Codisposição de resíduos sólidos de serviços de saúde com resíduos sólidos urbanos

O objetivo deste trabalho é estudar a codisposição de resíduos sólidos de serviços de saúde (RSSS) com resíduos sólidos urbanos (RSU), dando ênfase aos microrganismos normalmente encontrados nos RSSS. O trabalho foi desenvolvido em três etapas, julgadas relevantes para o entendimento da codisposição de RSSS com RSU, denominadas de forma geral: Codisposição, Recirculação e Inoculação. A Codisposição foi implementada a partir da montagem de seis células de 70 m3, portanto em escala real, escavadas sobre a Célula 4 do Aterro Sanitário Zona Norte, na cidade de Porto Alegre. As células experimentais foram dispostas lado a lado, apresentando base inferior 2 x 3 m, base superior 7 x 8 m e profundidade 2,5 m. Cada célula recebeu, nesta ordem, cobertura de BIDIM 400, PEAD 2 mm e BIDIM 180. As duas coberturas de BIDIM funcionaram como membranas protetoras da manta de PEAD (impermeabilizante), visando minorar possíveis danos mecânicos determinados principalmente por elementos pérfuro-cortantes. As drenagens dos efluentes líquidos e gasosos de cada célula foram realizadas através de tubos hidráulicos de DN 40 mm, possuindo estes comunicação entre si no interior de cada célula, mas não entre células. Os tubos de saída de gás e lixiviado foram furados em sua superfície para garantir a remoção dos efluentes do interior das células, sendo forrados com BIDIM 400 nas regiões perfuradas para impedir a obstrução dos furos pelo resíduo. As células foram denominadas C1, C2, C3, C4, C5 e C6, diferindo entre si devido às relações de RSSS/RSU que foram utilizadas em seu preenchimento. De C1 a C6, as percentagens de RSU e RSSS foram, respectivamente, (100% e 0%), (95% e 5%), (75% e 25%), (50% e 50%), (25% e 75%) e (0% e 100%). Depois de preenchidas, as células receberam uma camada de argila compactável de 60 cm. Foram analisadas diversas variáveis físicas, químicas e microbiológicas de controle. Na etapa de Recirculação, estudou-se a influência da reposição de todo o lixiviado gerado em uma célula sobre a argila de recobrimento desta mesma célula. Foi estudado ainda o Poder Germinativo de quatro espécies vegetais das quais uma delas viria a ser utilizada para remoção de poluentes do lixiviado recirculado, sendo plantada sobre a superfície superior das células. Foram elas ervilhaca (Vicia sativa), aveia preta (Avena strigosa), alfafa (Medicago sativa) e pensacola (Paspalum notatum), testadas na presença e ausência de lixiviado;. Nesta etapa, foi testada a influência da espécie vegetal ervilhaca (Vicia sativa) – leguminosa de inverno –, plantada na argila, como agente de depuração do lixiviado recirculado. Verificou-se que a utilização desta espécie vegetal não teve influência significativa na remoção de poluentes do lixiviado, nas condições do experimento. A redução das concentrações de poluentes se deveu, portanto, à operação de recirculação. Na etapa denominada Inoculação, foram estudadas as curvas de crescimento de três espécies de microrganismos em lixiviado bruto e esterilizado. Foram utilizados reatores de 1,5 L preenchidos com 1 L de lixiviado esterilizado previamente, sendo inoculadas concentrações conhecidas dos microrganismos Escherichia coli, Pseudomonas aeruginosa e Staphylococcus aureus, separadamente. Para cada microrganismo, foram montados doze reatores: quatro com pH 5, quatro com pH 7 e quatro com pH 9. De cada conjunto de reatores de mesmo pH, três foram inoculados com igual concentração de microrganismos, e um, considerado reator de controle, recebeu somente água deionizada e esterilizada. Desenvolveram-se, como esperado, as curvas de crescimento para as espécies estudadas. A espécie Pseudomonas aeruginosa se adaptou melhor (maior tempo de sobrevivência e concentrações mais elevadas) no pH neutro, enquanto que a espécie Escherichia coli se desenvolveu melhor no pH ácido. No pH 9, ambas as espécies foram inviabilizadas desde a primeira contagem. Para Staphylococcus aureus a concentração reduziu-se drasticamente nas primeiras 24 h para todos os valores de pH. Comparando-se os pH, essa espécie se adaptou melhor no pH neutro e depois no pH ácido. A partir dos estudos desenvolvidos, a codisposição de RSSS com RSU se mostrou uma técnica aceitável.

Síntese e caracterização da PEAD obtido via catálise Ziegler-Natta em homo e copolimerização de eteno e 1-buteno

Neste trabalho foram sintetizados e caracterizados polietilenos de alta densidade (PEAD) obtidos via homopolimerização de eteno e copolimerização de eteno com 1-buteno, utilizando-se dois sistemas catalíticos baseados em um catalisador Z-N heterogêneo suportado, sintetizado a partir de TiCl4 e etilato de magnésio, que leva à geração in situ de cloreto de magnésio. O objetivo foi avaliar o efeito do 1-buteno sobre as propriedades do PEAD obtido através do catalisador supracitado e IPRA ou TEA como cocatalisadores (estes sistemas catalíticos foram identificados como ZN1-IPRA e ZN1- TEA). Como esperado, observou-se aumento de atividade catalítica quando 1-buteno foi usado como comonômero, conhecido como “efeito comonômero”. Houve redução da densidade do PEAD com a concentração do comonômero no meio reacional na seguinte ordem: homopolímero > copolímero sintetizado com pressão de 1-C4 de 0,5 bar > copolímero sintetizado com pressão de 1-C4 de 0,9 bar. Esta redução da densidade foi acompanhada de um aumento do MFR, de redução de massa molar e polidispersão, esta última também constatada pelas medidas reológicas em reômetro rotacional. Também constatou-se redução de Tc, Tf, cristalinidade, tensão no escoamento, módulo secante a 2 %, resistência à tração por impacto e ESCR. A razão de inchamento foi maior nos homopolímeros obtidos com ambos os sistemas catalíticos, provavelmente devido à maior polidispersão destas resinas, aliado ao fato de também apresentarem maior massa molar. A deconvolução das curvas de GPC e a caracterização das frações de polímero obtidas através do fracionamento preparativo (PREP) provou a existência de uma maior fração de moléculas com alta massa molar no PEAD obtido com o sistema catalítico ZN1-IPRA. Esta fração permitiu explicar, ao menos em parte, as maiores razões de inchamento e a melhor recuperação no teste de fluência dos polímeros obtidos com este sistema catalítico. Não foi possível identificar diferenças significativas na distribuição do comonômero nas cadeias poliméricas dos copolímeros obtidos com ambos os sistemas catalíticos estudados, somente indícios de incorporação diferenciada através da determinação do teor de metilas totais nas frações obtidas por PREP.

Obtenção de alfa-olefinas em reações de oligomerização do eteno utilizando complexos de níquel em meio homogêneo e bifásico

Neste trabalho são descritos estudos comparativos de reações de oligomerização do etileno utilizando complexos do tipo: Ni-[P^O] e Ni-[Diimina] (na presença de MAO como cocatalisador). A pesquisa foi realizada com o objetivo de verificar e comparar o comportamento dos dois complexos em estudo, quando estes passam do meio homogêneo para o meio bifásico (na presença de um líquido iônico). O líquido iônico utilizado é o tetrafluorborato de 1-butil-3-metilimidazol. Foram avaliados parâmetros reacionais como pressão, temperatura, tempo de reação, velocidade de agitação e volume de líquido iônico para o catalisador Ni-[P^O] nos meios homogêneo e bifásico. Para o precursor Ni-[Diimina], os parâmetros avaliados foram pressão e temperatura nos dois meios. Os produtos obtidos são olefinas lineares e ramificadas, principalmente α-olefinas; com faixa de distribuição de C4 a C20 (Distribuição Shulz-Flowry). As atividades obtidas nos ciclos de reações variam entre 21 h-1 a 32.772 h-1, e os resultados são interpretados envolvendo os mecanismos de reação. Devido as diferenças existentes entre nos complexos em estudo, verifica-se diferentes atividades e diferentes faixas de produtos oligoméricos. O comportamento obtido para cada complexo depende diretamente dos parâmetros reacionais utilizados, além do meio ao qual foram submetidos durante as reações.

Novel catalyst systems based on Ni(II), Ti(IV), and Cr(III) complexes for oligo-and polymerization of ethylene

The complex of Brookhart Ni(α-diimine)Cl2 (1) (α-diimine = 1,4-bis(2,6- diisopropylphenyl)-acenaphthenediimine) has been characterized after impregnation on silica (S1) and MAO-modified silicas (4.0, 8.0 and 23.0 wts.% Al/SiO2 called S2, S3 and S4, respectively). The treatment of these heterogeneous systems with MAO produces some active catalysts for the polymerization of the ethylene. A high catalytic activity has been gotten while using the system supported 1/S3 (196 kg of PE/mol[Ni].h.atm; toluene, Al/Ni = 1000, 30ºC, 60 min and atmospheric pressure of ethylene). The effects of polymerization conditions have been tested with the catalyst supported in S2 and the best catalytic activity has been gotten with solvent hexane, MAO as cocatalyst, molar ratio Al/Ni of 1000 and to the temperature of 30°C (285 kg of PE/mol[Ni].h.atm). When the reaction has been driven according to the in situ methodology, the activity practically doubled and polymers showed some similar properties. Polymers products by the supported catalysts showed the absence of melting fusion, results similar to those gotten with the homogeneous systems by DSC analysis. But then, polymers gotten with the transplanted system present according to the GPC’s curves the polydispersity (MwD) varies between 1.7 and 7.0. A polyethylene blend (BPE/LPE) was prepared using the complex Ni(α-diimine)Cl2 (1) (α-diimine = 1,4-bis(2,6-diisopropylphenyl)-acenaphthenediimine) and {TpMs*}TiCl3 (2) (TpMs* = hydridobis(3-mesitylpyrazol-1-yl)(5-mesitylpyrazol-1-yl)) supported in situ on MAO-modified silica (4.0 wts. -% Al/SiO2, S2). Reactions of polymerization of ethylene have been executed in the toluene in two different temperatures (0 and 30°C), varying the molars fraction of nickel (xNi), and using MAO as external cocatalyst. To all temperatures, the activities show a linear variation tendency with xNi and indicate the absence of the effect synergic between the species of nickel and the titanium. The maximum of activity have been found at 0°C. The melting temperature for the blends of polyethylene produced at 0 °C decrease whereas xNi increases indicating a good compatibility between phases of the polyethylene gotten with the two catalysts. The melting temperature for the blends of polyethylene showed be depend on the order according to which catalysts have been supported on the MAO-modified silica. The initial immobilization of 1 on the support (2/1/S2) product of polymers with a melting temperature (Tm) lower to the one of the polymer gotten when the titanium has been supported inicially (1/2/S2). The observation of polyethylenes gotten with the two systems (2/1/S2 and 1/2/S2) by scanning electron microscopy (SEM) showed the spherical polymer formation showing that the spherical morphology of the support to been reproduced. Are described the synthesis, the characterization and the catalytic properties for the oligomerization of the ethylene of four organometallics compounds of CrIII with ligands ([bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine] chromium (III) chloride (3a), [bis[2-(3,5- dimethyl-l-pyrazolyl)ethyl]benzylamine] chromium (III) chloride (3b), [bis[2-(3,5-dimethyl-lpyrazolyl) ethyl]ether] chromiun(III)chloride (3c), [bis[2-(3-phenyl-lpyrazolyl) ethyl]ether]chromiun(III)chloride (3d)). In relation of the oligomerization, at exception made of the compounds 3a, all complex of the chromium showed be active after activation with MAO and the TOF gotten have one effect differentiated to those formed with CrCl3(thf)3. The coordination of a tridentate ligand on the metallic center doesn't provoke any considerable changes on the formation of the C4 and C6, but the amount of C8 are decrease and the C10 and C12+ have increased. The Polymers produced by the catalyst 3a to 3 and 20 bar of ethylene have, according to analyses by DSC, the temperatures of fusion of 133,8 and 136ºC respectively. It indicates that in the two cases the production of high density polyethylene. The molar mass, gotten by GPC, is 46647 g/mols with MwD = 2,4 (3 bar). The system 3c/MAO showed values of TOF, activity and selectivity to different α-olefins according to the pressure of ethylene uses. Himself that shown a big sensibility to the concentration of ethylene solubilized.

Propriedades antioxidante, anti-hemostástica e antiproliferativa de galactanas sulfatadas da alga vermelha hypnea musciformis (wulfen) j. V. Lamouroux

Marine algae are one of the major sources of biologic compounds. In extracellular matrix of these organisms there are sulfated polysaccharides that functions as structural components and provides protection against dehydration. The fraction 1.0 (F1.0) rich in sulfated galactans obtained from red seaweed Hypnea musciformis was physicochemical characterized and evaluated for pharmacologic activity through antioxidant activity, cytotoxic action on erythrocytes, anticoagulant, stimulatory action under antithrombotic heparan sulfate synthesis and their effects on cell proliferation and cycle cell progression. The main components of F1.0 were carbohydrates (49.70 ± 0.10%) and sulfate (44.59 ± 0.015%), presenting phenolic compounds (4.79 ± 0.016%) and low protein contamination (0.92 ± 0.001%). Fraction 1.0 showed polidisperse profile and signs in infrared analysis in 1262, 1074 and 930, 900 and 850 attributed to sulfate esters S=O bond, presence of a 3,6- anidrogalactose C-O bond, non-sulfated β-D-galactose and a C-O-SO4 bond in galactose C4, respectively. The fraction rich in sulfated galactans exhibited strong antioxidant action under lipid peroxidation assay with IC50 of 0.003 mg/mL. Besides the inhibition of hemolysis induced by H2O2 in erythrocytes treated with F1.0, this fraction did not promote significant cytotoxity under erythrocytes membranes. F1.0 exhibited low anticoagulant activity causing moderate direct inhibition of enzimatic activity of thrombin. This fraction promoted stimulation around of 4.6 times on this synthesis of heparan sulfate (HS) by rabbit aortic endothelial cells (RAEC) in culture when was compared with non treated cells. The fraction of this algae displayed antiproliferative action under RAEC cells causing incresing on cell number on S fase, blocking the cycle cell progression. Thus F1.0 presented cytostatic and no cytotoxic action under this cell lineage. These results suggest that F1.0 from H. musciformis have antioxidant potential which is a great effect for a compound used as food and in food industry which could be an alternative to food industry to prevent quality decay of lipid containing food due to lipid peroxidation. These polysaccharides prevent the lipid peroxidation once the fraction in study exhibited strong inhibitory action of this process. Furthermore that F1.0 present strong antithrombotic action promoting the stimulation of antithrombotic HS synthesis by endothelial cells, being important for thrombosis preventing, by its inhibitory action under reactive oxygen species (ROS) in some in vitro methods, being involved in promotion of hypercoagulability state.

Ação de polissacarídeos sulfatados de Fucus Vesiculosus na Hemostasia e no sistema complemento

Fucans are a family of sulfated homo and teropolysaccharides respectively, composed mainly of a- (1®2) and a- (1®3) linked by L-fucose residues. Properties such as the ability to act as an anti-contraceptive, to reduce cholesterol levels, and to act as an anti-tumor agent are much related. We have focused our attention on the anticoagulant properties, platelet aggregation, hemorrhagic activity and complement system in vitro of commercial fucoidan (F) and their purified fractions (F1, F2 and F3) from Fucus vesiculosus obtained from fractionation of the fucoidan with different concentrations of acetone 1, 2 and 3v. These compounds were chemically characterized and the fucoidan (F) was modified by desulfation. The anticoagulant activity of the compounds was assessment by activated partial thromboplastin time (APTT) and prothrombine time assay (PT) using citrated normal human plasma. The results of APPT test showed that F, F1 and F2 have high anticoagulants activities 240.0 s (5 µg). The F3 showed 73.7 s in the same concentrations. The results obtained with PT test to F, F1, F2 and F3 were 81.5 s, 120.0 s, 57.1 and 32.5 s respectively with 50 µg. The dessulfated polymer showed a decrease in the anticoagulant activity in these two tests. Platelet aggregation assay was measured turbidimetrically with platelet aggregometer by method of Born. The aggregation platelet with F and fractions F1, F2 and F3 exhibited a two-phase answer in the concentration of 5 mg/mL with maximum aggregation of 76.36 ± 10.3% ; 69.54 ± 9.40%; 75.94 ± 9.01%; 51.13 ± 9.59% respectively. However, was observed a hipoaggregate profile F (15.17 ± 5.2%), F1 (7.40 ± 3.04 %), F2 (19.1 ± 5.41%) and F3 (5.09 ± 3.02%) at 0.1 mg/mL. The hemorrhagic activity assay was carried in Wistar rats and showed that these compounds have low hemorrhagic effect when compared to heparin. The complement system ( alternative pathway was made using non-sensibilized rabbit red blood cells The results of complement system essay showed that F , F2 and F3 have action inhibitory in relation to the group control 0.544, 0.697, 0.622 and 0.958 respectively The results showed that these compounds have action on this system. Interaction of the polisaccharides with proteins C3 and C4 showed that the fraction F1 stimulated the activity assay hemolytic using red blood cells

Caracterização estrutural e avaliação das atividades farmacológicas da fucana B extraída da alga Dictyota menstrualis

Seaweeds are a major source of biologically active compounds . In the extracellular matrix of these organisms are sulfated polysaccharides that functions as structural components preventing it against dehydration. The fraction 0.9 (FucB) rich in sulfated fucans obtained from brown seaweed Dictyota menstrualis was chemical characterized and evaluated for pharmacological activity by testing anticoagulant activity, stimulatory action on the synthesis of an antithrombotic heparan sulfate, antioxidant activity and its effects in cell proliferation. The main components were FucB carbohydrates (49.80 ± 0.10 %) and sulfate (42.30 ± 0.015 %), with phenolic compounds ( 3.86 ± 0.016 %) and low protein contamination ( 0.58 ± 0.001 % ) . FucB showed polydisperse profile and analysis of signals in the infrared at 1262, 1074 and 930 cm -1 and 840 assigned to S = O bonds sulfate esters , CO bond presence of 3,6- anhydrogalactose , β -D- galactose non- sulfated sulfate and the axial position of fucose C4 , respectively. FucB exhibited moderate anticoagulant activity , the polysaccharides prolonged time (aPTT ) 200 ug ( > 90s ) partial thromboplastin FucB no effect on prothrombin time (PT), which corresponds to the extrinsic pathway of coagulation was observed. This stimulation promoted fraction of about 3.6 times the synthesis of heparan sulfate (HS) by endothelial cells of the rabbit aorta ( RAEC ) in culture compared with cells not treated with FucB . This has also been shown to compete for the binding site with heparin. The rich fraction sulfated fucans exhibited strong antioxidant activity assays on total antioxidant (109.7 and 89.5 % compared with BHT and ascorbic acid standards ) , reducing power ( 71 % compared to ascorbic acid ) and ferric chelation ( 71 , comparing with 5 % ascorbic acid). The fraction of algae showed cytostatic activity on the RAEC cells revealed that the increase of the synthesis of heparan sulfate is not related to proliferation. FucB showed antiproliferative action on cell lines modified as Hela and Hep G2 by MTT assay . These results suggest that FucB Dictyota menstrualis have anticoagulant , antithrombotic , antioxidant potential as well as a possible antitumor action, promoting the stimulation of the synthesis of antithrombotic HS by endothelial cells and is useful in the prevention of thrombosis, also due to its inhibitory action on species reactive oxygen ( ROS ) in some in vitro systems , being involved in promoting a hypercoagulable state

Uso da glicerina oriunda da síntese do biodiesel em sistemas microemulsionados visando aplicação de herbicidas

The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant

Efeito antitrombótico de uma fucana não anticoagulante extraída da alga Spatoglossum Schröederi

Fucan is a term used to denominate a family of sulfated L-fucose-rich polysaccharides. The brown alga Spatoglossum schröederi (Dictyotaceae) has three heterofucans namely fucan A, B and C. The 21 kDa fucan A is composed of a core of β (1-3) glucuronic acid-containing oligosaccharide of 4.5 kDa with branches at C4 of fucose chains α (1-3) linked. The fucose is mostly substituted at C4 with a sulfate group and at C2 with chains of β (1-4) xylose. This fucan has neither anticoagulant (from from 0.1 to 100µg) nor hemorrhagic activities (from 50 to 800 µg/mL). The antithrombotic test in vivo showed the fucan A has no activity in any of the concentrations (from 0.2 to 20µg/g/day) tested 1h after polysaccharide administration. However, when fucan A was injected endovenously 24h before the ligature of the venae cavae, we observed a dose-dependent effect, reaching saturation at around 20g/g of rat weight. In addition, this effect is also time-dependent, reaching saturation around 16h after fucan administration. In addition, regardless of administration pathway, fucan A displayed antithrombotic action. The exception was the oral pathway. Of particular importance was the finding that fucan A stimulates the synthesis of an antithrombotic heparan sulfate from endothelial cells like heparin. The hypothesis has been raised that in vivo antithrombotic activity of fucan A is related to the increased production this heparan. Taken together with the fact that the compound is practically devoid of anticoagulant and hemorrhagic activity suggests that it may be an ideal antithrombotic agent in vivo

Physiological dose response of coffee (Coffea arabica L.) plants to glyphosate depends on growth stage

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ticks' response to feeding on host immunized with glandular extracts of Rhipicephalus sanguineus females fed for 2, 4, and 6 days. I. Inactivity or early degeneration of salivary glands?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade física de um Latossolo Vermelho cultivado com soja submetido a níveis de compactação e de irrigação

Manter uma boa qualidade física do solo é importante para preservar o meio ambiente, além de maximizar a produtividade das plantas. Um solo compactado poderá interferir na densidade, na porosidade e na resistência do solo à penetração, influenciando no crescimento radicular. A presente pesquisa objetivou avaliar a qualidade física de um Latossolo Vermelho eutroférrico, textura argilosa, com a cultivar de soja CAC-1, submetido a quatro níveis de compactação e três níveis de irrigação, utilizando os atributos físicos do solo, assim como a correlação do sistema radicular com a produtividade da cultura. O delineamento experimental foi em blocos ao acaso, com parcelas subdivididas, com quatro repetições. Os níveis de compactação foram: C0 = 0, C2 = 2, C4 = 4 e C6 = 6 passadas, no mesmo local, de um trator de 11 t. Foram coletadas amostras indeformadas de solo nas entrelinhas da cultura da soja, para determinação dos atributos físicos, nas camadas de 0-0,10 e 0,10-0,20 m. A produtividade máxima da soja foi obtida com a resistência do solo à penetração de 0,71 MPa. O sistema radicular correlacionou-se inversamente com a produtividade da soja.

Influência do cultivo da cana-de-açúcar e da mineralogia da fração argila nas propriedades físicas de latossolos vermelhos

As atuais técnicas de manejo da cultura da cana-de-açúcar utilizam um vigoroso revolvimento do solo por ocasião do plantio, com o uso de arados, grades pesadas e subsoladores. O objetivo deste trabalho foi avaliar o grau de modificação de algumas propriedades físicas de um Latossolo Vermelho caulinítico (LVd) e de um Latossolo Vermelho caulinítico-oxídico (LVdf) cultivados com cana-de-açúcar e sob mata nativa no município de Jaboticabal (SP), além de comparar as propriedades físicas encontradas em ambos os Latossolos. O delineamento experimental utilizado foi o inteiramente casualizado, em esquema de parcelas subdivididas 4 x 3 (manejos e camadas), com quatro repetições. Também foi realizada a análise conjunta entre as propriedades físicas dos Latossolos. Os sistemas de uso foram: cana planta (CP), cana soca de segundo ano (C2), cana soca de quarto ano (C4) e mata nativa (MN). Avaliaram-se a densidade do solo (Ds), a sua porosidade e o diâmetro médio ponderado (DMP) nas camadas de 00,10, 0,10-0,20 e 0,20-0,30 m. Os efeitos dos sistemas de uso e manejo sobre os atributos físicos, nas diferentes camadas, foram verificados a partir da análise de variância; quando significativas, as médias foram comparadas pelo teste de Tukey a 5 %. A MN do LVdf apresentou maior macroporosidade e menor microporosidade em relação à das áreas cultivadas, mas, para porosidade total e Ds, a MN apresentou diferença apenas para C2 e C4. O tempo de cultivo da cana-de-açúcar proporcionou o aumento da Ds e diminuição da macroporosidade em ambos os Latossolos. Entretanto, o maior teor de óxido de Fe no LVdf proporcionou maior porosidade total e menor Ds, e sua macroporosidade permaneceu acima de 0,10 m³ m-3 em todos os manejos e camadas. Os sistemas de uso do solo com cana-de-açúcar reduziram a estabilidade de agregados, em relação à mata nativa.

Signal transduction-related responses to phytohormones and environmental challenges in sugarcane

Background: Sugarcane is an increasingly economically and environmentally important C4 grass, used for the production of sugar and bioethanol, a low-carbon emission fuel. Sugarcane originated from crosses of Saccharum species and is noted for its unique capacity to accumulate high amounts of sucrose in its stems. Environmental stresses limit enormously sugarcane productivity worldwide. To investigate transcriptome changes in response to environmental inputs that alter yield we used cDNA microarrays to profile expression of 1,545 genes in plants submitted to drought, phosphate starvation, herbivory and N-2-fixing endophytic bacteria. We also investigated the response to phytohormones (abscisic acid and methyl jasmonate). The arrayed elements correspond mostly to genes involved in signal transduction, hormone biosynthesis, transcription factors, novel genes and genes corresponding to unknown proteins.Results: Adopting an outliers searching method 179 genes with strikingly different expression levels were identified as differentially expressed in at least one of the treatments analysed. Self Organizing Maps were used to cluster the expression profiles of 695 genes that showed a highly correlated expression pattern among replicates. The expression data for 22 genes was evaluated for 36 experimental data points by quantitative RT-PCR indicating a validation rate of 80.5% using three biological experimental replicates. The SUCAST Database was created that provides public access to the data described in this work, linked to tissue expression profiling and the SUCAST gene category and sequence analysis. The SUCAST database also includes a categorization of the sugarcane kinome based on a phylogenetic grouping that included 182 undefined kinases.Conclusion: An extensive study on the sugarcane transcriptome was performed. Sugarcane genes responsive to phytohormones and to challenges sugarcane commonly deals with in the field were identified. Additionally, the protein kinases were annotated based on a phylogenetic approach. The experimental design and statistical analysis applied proved robust to unravel genes associated with a diverse array of conditions attributing novel functions to previously unknown or undefined genes. The data consolidated in the SUCAST database resource can guide further studies and be useful for the development of improved sugarcane varieties.

Phosphorus bioavailability in diets for growing horses

A study of phosphorus (P) metabolism was carried out using 12 month old Brasileiro de Hipismo breed of horses to determine the P bioavailability available from feeds commonly fed to horses in Brazil. Five different diets were formulated to contain approximately equivalent levels of crude protein and digestible energy, as well as to supply at least 22 g P/horse/day (NRC, 1989). All 5 diets contained 40% Bermuda coastal hay plus 60% concentrate. The 5 different concentrates contained: C1 (corn+ cottonseed meal) C2 (corn grain+soybean meal) C3 (corn+sugarcane yeast), C4 (oat+cottonseed meal), and C5 (oat+soybean meal). The radioisotope (32)p was injected with 30 NIB. Blood, feces and urine were collected for 7 days to evaluate endogenous fecal P and true absorption. Analysis of variance of P intake showed differences due to dietary effects (P < 0.05). Concentrate C3 had the lowest intake (79.68 mg/ kg BW). All of the diets produced positive P retention. Absolute values for P concentrations in plasma, urine, feces and endogenous feces did not vary between diets. Values for endogenous fecal P were independent of the level of P intake, so the correlation between P intake and P endogenous was not significant. P bioavailability values were 50.75; 40.98; 43.50; 51.03 and 57.68% for diets C1 through C5, respectively. However, differences in P bioavailability were found (P < 0.05) between diets. Diets C2 and C3 had lower P bioavailability than the other diets. The P bioavailability of all dietary treatments in this study exceeded NRC (1989) postulations of 35% true P absorption in diets not supplemented with inorganic P. The results of this study indicate that inorganic P supplementation is not needed for growing yearlings fed common Brazilian feeds. Considering the high cost of P supplementation and the risk of environmental P contamination, inorganic phosphorus supplementation for growing yearlings may not be required. (c) 2007 Elsevier B.V. All rights reserved.