Modelling of froth transportation in industrial flotation cells: Part I. Development of froth transportation models for attached particles

Modelling of froth transportation, as part of modelling of froth recovery, provides a scale-up procedure for flotation cell design. It can also assist in improving control of flotation operation. Mathematical models of froth velocity on the surface and froth residence time distribution in a cylindrical tank flotation cell are proposed, based on mass balance principle of the air entering the froth. The models take into account factors such as cell size, concentrate launder configuration, use of a froth crowder, cell operating conditions including froth height and air rate, and bubble bursting on the surface. (C) 2004 Elsevier Ltd. All rights reserved.

How screening criteria change during brand development

Purpose - Despite the increasing sophistication of new product development (NPD) research, the reliance on traditional approaches to studying NPD has left several areas in need of further research. The authors propose addressing some of these gaps, especially the limited focus on consumer brands, evaluation criteria used across different project-review points in the NPD process, and the distinction between "kills", "successes", and "failures". Moreover, they propose investigating how screening criteria change across project-review points, using real-time NPD projects. Design/methodology/approach - A postal survey generated 172 usable questionnaires from a sample of European, North American, Far Eastern and Australian consumer packaged-goods firms, providing data on 314 new product projects covering different development and post-commercialization review points. Findings - The results confirm that acceptance-rejection criteria vary through the NPD process. However, financial criteria dominate across all the project-review points. Initial screening is coarse, focusing predominantly on financial criteria. Fit with organizational, product, brand, promotional, and market requirements dominate in the detailed screen and pre-development evaluation points. At pre-launch, decision-makers focus on product, brand, and promotional criteria. Commercial fit, production synergies, and reliability of the firm's market intelligence are significant discriminators in the post-launch review. Moreover, the importance of marketing and channel issues makes the criteria for screening brands different from those of industrial markets. Originality/value - The study, although largely descriptive and involves a relatively small sample of consumer goods firms, offers new insights into NPD project evaluation behavior. Future, larger-scale investigations covering a broader spectrum of consumer product sectors are needed to validate our results and to explain the reasons behind managers' decisions. © Emerald Group Publishing Limited.

Analysis of interactions among variables of renewable energy projects:a case study on renewable energy project in India

This study highlights the variables associated with the implementation of renewable energy (RE) projects for sustainable development in India, by using an interpretive structural modeling (ISM) - based approach to model variables' interactions, which impact RE adoption. These variables have been categorized under enablers that help to enhance implementation of RE projects for sustainable development. A major finding is that public awareness regarding RE for sustainable development is a very significant enabler. For successful implementation of RE projects, it has been observed that top management should focus on improving highdriving power enablers (leadership, strategic planning, public awareness, management commitment, availability of finance, government support, and support from interest groups).

The development and operation of the effective interpersonal relationship skills relevant to career development problems from staff assessment at an industrial research laboratory

This study concerns the application of a model of effective interpersonal relationships to problems arising from staff assessment at I.C.I. Ltd. Corporate Laboratory between 1972 and 1974. In collaboration with academic and industrial supervision, the study commenced with a survey of management and supervisor opinions about the effectiveness of current staff (work) relationships, with particular reference to the problem of recognising and developing creative potential. This survey emphasised a need to improve the relationships between staff in the staff assessment context. A survey of research into creativity emphasised the importance of the interpersonal environment for obtaining creative behaviour in an organisation context. A further survey of theories of how inter­personal behaviour related to personal creativity (therapeutic psychology) provided a model of effective interpersonal behaviour (Carkhuff, 1969) that could be applied to the organisation context of staff assessment. The objective of the project was redefined as a need to improve the conditions of interpersonal behaviour in relation to certain (career development) problems arising from staff assessment practices. In order to demonstrate the application of the model of effective interpersonal behaviour, the research student recorded interviews between himself and members of staff designed to develop and operate the dimensions of the model. Different samples of staff were used to develop the 'facilitative' and the 'action oriented' dimensions of bahaviour, and then for the operation of a helping programme (based on vocational guidance tests). These interactions have been analysed, according to the scales of measurement in the model ana the results are presented in case study form in this thesis. At each stage of the project, results and conclusions were presented to the sponsoring organisation (e.g. industrial supervisor) in order to assess their (subjective) opinion of relevance to the organ­ isation. Finally, recommendations on further actions towards general improvement of the work relationships in the laboratory were presented in a brief report to the sponsor.

Industrial new product planning:a study of the sources of new product ideas and the development of new product proposals in the UK computer industry

This thesis presents a study of the sources of new product ideas and the development of new product proposals in an organisation in the UK Computer Industry. The thesis extends the work of von Hippel by showing how the phenomenon which he describes as "the Customer Active Paradigm for new product idea generation" can be observed to operate in this Industry. Furthermore, this thesis contrasts his Customer Active Paradigm with the more usually encountered Manufacturer Active Paradigm. In a second area, the thesis draws a number of conclusions relating to methods of market research, confirming existing observations and demonstrating the suitability of flexible interview strategies in certain circumstances. The thesis goes on to demonstrate the importance of free information flow within the organisation, making it more likely that sought and unsought opportunities can be exploited. It is shown that formal information flows and documents are a necessary but not sufficient means of influencing the formation of the organisation's dominant ideas on new product areas. The findings also link the work of Tushman and Katz on the role of "Gatekeepers" with the work of von Hippel by showing that the role of gatekeeper is particularly appropriate and useful to an organisation changing from Customer Active to Manufacturer Active methods of idea generation. Finally, the thesis provides conclusions relating to the exploitation of specific new product opportunities facing the sponsoring organisation.

The development of heat recovery equipment from conception to commercialisation

A comprehensive survey of industrial sites and heat recovery products revealed gaps between equipment that was required and that which was available. Two heat recovery products were developed to fill those gaps: a gas-to-gas modular heat recovery unit; a gas-to-liquid exhaust gas heat exchanger. The former provided an entire heat recovery system in one unit. It was specifically designed to overcome the problems associated with existing component system of large design commitment, extensive installation and incompatibility between parts. The unit was intended to recover heat from multiple waste gas sources and, in particular, from baking ovens. A survey of the baking industry defined typical waste gas temperatures and flow rates, around which the unit was designed. The second unit was designed to recover heat from the exhaust gases of small diesel engines. The developed unit differed from existing designs by having a negligible effect on engine performance. In marketing terms these products are conceptual opposites. The first, a 'product-push' product generated from site and product surveys, required marketing following design. The second, a 'market-pull' product, resulted from a specific user need; this had a captive market and did not require marketing. Here marketing was replaced by commercial aspects including the protection of ideas, contracting, tendering and insurance requirements. These two product development routes are compared and contrasted. As a general conclusion this work suggests that it can be beneficial for small companies (as was the sponsor of this project) to undertake projects of the market-pull type. Generally they have a higher probability of success and are less capital intensive than their product-push counterparts. Development revealed shortcomings in three other fields: British Standards governing heat exchangers; financial assessment of energy saving schemes; degree day procedure of calculating energy savings. Methods are proposed to overcome these shortcomings.

The development and diffusion of industrial robots

This thesis describes the history of robots and explains the reasons for the international differences in robot diffusion, and the differences in the diffusion of various robot applications with reference to the UK. As opposed to most of the literature, diffusion is examined with an integrated and interdisciplinary perspective. Robot technology evolves from the interaction of development, supply and manufacture, adoption, and promotion. activities. Emphasis is given to the analysis of adoption, at present the most important limiting factor of robot advancement in the UK. Technical development is inferred from a comparison of surveys on equipment, and from the topics of ten years of symposia papers. This classification of papers is also used to highlight the international and institutional differences in robot development. Analysis of the growth in robot supply, manufacture, and use is made from statistics compiled. A series of interviews with users and potential users serves to illustrate the factors and implications of the adoption of different robot systems in the UK. Adoption pioneering takes place when several conditions exist: when the technology is compatible with the firm, when its advantages outweigh its disadvantages, and particularly when a climate exists which encourages the managerial involvement and the labour acceptance. The degree of compatibility (technical, methodological, organisational, and economic) and the consequences (profitability, labour impacts, and managerial effects) of different robot systems (transfer, manipulative, processing, and assembly) are determined by various aspects of manufacturing operations (complexity, automation, integration, labour tasks, and working conditions). The climate for adoption pioneering is basically determined by the performance of firms. The firms' policies on capital investment have as decisive a role in determining the profitability of robots as their total labour costs. The performance of the motor car industry and its machine builders explains, more than any other factor, the present state of robot advancement in the UK.

Industrial districts, inward foreign investment and regional development

This article compares the importance of agglomerations of local firms, and inward FDI as drivers of regional development. The empirical analysis exploits a unique panel dataset of the Italian manufacturing sector at the regional and industry levels. We explore whether FDI and firm agglomeration can be drivers of total factor productivity (separately and jointly), with this effect being robust to different estimators, and different assumptions about inter-regional effects. In particular, we isolate one form of firm agglomeration that is especially relevant in the Italian context, industrial districts, in order to ascertain their impact on productivity. In so doing, we distinguish standard agglomeration and localization economies from industrial districts to understand what additional impact the latter has on standard agglomeration effects. Interaction effects between FDI spillovers and different types of agglomeration economies shed some light on the heterogeneity of regional development patterns as well as on the opportunity to fine tune policy measures to specific regional contexts.

Urban labour, voice and legitimacy:economic development and the emergence of community unionism

Community unionism has emerged in the past decade as a growing strand of industrial relations research and is influencing trade union strategies for renewal. This article seeks to further develop the concept, while exploring the potential roles for unions in communities subject to projects of urban regeneration.

Decision support for lifecycle planning and risk management of small-scale biomass combined heat and power (bCHP) projects in the UK

Biomass is projected to account for approximately half of the new energy production required to achieve the 2020 primary energy target in the UK. Combined heat and power (CHP) bioenergy systems are not only a highly efficient method of energy conversion, at smaller-scales a significant proportion of the heat produced can be effectively utilised for hot water, space heating or industrial heating purposes. However, there are many barriers to project development and this has greatly inhibited deployment in the UK. Project viability is highly subjective to changes in policy, regulation, the finance market and the low cost incumbent; a high carbon centralised energy system. Unidentified or unmitigated barriers occurring during the project lifecycle may not only negatively impact on the project but could ultimately lead to project failure. The research develops a decision support system (DSS) for small-scale (500 kWe to 10 MWe) biomass combustion CHP project development and risk management in the early stages of a potential project’s lifecycle. By supporting developers in the early stages of project development with financial, scheduling and risk management analysis, the research aims to reduce the barriers identified and streamline decision-making. A fuzzy methodology is also applied throughout the developed DSS to support developers in handling the uncertain or approximate information often held at the early stages of the project lifecycle. The DSS is applied to a case study of a recently failed (2011) small-scale biomass CHP project to demonstrate its applicability and benefits. The application highlights that the proposed development within the case study was not viable. Moreover, further analysis of the possible barriers with the DSS confirmed that some possible modifications to be project could have improved this, such as a possible change of feedstock to a waste or residue, addressing the unnecessary land lease cost or by increasing heat utilisation onsite. This analysis is further supported by a practitioner evaluation survey that confirms the research contribution and objectives are achieved.

Az ipari parkok szerepe a kínai - magyar gazdasági kapcsolatok fejlesztésében (Industrial parks in the development of Hungarian – Chinese economic relations)

A kínai-magyar gazdasági kapcsolatoktól mindenki sokat várt eddig, de viszonylag kevés növekedési hatást sikerült elérnie Magyarországnak a dinamikusan felemelkedő kínai gazdaságból. A tanulmány azt vizsgálja, hogy az ipari parkok, logisztikai bázisok terén mi teheti vonzóvá Magyarországot az EU piacát megcélzó kínai vállalatok számára, illetve milyen gazdasági lehetőségek rejlenek az ipari parkok hálózatában ahhoz, hogy a kínai növekedési dinamika valamennyire érvényesüljön a magyar gazdaságban is. / === / Most of the economic and political actors in Hungary have expected high benefits from the Chinese – Hungarian economic relations, but only moderated growth impact has been imported from the dynamic emerging Chinese economy. The study surveys the potentials of industrial parks and logistic bases whether how much they can add to the attractiveness of Hungary toward the Chinese companies targeting the single market of the EU, and what range of economic opportunities is exploitable in the network of industrial parks for having the Chinese growth dynamics to prevail particularly in the Hungarian economy.