Gel electrolytes based on lithium macro-anion salt

Montmorillonites are composed of aluminosilicate layers stacked one above the other, and the layer thickness is approximately 1 nm. In this work lithium modified montmorillonite (Li-MMT) was prepared and used as a lithium macro-anion salt in gel electrolytes. It was found that Li-MMT exhibited good compatibility with poly(ethylene glycol), DMSO and the ionic liquid, 1-ethyl-3-methylimidazolium dicyanamide (EMIdca), and a few of novel gel electrolytes based on Li-MMT were obtained. These gel electrolytes were investigated by X-ray powder diffraction, solid state NMR, conductivity measurements and cyclic voltammetry. High conductivities up to 10^{− 4} to 10^{− 3} S/cm at room temperature were observed with these macro-anion gel electrolytes. These gel materials were promising to be used as lithium conductive electrolytes in electrochemical devices, such as lithium batteries.

Platinum electrodeposition for polymer electrolyte membrane fuel cells

A novel electrodeposition technique for preparing the catalyst layer in polymer electrolyte membrane fuel cells has been designed, which may enable an increase in the level of platinum utilisation currently achieved in these systems. This method consists of a two-step procedure involving the impregnation of platinum ions into a preformed catalyst layer (via an ion-exchange into the Nafion polymer electrolyte), followed by a potentiostatic reduction. The concentration of Nafion within the catalyst layer was found to have a significant bearing on the size of the platinum deposits. The preparation of catalyst layers containing a desired platinum loading should also be possible using this method. Surface areas of the platinum deposits were determined using cyclic voltammetry. The prepared catalyst was compared with a conventional electrode made from E-TEK Pt/C. Scanning electron microscopy was used to investigate the dispersion of the platinum particles. Platinum loadings were determined quantitatively by atomic absorption spectroscopy.

Polymer-in-ionic-liquid electrolytes

In order to achieve high conductivity in a polymer electrolyte, polymer-in-ionic-liquid electrolytes have been explored. It is found in this study that poly[vinylpyrrolidone-co-(vinyl acetate)] (P(VP-c-VA)) in 1-ethyl-3-methylimidazolium bis(trifluoromethyl sulfonyl) amide (EtMeIm+Tf2N−) and poly(N,N-dimethyl acrylamide) (PDMAA) in trimethyl butyl ammonium bis(trifluoromethane sulfonyl) amide (N1114+Tf2N−) produce ion-conducting liquids and gels. The P(VP-c-VA)/ EtMeIm+Tf2N− mixture has a conductivity around 10−3 S · cm−1 at 22 °C, for copolymer concentrations up to 30 wt.-%. Thermal analysis shows that the Tg of the P(VP-c-VA)/ EtMeIm+Tf2N− system is well described by the Fox equation as a function of polymer content. Poly(methyl methacrylate) (PMMA)/ EtMeIm+Tf2N− gel electrolytes were prepared by in-situ polymerisation of the monomer in the ionic liquid. In the presence of 0.5–2.0 wt.-% of a crosslinking agent, these PMMA-based electrolytes displayed elastomeric properties and high conductivity (ca. 10−3 S · cm−1) at room temperature.

Polyelectrolyte-in-ionic-liquid electrolytes

Novel polymer electrolyte materials based on a polyelectrolyte-in-ionic-liquid principle are described. A combination of a lithium 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPSLi) and N,N′-dimethylacrylamide (DMMA) are miscible with the ionic liquid, 1-ethyl-3-methylimidazolium dicyanamide (EMIDCA). EMIDCA has remarkably high conductivity (≥ 2 · 10−2 S · cm−1) at room temperature and acts as a good solvating medium for the polyelectrolyte. At compositions of AMPSLi less than or equal to 75 mol-% in the copolymer (P(AMPSLi-co-DMAA)), the polyelectrolytes in EMIDCA are homogeneous, flexible elastomeric gel materials at 10 − 15 wt.-% of total polyelectrolyte. Conductivities higher than 8 · 10−3 S · cm−1 at 30 °C have been achieved. The effects of the monomer composition, polyelectrolyte concentration, temperature and lithium concentration on the ionic conductivity have been studied using thermal and conductivity analysis, and pulsed field gradient nuclear magnetic resonance techniques.

Potential application of solid electrolyte P11 OH in Ni/MH batteries

N,N-Dimethylpyrrolidoium hydroxide (P11 OH) with polymer poly(tetramethyl ammonium acrylate) (PTMA) was investigated as an electrolyte in Ni/MH cells in this work. The efficiency and the performance of the electrolyte was discussed and elucidated with the performance of the cell. Their electrochemical characteristics had been investigated at different temperatures (25 °C and 50 °C) and different discharge current (15 mA g⁻¹ and 30 mA g⁻¹). The results show that the cell with electrolyte polymer-P11OH is dischargeable at these two temperatures, and a discharge capacity of 142 mAh g⁻¹ at 25 °C has been obtained.

Ambient temperature plastic crystal electrolyte for efficient, all-solid-state dye-sensitized solar cell

Doping the molecular plastic crystal of succinonitrile with solid N-methyl-N-butylpyrrolidinium iodide salt and iodine has produced a highly conductive solid iodide/triiodide conductor. Furthermore, it was employed for a highly efficient, all-solid-state dye-sensitized solar cell.

A new Lewis-base ionic liquid comprising a mono-charged diamine structure : a highly stable electrolyte for lithium electrochemistry

A new Lewis-base ionic liquid (IL) based on mono-charged 1,4-diazabicyclo[2.2.2]octane (dabco) was synthesized and its thermal and electrochemical behaviour was characterized. The dabco-based IL with bis(trifluoromethanesulfonyl)amide (TFSA) anion melts at 76 °C when the N-substituted alkyl chain length is 2. The dabco-based IL showed a wide electrochemical window of over 4 V ranging from −3.5 to +1.5 V vs. Fc/Fc⁺ and was able to deposit and strip lithium from a nickel substrate at reasonable efficiency.

Aggregation, ageing and transport properties of surface modified fumed silica dispersions

We have investigated the aggregation, ageing and transport properties of surface modified silica dispersions in DMSO by photon correlation spectroscopy and conductivity measurements. The surface modification introduces Li+-ions that dissociate in the dispersion creating a single Li+-ion conducting electrolyte. We show that the surface modification changes the aggregation and ageing properties of the material. There is a pronounced ageing observed for the modified silica dispersions. At high concentrations of fumed silica a gel state is found, which in the case of the surface modified silica is a very weak gel that can be rejuvenated by ultrasonic treatment. The key parameter controlling the aggregation in this system is hydrogen bonding and the surface modification results in a very low number of sites for hydrogen bonding. In addition there is a contribution from repulsive electrostatic interactions in the surface modified silica dispersions due to the highly charged surfaces of these particles. Furthermore, the Li+-ion diffusion, at low silica concentration, is three orders of magnitude faster than that of the silica particles and in the gel state the silica particles are immobile. We also find that the Li+-ion diffusion is virtually independent of the silica concentration in the dispersions.

Ionic liquid electrolyte porphyrin dye sensitised solar cells

Ionic liquid electrolytes based on a number of imidazolium, quaternary ammonium and phosphonium cations have been developed for porphyrin dye sensitised solar cells yielding efficiencies of up to 5.2% at 0.68 Sun.

Superhydrophobic fabrics from hybrid silica sol-gel coatings: Structural effect of precursors on wettability and washing durability

Particle-containing silica sol was synthesized by co-hydrolysis and co-condensation of two silane precursors, tetraethylorthosilicate (TEOS) and an organic silane composed of a non-hydrolyzable functional group (e.g., alkyl, flourinated alkyl, and phenyl), and used to produce superhydrophobic coatings on fabrics. it has been revealed that the non-hydrolyzable functional groups in the organic silanes have a considerable influence on the fabric surface wettability. When the functional group was long chain alkyl (C16), phenyl, or flourinated alkyl (C8), the treated surfaces were highly superhydrophobic with a water contact angle (CA) greater than 170°, and the CA value was little affected by the fabric type. The washing durability of the superhydrophobic coating was improved by introducing the third silane containg epoxide group, 3-glycidoxypropyltrimethoxsilane (GPTMS), for synthesis. Although the presence of epoxide groups in the coating slightly reduced the fabrics' superhydrophobicity, the washing durability was considerably improved when polyester and cotton fabrics were used as substrates.

A gel-capture assay for characterizing the sialyl-glycan selectivity of influenza viruses

Sialic acids (SA) usually linked to galactose (Gal) in an α2,6- or α2,3-configuration are considered the main cell receptors for influenza viruses, in particular for their hemagglutinins (HA). The typing of influenza virus HA receptor selectivity is relevant for understanding the transmissibility of avian and swine viruses to the human population. In this study we developed a simple and inexpensive gel-capture assay (GCA) of the influenza virus HA receptor-binding selectivity. Its principle is the binding of soluble influenza virus to pentasaccharide analogs, representatives of receptors of human and avian influenza viruses, immobilized on a gel resin. The human and avian analogs consisted of a sialyllactose-N-tetraose c (LSTc) [Neu5Ac(α2,6)Gal(β1-3)GlcNAc(β1-3)Gal(β1-4)Glc] and a sialyllactose-N-tetraose a (LSTa) [Neu5Ac(α2,3)Gal(β1-3)GlcNAc(β1-3)Gal(β1-4)Glc], respectively. Following equilibration, the unbound virus is washed away and the bound one is assayed via HA by densitometry as a function of the analog concentration. Using GCA, the receptor selectivity of three influenza viruses of different HA subtype was investigated. The results showed that the egg-adapted A/California/07/2009 (H1N1) virus exhibited an avian α2,3-linked LSTa selectivity, however, it retained the ability to bind to the α2,6-linked LSTc human receptor analog. Influenza B virus B/Florida/4/2006 showed α2,6-linked LSTc selectivity and a poor α2,3-linked LSTa avidity. The H3N2 virus A/Wisconsin/15/2009 displayed almost comparable avidity for both receptor analogs with a marginally greater α2,3-linked LSTa avidity. The described assay protocol provides a simple and rapid method for the characterization of influenza virus HA receptor binding selectivity. Keywords: influenza virus; hemagglutinin; receptor; sialyllactose-N-tetraose; gel-capture assay.

Photochromic wool fabric by sol-gel coating and photochromism

The application of photochromism in textiles has potential to create new opportunities to develop fancy colour-changing effects in fashionable textiles, as well as smart garments capable of protecting wearers from the effects of UV irradiation and responding to environmental changes. This book presents a coating method for achieving quick and obvious photochromic effects on wool fabrics using conventional photochromic dyes and hybrid silicas. It covers details about fabricating different types of photochromic dye-silica coatings, measuring their optical performance, assessing some physical characterisations of the coatings, and measuring the effects of the coatings on fabric performance.

Ionic liquid electrolyte for lithium metal batteries : physical, electrochemical, and interfacial studies of N-Methyl-N-butylmorpholinium Bis(fluorosulfonyl)imide

The ionic liquid (IL) N-methyl-N-butylmorpholinium bis(fluorosulfonyl)imide (C₄mmor FSI) is examined from physical and electrochemical perspectives. Pulsed field gradient NMR spectroscopy shows that ion diffusivities are low compared with similar, non-ethereal ILs. Ionicity values indicate that above room temperature, less than 50% of ions contribute to conductivity.

Lithium cycling in symmetrical cells using a C₄mmor FSI-based electrolyte is best demonstrated at elevated temperatures. Specific capacities of 130 mAh g⁻¹ are achieved in a Li−LiFePO₄ battery at 85 °C. FT-IR spectroscopic investigations of lithium electrodes suggest the presence of alkoxide species in the solid electrolyte interphase (SEI), implying a ring-opening reaction of C₄mmor with lithium metal. In contrast, the SEI derived from N-methyl-N-propylpiperidinium FSI lacks the alkoxide signature but shows signs of alkyl unsaturation, and the activation energy for Li+ transport through this SEI is slightly lower than that for the C₄mmor-derived SEI. Our detailed findings give insight into the capabilities and limitations of rechargeable lithium metal batteries utilizing a C₄mmor FSI electrolyte.