Development of a low-Reynolds-number k-ω model for FENE-P fluids

A low-Reynolds-number k-ω model for Newtonian fluids has been developed to predict drag reduction of viscoelastic fluids described by the FENE-P model. The model is an extension to viscoelastic fluids of the model for Newtonian fluids developed by Bredberg et al. (Int J Heat Fluid Flow 23:731-743, 2002). The performance of the model was assessed using results from direct numerical simulations for fully developed turbulent channel flow of FENE-P fluids. It should only be used for drag reductions of up to 50 % (low and intermediate drag reductions), because of the limiting assumption of turbulence isotropy leading to an under-prediction of k, but compares favourably with results from k-ε models in the literature based on turbulence isotropy. © 2012 Springer Science+Business Media Dordrecht.

Strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem

This paper proposes strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem (TEP). The concept of the binary numeral system (BNS) is used to reduce the number of binary and continuous variables related to the candidate transmission lines and network constraints that are connected with them. The construction phase of greedy randomized adaptive search procedure (GRASP-CP) and additional constraints, obtained from power flow equilibrium in an electric power system are employed for more reduction in search space. The multistage TEP problem is modeled like a mixed binary linear programming problem and solved using a commercial solver with a low computational time. The results of one test system and two real systems are presented in order to show the efficiency of the proposed solution technique. © 1969-2012 IEEE.

Effect of the number of screws on the stability of locking mandibular reconstruction plates

Atrophic mandible fractures are frequently a challenge to stabilize. This study evaluated, through mechanical testing in vitro, the number of locking screws that is sufficient to withstand loading when applied with a locking reconstruction plate in the fixation of atrophic mandible fractures. Polyurethane mandibles with a simulated linear fracture at the midline were used as substratum. Results show that resistance of the fixation is poor when one and two screws are used on each side of the fracture. Three screws on each side of the fracture significantly increases the resistance to displacement. However, no additional strength is added to the construct when more than three screws per side are used. © 2013 International Association of Oral and Maxillofacial Surgeons.

Correlation of previous experience, patient expectation and the number of post-delivery adjustments of complete dentures with patient satisfaction in a Brazilian population

A number of variables may influence the outcome of complete denture therapy. The objective of this study was to verify possible correlations between previous experience with dentures, patient expectation and the number of post-delivery adjustments with patient satisfaction after treatment. One hundred patients (mean age 61·9 ± 10·3) rated their previous experiences with complete dentures and their expectations before and satisfaction after treatment on a visual analogue scale (VAS) using scores from 0 (worst results) to 10 (best results). The number of post-delivery adjustments and other patient-related clinical variables was also noted. Patient expectation scores were higher than previous experience scores and satisfaction after treatment scores. Positive and weak correlations were found between previous chewing experiences with complete dentures, with regard to chewing expectations and comfort of use. Phonetics and comfort of use in previous experiences presented a positive correlation with expectations for chewing, aesthetics, phonetics and comfort of use. Groups of patients with different levels of education presented significant differences in expectation scores regarding comfort of use as well. A negative and weak correlation was found between phonetics satisfaction and the number of post-delivery adjustments. Patients' expectations for the therapy were higher than their satisfaction after treatment. Previous experiences with complete dentures could slightly influence patients' expectations and satisfaction, whereas lower scores for previous experience with complete dentures caused lower scores for both expectation and satisfaction. Patients' educational levels and the number of post-delivery adjustments influenced negatively the expectations about comfort of use and patient satisfaction, respectively. © 2013 John Wiley & Sons Ltd.

Carbohydrate use and reduction in number of balance beam falls: Implications for mental and physical fatigue

Background: Artistic Gymnastics is a sport where athletes are frequently fatigued. One element that might influence this aspect is carbohydrate, an important energy substrate for the muscles and the CNS. Our goal was to investigate the influence of fatigue over artistic gymnastics athlete's performance and the effects of a carbohydrate supplementation on their performance. Methods: We evaluated 15 athletes divided in 2 groups (control and fatigue) from 12 to 14 years old in two different experimental days. On the first day (water day), they did 5 sets of exercises on the balance beam (experimental protocol) ingesting only water, CG (control group) warmed up before the experimental protocol and FG (fatigue group) did a fatigue circuit, warm up exercises and then the experimental protocol. On the second day (carbohydrate day), we used the same protocol but CG ingested a sugar free flavored juice and FG ingested a 20% concentration maltodextrin solution before the protocol on the balance beam. Results: We observed a greater number of falls from the balance beam from the FG on the first day (5.40 ± 1.14 FG vs 3.33 ± 1.37 CG; p = 0.024) and a decrease in the number of falls on the second day (2.29 ± 1.25 FG water day vs 5.40 ± 1.14 FG carbohydrate day; p = 0.0013). Carbohydrate solution was able to supply muscle demands and improve the athlete's focus showed by the reduced number of falls. © 2013 Batatinha et al.; licensee BioMed Central Ltd.

Chromosomal diversification of diploid number, heterochromatin and rDNAs in two species of Phanaeus beetles (Scarabaeidae, Scarabaeinae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Number of Bleaching Sessions Influences Pulp Tissue Damage in Rat Teeth

Introduction: Hydrogen peroxide tooth bleaching is claimed to cause alterations in dental tissue structures. This study investigated the influence of the number of bleaching sessions on pulp tissue in rats. Methods: Male Wistar rats were studied in 5 groups (groups 1S-5S) of 10 each, which differed by the number (1-5) of bleaching sessions. In each session, the animals were anesthetized, and 35% hydrogen peroxide gel was applied to 3 upper right molars. Two days after the experimental period, the animals were killed, and their jaws were processed for light microscope evaluation. Pulp tissue reactions were scored as follows: 1, no or few inflammatory cells and no reaction; 2, <25 cells and a mild reaction; 3, between 25 and 125 cells and a moderate reaction; and 4, 125 or more cells and a severe reaction. Results from each experimental group were compared between groups and within groups to the corresponding unbleached upper left molars and analyzed for significant differences using the Kruskal-Wallis test (P < .05). Results: All tissue sections showed significant bleaching-induced changes in the dental pulp. After 1 bleaching session, necrotic tissue in the pulp horns and underlying inflammatory changes were observed. The extent and intensity of these changes increased with the number of bleaching sessions. After 5 sessions, the changes included necrotic areas in the pulp tissue involving the second third of the radicular pulp and intense inflammation in the apical third. Conclusions: The number of bleaching sessions directly influenced the extent of pulp damage. © 2013 American Association of Endodontists.

A new number field construction of the lattice E8

Known number theoretical constructions of the lattice E8 use the cyclotomic fields Q(ζ15), Q(ζ20), and Q(ζ24). In this work, an infinite family of Abelian number fields yielding rotated versions of the lattice E 8 is exhibited. © 2012 The Managing Editors.

El régimen de salarios y su influencia en la selección de la mano de obra rural: estudio de algunas comunas rurales de la periferia de la ciudad de Santiago = Wage structure and its influence on the selection of rural labour: survey of a number of rural communes in the Santiago areas

Los documentos del Seminario fueron publicados por UNESCO en 1961 con el título: La urbanización en América Latina/Urbanization in Latin America

Inversão de dados sísmicos de reflexão a partir da curva do tempo de trânsito

A presente Dissertação de Mestrado tem como objetivo o estudo do problema de inversão sísmica baseada em refletores planos para arranjo fonte-comum (FC) e ponto-médiocomum (PMC). O modelo direto é descrito por camadas homogêneas, isotrópicas com interfaces plano-horizontais. O problema é relacionado ao empilhamento NMO baseado na otimização da função semblance, para seções PMC corrigidas de sobretempo normal (NMO). O estudo foi baseado em dois princípios. O primeiro princípio adotado foi de combinar dois grupos de métodos de inversão: um Método Global e um Método Local. O segundo princípio adotado foi o de cascata, segundo a teoria Wichert-Herglotz-Bateman, que estabelece que para conhecer uma camada inferior tem-se que conhecer primeiro a camada superior (dissecação). A aplicação do estudo é voltada à simulação sísmica de Bacia Sedimentar do Solimões e de Bacia Marinha para se obter uma distribuição local 1D de velocidades e espessuras para a subsuperfície em horizontes alvo. Sendo assim, limitamos a inversão entre 4 e 11 refletores, uma vez que na prática a indústria limita uma interpretação realizada apenas em número equivalente de 3 a 4 refletores principais. Ressalta-se que este modelo é aplicável como condição inicial ao imageamento de seções sísmicas em regiões geologicamente complexas com variação horizontal suave de velocidades. Os dados sintéticos foram gerados a partir dos modelos relacionados a informações geológicas, o que corresponde a uma forte informação a priori no modelo de inversão. Para a construção dos modelos relacionados aos projetos da Rede Risco Exploratório (FINEP) e de formação de recursos humanos da ANP em andamento, analisamos os seguintes assuntos relevantes: (1) Geologia de bacias sedimentares terrestre dos Solimões e ma rinha (estratigráfica, estrutural, tectônica e petrolífera); (2) Física da resolução vertical e horizontal; e (3) Discretização temporal-espacial no cubo de multi-cobertura. O processo de inversão é dependente do efeito da discretização tempo-espacial do campo de ondas, dos parâmetros físicos do levantamento sísmico, e da posterior reamostragem no cubo de cobertura múltipla. O modelo direto empregado corresponde ao caso do operador do empilhamento NMO (1D), considerando uma topografia de observação plana. O critério básico tomado como referência para a inversão e o ajuste de curvas é a norma 2 (quadrática). A inversão usando o presente modelo simples é computacionalmente atrativa por ser rápida, e conveniente por permitir que vários outros recursos possam ser incluídos com interpretação física lógica; por exemplo, a Zona de Fresnel Projetada (ZFP), cálculo direto da divergência esférica, inversão Dix, inversão linear por reparametrização, informações a priori, regularização. A ZFP mostra ser um conceito út il para estabelecer a abertura da janela espacial da inversão na seção tempo-distância, e representa a influência dos dados na resolução horizontal. A estimativa da ZFP indica uma abertura mínima com base num modelo adotado, e atualizável. A divergência esférica é uma função suave, e tem base física para ser usada na definição da matriz ponderação dos dados em métodos de inversão tomográfica. A necessidade de robustez na inversão pode ser analisada em seções sísmicas (FC, PMC) submetida a filtragens (freqüências de cantos: 5;15;75;85; banda-passante trapezoidal), onde se pode identificar, comparar e interpretar as informações contidas. A partir das seções, concluímos que os dados são contaminados com pontos isolados, o que propõe métodos na classe dos considerados robustos, tendo-se como referência a norma 2 (quadrados- mínimos) de ajuste de curvas. Os algoritmos foram desenvolvidos na linguagem de programação FORTRAN 90/95, usando o programa MATLAB para apresentação de resultados, e o sistema CWP/SU para modelagem sísmica sintética, marcação de eventos e apresentação de resultados.

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Search for baryon number violation in top-quark decays

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Releasing number of Telenomus remus (Nixon) (Hymenoptera: Platygastridae) against Spodoptera frugiperda Smith (Lepidoptera: Noctuidae) in corn, cotton and soybean

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The conservation of number and location of 18S sites indicates the relative stability of rDNA in species of Pentatomomorpha (Heteroptera)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

RIEMANN ZETA ZEROS AND PRIME NUMBER SPECTRA IN QUANTUM FIELD THEORY

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)