Speciation of antimony (III) and antimony (V) using hydride generation for meglumine antimoniate pharmaceutical formulationsquality control

The pentavalent antimonies, mainly the meglumine antimoniate, are recommends as first-choice medicines for leishmaniasis therapy. In this work we described the development of formulations of meglumine antimoniate injectable medication, as well as the analytical methodology used in the selective determination of Sb(III) and Sb(Total) by hydride generation - inductively coupled plasma atomic emission spectrometry (HG-ICP-AES) and ICP-AES, respectively. On that purpose the analytical methodology was developed focusing on the HG-ICP-AES technique. The formulations using propylene glycol/water as vehicles in a 20:80 proportion were more appropriate for subsequent use in industrial scale. These formulations also showed a lower variation on Sb(III) percentage, no need of buffer solution to stabilize the formulation and no influence of the autoclaving in the quality of the product. The results of the development of the analytical methodology point out the proposed method as an efficient alternative for the determination of Sb(III) in the presence of large quantities of Sb(V) in injectable solutions of meglumine antimoniate, in a selective, linear, accurate and precise manner. In addition, the method showed a low limit of quantification, less interference of the matrix, and more resilience than batch techniques proposed in the Brazilian Pharmacopeia.

Mission control system for dam inspection with an AUV

This paper presents a complete control architecture that has been designed to fulfill predefined missions with an autonomous underwater vehicle (AUV). The control architecture has three levels of control: mission level, task level and vehicle level. The novelty of the work resides in the mission level, which is built with a Petri network that defines the sequence of tasks that are executed depending on the unpredictable situations that may occur. The task control system is composed of a set of active behaviours and a coordinator that selects the most appropriate vehicle action at each moment. The paper focuses on the design of the mission controller and its interaction with the task controller. Simulations, inspired on an industrial underwater inspection of a dam grate, show the effectiveness of the control architecture

Human Exposure to Endocrine-Disrupting Chemicals and Prenatal Risk Factors for Cryptorchidism and Hypospadias: A Nested Case-Control Study

BACKGROUND. Exposure to xenoestrogens during pregnancy may disturb the development and function of male sexual organs. OBJECTIVE. In this study we aimed to determine whether the combined effect of environmental estrogens measured as total effective xenoestrogen burden (TEXB) is a risk factor for male urogenital malformations. METHODS. In a case-control study, nested in a mother-child cohort (n = 702) established at Granada University Hospital, we compared 50 newborns with diagnosis of cryptorchidism and/or hypospadias with 114 boys without malformations matched by gestational age, date of birth, and parity. Controls did not differ from the total cohort in confounding variables. TEXB and levels of 16 organochlorine pesticides were measured in placenta tissues. Characteristics of parents, pregnancy, and birth were gathered by questionnaire. We used conditional and unconditional regression models to estimate odds ratios (ORs) and 95% confidence intervals (CIs). RESULTS. TEXB from organohalogenated compounds was detectable in 72% and 54% of case and control placentas, respectively. Compared with controls, cases had an OR for detectable versus non-detectable TEXB of 2.82 (95% CI, 1.10-7.24). More pesticides were detected in cases than in controls (9.34 +/- 3.19 vs. 6.97 +/- 3.93). ORs for cases with detectable levels of pesticides, after adjusting for potential confounders in the conditional regression analysis, were o,p'-DDT (OR = 2.25; 95% CI, 1.03-4.89), p,p'-DDT (OR = 2.63; 95% CI, 1.21-5.72), lindane (OR = 3.38; 95% CI, 1.36-8.38), mirex (OR = 2.85; 95% CI, 1.22-6.66), and endosulfan alpha (OR = 2.19; 95% CI, 0.99-4.82). Engagement of mothers in agriculture (OR = 3.47; 95% CI, 1.33-9.03), fathers' occupational exposure to xenoestrogens (OR = 2.98; 95% CI, 1.11-8.01), and history of previous stillbirths (OR = 4.20; 95% CI, 1.11-16.66) were also associated with risk of malformations. CONCLUSIONS We found an increased risk for male urogenital malformations related to the combined effect of environmental estrogens in placenta.

Evaluation of work-related volatile organic compounds (VOCs) exposition in automotive painting cabins industrial cleanings

Automotive painting cabins are cleaned with several solvents, being great part of them mixtures of volatile organic compounds (VOCs), where the three xylene isomers are the most important constituents. To evaluate the work-related exposition of the cleaners that use these mixtures of solvents, xylenes have been determined in the working ambient air as well as its metabolite, o-m-p-methyl hippuric acid, has been analysed in urine to establish the dermal and respiratory exposition. This evaluation has been done in order to assess the occupational exposure to VOCs and to know the working conditions of the cleaners, but also to evaluate the effectiveness of personal protective equipment (PPE), the engineering control and the work practices.The xylenes have been chosen as indicators of exposition because they are the main components in the cleaning solvents used, with a level of concentration between 50% and 85%.The Xylenes have an occupational exposure limit (8 h TWA) of 50 ppm (221 mg/m3) and a short-term exposure limit (STEL) of 100 ppm (442 mg/m3). On the other hand, the biological exposure index (BEI) for xylenes is the sum of the total methyl hippuric acids in urine at the end of the work-shift, being the value 1500 mg/g creatinine.

Sistema electrónico para el control del clima en entornos industriales

Aquest projecte desenvolupa una electrònica de control per al clima en entorns industrials, en resum, gestiona paràmetres comtemperatura i humitat, i posa a disposició sortides que s'activen en funció dels nivells de clima adquirits. Disposa d'un afegit que el diferencia de la resta de controladors, l'opció del mode màxim confort, que automatitza el procés de consignesi actuadors per assolir uns paràmetres climatològic son l'ésser humà es troba en el seu màxim benestar. Consta de diversos circuits, una font d'alimentació de tres sortides(+5V;-5V i+12V), un sensor d'humitat, dos sensors de temperatura tipus Pt100 i un circuit principal. El hardware del circuit principal disposa d'un microcontrolador PIC, un displayLCD de 2x16caràcters, amplificadors operacionals, un bloc per a sortides de relé, comunicació USB, comunicació sèrie i altres elements. Pel que fa al software del PIC, ha estat programat en C permicrocontrolador i com a característiques principals disposa d'un control PWM per aventilador de corrent contínua, escriptura de menú jeràrquic en display a 4bits, lectura de teclat per interrupcions, timers, isubrutina específica per al control del clima.

Dashboard industrial: panell d'indicadors per gestionar una fàbrica d'una multinacional del sector d'automoció

En el context de globalització i competitivitat actuals, sobretot en el sectord’automoció, les diferències competitives entre empreses o companyies estàcada vegada més relacionada amb els factors immaterials, tals com elconeixement, la investigació, el desenvolupament tecnològic i la qualificaciódels recursos humans i l’eficiència en la gestió.L’eficiència en la gestió és bàsica per aconseguir un plus de competitivitatque és clau per satisfer els clients, i per tant, també per agilitzar lesorganitzacions i posar-les a punt per a nous reptes i per a nous models denegoci per donar resposta a la demanda de la canviant i exigent societat.Aquest treball exposa un exemple d’un sistema de gestió basat en el panelld’indicadors (“Dashboard Industrial”) per una planta d’una multinacional delsector d’automoció.Aquesta eina, que està alineada amb l’estratègia de la companyia, es potextrapolar altres empreses i a altres sectors. Està basada en lametodologia PDCA (Plan Do Check Act) és a dir planificant objectius,posant-los en pràctica mesurant-los periòdicament i prenent decisions per lamillora contínua dels resultats de cada una dels indicadors.Sens dubte, l’eficiència en la gestió és un dels factors clau per lesorganitzacions amb ànim innovador i competitiu.En el treball també es destaca la importància que té la tasca dels enginyersen la gestió al llarg de la seva vida laboral.

Control d'un robot de 3 graus de llibertat

Partint d'una estructura robòtica de 3 graus de llibertat, s'ha de fer el disseny deles unitats de potència i control , muntatge, conexionat, programació i posta enmarxa per poder generar trajectòries des d'un PC.Per aconseguir l'objectiu s'han realitzat les següents fites:a) Ajust i modificacions mecàniques de la estructura robòticaSubstitució de xavetes i canvi de pinyons.b) Implementar, modificar i ajustar elements elèctrics del robot.Substitució de motor elèctric espatllat, realitzar un nou cablejat cap a lanova unitat de control i substitució d'un sensor de posició.c) Disseny i muntatge de la unitat de potènciaSelecció de la targeta MD03 per controlar l'alimentació, velocitat i sentitde gir del motors, que controlen els 3 graus de llibertat. Mecanització enuna caixa incloent: fusibles, amperímetres i connectors. Cablejat elèctric iposta en funcionament.d) Disseny, muntatge elèctric i programació de la unitat de control.Selecció del PLC S7300Escollir el tipus de comunicacions que es realitzaran tant amb la unitat depotència com amb el PC.Disseny plànols elèctrics mitjançant el programa EPLAN.Mecanització, cablejat i posta en marxa del disseny elèctric.El disseny del software es realitzarà mitjançant l'eina de programacióSTEP7 de SiemensProgramació del PLC per poder treballar diferents tipus de moviments itrajectòriese) Disseny i programació de la interfície d'usuari des d'un PCProgramació d'una interfície gràfica mitjançant WinCC Flexible per tal quel'usuari només introduint dades pugui fer que el robot es mogui demanera manual o semiautomàtica . També s'ha programat per tal quegeneri trajectòries en mode automàtic.S'ha programat una illa de pick and place a mode d'exemplificació.

Estudi d'impacte acústic de l'avinguda de França en el municipi de Sarrià de Ter

El present projecte s’emmarca dins les accions empreses pel conveni de cooperació entre la Universitat de Girona i l’Ajuntament de Sarrià de Ter per tal d’estudiar l’impacte acústic de diferents infraestructures i activitats de Sarrià de Ter. En el cas que ens ocupa, hem tractat el terme municipal de Sarrià de Ter, estudiant tota la longitud de l’antiga N-II, actual avinguda de França, en el seu pas pel municipi per determinar-ne l’impacte acústic. Cal remarcar que Sarrià de Ter, a part de patir l’Avinguda de França com a important font de soroll, es veu afectada per una remarcable activitat industrial també al pas de l’antiga Nacional–II, pel pas de l’autopista AP-7, pel tren i per una indústria d’extracció d’àrids. El projecte de l’estudi d’impacte acústic de l’avinguda de França en el municipi de Sarrià de Ter, té com a objectiu principal mesurar i calcular els nivells de contaminació acústica, i estudiar possibles accions per tal de minimitzar l’impacte acústic del vial al municipi. El projecte d’estudi de soroll de la població de Sarrià de Ter, té com a objectiu final elaborar el mapa acústic d’impacte de la infraestructura en el seu pas pel terme municipal

Disseny dels elements constitutius per adaptar un centre de mecanitzat de control numèric a la tecnologia Incremental Sheet Forming (ISF)

Un dels processos tradicionals de conformació de xapa més utilitzats a nivell industrial, degut a la seva rapidesa d’operació i la seva maduresa del procés, és l’embotició. Per a dur a terme aquest procés és necessària la construcció d’uns utillatges (matriu i punxó) per a cada tipus de producte. Aquests utillatges estan fabricats amb materials altament resistents ja que han de poder suportar càrregues molt importants durant la deformació. A més, s’han de garantir unes precisions dimensionals molt bones per tal d’evitar el xoc entre les dues parts de l’utillatge i per a assegurar que la peça obtinguda tingui les dimensions desitjades. Aquest fet implica que el procés d’obtenció de les matrius i punxons tingui un cost molt elevat i per a amortitzar-lo és necessari que la producció sigui en massa.L’objecte d’aquest projecte és adaptar el centre de mecanitzat Kondia HS1000 per tal de poder dur a terme recerca bàsica de la tecnologia de conformat incremental de xapa (ISF) en el Grup de Recerca en Enginyeria del Producte, Procés i Producció (GREP)

Financial Markets and Real Ecinomy: Four Essays in International Trade

Financial markets play an important role in an economy performing various functions like mobilizing and pooling savings, producing information about investment opportunities, screening and monitoring investments, implementation of corporate governance, diversification and management of risk. These functions influence saving rates, investment decisions, technological innovation and, therefore, have important implications for welfare. In my PhD dissertation I examine the interplay of financial and product markets by looking at different channels through which financial markets may influence an economy.My dissertation consists of four chapters. The first chapter is a co-authored work with Martin Strieborny, a PhD student from the University of Lausanne. The second chapter is a co-authored work with Melise Jaud, a PhD student from the Paris School of Economics. The third chapter is co-authored with both Melise Jaud and Martin Strieborny. The last chapter of my PhD dissertation is a single author paper.Chapter 1 of my PhD thesis analyzes the effect of financial development on growth of contract intensive industries. These industries intensively use intermediate inputs that neither can be sold on organized exchange, nor are reference-priced (Levchenko, 2007; Nunn, 2007). A typical example of a contract intensive industry would be an industry where an upstream supplier has to make investments in order to customize a product for needs of a downstream buyer. After the investment is made and the product is adjusted, the buyer may refuse to meet a commitment and trigger ex post renegotiation. Since the product is customized to the buyer's needs, the supplier cannot sell the product to a different buyer at the original price. This is referred in the literature as the holdup problem. As a consequence, the individually rational suppliers will underinvest into relationship-specific assets, hurting the downstream firms with negative consequences for aggregate growth. The standard way to mitigate the hold up problem is to write a binding contract and to rely on the legal enforcement by the state. However, even the most effective contract enforcement might fail to protect the supplier in tough times when the buyer lacks a reliable source of external financing. This suggests the potential role of financial intermediaries, banks in particular, in mitigating the incomplete contract problem. First, financial products like letters of credit and letters of guarantee can substantially decrease a risk and transaction costs of parties. Second, a bank loan can serve as a signal about a buyer's true financial situation, an upstream firm will be more willing undertake relationship-specific investment knowing that the business partner is creditworthy and will abstain from myopic behavior (Fama, 1985; von Thadden, 1995). Therefore, a well-developed financial (especially banking) system should disproportionately benefit contract intensive industries.The empirical test confirms this hypothesis. Indeed, contract intensive industries seem to grow faster in countries with a well developed financial system. Furthermore, this effect comes from a more developed banking sector rather than from a deeper stock market. These results are reaffirmed examining the effect of US bank deregulation on the growth of contract intensive industries in different states. Beyond an overall pro-growth effect, the bank deregulation seems to disproportionately benefit the industries requiring relationship-specific investments from their suppliers.Chapter 2 of my PhD focuses on the role of the financial sector in promoting exports of developing countries. In particular, it investigates how credit constraints affect the ability of firms operating in agri-food sectors of developing countries to keep exporting to foreign markets.Trade in high-value agri-food products from developing countries has expanded enormously over the last two decades offering opportunities for development. However, trade in agri-food is governed by a growing array of standards. Sanitary and Phytosanitary standards (SPS) and technical regulations impose additional sunk, fixed and operating costs along the firms' export life. Such costs may be detrimental to firms' survival, "pricing out" producers that cannot comply. The existence of these costs suggests a potential role of credit constraints in shaping the duration of trade relationships on foreign markets. A well-developed financial system provides the funds to exporters necessary to adjust production processes in order to meet quality and quantity requirements in foreign markets and to maintain long-standing trade relationships. The products with higher needs for financing should benefit the most from a well functioning financial system. This differential effect calls for a difference-in-difference approach initially proposed by Rajan and Zingales (1998). As a proxy for demand for financing of agri-food products, the sanitary risk index developed by Jaud et al. (2009) is used. The empirical literature on standards and norms show high costs of compliance, both variable and fixed, for high-value food products (Garcia-Martinez and Poole, 2004; Maskus et al., 2005). The sanitary risk index reflects the propensity of products to fail health and safety controls on the European Union (EU) market. Given the high costs of compliance, the sanitary risk index captures the demand for external financing to comply with such regulations.The prediction is empirically tested examining the export survival of different agri-food products from firms operating in Ghana, Mali, Malawi, Senegal and Tanzania. The results suggest that agri-food products that require more financing to keep up with food safety regulation of the destination market, indeed sustain longer in foreign market, when they are exported from countries with better developed financial markets.Chapter 3 analyzes the link between financial markets and efficiency of resource allocation in an economy. Producing and exporting products inconsistent with a country's factor endowments constitutes a serious misallocation of funds, which undermines competitiveness of the economy and inhibits its long term growth. In this chapter, inefficient exporting patterns are analyzed through the lens of the agency theories from the corporate finance literature. Managers may pursue projects with negative net present values because their perquisites or even their job might depend on them. Exporting activities are particularly prone to this problem. Business related to foreign markets involves both high levels of additional spending and strong incentives for managers to overinvest. Rational managers might have incentives to push for exports that use country's scarce factors which is suboptimal from a social point of view. Export subsidies might further skew the incentives towards inefficient exporting. Management can divert the export subsidies into investments promoting inefficient exporting.Corporate finance literature stresses the disciplining role of outside debt in counteracting the internal pressures to divert such "free cash flow" into unprofitable investments. Managers can lose both their reputation and the control of "their" firm if the unpaid external debt triggers a bankruptcy procedure. The threat of possible failure to satisfy debt service payments pushes the managers toward an efficient use of available resources (Jensen, 1986; Stulz, 1990; Hart and Moore, 1995). The main sources of debt financing in the most countries are banks. The disciplining role of banks might be especially important in the countries suffering from insufficient judicial quality. Banks, in pursuing their rights, rely on comparatively simple legal interventions that can be implemented even by mediocre courts. In addition to their disciplining role, banks can promote efficient exporting patterns in a more direct way by relaxing credit constraints of producers, through screening, identifying and investing in the most profitable investment projects. Therefore, a well-developed domestic financial system, and particular banking system, would help to push a country's exports towards products congruent with its comparative advantage.This prediction is tested looking at the survival of different product categories exported to US market. Products are identified according to the Euclidian distance between their revealed factor intensity and the country's factor endowments. The results suggest that products suffering from a comparative disadvantage (labour-intensive products from capital-abundant countries) survive less on the competitive US market. This pattern is stronger if the exporting country has a well-developed banking system. Thus, a strong banking sector promotes exports consistent with a country comparative advantage.Chapter 4 of my PhD thesis further examines the role of financial markets in fostering efficient resource allocation in an economy. In particular, the allocative efficiency hypothesis is investigated in the context of equity market liberalization.Many empirical studies document a positive and significant effect of financial liberalization on growth (Levchenko et al. 2009; Quinn and Toyoda 2009; Bekaert et al., 2005). However, the decrease in the cost of capital and the associated growth in investment appears rather modest in comparison to the large GDP growth effect (Bekaert and Harvey, 2005; Henry, 2000, 2003). Therefore, financial liberalization may have a positive impact on growth through its effect on the allocation of funds across firms and sectors.Free access to international capital markets allows the largest and most profitable domestic firms to borrow funds in foreign markets (Rajan and Zingales, 2003). As domestic banks loose some of their best clients, they reoptimize their lending practices seeking new clients among small and younger industrial firms. These firms are likely to be more risky than large and established companies. Screening of customers becomes prevalent as the return to screening rises. Banks, ceteris paribus, tend to focus on firms operating in comparative-advantage sectors because they are better risks. Firms in comparative-disadvantage sectors finding it harder to finance their entry into or survival in export markets either exit or refrain from entering export markets. On aggregate, one should therefore expect to see less entry, more exit, and shorter survival on export markets in those sectors after financial liberalization.The paper investigates the effect of financial liberalization on a country's export pattern by comparing the dynamics of entry and exit of different products in a country export portfolio before and after financial liberalization.The results suggest that products that lie far from the country's comparative advantage set tend to disappear relatively faster from the country's export portfolio following the liberalization of financial markets. In other words, financial liberalization tends to rebalance the composition of a country's export portfolio towards the products that intensively use the economy's abundant factors.

Credit rationing and crowding out during the Industrial Revolution: Evidence from Hoare's Bank, 1702-1862

Crowding-out during the British Industrial Revolution has long been one of the leadingexplanations for slow growth during the Industrial Revolution, but little empirical evidence exists to support it. We argue that examinations of interest rates are fundamentally misguided, and that the eighteenth- and early nineteenth-century private loan market balanced through quantity rationing. Using a unique set of observations on lending volume at a London goldsmith bank, Hoare s, we document the impact of wartime financing on private credit markets. We conclude that there is considerable evidence that government borrowing, especially during wartime, crowded out private credit.

2007 Annual Report of the Iowa Railway Finance Authority

The Iowa Railway Finance Authority (IRFA) was created in 1980 by the 68th General Assembly to provide for the financing of rail facilities, and to enhance and continue the operation of essential rail facilities. IRFA was authorized to offer financial assistance for the acquisition, rehabilitation, construction, refinancing, extension, replacement, maintenance, repair or leasing of any rail facility. The 2005 legislative session amended Iowa Code 327H.20 by assigning all repayments of IRFA and other Iowa DOT rail assistance loans to the Rail Revolving Loan and Grant Fund. In 2006, a state appropriation of $235,000 was added to the program. In 2007, $2 million was appropriated to support rail development and job growth.

La gestión sanitaria: orientaciones a futuro para el cambio organizativo, del control y la financiación

This paper offers a general view of changes in health care management in theSpanish Health System. We focus on the organisational, financing andaccountability aspects of health care provision. We do this by encompassingmanagerial changes and social change and well-grounded in theory health economicsliterature. In this way we try to link applied economics and management issues,as we did in a former paper, ten years ago on the same basis(López-Casasnovas, 2002). We emphasise mistakes and milestones in the wayforward to improve health systems by better understanding the public natureof health policies. Key aspects of this are to achieve a better allocation ofresponsibilities to providers on patients health, to incentive the organisationof medical self-managed health care institutions and to build global budgets onrisk-adjusting capitation and better integrated health care providers on acommunity basis.

2008 Annual Report of the Iowa Railway Finance Authority

The Iowa Railway Finance Authority (IRFA) was created in 1980 by the 68th General Assembly to provide for the financing of rail facilities and to enhance and continue the operation of essential rail facilities. IRFA was authorized to offer financial assistance for the acquisition, rehabilitation, construction, refinancing, extension, replacement, maintenance, repair, or leasing of any rail facility. Rail Revolving Loan and Grant Program The 2005 legislative session amended Iowa Code 327H.20 by assigning all repayments of IRFA and other Iowa Department of Transportation (Iowa DOT) rail assistance loans to the Rail Revolving Loan and Grant Program (RRLGP). In addition, the following annual appropriations were allocated to the fund: • FY 2007: $235,000 • FY 2008: $2 million • FY 2009: $2 million Since the creation of the RRLGP in 2005, IRFA has awarded funding to 23 projects totaling over $7.2 million in grants and loans in its three rounds of competitive funding. These projects have pledged to create 1,672 jobs within two years of project completion and 1,361 jobs have been retained. Funded projects are associated with over $2 billion in total private capital investment. In 2008, the IRFA Board directed all available funds be used to help repair railroads devastated by summer flooding. On July 31, $3.9 million in deferred payment loans were offered to seven Iowa based railroads to allow for immediate repair of rail beds, including the cost of materials, labor and equipment.

Conglomeration with bankruptcy costs: Separate or joint financing?

The paper analyzes the determinants of the optimal scope of incorporation in the presenceof bankruptcy costs. Bankruptcy costs alone generate a non-trivial tradeoff between thebenefit of coinsurance and the cost of risk contamination associated to joint financing corporate projects through debt. This tradeoff is characterized for projects with binary returns,depending on the distributional characteristics of returns (mean, variability, skewness, heterogeneity, correlation, and number of projects), the bankruptcy recovery rate, and the taxrate advantage of debt relative to equity. Our testable predictions are broadly consistentwith existing empirical evidence on conglomerate mergers, spin-offs, project finance, andsecuritization.