The Effect of Season on Semen Characteristics and Freezability in Bos indicus and Bos taurus Bulls in the Southeastern Region of Brazil

The objectives of this study were to evaluate the effects of season in southeast of Brazil comparing genotypes on semen characteristics, freezability and peripheral plasma concentrations of testosterone. Ejaculates of five Bos indicus bulls and six Bos taurus bulls were evaluated over a period of 27 months, which was divided into winter (July, August, September), spring (October, November, December), summer (January, February, March) and autumn (April, May, June). Semen was evaluated according to standard procedures for ejaculate volume, sperm concentration, gross-motility, progressive motility and sperm morphology. After preparing and freezing the ejaculates according to commercial procedures, the straws were stored in liquid N(2) until post-thaw evaluation. Ejaculate volume, sperm concentration, gross-motility, progressive sperm motility, vigor and morphological sperm defects were significantly influenced by season and genotype (p < 0.05). Heat tolerance was better in B. indicus bulls than in B. taurus bulls characterized by lower values of sperm abnormalities throughout the observation period. The highest values were recorded for abnormal heads followed by cytoplasmatic droplets in B. taurus bulls. The proportion of ejaculates which were eliminated before freezing for reasons of bad quality was lower in the B. indicus bulls. Temporal changes in peripheral plasma testosterone concentrations were higher in B. indicus bulls than in B. taurus bulls not revealing seasonal influences. The results of this study show clear genotype differences regarding semen quality. Freezability of B. taurus semen varies considerably throughout the year, leading to a high proportion of eliminated ejaculates. Collecting semen from B. taurus bulls during the summer in an artificial insemination centre may not be profitable.

Effect of iron on enamel demineralization and remineralization in vitro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of alveolex on the bone defects repair stimulated by rhBMP-2: Histomorphometric study

OBJECTIVE: The aim of this study was to evaluate histomorphometrically the effect of alveolex (Propolis 10%) on the repair of bone cavities in the calvaria of rats. MATERIALS and METHODS: A 5 mm diameter bone defect was made in the calvaria of male Wistar rats using the drill-type trephine. The defects were filled with rhBMP-21Alveolex, rhBMP-2, Alveolex, or coagulum. Twenty-eight animals with seven subjects on each were sacrificed 30 days after surgery and samples were fixed and embedded in paraffin. Histological sections stained by HE (hematoxylin and eosin) were obtained from the calvaria bone defect and analyzed by a differential point-counting method. RESULTS: Group I and II, rhBMP-21Alveolex and rhBMP-2, respectively, presented higher levels of newly formed bone than other groups (P < 0.001). There were not significant differences between groups I and II (P > 0.05). In addition, there was not significant difference between groups III and IV, Control-Coagulum and Alveolex, respectively (P > 0.05). CONCLUSION: Alveolex has increased the bone repair in calvaria defects of rats when associated to rhBMP-2, however without significant differences for rhBMP-2 isolated group; Alveolex isolated group showed the lowest levels of newly formed bone with no significant differences to coagulum group (control). Microsc. Res. Tech. 75: 36-41, 2012. (C) 2011 Wiley Periodicals, Inc.

Long-term effect of carbodiimide on dentin matrix and resin-dentin bonds

Objectives: To characterize the interaction of 1-Ethyl-3-[3-dimethylaminopropyl] carbodiimide Hydrochloride (EDC) with dentin matrix and its effect on the resin-dentin bond. Methods: Changes to the stiffness of demineralized dentin fragments treated with EDC/N-hydroxysuccinimide (NHS) in different solutions were evaluated at different time points. The resistance against enzymatic degradation was indirectly evaluated by ultimate tensile strength (UTS) test of demineralized dentin treated or not with EDC/NHS and subjected to collagenase digestion. Short- and long-term evaluations of the strength of resin-dentin interfaces treated with EDC/NHS for 1 h were performed using microtensile bond strength (mu TBS) test. All data (MPa) were individually analyzed using ANOVA and Tukey HSD tests (alpha = 0.05). Results: The different exposure times significantly increased the stiffness of dentin (p < 0.0001, control-5.15 and EDC/NHS-29.50), while no differences were observed among the different solutions of EDC/NHS (p = 0.063). Collagenase challenge did not affect the UTS values of EDC/NHS group (6.08) (p > 0.05), while complete degradation was observed for the control group (p = 0.0008, control-20.84 and EDC/NHS-43.15). EDC/NHS treatment did not significantly increase resin-dentin mu TBS, but the values remained stable after 12 months water storage (p < 0.05). Conclusions: Biomimetic use of EDC/NHS to induce exogenous collagen cross-links resulted in increased mechanical properties and stability of dentin matrix and dentin-resin interfaces. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 94B: 250-255, 2010.

Effect of thermocycling on hardness, absorption, solubility and colour change of soft liners

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of Misfit on Preload Maintenance of Retention Screws of Implant-Supported Prostheses

The aim of this study was to evaluate the effect of unilateral misfit at different levels on a crown-implant-retention screw system of implant-supported crowns. Hexagon castable UCLA abutments were cast in Co-Cr alloy to fabricate 48 metallic crowns divided into four groups (n = 12). Group A: crowns did not present misfit; Groups B, C and D: crowns were fabricated with unilateral misfit of 50, 100, and 200 mu m, respectively. The crowns were attached by titanium retention screw with 30 N/cm to external hexagonal osseointegrated implants embedded in acrylic resin. After 2 min, the retention screw of each replica was submitted to detorque evaluation by an analogic torque gauge. Three retention screws were used to perform detorque evaluation at each replica and the procedure was repeated twice with each screw. Each group was submitted to 72 detorque measurements. Data were evaluated by ANOVA and Tukey test (P < 0.05). All groups exhibited significant decrease (P < 0.05) in preload and the lowest decrease occurred in Group A. Groups B, C, and D were statistically significant different from Group A (P < 0.05), but there was no statistically significant difference between Groups B and D (P > 0.05). Crowns with unilateral misfit presented higher preload decrease than crowns completely fitted to osseointegrated implants.

Effect of disinfection on adhesion of reline polymers

Cylinders (3.5 x 5.0 mm) of the reline resins Kooliner (K), New Truliner (N), Tokuso Rebase Fast (T), and Ufi Gel Hard (U) were bonded to cylinders (20 x 20 mm) of the denture base resin Lucitone 550 (L), and samples were divided into two controls and four test groups (n = 8). Shear tests (0.5 mm/min) were performed after polymerization or immersion in water (37 degrees C) for 7 days (controls); two or seven cycles of disinfection by immersion in sodium perborate (50 degrees C/10 min) or microwave irradiation (650 W/6 min). Statistical analyses (alpha = 0.05) revealed that two cycles of microwave and chemical disinfection increased the mean bond strengths of materials T (9.08 to 12.93 MPa) and L (18.89 to 23.02 MPa). For resin L, seven cycles of chemical (15.72 MPa) and microwave (17.82 MPa) disinfection decreased the shear bond strength compared with the respective control (21.74 MPa). Resins U (13.12 MPa), K (8.44 MPa), and N (7.98 MPa) remained unaffected.

Effect of thermocycling on the flexural and impact strength of urethane-based and high-impact denture base resins

Objective: Mechanical properties of the acrylic resins used for denture fabrication may be influenced by water and temperature. Thus, the aim of this study was to evaluate the effect of thermocycling on the flexural and impact strength of a high-impact (Lucitone 199) and a urethane-based denture material (Eclipse).Materials and methods: Flexural strength (64 x 10 x 3.3 mm) and impact strength (60 x 6 x 4 mm) specimens were made following the manufacturers' instructions and assigned to two groups (n = 10): control (C) - not thermocycled - and T - thermocycled (5000 cycles between 5 and 55 degrees C). Specimens were submitted to three-point bending and Charpy impact tests.Results: Flexural strength (MPa) and impact strength (kJ/m(2)) data were analysed with two-way ANOVA (p = 0.05). The flexural strength of material Eclipse (C, 136.5; T, 130.7) was significantly higher than that of resin Lucitone 550 (C, 99.4; T, 90.1). Material Eclipse exhibited significantly higher impact strength (C, 6.9; T, 5.3) than the resin Lucitone 550 (C, 3.5; T, 3.0). For both materials, a significant decrease in flexural and impact strengths was observed when the specimens were thermocycled.Conclusion: Flexural and impact strengths were higher for Eclipse than for Lucitone 550, in both groups. Thermocycling decreased the flexural and impact strengths of Eclipse and Lucitone 550.

The effect of refuge on Dermestes ater (Coleoptera : Dermestidae) predation on Musca domestica (Diptera : Muscidae): Refuge for prey or the predator?

It is believed that habitat heterogeneity can change the extent of predator-prey interactions. Therefore, in this study we examined the effect of habitat heterogeneity (characterized here as an addition of refuge) on D. ater predation on M. domestica. Predation of D. ater on M. domestica larvae was carried out in experimental habitats with and without refuge, and examined at different prey densities. The number of prey eaten by beetles over 24 h of predator-prey interaction was recorded, and we investigated the strength of interaction between prey and predator in both experimental habitats by determining predator functional response. The mean number of prey eaten by beetles in the presence of refuge was significantly higher than in the absence of refuge. Females had greater weight gains than males. Logistic regression analyses revealed the type II functional response for both experimental habitats, even though data did not fit well into the random predator model. Results suggest that the addition of refuge in fact enhanced predation, as prey consumption increased in the presence of refuge. Predators kept in the presence of refuge also consumed more prey at high prey densities. Thus, we concluded that the addition of refuge was an important component mediating D. ater-M. domestica population interactions. Refuge actually acted as a refuge for predators from prey, since prey behaviors detrimental to predators were reduced in this case.

Effect of mangiferin on the development of periodontal disease: Involvement of lipoxin A(4), anti-chemotaxic action in leukocyte rolling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Case Study: The Effect of Visitors on Two Captive Pumas With Respect to the Time of the Day

This study analyzed the effects of noise levels and number of visitors on the behaviors of a mother puma and her daughter in a zoo environment with respect to the time of day. The study monitored visitation (noise and number) over two 1-week periods (4 weeks between periods) and frequency of various puma behaviors (videorecorded). The study analyzed videotaped behavior of the pumas based on the time of day and visitors number and noise levels. There was a direct association of puma behaviors with visitors number and noise levels. The daughter puma was the most affected and behavioral changes of both pumas correlated more strongly with the noise level than the number of visitors. The noise level and number of visitors affected the behavior of the mother and her daughter only in the morning. The results of this study indicate that both noise level and number of visitors affected these pumas but revealed the noise as predominant. Moreover, the response of these pumas to visitors depended on the time of the day.

The inhibitory effect of MK886 on the inflammatory process caused by Paracoccidioidomycosis brasiliensis infection in genetically selected mice

Leukotrienes are classic inflammatory response mediators considered chemotactic agents and microbicidal activity regulators in cells of the innate immune system, playing a protective role against different infectious agents. In this study, we investigated the involvement of leukotrienes in the course of murine paracoccidioidomycosis based on the following immunologic parameters: cell influx, mieloperoxydase activity, NO production, cytokine production, and fungal recovery in lungs of mice selected according to the intensity of their low (AIRmin) and high (AIRmax) acute inflammatory response. Infection by P. brasiliensis induced considerable production of IL-6, IL-10, IFN-gamma and TNF-alpha cytokines, and led to cell recruitment, as well as NO production in lungs at different study periods. In animals treated with MK886, a leukotriene biosynthesis inhibitor, IFN-gamma, IL-6 and TNF-alpha production was lower, while neutrophil influx and NO production decreased. These results may explain the higher fungal load in lungs of animals in which leukotriene synthesis was inhibited, suggesting that leukotrienes have a possible protective role in experimental paracoccidioidomycosis. AIRmax animals had lower fungal load in comparison with AIRmin ones, which can be related to the AIR phenotype regarding neutrophil migration, besides lower production of NO and pro-inflammatory cytokines. Thus, mice presenting AIRmax background are more resistant to infection by P. brasiliensis.