Attitudes and practices of general practitioners in the diagnosis and management of attention-deficit/hyperactivity disorder

Objective: To assess understanding of, and actual and potential roles in management of attention-deficit/hyperactivity disorder (ADHD) among GPs. Methods: A cross-sectional questionnaire survey of Queensland GPs selected randomly from the Royal Australian College of General Practitioners directory of members was carried out. Main outcome measures were knowledge levels of ADHD, current management practices, referral patterns and self-perceived information and training needs. Results: Three hundred and ninety-nine GPs returned a completed questionnaire (response rate 76%). Roles identified by GPs were: the provisional diagnosis of ADHD and referral to specialist services for confirmation of the diagnosis and initiation of management; assistance with monitoring progress once a management plan was in place; education of the child and their family regarding the disorder; and liaison with the school where necessary. Perceived barriers to increased involvement of GPs were: time and resource constraints of general practice; concerns regarding abuse and addiction liability of prescription stimulants; complex diagnostic issues associated with childhood behavioural problems; and lack of training and education regarding ADHD. Conclusions: General practitioners identify a role for themselves in ADHD care that is largely supportive in nature and involves close liaison with specialist services.

Levene tests of homogeneity of variance for general block and treatment designs

This article develops a weighted least squares version of Levene's test of homogeneity of variance for a general design, available both for univariate and multivariate situations. When the design is balanced, the univariate and two common multivariate test statistics turn out to be proportional to the corresponding ordinary least squares test statistics obtained from an analysis of variance of the absolute values of the standardized mean-based residuals from the original analysis of the data. The constant of proportionality is simply a design-dependent multiplier (which does not necessarily tend to unity). Explicit results are presented for randomized block and Latin square designs and are illustrated for factorial treatment designs and split-plot experiments. The distribution of the univariate test statistic is close to a standard F-distribution, although it can be slightly underdispersed. For a complex design, the test assesses homogeneity of variance across blocks, treatments, or treatment factors and offers an objective interpretation of residual plot.

General practitioner attitudes to case conferences: how can we increase participation and effectiveness?

Objectives: To identify general practitioners' views on the barriers to using case conferencing (as outlined in the Medical Benefits Schedule (MBS) Enhanced Primary Care package) and to develop a set of principles to encourage greater GP participation in case conferences. Design: Qualitative study, involving semistructured questions administered to focus groups of GPs, conducted between April and July 2001 as part of a broader study of case coordination in palliative care. Participants: 29 GPs from urban, regional, and rural areas of Queensland. Principal findings: Many of the GPs' work practices militated against participation in traditionally structured case conferences. GPs thought the range of MBS item numbers should be expanded to cover alternative methods of liaison (eg, phone consultations with other service providers). The onerous bureaucratic processes required to claim reimbursement were an additional disincentive. Conclusions: GPs would probably be more likely to participate in case conferences if they were initiated by specialist services and arranged more flexibly to suit GP work schedules.

How well do general practitioners deliver palliative care? A systematic review

General practitioners (GPs) deliver the majority of palliative care to patients in the last year of life. This article seeks to examine the nature of GP care, perceptions of the GPs themselves and others of that care, the adequacy of palliative care training, issues relating to accessibility of GPs to palliative care patients, and strategies that may be of use in encouraging more effective delivery of palliative care by GPs. Medline and PubMed databases from 1966 to 2000 were searched, and 135 references identified. Sixty-six of these described studies relevant to GP palliative care. GPs value this part of their work. Most of the time, patients appreciate the contribution the GP makes to palliative care particularly if the GP is accessible, takes time to listen, allows patient and carer to ventilate their feelings, and is seen to be making efforts made regarding symptom relief. However, reports from bereaved relatives suggest that palliative care is performed less well in the community than in other settings. GPs express discomfort about their competence to perform palliative care adequately. They tend to miss symptoms which are not treatable by them, or which are less common. However, with appropriate specialist support and facilities, GPs have been shown to deliver sound and effective care. GP comfort working with specialist teams increases with exposure to this form of patient management, as does the understanding of the potential other team members have in contributing to the care of the patient. Formal arrangements engaging GPs to work with specialist teams have been shown to improve functional outcomes, patient satisfaction, improve effective use of resources and improve effective physician behaviour in other areas of medicine. Efforts by specialist services to develop formal involvement of GPs in the care of individual patients, may be an effective method of improving GP palliative care skills and appreciation of the roles specialist services can play.

Modeling of phase equilibrium and vapor adsorption on carbon black based on a combination of a lattice theory and equation of state

A thermodynamic approach is developed in this paper to describe the behavior of a subcritical fluid in the neighborhood of vapor-liquid interface and close to a graphite surface. The fluid is modeled as a system of parallel molecular layers. The Helmholtz free energy of the fluid is expressed as the sum of the intrinsic Helmholtz free energies of separate layers and the potential energy of their mutual interactions calculated by the 10-4 potential. This Helmholtz free energy is described by an equation of state (such as the Bender or Peng-Robinson equation), which allows us a convenient means to obtain the intrinsic Helmholtz free energy of each molecular layer as a function of its two-dimensional density. All molecular layers of the bulk fluid are in mechanical equilibrium corresponding to the minimum of the total potential energy. In the case of adsorption the external potential exerted by the graphite layers is added to the free energy. The state of the interface zone between the liquid and the vapor phases or the state of the adsorbed phase is determined by the minimum of the grand potential. In the case of phase equilibrium the approach leads to the distribution of density and pressure over the transition zone. The interrelation between the collision diameter and the potential well depth was determined by the surface tension. It was shown that the distance between neighboring molecular layers substantially changes in the vapor-liquid transition zone and in the adsorbed phase with loading. The approach is considered in this paper for the case of adsorption of argon and nitrogen on carbon black. In both cases an excellent agreement with the experimental data was achieved without additional assumptions and fitting parameters, except for the fluid-solid potential well depth. The approach has far-reaching consequences and can be readily extended to the model of adsorption in slit pores of carbonaceous materials and to the analysis of multicomponent adsorption systems. (C) 2002 Elsevier Science (USA).

Modeling of gas adsorption equilibrium over a wide range of pressure: A thermodynamic approach based on equation of state

A thermodynamic approach based on the Bender equation of state is suggested for the analysis of supercritical gas adsorption on activated carbons at high pressure. The approach accounts for the equality of the chemical potential in the adsorbed phase and that in the corresponding bulk phase and the distribution of elements of the adsorption volume (EAV) over the potential energy for gas-solid interaction. This scheme is extended to subcritical fluid adsorption and takes into account the phase transition in EAV The method is adapted to gravimetric measurements of mass excess adsorption and has been applied to the adsorption of argon, nitrogen, methane, ethane, carbon dioxide, and helium on activated carbon Norit R I in the temperature range from 25 to 70 C. The distribution function of adsorption volume elements over potentials exhibits overlapping peaks and is consistently reproduced for different gases. It was found that the distribution function changes weakly with temperature, which was confirmed by its comparison with the distribution function obtained by the same method using nitrogen adsorption isotherm at 77 K. It was shown that parameters such as pore volume and skeleton density can be determined directly from adsorption measurements, while the conventional approach of helium expansion at room temperature can lead to erroneous results due to the adsorption of helium in small pores of activated carbon. The approach is a convenient tool for analysis and correlation of excess adsorption isotherms over a wide range of pressure and temperature. This approach can be readily extended to the analysis of multicomponent adsorption systems. (C) 2002 Elsevier Science (USA).

Mixed gas equilibrium adsorption on zeolites and energetic heterogeneity of adsorption volume

A model for binary mixture adsorption accounting for energetic heterogeneity and intermolecular interactions is proposed in this paper. The model is based on statistical thermodynamics, and it is able to describe molecular rearrangement of a mixture in a nonuniform adsorption field inside a cavity. The Helmholtz free energy obtained in the framework of this approach has upper and lower limits, which define a permissible range in which all possible solutions will be found. One limit corresponds to a completely chaotic distribution of molecules within a cavity, while the other corresponds to a maximum ordered molecular structure. Comparison of the nearly ideal O-2-N-2-zeolite NaX system at ambient temperature with the system Of O-2-N-2-zeolite CaX at 144 K has shown that a decrease of temperature leads to a molecular rearrangement in the cavity volume, which results from the difference in the fluid-solid interactions. The model is able to describe this behavior and therefore allows predicting mixture adsorption more accurately compared to those assuming energetic uniformity of the adsorption volume. Another feature of the model is its ability to correctly describe the negative deviations from Raoult's law exhibited by the O-2-N-2-CaX system at 144 K. Analysis of the highly nonideal CO2-C2H6-zeolite NaX system has shown that the spatial molecular rearrangement in separate cavities is induced by not only the ion-quadrupole interaction of the CO2 molecule but also the significant difference in molecular size and the difference between the intermolecular interactions of molecules of the same species and those of molecules of different species. This leads to the highly ordered structure of this system.

Identification of research to improve the efficiency of breeding strategies for white clover in Australia - a review

A major challenge faced by today's white clover breeder is how to manage resources within a breeding program. It is essential to utilise these resources with sufficient flexibility to build on past progress from conventional breeding strategies, but also take advantage of emerging opportunities from molecular breeding tools such as molecular markers and transformation. It is timely to review white clover breeding strategies. This background can then be used as a foundation for considering how to continue conventional plant improvement activities and complement them with molecular breeding opportunities. In this review, conventional white clover breeding strategies relevant to the Australian dryland target population environments are considered. Attention is given to: (i) availability of genetic variation, (ii) characterisation of germplasm collections, (iii) quantitative models for estimation of heritability, (iv) the role of multi-environment trials to accommodate genotype-by-environment interactions, (v) interdisciplinary research to understand adaptation to dryland environments, (vi) breeding and selection strategies, and (vii) cultivar structure. Current achievements in biotechnology with specific reference to white clover breeding in Australia are considered, and computer modelling of breeding programs is discussed as a useful integrative tool for the joint evaluation of conventional and molecular breeding strategies and optimisation of resource use in breeding programs. Four areas are identified as future research priorities: (i) capturing the potential genetic diversity among introduced accessions and ecotypes that are adapted to key constraints such as summer moisture stress and the use of molecular markers to assess the genetic diversity, (ii) understanding the underlying physiological/morphological root and shoot mechanisms involved in water use efficiency of white clover, with the objective of identifying appropriate selection criteria, (iii) estimation of quantitative genetic parameters of important morphological/physiological attributes to enable prediction of response to selection in target environments, and (iv) modelling white clover breeding strategies to evaluate the opportunities for integration of molecular breeding strategies with conventional breeding programs.