are considered robust. In addition robustness in design, the portable nature of these systems implies a preference for systems with a minimum level of computational complexity. Speckle imaging methods have recently been proposed as being well suited for use in man-portable horizontal imagers. In this work, the robustness of speckle imaging methods is established by identifying a subset of design parameters that provide immunity to the expected variations in operating conditions while minimizing the computation time necessary for image recovery. Design parameters are selected by parametric evaluation of system performance as factors external to the system are varied. The precise control necessary for such an evaluation is made possible using image sets of turbulence degraded imagery developed using a novel technique for simulating anisoplanatic image formation over long horizontal paths. System performance is statistically evaluated over multiple reconstruction using the Mean Squared Error (MSE) to evaluate reconstruction quality. In addition to more general design parameters, the relative performance the bispectrum and the Knox-Thompson phase recovery methods is also compared. As an outcome of this work it can be concluded that speckle-imaging techniques are robust to the variation in turbulence conditions and user controlled parameters expected when operating during the day over long horizontal paths. Speckle imaging systems that incorporate 15 or more image frames and 4 estimates of the object phase per reconstruction provide up to 45% reduction in MSE and 68% reduction in the deviation. In addition, Knox-Thompson phase recover method is shown to produce images in half the time required by the bispectrum. The quality of images reconstructed using Knox-Thompson and bispectrum methods are also found to be nearly identical. Finally, it is shown that certain blind image quality metrics can be used in place of the MSE to evaluate quality in field scenarios. Using blind metrics rather depending on user estimates allows for reconstruction quality that differs from the minimum MSE by as little as 1%, significantly reducing the deviation in performance due to user action.

DESIGN AND IMPLEMENTATION OF HOME USE PORTABLE SMART ELECTRONICS

The widespread of low cost embedded electronics makes it easier to implement the smart devices that can understand either the environment or the user behaviors. The main object of this project is to design and implement home use portable smart electronics, including the portable monitoring device for home and office security and the portable 3D mouse for convenient use. Both devices in this project use the MPU6050 which contains a 3 axis accelerometer and a 3 axis gyroscope to sense the inertial motion of the door or the human hands movement. For the portable monitoring device for home and office security, MPU6050 is used to sense the door (either home front door or cabinet door) movement through the gyroscope, and Raspberry Pi is then used to process the data it receives from MPU6050, if the data value exceeds the preset threshold, Raspberry Pi would control the USB Webcam to take a picture and then send out an alert email with the picture to the user. The advantage of this device is that it is a small size portable stand-alone device with its own power source, it is easy to implement, really cheap for residential use, and energy efficient with instantaneous alert. For the 3D mouse, the MPU6050 would use both the accelerometer and gyroscope to sense user hands movement, the data are processed by MSP430G2553 through a digital smooth filter and a complementary filter, and then the filtered data will pass to the personal computer through the serial COM port. By applying the cursor movement equation in the PC driver, this device can work great as a mouse with acceptable accuracy. Compared to the normal optical mouse we are using, this mouse does not need any working surface, with the use of the smooth and complementary filter, it has certain accuracy for normal use, and it is easy to be extended to a portable mouse as small as a finger ring.

Enforcement of the GNU GPL in Germany and Europe

GPL enforcement is successful in Europe. In several court decisions and out of court settlements the license conditions of the GPL have been successfully enforced. In particular, embedded systems are the main focus of such compliance activities. The article describes the practice of enforcement activities and the legal prerequisites under the application of German law.

Indocyanine Green Loaded Biocompatible Nanoparticles: Stabilisation of Indocyanine Green (ICG) Using Biocompatible Silica-Poly (&epsilon-Caprolactone) Grafted Nanocomposites

Indocyanine green (ICG) is a chemically labile compound which needs to be stabilized in aqueous media to be used in biomedical applications. In the present study, poly(ε-caprolactone) (PCL), a semi-crystalline polyester, was used to encapsulate and stabilize ICG in a hydrophobic environment. A hydrophobic and biocompatible nanocomposite was obtained by the process of encapsulating inorganic silica. ICG was embedded in the hydrophobic polymer coating by starting from a well-defined silica (Si) core of either 80 nm or 120 nm diameter, which served as a template for a ‘grafting from’ approach using ε-caprolactone. The obtained nanocomposite Si grafted PCL/ICG was based on silica nanoparticles grafted with PCL, in which ICG was adsorbed. The nanoparticles were characterized by IR spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The change in the surface charge and the colloidal stability of the nanoparticles was followed by zeta potential measurements. This approach of synthesizing nanocomposite-based ICG demonstrates a new route to stabilize ICG. We synthesized biocompatible nanoparticles containing a high ICG concentration and exhibiting excellent stability to aqueous decomposition.

Changes in situational and dispositional factors as predictors of job satisfaction

Arguably, job satisfaction is one of the most important variables with regard to work. When explaining job satisfaction, research usually focuses on predictor variables in terms of levels but neglects growth rates. Therefore it remains unclear how potential predictors evolve over time and how their development affects job satisfaction. Using multivariate latent growth modeling in a study with 1145 young workers over five years, we analyzed how well job satisfaction is predicted a) by levels of situational (i.e., job control) and dispositional (i.e., Core Self-Evaluations (CSE)) factors and b) by growth per year of these predictors. Results showed both intercepts and slopes to be related to each other, suggesting a joint growth of job control and CSE during early careers. Job satisfaction after five years was best predicted by the slopes of job control (β = .31, p < .001) and CSE (β = .34, p < .01). These findings provide further longitudinal evidence for the role of situational as well as dispositional factors for predicting job satisfaction. In addition, growth rates per year were better predictors than initial levels. Furthermore, a lack of change in job control or CSE went along with a drop in job satisfaction, implying that young workers need to perceive things to be improving in order to increase, or at least maintain, their level of job satisfaction. In terms of theory, the relative importance of levels versus changes deserves more attention. In terms of practical implications, our results suggest a double emphasis on job design (i.e., granting sufficient, and increasing, control) and on personal development (e.g., through training) so that people experience a match between both. Finally, negative associations between initial levels and growth rates suggest that people are quite successful in achieving a reasonable fit between their job characteristics and their needs and goals.

Norm and Anomaly in the Jewish Life of Jesus (Toledot Yeshu)

The Toledoth Yeshu, the “Generation,” or “Life of Jesus,” have been described as an anti-Gospel, or a parody of the Gospel. This protean tradition, witnessed in more than hundred manuscripts and printed editions, offers a “counter-history” of the life of Jesus and the origins of Christianity. According to this mischievous narrative Jesus was an illegitimate child turned charlatan, and his disciples a bunch of violent and senseless rogues who continued to stir up trouble in Israel even following their leader’s shameful hanging. The Toledoth Yeshu is the story of an anomaly (Jesus and the birth of Christianity). It is also a story about confusion: marital confusion, social confusion, and religious confusion. As an exercise in “historical imagination,” the Toledoth Yeshu offers a narrative of religions compared, and a reflection on social and religious borders, on their instability and fragility, and ultimately on their necessity. The present paper will explore the normative dimension of the Toledoth Yeshu tradition: the way the “disorder of things” the narrative relates also conveys a powerful discourse on social and religious norms. We will also seek to map this tradition in the broader context of medieval Jewish discussions on Jesus (particularly Maimonides) as a “case” in the religious history of mankind, addressing issues of false prophecy, religious deviation, transgression, and heresy.

A novel organ-slice culturing system to simulate meniscal repair: Proof of concept using a synovium-based pool of meniscoprogenitor cells.

Meniscal injuries can occur secondary to trauma or be instigated by the changes in knee-joint function that are associated with aging, osteo- and rheumatoid arthritis, disturbances in gait and obesity. Sixty per cent of persons over 50 years of age manifest signs of meniscal pathology. The surgical and arthroscopic measures that are currently implemented to treat meniscal deficiencies bring only transient relief from pain and effect but a temporary improvement in joint function. Although tissue-engineering-based approaches to meniscal repair are now being pursued, an appropriate in-vitro model has not been conceived. The aim of this study was to develop an organ-slice culturing system to simulate the repair of human meniscal lesions in vitro. The model consists of a ring of bovine meniscus enclosing a chamber that represents the defect and reproduces its sequestered physiological microenvironment. The defect, which is closed with a porous membrane, is filled with fragments of synovial tissue, as a source of meniscoprogenitor cells, and a fibrin-embedded, calcium-phosphate-entrapped depot of the meniscogenic agents BMP-2 and TGF-ß1. After culturing for 2 to 6 weeks, the constructs were evaluated histochemically and histomorphometrically, as well as immunohistochemically for the apoptotic marker caspase 3 and collagen types I and II. Under the defined conditions, the fragments of synovium underwent differentiation into meniscal tissue, which bonded with the parent meniscal wall. Both the parent and the neoformed meniscal tissue survived the duration of the culturing period without significant cell losses. The concept on which the in-vitro system is based was thus validated. This article is protected by copyright. All rights reserved.

The Application of Digital Rights Management Systems in the Music Industry - An Empirical Investigation

Technology advances in hardware, software and IP-networks such as the Internet or peer-to-peer file sharing systems are threatening the music business. The result has been an increasing amount of illegal copies available on-line as well as off-line. With the emergence of digital rights management systems (DRMS), the music industry seems to have found the appropriate tool to simultaneously fight piracy and to monetize their assets. Although these systems are very powerful and include multiple technologies to prevent piracy, it is as of yet unknown to what extent such systems are currently being used by content providers. We provide empirical analyses, results, and conclusions related to digital rights management systems and the protection of digital content in the music industry. It shows that most content providers are protecting their digital content through a variety of technologies such as passwords or encryption. However, each protection technology has its own specific goal, and not all prevent piracy. The majority of the respondents are satisfied with their current protection but want to reinforce it for the future, due to fear of increasing piracy. Surprisingly, although encryption is seen as the core DRM technology, only few companies are currently using it. Finally, half of the respondents do not believe in the success of DRMS and their ability to reduce piracy.

Gene clustering of the small leucine -rich repeat gene family

The small leucine-rich repeat proteoglycans (or SLRPs) are a group of extracellular proteins (ECM) that belong to the leucine-rich repeat (LRR) superfamily of proteins. The LRR is a protein folding motif composed of 20–30 amino acids with leucines in conserved positions. LRR-containing proteins are present in a broad spectrum of organisms and possess diverse cellular functions and localization. In mammals, the SLRPs are abundant in connective tissues, such as bones, cartilage, tendons, skin, and blood vessels. We have discovered a new member of the class I small leucine rich repeat proteoglycan (SLRP) family which is distinct from the other class I SLRPs since it possesses a unique stretch of aspartate residues at its N-terminus. For this reason, we called the molecule asporin. The deduced amino acid sequence is about 50% identical (and 70% similar) to decorin and biglycan. However, asporin does not contain a serine/glycine dipeptide sequence required for the assembly of O-linked glycosaminoglycans and is probably not a proteoglycan. The tissue expression of asporin partially overlaps with the expression of decorin and biglycan. During mouse embryonic development, asporin mRNA expression was detected primarily in the skeleton and other specialized connective tissues; very little asporin message was detected in the major parenchymal organs. The mouse asporin gene structure is similar to that of biglycan and decorin with 8 exons. The asporin gene is localized to human chromosome 9q22-9g21.3 where asporin is part of a SLRP gene cluster that includes ECM2, osteoadherin, and osteoglycin. This gene cluster of four LRR-encoding genes is embedded in a 238 kilobase intron of another novel gene named Tes9orf that is expressed primarily in the testes of the adult mouse. The SLRP genes are not present in Drosophila or C. elegans , but reside in three separate gene clusters in the puffer fish, mice and humans. Targeted disruption of individual mouse SLRP genes display minor connective tissue defects such as skin fragility, tendon laxity, minor growth plate defects, and mild osteoporosis. However, double and triple knockouts of SLRP genes exacerbate these phenotypes. Both the double epiphycan/biglycan and the triple PRELP/fibromodulin/biglycan knockout mice exhibit premature osteoarthritis. ^

Visibilidad de los archivos universitarios hispanoamericanos a través de Internet

Este trabajo busca detectar la presencia en Internet de archivos universitarios existentes en países del continente americano cuyo idioma oficial sea la lengua española, y analizar sus sitios web prestando especial atención a los contenidos difundidos en ellos. Se relevaron a junio de 2013 un total de 56 sitios web. Como conclusiones principales pueden señalarse las siguientes: a) se observa un lento incremento en la cantidad de sitios web, pasando de 42 en 2005 a 56 en 2013; b) 52 por ciento corresponden a la fase histórica; c) México es el país con mayor cantidad de archivos; d) 64 por ciento posee sitio web propio; e) 80 por ciento incluye misión del archivo; f) cerca de un 20 por ciento no incluye datos de contacto; g) 74 por ciento señala los servicios ofrecidos; h) 53 por ciento disponen información descriptiva general sobre los fondos custodiados; i) 21 por ciento ofrece la posibilidad de hojear documentos a texto completo; j) 28 por ciento difunde su reglamento y procedimientos de trabajo; k) poco más del 45 por ciento incluye información sobre pautas para el acceso, consulta y reproducción de documentos; l) un bajo porcentaje incluye informaciones adicionales, predominando noticias (39 por ciento) y fotos (18 por ciento), así como legislación archivística (20 por ciento) y recursos archivísticos de interés (27 por ciento); m) en cuanto a las herramientas de la Web 2.0, 18 por ciento posee blog, 16 por ciento canales de RSS, 27 por ciento Facebook y 23 por ciento Twitter

Crises of social significances: adolescents and their projects for future work

This is a report on data raised through research, which has already finished, about Identification references in adolescents . Objetives : To analyze and reflect upon the collected data, adolescents' representations about the work field and their projects for future work. To conceptualize about the crises of social significances which produce and order sense and, therefore, organize our perceptions of work through social discourses and practices which have an impact on the subjectivity of adolescents and young adults. Methodology: Brief presentation of the concepts which frame the qualitative research in this area. Reading and analysis of fragments from adolescents' accounts, obtained in focal groups at different state secondary schools. Conclusions: The adolescents researched portray a self-image full of uncertainty and skepticism as regards their future possibilities. The impact produced by the fall of work as an ideal of doing and being is made evident in their accounts. Only some of them link their future project with an invested and valuable activity, even if this is not associated with economic safety and wellbeing. Others present themselves as incapable to modify the state of things, which offers a field connected with consumerist values and with the idea that "you are worth what you have (in material things)".