Evaluation of 100G DP-QPSK long-haul transmission performance using second order co-pumped Raman laser based amplification

We present, for the first time, a detailed investigation of the impact of second order co-propagating Raman pumping on long-haul 100G WDM DP-QPSK coherent transmission of up to 7082 km using Raman fibre laser based configurations. Signal power and noise distributions along the fibre for each pumping scheme were characterised both numerically and experimentally. Based on these pumping schemes, the Q factor penalties versus co-pump power ratios were experimentally measured and quantified. A significant Q factor penalty of up to 4.15 dB was observed after 1666 km using symmetric bidirectional pumping, compared with counter-pumping only. Our results show that whilst using co-pumping minimises the intra-cavity signal power variation and amplification noise, the Q factor penalty with co-pumping was too great for any advantage to be seen. The relative intensity noise (RIN) characteristics of the induced fibre laser and the output signal, and the intra-cavity RF spectra of the fibre laser are also presented. We attribute the Q factor degradation to RIN induced penalty due to RIN being transferred from the first order fibre laser and second order co-pump to the signal. More importantly, there were two different fibre lasing regimes contributing to the amplification. It was random distributed feedback lasing when using counter-pumping only and conventional Fabry-Perot cavity lasing when using all bidirectional pumping schemes. This also results in significantly different performances due to different laser cavity lengths for these two classes of laser.

Synthesis and characterisation of polyacrylonitrile and its derived carbon materials

Carbon is a versatile material which is composed of different allotropes, and also come in with different structures. Carbon nanofibres (CNFs) is one dimensional carbon nanomaterials, which have exhibited superior mechanical properties, great specific area, good electrical conductivity, good biocompatibility, and ease of modification. In addition to the lower cost associated to compare with carbon nanotubes (CNTs), CNFs have been attracted in numerous applications, such as reinforcement materials, filtrations, Li-ion battery, supercapacitor as well as tissue engineering, just to list a few. Therefore, it is a great deal to understand the relationship between the fabrication conditions and the characteristics of the resulted CNFs. In this project, electrospun PAN NFs were used as precursor material to fabricate carbon nanofibres. In order to produce CNFs with good morphology, the processing parameters of PAN nanofibres by electrospinning was optimized toward to the morphology at solution concentration of 12 wt%. The optimized processing parameters at given concentration were 16 kV, 14 cm and 1.5 mL/h, which led to the formation of PAN NFs with average fibre diameter of approximately 260 nm. Along with the effect of processing parameter study, the effect of concentration on the morphology was also carried out at optimized processing parameters. It was found that by increasing concentration of PAN solution from 2 to 16%, the resulted PAN transformed from beads only, to beaded fibres and finally to smooth fibres. With further increasing concentration the morphology of smooth fibres remain with increase in the fibre diameter. Electrospun PAN NFs with average fibre of 306 nm was selected to be converted into CNFs by using standard heating procedures, stabilisation in air at 280 °C and carbonization in N2. The effect of carbonization temperature ranging from 500 to 1000 °C was investigated, by using SEM, FTIR, Raman, and Impedance spectroscopy. With increasing carbonization temperature from 500 to 1000 °C, the diameter of NFs was decreased from 260 to 187, associated with loss of almost all functional groups of NFs. It was indicated by Raman results, that the graphitic crystallite size was increased from 2.62 to 5.24 nm, and the activation energy obtained for this growth was 7570 J/mol. Furthermore, impedance results (i.e. Cole-Cole plot) revealed that the electrical characteristic of CNFs transitioned from being insulating to electrically conducting in nature, suggested by the different electrical circuits extracted from Cole-Cole plots with carbonization temperature from 500 to 800 °C. The carbonization on PAN NFs with diameter of ~431nm was carried out by using novel route, microwave plasma enhance chemical vapour deposition (MPECVD) process. To compare with carbonized PAN NFs by using conventional route, MPECVD was not only able to facilitate carbonization process, but more interestingly can form carbon nanowalls (CNWs) grown on the surfaces of carbonized PAN NFs. Suggested by the unique morphology, the potential applications for the resulted carbon fibrous hybrid materials are supercapacitor electrode material, filtrations, and etc., The method developed in this project required one step less, compared with other literature. Therefore, using MPECVD on stabilised PAN NFs is proposed as economical, and straightforward approach towards mass production of carbon fibrous hybrid materials containing CNWs.

First-Order Conditions for Optimization Problems with Quasiconvex Inequality Constraints

2000 Mathematics Subject Classification: 90C46, 90C26, 26B25, 49J52.

Interval Oscillation for Second Order Nonlinear Differential Equations with a Damping Term

2000 Mathematics Subject Classification: 34C10, 34C15.

Brillouin optical time-domain analysis assisted by second-order Raman amplification

We propose and experimentally demonstrate a new method to extend the range of Brillouin optical time domain analysis (BOTDA) systems. It exploits the virtual transparency created by second-order Raman pumping in optical fibers. The idea is theoretically analyzed and experimentally demonstrated in a 50 km fiber. By working close to transparency, we also show that the measurement length of the BOTDA can be increased up to 100 km with 2 meter resolution. We envisage extensions of this technique to measurement lengths well beyond this value, as long as the issue of relative intensity noise (RIN) of the primary Raman pump can be avoided. © 2010 Optical Society of America.

Az ajánlati könyv statisztikai tulajdonságai (Statistical properties of the limit order book)

A pénzügyi modellek jelentős része feltételezi a piacok hatékony működését. Ennek következtében számos tudományos kutatás központi témája volt a piacok hatékonyságának tesztelése és ennek igazolása, esetleg cáfolata. Ezen próbálkozások azonban mind a mai napig eredménytelenül zárultak. A tesztelések nyomán a kutatások a termékek áralakulásából indultak ki, és a hozamokat ezen keresztül elemezték. Az elmúlt években azonban a fókusz átterelődött az árak alakulásáról egy elemibb tényezőre, az ajánlati könyvre. Ugyanis végső soron az ajánlatvezérelt piacokon az árakat az ajánlati könyvbe benyújtott megbízások alakulása fogja meghatározni. Mivel a tőzsdék jelentős része ajánlatvezérelt piacként működik, ezért érdemesnek tartották a kutatók, hogy inkább az ajánlati könyv alakulásának statisztikai jellemzőit elemezzék, hátha az eredményre vezet, és sikerül közelebb jutni a hatékony piacok elméletének igazolásához vagy cáfolatához. Jelen tanulmány célja az, hogy az eddig megjelent tudományos kutatások alapján ismertesse az ajánlati könyv alapvető statisztikai tulajdonságait, és rávilágítson arra: mindez valójában hozzájárult-e a hatékony piacok elméletének igazolásához? ______ Most of the fi nancial models assume that markets are effi cient. As a result, numerous scientifi c researchers were focused on testing the effi cient market hypothesis, and tried to prove, or deny it. However, all these attempts are still unsuccessful. During these researches, the analyses of the effi cient market hypothesis were based on the price evolution of a certain asset, and through this the returns were examined. In the recent years the research interest has changed, and instead of analyzing the returns, a more primary factor got into focus, namely the limit order book. The reason is that on order driven markets the prices and the order sizes in the limit order book infl uence the price evolution on the market. Since a notable number of stock markets operate as an order driven market, the researchers thought that it worth analyzing the statistical properties of the limit order book, because maybe it will get us closer to the proof of the effi cient market hypothesis. The purpose of this study is to summarize the statistical properties of the limit order book, based on the scientifi c works published so far. The study would like to highlight whether these studies contributed to the proof or disproof of the effi cient market hypothesis.

Átmenet vagy spontán rend(etlenség)? = Transition or spontaneous order/disorder?

Az írás arra a kérdésre keresi a választ, hogy a két évtized után tartóssá, vagyis trenddé váló gazdasági és társadalmi eltérések a "posztkommunista" országok között milyen okokra vezethetők vissza. Másodsorban azt elemzi, mi a jelentősége e sokrétű különbségek modellszerű kategorizálásának. Ennek alapja az állami szerepvállalás mértéke és minősége. Végül harmadikként azt a kérdéskört vizsgálja, hogy az eltérések milyen következményekkel járnak. A fő következtetés az, hogy a közösségi választások ugyan jelentősek, ezek szerepe azonban a pályafüggőséghez képest sokkal kisebb, mint azt a legtöbb elmélet föltételezi. Az eredmény - Hayekkel szólva (Hayek [1995]) - emberi cselekvés, ámde nem emberi tervezet szülötte. _____ The article seeks to discover what causes can be traced for the economic and social differences that have become permanent or a trend after two decades. Secondly, it analy-ses what importance this model-like categorization of manifold differences bears. Thirdly and lastly, it examines the sphere of questions to do with the consequences of these differences. The main conclusion is that the community choices are significant, but their role is much less, by comparison with career dependence, than most theories assume. Achievement, to quote Hayek (1995) is borne of human endeavour, not human planning.

Obama és az új világrend a gazdasági válság tükrében (Obama and the new world order in light of the economic crisis)

Napjainkban a nemzetközi kapcsolatok meghatározó jelensége a gazdasági világválság, amelynek kezelése kapcsán egyre gyakrabban merül fel a politikusok és az elemzők szóhasználatában az „új világrend” fogalma. ____ In treating the current global economic crisis, politicians and analysts increasingly refer to a "new world order". The paper examines this concept, its different meanings and historical evolution, as well as the role it plays in the rhetoric of the Obamaadministration.

Climate change and freshwater zooplankton: what does it boil down to?

Recently, major advances in the climate–zooplankton interface have been made some of which appeared to receive much attention in a broader audience of ecologists as well. In contrast to the marine realm, however, we still lack a more holistic summary of recent knowledge in freshwater. We discuss climate change-related variation in physical and biological attributes of lakes and running waters, high-order ecological functions, and subsequent alteration in zooplankton abundance, phenology, distribution, body size, community structure, life history parameters, and behavior by focusing on community level responses. The adequacy of large-scale climatic indices in ecology has received considerable support and provided a framework for the interpretation of community and species level responses in freshwater zooplankton. Modeling perspectives deserve particular consideration, since this promising stream of ecology is of particular applicability in climate change research owing to the inherently predictive nature of this field. In the future, ecologists should expand their research on species beyond daphnids, should address questions as to how different intrinsic and extrinsic drivers interact, should move beyond correlative approaches toward more mechanistic explanations, and last but not least, should facilitate transfer of biological data both across space and time.

An order batching and processing heuristic to address aisle congestion in a manual order picking warehouse with order due dates

A heuristic for batching orders in a manual order-picking warehouse has been developed. It prioritizes orders based on due time to prevent mixing of orders of different priority levels. The order density of aisles criterion is used to form batches. It also determines the number of pickers required and assigns batches to pickers such that there is a uniform workload per unit of time. The effectiveness of the heuristic was studied by observing computational time and aisle congestion for various numbers of total orders and number of orders that form a batch. An initial heuristic performed well for small number of orders, but for larger number of orders, a partitioning technique is computationally more efficient, needing only minutes to solve for thousands of orders, while preserving 90% of the batch quality obtained with the original heuristic. Comparative studies between the heuristic and other published heuristics are needed. ^

Methodology to create cost estimation models for engineer-to-order operations

This research addresses the problem of cost estimation for product development in engineer-to-order (ETO) operations. An ETO operation starts the product development process with a product specification and ends with delivery of a rather complicated, highly customized product. ETO operations are practiced in various industries such as engineering tooling, factory plants, industrial boilers, pressure vessels, shipbuilding, bridges and buildings. ETO views each product as a delivery item in an industrial project and needs to make an accurate estimation of its development cost at the bidding and/or planning stage before any design or manufacturing activity starts. ^ Many ETO practitioners rely on an ad hoc approach to cost estimation, with use of past projects as reference, adapting them to the new requirements. This process is often carried out on a case-by-case basis and in a non-procedural fashion, thus limiting its applicability to other industry domains and transferability to other estimators. In addition to being time consuming, this approach usually does not lead to an accurate cost estimate, which varies from 30% to 50%. ^ This research proposes a generic cost modeling methodology for application in ETO operations across various industry domains. Using the proposed methodology, a cost estimator will be able to develop a cost estimation model for use in a chosen ETO industry in a more expeditious, systematic and accurate manner. ^ The development of the proposed methodology was carried out by following the meta-methodology as outlined by Thomann. Deploying the methodology, cost estimation models were created in two industry domains (building construction and the steel milling equipment manufacturing). The models are then applied to real cases; the cost estimates are significantly more accurate than the actual estimates, with mean absolute error rate of 17.3%. ^ This research fills an important need of quick and accurate cost estimation across various ETO industries. It differs from existing approaches to the problem in that a methodology is developed for use to quickly customize a cost estimation model for a chosen application domain. In addition to more accurate estimation, the major contributions are in its transferability to other users and applicability to different ETO operations. ^

The order selection and lot sizing problem in the make-to-order environment

This research is motivated by the need for considering lot sizing while accepting customer orders in a make-to-order (MTO) environment, in which each customer order must be delivered by its due date. Job shop is the typical operation model used in an MTO operation, where the production planner must make three concurrent decisions; they are order selection, lot size, and job schedule. These decisions are usually treated separately in the literature and are mostly led to heuristic solutions. The first phase of the study is focused on a formal definition of the problem. Mathematical programming techniques are applied to modeling this problem in terms of its objective, decision variables, and constraints. A commercial solver, CPLEX is applied to solve the resulting mixed-integer linear programming model with small instances to validate the mathematical formulation. The computational result shows it is not practical for solving problems of industrial size, using a commercial solver. The second phase of this study is focused on development of an effective solution approach to this problem of large scale. The proposed solution approach is an iterative process involving three sequential decision steps of order selection, lot sizing, and lot scheduling. A range of simple sequencing rules are identified for each of the three subproblems. Using computer simulation as the tool, an experiment is designed to evaluate their performance against a set of system parameters. For order selection, the proposed weighted most profit rule performs the best. The shifting bottleneck and the earliest operation finish time both are the best scheduling rules. For lot sizing, the proposed minimum cost increase heuristic, based on the Dixon-Silver method performs the best, when the demand-to-capacity ratio at the bottleneck machine is high. The proposed minimum cost heuristic, based on the Wagner-Whitin algorithm is the best lot-sizing heuristic for shops of a low demand-to-capacity ratio. The proposed heuristic is applied to an industrial case to further evaluate its performance. The result shows it can improve an average of total profit by 16.62%. This research contributes to the production planning research community with a complete mathematical definition of the problem and an effective solution approach to solving the problem of industry scale.

Use of the DACUM process in the identification and verification of competencies for the medical administrative assistant

Medicine has changed in recent years. Medicare will all of its rules and regulations, worker's compensation laws, managed care and the trend toward more and larger group practices all contributed to the creation of an extremely structured regulatory environment which in turn demanded highly trained medical administrative assistants.^ The researcher noted three primary problems in the identification of competencies for the medical administrative assistant position: A lack of curricula, diverse roles, and a complex environment which has undergone radical change in recent years and will continue to evolve. Therefore, the purposes of the study were to use the DACUM process to develop a relevant list of competencies required by the medical administrative assistant practicing in physicians' offices in South Florida; determine the rank order of importance of each competency using a scale of one to five; cross-validate the DACUM group scores with a second population who did not participate in the DACUM process; and establish a basis for a curriculum framework for an occupational program.^ The DACUM process of curriculum development was selected because it seemed best suited to the need to develop a list of competencies for an occupation for which no programs existed. A panel of expert medical office administrative staff was selected to attend a 2-day workshop to describe their jobs in great detail. The panel, led by a trained facilitator, listed major duties and the respective tasks of their job. Brainstorming techniques were used to develop a consensus.^ Based upon the DACUM workshop, a survey was developed listing the 8 major duties and 71 tasks identified by the panel. The survey was mailed to the DACUM group and a second, larger population who did not participate in the DACUM. The survey results from the two groups were then compared. The non-DACUM group validated all but 3 of the 71 tasks listed by the DACUM panel. Because the three tasks were rated by the second group as at least "somewhat important" and rated "very important" by the DACUM group, the researcher recommended the inclusion of all 71 tasks in program development for this occupation. ^

Regulating Casino Gaming: A Checklist for States Considering It

In his essay - Regulating Casino Gaming: A Checklist for States Considering It – by Leonard E. Goodall, Professor of Management and Public Administration, College of Business and Econornics, University of Nevada, Las Vegas, Professor Goodall initially states: “Since various states are likely to continue to debate the issue of the establishment of legal casinos, and since states considering legal casinos must also decide how best to regulate them, the author discusses the similarities and contrasts in the regulatory systems already in operation.” Certainly not all states have solicited casino gaming, or what people generally refer to as gambling, but many have and the list is growing. If casinos are to be, and indications are that many more states will endorse gaming as a source of revenue, then regulating them must follow as a matter of due course says the author. Keep in mind this essay was written in 1988, and the actuality of casino gaming has indeed come to fruition in many states. “Nevada, having legalized casino gaming in 1931, has over a half-century of experience with the regulatory process,” Professor Goodall informs. “When New Jersey approved the establishment of casinos in Atlantic City in 1976, state officials studied the Nevada system carefully and adopted many of Nevada's procedures.” Professor Goodall bullet-points at least 7 key elements that states wanting to pursue gaming should, or in the cases of Nevada and New Jersey, have already addressed in regard to regulation of the industry. Goodall parses, in more detail, those essentials. The ultimate form of regulation is ownership Goodall says. Either state run, or private are the logical options. “The arguments for private ownership have been both pragmatic and political,” Goodall says. “Legislators, like the general public, are skeptical of the ability of state bureaucracies to run big businesses in an efficient manner. Many of them also believe regulation can be more effective if there is at least an arm's-length distance between regulation and ownership,” the professor opines. Additionally important to consider is the purpose of legalization, says Goodall. Are the proceeds earmarked for general funds, or to be used specifically? Geographic considerations are key, Goodall points out. “This decision will depend partly on a state's reasons for having casinos in the first place,” he expands. “New Jersey's policy, for example, is obviously consistent with its goal of using casinos to reinvigorate Atlantic City.” “In both states, one of the most important functions of the regulatory agencies is that of licensing, the process of investigating individuals or organizations and then authorizing them to participate in the gaming business,” Goodall provides. In closing, Goodall says there is no need for ensuing states to reinvent the wheel when it comes to casino gaming regulation. Nevada and New Jersey already provide two good designs from which to emulate and/or build upon.

Discipline And Due Process In The Workplace

In the article - Discipline and Due Process in the Workplace – by Edwin B. Dean, Assistant Professor, the School of Hospitality Management at Florida International University, Assistant Professor Dean prefaces his article with the statement: “Disciplining employees is often necessary for the maintenance of an effective operation. The author discusses situations which require discipline and methods of handling employees, including the need for rules and due process.” In defining what constitutes appropriate discipline and what doesn’t, Dean says, “Fair play is the keystone to discipline in the workplace. Discrimination, caprice, favoritism, and erratic and inconsistent discipline can be costly and harmful to employee relations, and often are a violation of law.” Violation of law is a key phrase in this statement. The author offers a short primer on tact in regard to disciplining an employee. “Discipline must be tailored to the individual,” Dean offers a pearl of wisdom. “A frown for one can cause a tearful outbreak; another employee may need the proverbial two-by-four in order to get his attention.” This is a perceptive comment, indeed, and one in which most would concede but not all would follow. Dean presents a simple outline for steps in the disciplinary process by submitting this suggestion for your approval: “The steps in the disciplinary process begin perhaps with a friendly warning or word of advice. The key here is friendly,” Dean declares. “It could progress to an oral or written reprimand, followed by a disciplinary layoff, terminating in that equivalent of capital punishment, discharge.” Ouch [!]; in order from lenient to strident. Dean suggests these steps are necessary in order to maintain decorum in the workplace. Assistant Professor Dean references the Weingarter Rule. It is a rule that although significant, most employees, at least non-union employees, don’t know is in their quiver. “If an interview is likely to result in discipline, the employee is entitled to have a representative present, whether a union is involved or not,” the rule states. “The employer is not obligated to inform the employee of the rule, but he is obligated to honor the employee's request, if made,” Dean explains. Dean makes an interesting point by revealing that a termination often reflects as much on the institution as it does the employee suffering the termination. The author goes on to list several infractions that could warrant an employee disciplinary action, with possible approaches toward each. Dean also cautions against capricious disciplinary action; if not handled properly a discipline could and can result in a lawsuit against the institution itself.