On the role of tin in the infiltration of aluminium by aluminium for rapid prototyping applications

The use of tin as an alloying element in the production of freeformed infiltrated aluminium components is explored. Tin slows the growth of the aluminium nitride skeleton which provides dimensional stability, as well as increasing the rate of infiltration of the aluminium liquid into the aluminium nitride skeleton. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Performance of improved guayule lines in Australia

Guayule (Parthenium argentatum Gray) is a potential source of commercial natural rubber. Its commercialisation depends mainly on economical plant production. The objective of this study was to evaluate the performance of improved lines in Australia. Seeds from five improved lines (AZ-1, AZ-2, AZ-3, AZ-5 and AZ-6) and two previously developed guayule lines (N 565 and 11591) were obtained from the Agricultural Research Service (ARS) of the United States Department of Agriculture (USDA). Seedlings from these lines were grown in a glasshouse for 3 months and later transplanted in a field experiment in early September 2001. Plant height and width were monitored from transplanting to 62 weeks at regular intervals. After 62 weeks, plant dry matter production, rubber and resin content, and yields were analysed. Plant height and width of the improved lines were higher than N 565 and 11591. Plant dry matter, rubber and resin yields were significantly different among lines. Of the five lines, AZ-1 and AZ-2 produced rubber yields of 620 and 550 kg/ha, respectively and these yields were significantly greater than for N 565 (371 kg/ha) and 11591 (391 kg/ha). AZ-1 and AZ-2 also produced significantly higher resin yields, 727 and 668 kg/ha, respectively, than those for N 565 (436 kg/ha) and 11591 (325 kg/ha). Rubber and resin yield increase of lines, AZ-1 and AZ-2, were in the range of 41-68% and 53-123%, respectively over N 565 and 11591. AZ-1 tended to produce higher rubber and resin yields than AZ-2 but exhibited highly variable plant height (CV = 25%) and width (CV = 41%) indicating potential for further genetic improvement. AZ-2 offers the best combination of desirable characters including early vigour, uniformity and comparatively higher rubber and resin yields. (C) 2003 Published by Elsevier B.V.

Field trial of a new aeration system for enhancing biodegradation in a biopile

The influence of a new aeration system on the biopile performance was investigated. The purpose was to increase biodegradation efficiency by optimising airflow through the pile. During a 1-month field trial, the performance of a new system using two perforated vertical pipes with wind-driven turbines was compared with that of a standard pile configuration with two horizontal perforated pipes. Both piles were composed of a similar mix of diesel-contaminated soils, woodchips, compost and NPK fertiliser. Hydrocarbons were recovered using solvent extraction, and determined both gravimetrically and by gas chromatography. Total heterotrophs, pH and moisture content were also assessed. Air pressure measurements were made to compare the efficiency of suction in the pipes. Results at the end of the experiment showed that there was no significant difference between the two piles in the total amount of hydrocarbon biodegradation. The normalised degradation rate was, however, considerably higher in the new system than in the standard one, suggesting that the vertical venting method may have improved the efficiency of the biological reactions in the pile. The pressure measurements showed a significant improvement in the suction produced by the new aeration system. However, many factors other than the airflow (oxygen supply) may influence and limit the biodegradation rates, including moisture content, age of contaminants and the climatic conditions. Additional experiments and modelling need to be carried out to explore further the new aeration method and to develop criteria and guidelines for engineering design of optimal aeration schemes in order to achieve maximum biodegradation in biopiles. (C) 2003 Elsevier Ltd. All rights reserved.

Comparative proteomic analysis of GS-NSO murine myeloma cell lines with varying recombinant monoclonal antibody production rate

We have employed an inverse engineering strategy based on quantitative proteome analysis to identify changes in intracellular protein abundance that correlate with increased specific recombinant monoclonal antibody production (qMab) by engineered murine myeloma (NSO) cells. Four homogeneous NSO cell lines differing in qMab were isolated from a pool of primary transfectants. The proteome of each stably transfected cell line was analyzed at mid-exponential growth phase by two-dimensional gel electrophoresis (2D-PAGE) and individual protein spot volume data derived from digitized gel images were compared statistically. To identify changes in protein abundance associated with qMab clatasets were screened for proteins that exhibited either a linear correlation with cell line qMab or a conserved change in abundance specific only to the cell line with highest qMab. Several proteins with altered abundance were identified by mass spectrometry. Proteins exhibiting a significant increase in abundance with increasing qMab included molecular chaperones known to interact directly with nascent immunoglobulins during their folding and assembly (e.g., BiP, endoplasmin, protein disulfide isomerase). 2D-PAGE analysis showed that in all cell lines Mab light chain was more abundant than heavy chain, indicating that this is a likely prerequisite for efficient Mab production. In summary, these data reveal both the adaptive responses and molecular mechanisms enabling mammalian cells in culture to achieve high-level recombinant monoclonal antibody production. (C) 2004 Wiley Periodicals, Inc.

Applying ontologies to business and systems modelling techniques and perspectives: Lessons learned

For many years in the area of business systems analysis and design, practitioners and researchers alike have been searching for some comprehensive basis on which to evaluate, compare, and engineer techniques that are promoted for use in the modelling of systems' requirements. To date, while many frameworks, factors, and facets have been forthcoming, none appear to be based on a sound theory. In light of this dilemma, over the last 10 years, attention has been devoted by researchers to the use of ontology to provide some theoretical basis for the advancement of the business systems modelling discipline. This paper outlines how we have used a particular ontology for this purpose over the last five years. In particular we have learned that the understandability and the applicability of the selected ontology must be clear for IS professionals, the results of any ontological evaluation must be tempered by economic efficiency considerations of the stakeholders involved, and ontologies may have to be focused for the business purpose and type of user involved in the modelling situation.

Ex ante evaluations of alternate data structures for end user queries: Theory and experimental test

The data structure of an information system can significantly impact the ability of end users to efficiently and effectively retrieve the information they need. This research develops a methodology for evaluating, ex ante, the relative desirability of alternative data structures for end user queries. This research theorizes that the data structure that yields the lowest weighted average complexity for a representative sample of information requests is the most desirable data structure for end user queries. The theory was tested in an experiment that compared queries from two different relational database schemas. As theorized, end users querying the data structure associated with the less complex queries performed better Complexity was measured using three different Halstead metrics. Each of the three metrics provided excellent predictions of end user performance. This research supplies strong evidence that organizations can use complexity metrics to evaluate, ex ante, the desirability of alternate data structures. Organizations can use these evaluations to enhance the efficient and effective retrieval of information by creating data structures that minimize end user query complexity.

A companison of socially responsible and conventional investors

Socially responsible investment is a rapidly emerging phenomenon within the field of personal investment. However, the factors that lead investors to choose socially responsible investment products are not well understood, especially in an Australian context. This study provides a comparative examination of conventional and socially responsible investors, with the aim of identifying such factors. A total of 55 conventional investors and 54 ethical investors participated in the study by completing mailed questionnaires about their investment and general behaviour and their attitudes and beliefs. Results indicated some important differences between socially responsible and conventional investors in their beliefs of the importance of ethical issues, their investment decision-making style, and their perceptions of moral intensity. These results support the notion that socially responsible investors differ in critical ways to conventional investors, and are discussed in terms of theoretical and practical implications.

Experience as a moderator of the media equation: the impact of flattery and praise

This study extends previous media equation research, which showed that the effects of flattery from a computer can produce the same general effects as flattery from humans. Specifically, the study explored the potential moderating effect of experience on the impact of flattery from a computer. One hundred and fifty-eight students from the University of Queensland voluntarily participated in the study. Participants interacted with a computer and were exposed to one of three kinds of feedback: praise (sincere praise), flattery (insincere praise), or control (generic feedback). Questionnaire measures assessing participants' affective state. attitudes and opinions were taken. Participants of high experience, but not low experience, displayed a media equation pattern of results, reacting to flattery from a computer in a manner congruent with peoples' reactions to flattery from other humans. High experience participants tended to believe that the computer spoke the truth, experienced more positive affect as a result of flattery, and judged the computer's performance more favourably. These findings are interpreted in light of previous research and the implications for software design in fields such as entertainment and education are considered. (C) 2004 Elsevier Ltd. All rights reserved.

'Slippage' is not a dirty word: Considering the usefulness of Giddens' notion of knowledgeability in understanding the possibilities for teacher education

The attempt to understand the relationship between messages intended and messages received has been an enduring issue in teacher education. For the past three decades researchers have made forays into understanding this enduring issue, and in the process have drawn on various explanatory frameworks, one of them being socialisation. In this paper we work with Giddens' structuration theory as well as his concept of knowledgeability as analytical frameworks for understanding the relationship between messages intended (by the teacher educator) and messages received (by the student-teachers). Our discussion is informed by the findings of a study that investigated student-teachers' interpretations of the pedagogical process of a physical education teacher education course. Data generated from conversations with, and observations of, the student-teachers indicated that there was considerable “slippage” between the teacher educator's critical pedagogy inspired intentions and what was understood by the student-teachers.

Using the effect size to model change in preference values from descriptive health status

Objectives: This pilot study describes a modelling approach to translate group-level changes in health status into changes in preference values, by using the effect size (ES) to summarize group-level improvement. Methods: ESs are the standardized mean difference between treatment groups in standard deviation (SD) units. Vignettes depicting varying severity in SD decrements on the SF-12 mental health summary scale, with corresponding symptom severity profiles, were valued by a convenience sample of general practitioners (n = 42) using the rating scale (RS) and time trade-off methods. Translation factors between ES differences and change in preference value were developed for five mental disorders, such that ES from published meta-analyses could be transformed into predicted changes in preference values. Results: An ES difference in health status was associated with an average 0.171-0.204 difference in preference value using the RS, and 0.104-0.158 using the time trade off. Conclusions: This observed relationship may be particular to the specific versions of the measures employed in the present study. With further development using different raters and preference measures, this approach may expand the evidence base available for modelling preference change for economic analyses from existing data.

Achieving better in-hospital and after-hospital care of patients with acute cardiac disease

In patients hospitalised with acute coronary syndromes (ACS) and congestive heart failure (CHF), evidence suggests opportunities for improving in-hospital and after hospital care, patient self-care, and hospital-community integration. A multidisciplinary quality improvement program was designed and instigated in Brisbane in October 2000 involving 250 clinicians at three teaching hospitals, 1080 general practitioners (GPs) from five Divisions of General Practice, 1594 patients with ACS and 904 patients with CHF. Quality improvement interventions were implemented over 17 months after a 6-month baseline period and included: clinical decision support (clinical practice guidelines, reminders, checklists, clinical pathways); educational interventions (seminars, academic detailing); regular performance feedback; patient self-management strategies; and hospital-community integration (discharge referral summaries; community pharmacist liaison; patient prompts to attend GPs). Using a before-after study design to assess program impact, significantly more program patients compared with historical controls received: ACS: Angiotensin-converting enzyme (ACE) inhibitors and lipid-lowering agents at discharge, aspirin and beta-blockers at 3 months after discharge, inpatient cardiac counselling, and referral to outpatient cardiac rehabilitation. CHF. Assessment for reversible precipitants, use of prophylaxis for deep-venous thrombosis, beta-blockers at discharge, ACE inhibitors at 6 months after discharge, imaging of left ventricular function, and optimal management of blood pressure levels. Risk-adjusted mortality rates at 6 and 12 months decreased, respectively, from 9.8% to 7.4% (P=0.06) and from 13.4% to 10.1% (P= 0.06) for patients with ACS and from 22.8% to 15.2% (P < 0.001) and from 32.8% to 22.4% (P= 0.005) for patients with CHF. Quality improvement programs that feature multifaceted interventions across the continuum of care can change clinical culture, optimise care and improve clinical outcomes.

Direct restorative materials use in Australia in 2002

Background: This study aimed to determine the reasons for dentists' choice of materials, in particular amalgam and resin composite, in Australia. Method: A questionnaire was developed to elicit this information. The names and addresses of 1000 dentists in Australia were selected at random. The questionnaire was mailed to these dentists with an explanatory letter and reply-paid envelope. Results: A total of 560 replies were received. Regarding choice of material, 99 per cent of respondents cited clinical indication as an influencing factor, although patients' aesthetic demands (99 per cent), patients' financial situation (82 per cent), and lecturers' suggestions (72 per cent) were also reported to influence respondents' choice of materials. Twelve per cent of respondents used composite 'always', 29 per cent 'often', 32 per cent 'sometimes', 23 per cent 'seldom' and 4 per cent 'never' in extensive load-bearing cavities in molar teeth. For composite restorations in posterior teeth, 84 per cent 'always', 'often' or 'sometimes' used the total etch technique, 84 per cent used a thick glass-ionomer layer and 36 per cent never used rubber dam. Fifty-nine per cent of respondents reported a decreased use of amalgam over the previous five years. Sixty-eight per cent of respondents agreed with the statement 'discontinuation of amalgam restricts a dentist's ability to adequately treat patients'. Seventy-five per cent considered that the growth in the use of composites increased the total cost of oral health care. Conclusions: Of the respondents from Australia 73 per cent place large composite restorations in molar teeth and their choice of material is influenced greatly by clinical indications, and patients' aesthetic demands.

Audit of consultant physicians' reply letters for referrals to clinics in a tertiary teaching hospital

Background: Doctors referring patients to consultant physicians seek reply letters which both educate and assist in ongoing patient management. Highly desirable attributes in specialist letters include clearly stated and justified: (i) diagnostic formulations, (ii) management regimens, (iii) use of clinical investigations, (iv) prog-nostic statements, (v) contingency plans and (vi) follow-up arrangements. Aim: To explicitly evaluate the quality of reply letters for new patients referred to clinics at a tertiary teaching hospital. Methods: Letters were sampled from outpatient clinics of 10 different medical specialties at Princess Alexandra Hospital in Brisbane, Australia. Reply letters for new patient referrals between 1 August 2000 and 31 October 2000 were retrieved, from which data were abstracted to calculate the proportion of letters satisfying prespecified quality attributes. Results: Of 297 new patient referrals, reply letters were retrieved for 204 (69%). Of these, 147 (72%) referrals were accompanied by a referral letter, mostly (113/147; 77%) from general practitioners. For 120 referrals involving diagnostic issues, 69 (56%) letters stated a diagnostic formulation. Of 114 letters recommending further clinical investigations, 61 (53%) described a rationale for such testing. In 125 cases where therapy was a key issue, 83 (66%) letters recommended changes to current treatment for which reasons were specified in 46 (55%) cases, and contingency plans provided in 13 (16%). Prognosis was mentioned in only 18 (9%) cases. Follow-up arrangements were detailed in 123 (60%) letters. Assessments of patient understanding and likely adherence to therapy were stated in less than 15% of -letters. Conclusions: Opportunities exist for improving quality of consultant physicians' reply letters in terms of greater use of problem lists, contingency plans, prognostic statements and patient-centred assessments, as well as more frequent enunciation of consultants' reasoning behind requests for further tests and changes to current management. Use of structured letter templates may facilitate more consistent inclusion of key information to referring doctors.

Estimating disease likelihood: a case of rubbery figures

In diagnosis and prognosis, we should avoid intuitive “guesstimates” and seek a validated numerical aid

Factors influencing PRN medication use in nursing homes

Objective: To identify determinants of PRN ( as needed) drug use in nursing homes. Decisions about the use of these medications are made expressly by nursing home staff when general medical practitioners (GPs) prescribe medications for PRN use. Method: Cross-sectional drug use data were collected during a 7-day window from 13 Australian nursing homes. Information was collected on the size, staffing-mix, number of visiting GPs, number of medication rounds, and mortality rates in each nursing home. Resident specific measures collected included age, gender, length of stay, recent hospitalisation and care needs. Main outcome measures: The number of PRN orders prescribed per resident and the number of PRN doses given per week averaged over the number of PRN medications given at all in the seven-day period. Results: Approximately 35% of medications were prescribed for PRN use. Higher PRN use was found for residents with the lower care needs, recent hospitalisation and more frequent doses of regularly scheduled medications. With increasing length of stay, PRN medication orders initially increased then declined but the number of doses given declined from admission. While some resident-specific characteristics did influence PRN drug use, the key determinant for PRN medication orders was the specific nursing home in which a resident lived. Resident age and gender were not determinants of PRN drug use. Conclusion: The determinants of PRN drug use suggest that interventions to optimize PRN medications should target the care of individual residents, prescribing and the nursing home processes and policies that govern PRN drug use.