Flexure of composite plates

A new higher order shear deformation theory of laminated composite plates is developed. The basic displacement variables in this theory are two partial normal displacements and two in-plane displacement parameters. The governing equations are presented in the form of four simultaneous partial differential equations. The shear deformation theories of Bhimareddy and Stevens, and of Reddy are special cases of this formulation. In their models, transverse shear strains will become zero at points in the plate where displacements are constrained to be zero such as those on fixed edges. This limitation has been overcome in the present formulation.

Estrogen modulation of retinol-binding protein in immature chicks: Comparison with riboflavin carrier protein

The kinetics of estrogen (E) modulation of retinol-binding protein (RBP) production in the liver of immature chicks were compared with those governing de novo induction of riboflavin carrier protein (RCP) in the same tissue. A single dose of E markedly enhanced the plasma levels of RBP without any detectable lag period to reach peak value by 24 h and this was followed by a decline to attain the baseline by 4 days. There was no amplification of the response during secondary stimulation unlike the case with RCP induction. With multiple E administration, the 4-fold increased plasma RBP concentrations were sustained at a steady state during both primary and secondary stimulations, whereas concomitant RCP concentration progressively increased with each hormone administration and this response was further amplified during secondary stimulation. Unlike RCP induction, enhanced RBP accumulation was not strictly E dose dependent although a minimal threshold level of the steroid was required to elicit measurable response. Progesterone (P) could neither modulate nor substitute for E in enhancing plasma levels of either of the 2 proteins while the anti-estrogens, en- and zuclomifene citrate severely suppressed the production of both the proteins. RCP induction was completely inhibited by both α-amanitin and cycloheximide for prolonged periods while E-stimulated RBP production was affected only partially by α-amanitin. Likewise, cycloheximide inhibition of RBP accumulation followed a pattern similar to that of hepatic general protein synthesis.

Incompressible boundary layer for longitudinal flow over a cylinder with an applied magnetic field

The flow, heat and mass transfer problem for a steady laminar incompressible boundary layer flow in an electrically conducting fluid over a longitudinal cylinder with an applied magnetic field has been studied. The partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme. The results are found to be strongly dependent on the magnetic field and dissipation parameter. The effect of the mass transfer is more pronounced on the skin friction than on the heat transfer. The results have been compared with those of the series solution, the asymptotic solution, the Glauert and Lighthill's solution, local similarity, local nonsimilarity and difference-differential methods. Good agreement is found with all of them, except with the results of the local similarity and series solution methods.

3-D kinematical conservation laws (KCL): Evolution of a surface in R-3 - in particular propagation of a nonlinear wavefront

3-D KCL are equations of evolution of a propagating surface (or a wavefront) Omega(t), in 3-space dimensions and were first derived by Giles, Prasad and Ravindran in 1995 assuming the motion of the surface to be isotropic. Here we discuss various properties of these 3-D KCL.These are the most general equations in conservation form, governing the evolution of Omega(t) with singularities which we call kinks and which are curves across which the normal n to Omega(t) and amplitude won Omega(t) are discontinuous. From KCL we derive a system of six differential equations and show that the KCL system is equivalent to the ray equations of 2, The six independent equations and an energy transport equation (for small amplitude waves in a polytropic gas) involving an amplitude w (which is related to the normal velocity m of Omega(t)) form a completely determined system of seven equations. We have determined eigenvalues of the system by a very novel method and find that the system has two distinct nonzero eigenvalues and five zero eigenvalues and the dimension of the eigenspace associated with the multiple eigenvalue 0 is only 4. For an appropriately defined m, the two nonzero eigenvalues are real when m > 1 and pure imaginary when m < 1. Finally we give some examples of evolution of weakly nonlinear wavefronts.

CFD Analysis of conjugate natural convection in a vertical annulus

Conjugate natural convection in a vertical annulus with a centrally located vertical heat generating rod is studied numerically. The governing equations are discretized on a staggered mesh and are solved using a pressure-correction algorithm. A parametric study is performed by varying the Grashof number, aspect ratio, and the solid-to-fluid thermal conductivity ratio over wide ranges with the Prandtl number fixed at 0.7. Results are presented for the variation of several quantities of interest such as the local Nusselt numbers on the inner and outer boundaries, the axial variation of the centerline and interface temperatures, maximum solid, average solid and average interface temperature variations with Grashof number, and the average Nusselt number variation for the inner and outer boundaries with Grashof number. The average Nusselt number from the conjugate analysis is found to be between the Nusselt numbers of the isothermal and the isoflux cases. The average Nusselt numbers on the inner and outer boundaries show an increasing trend with the Grashof number. Correlations are presented for the Nusselt number and the dimensionless temperatures of interest in terms of the parameters of the problem.

Noble Metal Ionic Catalysts

Because of growing environmental concerns and increasingly stringent regulations governing auto emissions, new more efficient exhaust catalysts are needed to reduce the amount of pollutants released from internal combustion engines. To accomplish this goal, the major pollutants in exhaust-CO, NOx, and unburned hydrocarbons-need to be fully converted to CO2, N-2, and H2O. Most exhaust catalysts contain nanocrystalline noble metals (Pt, Pd, Rh) dispersed on oxide supports such as Al2O3 or SiO2 promoted by CeO2. However, in conventional catalysts, only the surface atoms of the noble metal particles serve as adsorption sites, and even in 4-6 nm metal particles, only 1/4 to 1/5 of the total noble metal atoms are utilized for catalytic conversion. The complete dispersion of noble metals can be achieved only as ions within an oxide support. In this Account, we describe a novel solution to this dispersion problem: a new solution combustion method for synthesizing dispersed noble metal ionic catalysts. We have synthesized nanocrystalline, single-phase Ce1-xMxO2-delta and Ce1-x-yTiyMxO2-delta (M = Pt, Pd, Rh; x = 0,01-0.02, delta approximate to x, y = 0.15-0.25) oxides in fluorite structure, In these oxide catalysts, pt(2+), Pd2+, or Rh3+ ions are substituted only to the extent of 1-2% of Ce4+ ion. Lower-valent noble metal ion substitution in CeO2 creates oxygen vacancies. Reducing molecules (CO, H-2, NH3) are adsorbed onto electron-deficient noble metal ions, while oxidizing (02, NO) molecules are absorbed onto electron-rich oxide ion vacancy sites. The rates of CO and hydrocarbon oxidation and NOx reduction (with >80% N-2 selectivity) are 15-30 times higher in the presence of these ionic catalysts than when the same amount of noble metal loaded on an oxide support is used. Catalysts with palladium ion dispersed in CeO2 or Ce1-xTixO2 were far superior to Pt or Rh ionic catalysts. Therefore, we have demonstrated that the more expensive Pt and Rh metals are not necessary in exhaust catalysts. We have also grown these nanocrystalline ionic catalysts on ceramic cordierite and have reproduced the results we observed in powder material on the honeycomb catalytic converter. Oxygen in a CeO2 lattice is activated by the substitution of Ti ion, as well as noble metal ions. Because this substitution creates longer Ti-O and M-O bonds relative to the average Ce-O bond within the lattice, the materials facilitate high oxygen storage and release. The interaction among M-0/Mn+, Ce4+/Ce3+, and Ti4+/Ti3+ redox couples leads to the promoting action of CeO2, activation of lattice oxygen and high oxygen storage capacity, metal support interaction, and high rates of catalytic activity in exhaust catalysis.

Central America: Labor Reports and Child Labor Reports Pursuant to the Trade Act of 2002, Section 2102(c)(8)-(9)

[Excerpt] These comments are in response to the “Request for Information Concerning Labor Rights in Costa Rica, El Salvador, Guatemala, Honduras and Nicaragua and their Laws Governing Exploitative Child Labor” published at 68 Fed. Reg. 19580 (April 21, 2003). This Request for Information was issued pursuant to Section 2102(c)(8) and (9) of the Trade Act of 2002, Pub. L. 107-210, which requires the President, with respect to any proposed trade agreement, to submit to Congress a “meaningful labor rights report” and a “report describing the extent to which the country or countries that are parties to the agreement have in effect laws governing exploitative child labor.”

A Hierarchical System of Learning Automata

A learning automaton operating in a random environment updates its action probabilities on the basis of the reactions of the environment, so that asymptotically it chooses the optimal action. When the number of actions is large the automaton becomes slow because there are too many updatings to be made at each instant. A hierarchical system of such automata with assured c-optimality is suggested to overcome that problem.The learning algorithm for the hierarchical system turns out to be a simple modification of the absolutely expedient algorithm known in the literature. The parameters of the algorithm at each level in the hierarchy depend only on the parameters and the action probabilities of the previous level. It follows that to minimize the number of updatings per cycle each automaton in the hierarchy need have only two or three actions.

Semanttisen webin ontologisen tekstiilikäsitteistön kehittäminen ja liittäminen museoiden luettelointitietoihin

DEVELOPING A TEXTILE ONTOLOGY FOR THE SEMANTIC WEB AND CONNECTING IT TO MUSEUM CATALOGING DATA The goal of the Semantic Web is to share concept-based information in a versatile way on the Internet. This is achievable using formal data structures called ontologies. The goal of this re-search is to increase the usability of museum cataloging data in information retrieval. The work is interdisciplinary, involving craft science, terminology science, computer science, and museology. In the first part of the dissertation an ontology of concepts of textiles, garments, and accessories is developed for museum cataloging work. The ontology work was done with the help of thesauri, vocabularies, research reports, and standards. The basis of the ontology development was the Museoalan asiasanasto MASA, a thesaurus for museum cataloging work which has been enriched by other vocabularies. Concepts and terms concerning the research object, as well as the material names of textiles, costumes, and accessories, were focused on. The research method was terminological concept analysis complemented by an ontological view of the Semantic Web. The concept structure was based on the hierarchical generic relation. Attention was also paid to other relations between terms and concepts, and between concepts themselves. Altogether 977 concept classes were created. Issues including how to choose and name concepts for the ontology hierarchy and how deep and broad the hierarchy could be are discussed from the viewpoint of the ontology developer and museum cataloger. The second part of the dissertation analyzes why some of the cataloged terms did not match with the developed textile ontology. This problem is significant because it prevents automatic ontological content integration of the cataloged data on the Semantic Web. The research datasets, i.e. the cataloged museum data on textile collections, came from three museums: Espoo City Museum, Lahti City Museum and The National Museum of Finland. The data included 1803 textile, costume, and accessory objects. Unmatched object and textile material names were analyzed. In the case of the object names six categories (475 cases), and of the material names eight categories (423 cases), were found where automatic annotation was not possible. The most common explanation was that the cataloged field was filled with a long sentence comprised of many terms. Sometimes in the compound term, the object name and material, or the name and the way of usage, were combined. As well, numeric values in the material name cataloging field prevented annotation and so did the absence of a corresponding concept in the ontology. Ready-made drop-down lists of materials used in one cataloging system facilitated the annotation. In the case of naming objects and materials, one should use terms in basic form without attributes. The developed textile ontology has been applied in two cultural portals, MuseumFinland and Culturesampo, where one can search for and browse information based on cataloged data using integrated ontologies in an interoperable way. The textile ontology is also part of the national FinnONTO ontology infrastructure. Keywords: annotation, concept, concept analysis, cataloging, museum collection, ontology, Semantic Web, textile collection, textile material

Exact calculations of survival probability for diffusion on growing lines, disks, and spheres: The role of dimension

Unlike standard applications of transport theory, the transport of molecules and cells during embryonic development often takes place within growing multidimensional tissues. In this work, we consider a model of diffusion on uniformly growing lines, disks, and spheres. An exact solution of the partial differential equation governing the diffusion of a population of individuals on the growing domain is derived. Using this solution, we study the survival probability, S(t). For the standard nongrowing case with an absorbing boundary, we observe that S(t) decays to zero in the long time limit. In contrast, when the domain grows linearly or exponentially with time, we show that S(t) decays to a constant, positive value, indicating that a proportion of the diffusing substance remains on the growing domain indefinitely. Comparing S(t) for diffusion on lines, disks, and spheres indicates that there are minimal differences in S(t) in the limit of zero growth and minimal differences in S(t) in the limit of fast growth. In contrast, for intermediate growth rates, we observe modest differences in S(t) between different geometries. These differences can be quantified by evaluating the exact expressions derived and presented here.

Stream power criterion and design of sand bed channels at incipient motion

The critical stream power criterion may be used to describe the incipient motion of cohesionless particles of plane sediment beds. The governing equation relating ``critical stream power'' to ``shear Reynolds number'' is developed by using the present experimental data as well as the data from several other sources. Simultaneously, a resistance equation, relating the ``particle Reynolds number'' to the``shear Reynolds number'' is developed for plane sediment beds in wide channels with little or no transport. By making use of these relations, a procedure is developed to design plane sediment beds such that any two of the four design variables, including particle size, energy/friction slope, flow depth, and discharge per unit width in the channel should be known to predict the remaining two variables. Finally, a straightforward design procedure using design tables/design curves and analytical methods is presented to solve six possible design problems.

An exploratory investigation of the practice of assessment for learning in Vietnamese higher education: Three case studies of lecturers' practice

In response to limited research conducted on the practice of assessment for learning (AfL) in higher education and in Asian educational settings, this qualitative study, using sociocultural theories of learning and a multiple case study approach, investigates how AfL was implemented by three lecturers in one Vietnamese university. Findings revealed that the lecturers engaged with AfL principles and practices to some extent. However, despite the lecturers' significant efforts, Vietnamese sociocultural factors such as respect for harmony, hierarchy, and examination-oriented learning, impacted on their practice of AfL. This study therefore argues that AfL requires adaptation for it to be effective in the Vietnamese tertiary context.

Regulation beyond government: Weber, Foucault and the liberal governance of media content

This paper steps back from the question of how regulation of digital media content occurs, and whether it can be effective, to consider the rationales that inform regulation, and the ethics and practices associated with content regulation. It will be argued that Max Weber's account of bureaucratic expertise remains relevant to such discussions, particularly insofar as it intersects with Michel Foucault's concept of governmentality, and contemporary applications of the notion of 'governing at a distance'. The nature of the challenges to media regulators presented by online environments, and by digital and social media, are considered in depth, but it is argued that the significance of regulatory innovations that respond to such challenges should not be underestimated, nor should the continuing national foundations of media regulation. It will also discuss the relevance of the concept of 'soft law' to contemporary regulatory practice.

An Analysis of a Boundary Layer Diffusion Flame Over a Porous Flat Plate in a Confined Flow

A numerical analysis of the gas dynamic structure of a two-dimensional laminar boundary layer diffusion flame over a porous flat plate in a confined flow is made on the basis of the familiar boundary layer and flame sheet approximations neglecting buoyancy effects. The governing equations of aerothermochemistry with the appropriate boundary conditions are solved using the Patankar-Spalding method. The analysis predicts the flame shape, profiles of temperature, concentrations of variousspecies, and the density of the mixture across the boundary layer. In addition, it also predicts the pressure gradient in the flow direction arising from the confinement ofthe flow and the consequent velocity overshoot near the flame surface. The results of thecomputation performed for an n-pentane-air system are compared with experimental data andthe agreement is found to be satisfactory.

On a linear steady-state system of equations in microcontinuum fluid mechanics

Galerkin representations and integral representations are obtained for the linearized system of coupled differential equations governing steady incompressible flow of a micropolar fluid. The special case of 2-dimensional Stokes flows is then examined and further representation formulae as well as asymptotic expressions, are generated for both the microrotation and velocity vectors. With the aid of these formulae, the Stokes Paradox for micropolar fluids is established.