Custo energético de construção de uma instalação para armazenagem de feno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ação de produtos químicos in vitro e in vivo sobre Clavibacter michiganensis subsp. michiganensis, agente causal do cancro bacteriano do tomateiro

O presente trabalho teve como objetivo avaliar a sensibilidade in vitro e in vivo de um isolado de Clavibacter michiganensis subsp. michiganensis (Cmm) aos produtos cloridrato de kasugamicina, fulusulfamide e oxitetraciclina. Para o teste in vitro, foram avaliados os halos de inibição formados ao redor de discos de papel de filtro umedecidos com os produtos, nas concentrações de 0, 1, 10, 100 e 1000 mig mL-1, 24 h após a instalação do ensaio. Quanto à avaliação dos produtos in vivo, dois ensaios foram instalados sob condições de casa-de-vegetação, com plantas de tomateiro cultivar Ângela Hiper, através da inoculação das plantas por dois métodos: pulverização foliar e ferimento no caule. Nos dois ensaios, as plantas foram pulverizadas com os produtos cloridrato de kasugamicina a 0,06 mL L-1, fulusulfamide a 0,025, 0,05 e 0,075 mL L-1 e oxitetraciclina a 0,40 g L-1, duas vezes antes e duas vezes após a inoculação, em intervalos médios de 5-7 dias. Foram avaliados a incidência de folíolos doentes (inoculação foliar) e a severidade dos sintomas nas plantas inoculadas por ferimento no caule. Verificou-se que o isolado de Cmm foi sensível in vitro ao cloridrato de kasugamicina, ao fulusulfamide e à oxitetraciclina, respectivamente a partir das concentrações de 1000, 100 e 10 mig mL-1. Com relação aos ensaios in vivo, apenas oxitetraciclina propiciou menor incidência de folíolos doentes nas plantas inoculadas através de pulverização foliar; nenhum produto teve êxito em controlar a doença nas plantas inoculadas por ferimento no caule. O fulusulfamide, em todas as concentrações, foi fitotóxico aos folíolos das plantas de tomateiro.

Relações entre condutividade hidráulica, transmissividade, condutância longitudinal e sólidos totais dissolvidos para o aquífero livre de Caçapava do Sul (RS), Brasil

A água subterrânea é um importante recurso ao abastecimento público, principalmente para comunidades periféricas em grandes cidades ou pequenos municípios, onde a instalação ou prolongamento de sistemas de distribuição são economicamente inviáveis. Estudos voltados à análise da vulnerabilidade de aquíferos são relevantes para subsídio a políticas públicas em saneamento básico e preservação ambiental. Este estudo contou com o cadastro de 23 poços rasos localizados no município de Caçapava do Sul (RS), onde foram realizadas medidas de resistividade elétrica e cargabilidade por meio de geofísica, e medidas diretas de condutividade hidráulica e sólidos totais dissolvidos. A análise estatística dos dados demonstrou diversos graus de correlação entre parâmetros, basicamente condicionados a fatores geológicos como porosidade, permeabilidade e sólidos totais dissolvidos.

Avaliação da influência de cargas verticais sobre diferentes rodas compactadoras no ciclo de semeadura do milho

Assim como outras culturas de origem tropical, o milho exige durante o seu ciclo vegetativo, calor e umidade para se desenvolver, e as condições de instalação da cultura podem definir uma boa ou má produção. O objetivo deste trabalho foi avaliar a influência de cargas verticais sobre rodas compactadoras no ciclo da cultura do milho. Este trabalho foi conduzido nas Faculdades Associadas de Uberaba - FAZU, no município de Uberaba (MG), e instalado no delineamento em blocos ao acaso com três modelos de rodas compactadoras e três cargas verticais com duas repetições, na Pista de Ensaios de Semeadura, constituída de canais de solo. Observou-se que o número de dias para emergência, altura de plantas, número de folhas e a produção não foram afetados significativamente para os tratamentos estudados.

Mapping oil spill environmental sensitivity in cardoso island state park and surroundings areas, São Paulo, Brazil

This study presents an environmental oil spill sensitivity map of Cardoso Island State Park, located in São Paulo state, Brazil, including some of its surrounding areas. This map was designed following the procedures determined by the Brazilian Federal Environment Organ (Ministry of the Environment), which separates coastal habitats in different littoral sensitivity indexes (LSI) to oil spills. We have also analysed some seasonal variations in morphologic and textural parameters at the local marine beaches that could affect their sensitivity, having found that they are more sensitive during summer due to a wider foreshore zone during these periods. Local most sensitive habitats are estuarine mangroves (LSI 10) and estuarine mud banks (LSI 9). Marine beaches were ranked LSI 3, and littoral rocky shores were subdivided in exposed flat rocky shores (LSI 1), boulder rocky shores (LSI 6) and sheltered rocky shores (LSI 8). Due to the elevated sensitivity of an estuarine system in the area, we considered necessary the installation of an Environmental Emergency Centre and the design of an emergency plan for the region in case of an accident resulting in oil spills within its vicinities. (C) 2007 Elsevier Ltd. All rights reserved.

Some particularities of dam rehabilitation projects

The number of dams, which need rehabilitation, is growing, not only in countries that have a long tradition in dam building and operation but,also in those regions where the infrastructure is still in full development. Though rehabilitation projects generally deal with problems that are common in dam engineering practice there are some peculiarities which are a characteristic of such projects and which must be duly taken into account to avoid unsuccess and/or unnecessary costs. Regular safety inspection is essential to forestall the development of structural, hydrological and operational unsafety. if need of major repair or overall rehabilitation of a dam becomes apparent design oft he rehabilitation project must be preceded by a comprehensive checkup of the structure and appurtenant works, as well as by an evaluation of its hydrological safety inclusive of all relevant environmental aspects. The availability of complete records on the clam's structural behaviour and on meteorological and hydrological data, as well as the knowledge of the materials properties of the existing structure are important for the successful design of a rehabilitation project. To this end the installation of monitoring devices in the existing structure may be necessary to generate representative data. While the criteria to be used in structural design should correspond to current standards, the definition of hydrological design criteria depends on considerations that vary widely from region to region or even from one country to another. Some basic hydrological safety requirements, however, are recommended for general acceptance. Dam rehabilitation projects demand very careful and detailed construction planning because of their dependence on river flow conditions, operational restrictions and, often, on procedures or limitations imposed to avoid harm to the environment. of utmost importance is the timely availability of the financial funds required to complete the project, in order to avoid delays which could result in structural or operational unsafety. Since every dam sooner or later will have to undergo major repair or updating of safety, rehabilitation may evolve to a speciality of dam engineering.

Reproductive aspects in female rats exposed prenatally to hydrocortisone

We investigated the effects of hydrocortisone during the prenatal period and its later repercussion on reproductive aspects of female rats. Pregnant rats were treated (s.c.) with hydrocortisone acetate, at 1.5 mg/day on the 17th, 18th, and 19th days of pregnancy. Although the present study was not intended to identify mechanisms of toxicity, the treatment with hydrocortisone in the last period of pregnancy presented no signs of toxicity. The efficacy of the hydrocortisone in reducing the adrenal wet mass and plasma corticosterone levels immediately after delivery in both the treated mothers and in respective pups at birth may indicate impairment of the hypothalamus-pituitary-adrenal axis. In addition, the treatment with hydrocortisone did not interfere in the development of the female descendants until puberty. However, it affected the estrous cycle and fertility, Probably, the prenatal exposure to corticosteroids had altered at least partially the hypothalamus-pituitary-gonadal axis, resulting in the damages observed in adult life. These results indicate that the use of the hydrocortisone at a dose that apparently does not endanger the neonate led to undesirable effects in the adult reproductive phase, resulting in later deleterious alteration of the reproductive physiology in female rats. (C) 2004 Elsevier B.V. All rights reserved.

Ocular Reconstruction After Zygomatic Complex Fracture With Retention of a Foreign Body

Facial injuries with the retention of foreign bodies inside the tissues, both in soft and hard ones, can cause major functional and aesthetic damage. Among the different etiological agents, cutting tools, fragments of a firearm, the splinter of wood, steel, or iron, launched by misuse, or even caused by defects in equipment, are the main cause of these injuries. The aim of this study was to discuss the peculiarity of the multidisciplinary approach in caring of a 33-year-old man, victim of an accident at work, by the rupture of an emery disc and consequent penetration of the fragments in violation of the tissues in the orbital and zygomatic region of the left side, with perforation of the eyeball and orbital-zygomatic fracture. Urgent treatment consisted of debridement of wounds, bleeding control, removal of foreign bodies, fracture reduction with rigid internal fixation, and suture, performed by the oral and maxillofacial surgical team. Reconstruction of orbital tissues by the ophthalmology team consisted of suture of the injuries. About 1 month after the trauma, phthisis bulbi was noted, and the patient underwent a new procedure under general anesthesia for eye evisceration and installation of an alloplastic prosthesis associated with the homogenous sclera. Facial harmony was restored, especially in aesthetics and function of the zygomatic-orbital complex.

Deproteinized bovine bone mineral in marginal defects at implants installed immediately into extraction sockets: an experimental study in dogs

Aim: To evaluate the influence of deproteinized bovine bone mineral (DBBM) particles concomitant with the placement of a collagen membrane on alveolar ridge preservation and on osseointegration of implants placed into alveolar sockets immediately after tooth extraction. Material and methods: The pulp tissue of the mesial roots of 3P3 was removed in six Labrador dogs and the root canals were filled. Flaps were elevated in the right side of the mandible, and the buccal and lingual alveolar bony plates were exposed. The third premolar was hemi-sectioned and the distal root was removed. A recipient site was prepared and an implant was placed lingually. After implant installation, defects of about 0.6mm wide and 3.1mm depth resulted at the buccal aspects of the implant, both at the test and at the control sites. The same surgical procedures and measurements were performed on the left side of the mandible. However, DBBM particles with a size of 0.25-1mm were placed into the remaining defect concomitant with the placement of a collagen membrane. Results: All implants were integrated into mature bone. No residual DBBM particles were detected at the test sites after 4 months of healing. Both the test and the control sites showed buccal alveolar bone resorption, 1.8 +/- 1.1 and 2.1 +/- 1mm, respectively. The most coronal bone-to-implant contact at the buccal aspect was 2 +/- 1.1 an 2.8 +/- 1.3mm, at the test and the control sites, respectively. This difference in the distance was statistically significant. Conclusion: The application of DBBM concomitant with a collagen membrane to fill the marginal defects around implants placed into the alveolus immediately after tooth extraction contributed to improved bone regeneration in the defects. However, with regard to buccal bony crest preservation, a limited contribution of DBBM particles was achieved.

Bone healing pattern in surgically created circumferential defects around submerged implants: an experimental study in dog

Objective: To describe the healing of marginal defects below or above 1 mm of dimension around submerged implants in a dog model.Material and methods: In 12 Labrador dogs, all mandibular premolars and first molars were extracted bilaterally. After 3 months of healing, full-thickness flaps were elevated in the edentulous region of the right side of the mandible. Two recipient sites were prepared and the marginal 5mm were widened to such an extent to obtain, after implant installation, a marginal gap of 0.5mm at the mesial site (small defect) and of 1.25mm at the distal site (large defect). Titanium healing caps were affixed to the implants and the flaps were sutured allowing a fully submerged healing. The experimental procedures were subsequently performed in the left side of the mandible. The timing of the experiments and sacrifices were planned in such a way to obtain biopsies representing the healing after 5, 10, 20 and 30 days. Ground sections were prepared and histomorphometrically analyzed.Results: The filling of the defect with newly formed bone was incomplete after 1 month of healing in all specimens. Bone formation occurred from the base and the lateral walls of the defects. A larger volume of new bone was formed in the large compared with the small defects. Most of the new bone at the large defect was formed between the 10- and the 20-day period of healing. After 1 month of healing, the outline of the newly formed bone was, however, located at a similar distance from the implant surface (about 0.4mm) at both defect types. Only minor newly formed bone in contact with the implant, starting from the base of the defects, was seen at the large defects (about 0.8mm) while a larger amount was detected at the small defects (about 2.2 mm).Conclusion: Marginal defects around titanium implants appeared to regenerate in 20-30 days by means of a distance osteogenesis. The bone fill of the defects was, however, incomplete after 1 month.

Healing outcomes at implants installed in grafted sites: an experimental study in dogs

Aim: To evaluate the integration of implants installed using a surgical guide in augmented sites with autologous bone or deproteinized bovine bone mineral (DBBM) blocks, concomitantly with a collagen membrane.Material and methods: Mandibular molars were extracted bilaterally in six Labrador dogs, the buccal bony wall was removed, and a box-shaped defect was created. After 3 months, flaps were elevated, a bony graft was harvested from the ascending ramus, and secured to the lateral wall of the defect by means of screws. In the left mandibular side, a DBBM block was fixed into the defect. A resorbable membrane was applied at both sides, and the flaps were sutured. After 3 months, flaps were elevated, and a customized device was used as surgical guide to prepare the recipient sites in the interface between grafts and parent bone. One implant was installed in each side of the mandible. After 3 months, biopsies were harvested, and ground sections were prepared for histologic evaluation.Results: One autologous bone block graft was lost before implant installation. The width of the alveolar crest at the test sites (DBBM) was 5.4 +/- 1.2 mm before, 9.4 +/- 1.2 mm immediately after grafting, and 9.3 +/- 1 mm at implant installation. At the control sites (autologous bone), the corresponding values were: 5.2 +/- 1, 9 +/- 1.2, and 8.7 +/- 0.9 mm, respectively. All implants installed were available for histologic evaluation (n = 5). The autologous bone grafts, rich in vessels and cells, were integrated in the parent bone, and only little non-vital bone was found. The BIC% was 56.7 +/- 15.6% and 54.2 +/- 13.2% at the buccal and lingual aspects, respectively. At the test sites, the DBBM appeared to be embedded into connective tissue, and very little newly formed bone was encountered within the grafts. The BIC% was 5.8 +/- 12.3% and 51.3 +/- 14.2% at the buccal and lingual aspects, respectively.Conclusions: Autologous bone blocks used to augment the alveolar bony crest horizontally allowed the complete osseointegration of implants installed after 3 months of healing. However, similar blocks of DBBM did not promote osseointegration, although the installed implants were stable owing to the osseointegration in the sites of the parent bone.