Estudo do comportamento biomecânico de aneurismas cerebrais

Os aneurismas cerebrais são dilatações patológicas das artérias cerebrais e são conhecidos como um dos eventos cerebrovasculares mais comuns e graves. A maioria dos aneurismas cerebrais não provocam sintomas até que se tornem grandes, começando a vazar sangue ou a romperem-se. O principal objetivo deste trabalho é a caracterização do comportamento biomecânico de aneurismas, tendo em consideração diferentes parâmetros geométricos e fisiológicos, de forma a analisar o comportamento da parede de um vaso sanguíneo aquando a formação de um aneurisma. O estudo numérico foi efetuado considerando diferentes modelos constitutivos híper-elásticos, que é o caso dos vasos sanguíneos, com intuito de verificar qual o que melhor se adequa a este tipo de estudos e de analisar e calcular os deslocamentos e as deformações ocorridas no aneurisma cerebral. Os diferentes modelos constitutivos foram aproximados por uma curva de tensão/deformação que contém valores experimentais de um ensaio de tração até à rutura de uma mucosa vaginal. Foram utilizados dois módulos do software Ansys®, sendo estes o Fluent e o Static Structural. O primeiro utilizou-se determinar a pressão exercida pelo fluido na parede interior do canal, sendo este resultado exportado para o Static Structural, permitindo assim fazer o estudo estrutural do canal com aneurisma. Concluiu-se que a nível qualitativo, qualquer modelo constitutivo estudado pode ser utilizado, pois todos mostram o mesmo tipo de distribuição de deslocamentos e deformações. No entanto, os modelos mais fiáveis a nível quantitativo é o modelo de Mooney-Rivlin 5 Parameter e o Polynomial 2nd Order, pois apresentam os mesmos resultados.

Geologia, petrologia, geocronologia e mineralizações sulfetadas do complexo ézio, província mineral de carajás, Brasil

Dissertação (mestrado)—Universidade de Brasília, Instituto de Geociências, Pós-Graduação em Geologia, 2015.

Caracterização de atapulgita visando aplicação para reforço de materiais poloméricos

The clay mineral attapulgite is a group of hormitas, which has its structures formed by microchannels, which give superior technological properties classified the industrial clays, clays of this group has a very versatile range of applications, ranging from the drilling fluid for wells oil has applications in the pharmaceutical industry. Such properties can be improved by activating acid and / or thermal activation. The attapulgite when activated can improve by up to 5-8 times some of its properties. The clay was characterized by X-ray diffraction, fluorescence, thermogravimetric analysis, differential thermal analysis, scanning electron microscopy and transmission electron microscopy before and after chemical activation. It can be seen through the results the efficiency of chemical treatment, which modified the clay without damaging its structure, as well as production of polymer matrix composites with particles dispersed atapugita

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Comportamento reológico de materiais cimentícios para poços de petróleo contendo naftaleno condensado ou policarboxilato

Pastas a base de cimento Portland são utilizadas na cimentação de poços de petróleo. Elas consistem de uma mistura de partículas sólidas de cimento dispersas em água e aditivos. Atualmente, diversos materiais alternativos são utilizados como aditivos, objetivando a modificação e a melhoria das propriedades das pastas de cimento, especialmente no aumento da fluidez. Novos aditivos plastificantes são capazes de suportar as diversas condições de poços, promovendo propriedades no estado fluido compatíveis às condições exigidas para cimentação.Dispersantes são os componentes da pasta que garantem fluidez, além de proporcionar controle na água perdida por filtração na formação porosa, garantindo o sucesso da operação de bombeio. Em deter minados campos, além do efeito da profundidade, as condições geológicas das formações promovemvariações do gradiente de pressão e temperatura ao longo da profundidade vertical do poço. Recentemente, diversos aditivos químicos da indústria da construção civil tem sido estudados em condições de cimentação de poços de petróleo. Vários produtos testados tem apresentado desempenho superior aos produtos normalmente empregados pela indústria de petróleo com boa relação custo/benefício em função do volume de mercado da construção civil. Resultados promissores na seleção de aditivos com função dispersante da construção civil para operações de cimentação de poços de petróleo onshore foram obtidos para temperaturas até 80°C. O potencial de uso desses aditivos permite estabelecer novas soluções para problemas encontrados na cimentação de poços de petróleo HPHT, poços sujeitos à injeção de vapor, poços depletados e poços produtores de gás. Na construção civil, os superplastificantes permitem reduzir o fator água/cimento das argamassas proporcionando melhoria de propriedades como resistência mecânica e fluidez. Assim, o objetivo deste trabalho foi o estudo e a caracterização reológica de pastas constituídas de cimento Portland, água e aditivos do tipo plastificante, com função dispersante a base de naftaleno condensado e policarboxilato, na faixa de temperaturas de 58°C e 70ºC. As condições utilizadas para a avaliação dos aditivos alternativos foram baseadas em uma cimentação primária para um poço hipotético de 2200 m de profundidade e gradientes geotérmicos de 1,7°F/100 pés e 2,1°F/100 pés. Os resultados demonstraram a grande eficiência e o poder dispersivo do policarboxilato para as temperaturas estudadas. O aditivo promoveu alta fluidez, sem efeitos de sedimentação da pasta. O dispersante à base de naftaleno reduziutant o a viscosidade plástica como o limite de escoamento acimada concentração a partir de 0,13%. O modelo de Bingham descreveu bem o comportamento reológico das pastas com policarboxilato para todas as concentrações

Estudo da imobilização das proteases aspárticas da flor de Cynara cardunculus L. Reologia da coalhada

Mestrado em Biotecnologia, Faculdade de Engenharia de Recursos Naturais, Univ. do Algarve, 2005

Evaluación antimicrobiana de rifampicina nanoencapsulada contra aggregatibacter actinomycetemcomitans presente en la periodontitis

Introducción. A pesar de los esfuerzos tanto de la medicina como de la industria farmacéutica, el incremento en la prevalencia de resistencia en bacterias patógenas frente a antibióticos se ha vuelto uno de los mayores problemas en la medicina moderna. El área odontológica tampoco se encuentra exenta, siendo común el uso excesivo de antibióticos lo que contribuye al desarrollo de resistencia antimicrobiana. La primera etapa para el desarrollo de la enfermedad periodontal es la formación de un biofilm de bacterias periodontopatógenas, siendo el Aggregaribacter actinomycetemcomitans (A.a) uno de los más asociados a dicha enfermedad. El tratamiento de esta patología se basa en remover mecánicamente la placa dentobacteriana y, en segunda instancia, en el apoyo de terapia antimicrobiana para coadyuvar la eliminación de las bacterias periodontopatógenas, cuales tienen gran similitud con Mycobacterium tuberculosis. La rifampicina es uno de los antibióticos efectivos contra bacterias multi-resistentes y la primera elección en el tratamiento de tuberculosis activa. Con el fin de mejorar la terapia farmacológica y evadir la resistencia del agente infectivo, se han propuesto nuevas estrategias basadas en sistemas de liberación controlada. Entre los más estudiados en los últimos 10 años se encuentran las nanopartículas poliméricas. El objetivo del presente estudio fue evaluar la actividad antimicrobiana de la rifampicina nanoencapsulada contra el A.a presente en la periodontitis. Materiales y Métodos. Para el estudio, Se tomaron muestras de fluido crevicular en pacientes con bolsas periodontales de 5-10 mm de profundidad. Se inoculo caldo de tripticaseina de soya (TCS) con las muestras tomadas y se incubaron a 37 ° C en condiciones aeróbicas por 7 días. La presencia de Aggregatibacter actinomycetemcomitans (A.a) fue determinado mediante PCR en tiempo real. La Concentración Mínima Inhibitoria (MIC) de rifampicina para interferir con el crecimiento de bacterias orales fue determinada mediante la técnica de dilución de tubos. Posteriormente se prepararon mediante la técnica de nanoprecipitación NP de Eudragit® EPO, L100-55 y PLA entre 100 y 200 nm y su IP con distribución de tamaño homogéneo. Resultados. A.a fue detectado en muestras de fluido crevicular en pacientes con periodontitis, corroborando su asociación con dicha patología. La efectividad de la rifampicina libre contra bacterias orales fue confirmada, obteniéndose una CMI de 1 µg/ml. Las NP con Rifampicina se ajustaron a la misma CMI que la Rif libre. Las NP de Eudragit® EPO cargadas con Rif mostraron que la liberación de la Rif de la NP fue inmediata, mientras que el Eudragit® L100-55 y PLA con Rif no mostró inhibición durante los 5 días de incubación. Esto hace suponer que el fármaco no fue liberado o solo se liberó en una baja proporción que no permitió llegar a la CMI. Conclusión. La rifampicina es una excelente alternativa terapéutica para el tratamiento de la enfermedad periodontal, promoviendo resultados favorables en la evaluación clínica de pacientes. Sería interesante continuar con estudios utilizando otro polímero o mezcla de ellos para favorecer la liberación del fármaco en la NP.

Do livro ao fantoche, reciclando palavras. Desenvolvimento da comunicação oral

Dissertação de Mestrado, Educação Pré-Escolar, Escola Superior de Educação e Comunicação, Universidade do Algarve, 2016

Injeção de vapor e solvente como um método de recuperação avançada em reservatório avançada em reservatórios de óleo pesado

Currently a resource more and more used by the petroleum industry to increase the efficiency of steam flood mechanism is the addition of solvents. The process can be understood as a combination of a thermal method (steam injection) with a miscible method (solvent injection), promoting, thus, the reduction of interfacial tensions and oil viscosity. The use of solvent alone tends to be limited because of its high cost. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a zone of low viscosity between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method, a numerical study of the process was done contemplating the effects of some operational parameters (distance between wells, injection steam rate, kind of solvent and injected solvent volume)on the accumulated production of oil, recovery factor and oil-steam rate. Semisynthetic models were used in this study but reservoir data can be extrapolated for practical applications situations on Potiguar Basin. Simulations were performed in STARS (CMG, 2007.11). It was found that injected solvent volumes increased oil recovery and oil rates. Further the majority of the injected solvent was produced and can be recycled

Cinemática de partículas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo: avaliação durante paradas operacionais

The new oil reservoirs discoveries in onshore and ultra deep water offshore fields and complex trajectories require the optimization of procedures to reduce the stops operation during the well drilling, especially because the platforms and equipment high cost, and risks which are inherent to the operation. Among the most important aspects stands out the drilling fluids project and their behavior against different situations that may occur during the process. By means of sedimentation experiments, a correlation has been validated to determe the sedimentation particles velocity in variable viscosity fluids over time, applying the correction due to effective viscosity that is a shear rate and time function. The viscosity evolution over time was obtained by carrying out rheologic tests using a fixed shear rate, small enough to not interfere in the fluid gelling process. With the sedimentation particles velocity and the fluid viscosity over time equations an iterative procedure was proposed to determine the particles displacement over time. These equations were implemented in a case study to simulate the cuttings sedimentation generated in the oil well drilling during stops operation, especially in the connections and tripping, allowing the drilling fluid project in order to maintain the cuttings in suspension, avoiding risks, such as stuck pipe and in more drastic conditions, the loss of the well

Caso práctico sobre la elaboración del dictamen para empresas acogidas a la ley de servicios internacionales.

Un caso práctico sobre la elaboración de un dictamen para las empresas acogidas a la Ley de Servicios Internacionales es un tema nuevo para muchos profesionales y estudiantes de la Contaduría Pública; por ello la elaboración de dicho caso práctico es como un inicio a la práctica de la Ley en mención, ya que a la fecha no existe documento técnico que de manera integral aborde lo relativo a la elaboración de un dictamen para las empresas acogidas a la Ley de Servicios Internacionales, siendo ésta una oportunidad para adquirir nuevos conocimientos como profesional de Contaduría Pública, así como a estudiantes de la carrera de licenciatura de Contaduría Pública y para estudiantes de carreras afines, considerándolo como un útil aporte para los interesados en el documento, como la búsqueda de una guía de elaboración del dictamen, modelos de cuestionarios de Control Interno, planillas de decisiones preliminares, programas de auditoría; todo para la ejecución de auditoría para las empresas acogidas a esta Ley, así como la Administración Tributaria se ha pronunciado, en el caso de la Guía para la Elaboración del Dictamen e Informe Fiscal, que se encuentra en la página web del Ministerio de Hacienda. El objetivo de la elaboración del trabajo de investigación es presentar a través de un caso práctico de manera clara, ordenada y precisa el desarrollo, los procedimientos y los requisitos técnicos y legales de una auditoria sobre el cumplimiento de las obligaciones contenidas en la Ley de Servicios Internacionales, para que el lector tenga la perspectiva de elaboración de un Dictamen e Informe Final sobre la auditoria de cumplimiento de obligaciones de la Ley en mención. Debido a que la investigación realizada es de una Ley existente se tomó como fuente de estudio para obtener la información del tema dicha Ley. Para la elaboración del trabajo de investigación se utilizó el tipo de investigación documental informativa (expositiva), ya que el escrito se basó en información relevante de las diversas fuentes, sin tratar de aprobar u objetar una idea o postura. Nuestra contribución radicó en analizar y seleccionar de esta información aquello que es relevante para la investigación. Por último se organizó la información para cubrir todo el tema, sintetizar las ideas y luego fueron presentadas en un reporte final que, a la vez, sea fluido y esté claramente escrito. Para el desarrollo del trabajo de se utilizó como instrumento la observación, mayormente la observación por medio de entrevista para conocer los procesos del objeto a estudio y un análisis de la información obtenida para concluir con la Opinión del Auditor. Dicha opinión se ve reflejada en el Dictamen e Informe Final, el cual fue elaborado mediante el desarrollo de cuestionarios y programas de auditoría. Tomando en cuenta que el desarrollo de los cuestionarios se hizo a través de visitas al cliente en un determinado período de tiempo, el cual se midió mediante un cronograma de actividades. Concluyendo con que el tema de investigación valió la pena elaborarlo, puesto que se conocieron nuevas áreas, las cuales están siendo puestas en práctica, aunque por el momento son pocas las empresas que se encuentran acogidas a la Ley de Servicios Internacionales así como los auditores autorizados por el Ministerio de Hacienda. Es recomendable, que las empresas que pretendan ser acogidas por dicha Ley, evalúen muy bien la actividad económica que llevan a cabo, para así mantener los beneficios de la Ley en mención.

Estudo paramétrico da injeção de vapor em reservatórios delgados

Exploration of heavy oil reservoirs is increasing every year in worldwide, because the discovery of light oil reservoirs is becoming increasingly rare. This fact has stimulated the research with the purpose of becoming viable, technically and economically, the exploration of such oil reserves. In Brazil, in special in the Northeast region, there is a large amount of heavy oil reservoir, where the recovery by the so called secondary methods Water injection or gas injection is inefficient or even impracticable in some reservoirs with high viscosity oils (heavy oils). In this scenario, steam injection appears as an interesting alternative for recover of these kinds of oil reservoirs. Its main mechanism consists of oil viscosity reduction through steam injection, increasing reservoir temperature. This work presents a parametric simulation study of some operational and reservoir variables that had influence on oil recovery in thin reservoirs typically found in Brazilian Northeast Basins, that use the steam injection as improved oil recovery method. To carry out simulations, it was used the commercial software STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modeling Group) version 2007.11. Reservoirs variables studied were horizontal permeability, vertical and horizontal permeability ratio, water zone and pay zone thickness ratio, pay zone thickness and thermal conductivity of the rock. Whereas, operational parameters studied were distance between wells and steam injection rate. Results showed that reservoir variables that had more influence on oil recovery were horizontal permeability and water zone and pay zone thickness ratio. In relation to operational variables, results showed that short distances between wells and low steam injection rates improved oil recovery

Implementação de um Módulo de Supervisão para um Sistema de Detecção de Vazamentos em Dutos de Petróleo

The transport of fluids through pipes is used in the oil industry, being the pipelines an important link in the logistics flow of fluids. However, the pipelines suffer deterioration in their walls caused by several factors which may cause loss of fluids to the environment, justifying the investment in techniques and methods of leak detection to minimize fluid loss and environmental damage. This work presents the development of a supervisory module in order to inform to the operator the leakage in the pipeline monitored in the shortest time possible, in order that the operator log procedure that entails the end of the leak. This module is a component of a system designed to detect leaks in oil pipelines using sonic technology, wavelets and neural networks. The plant used in the development and testing of the module presented here was the system of tanks of LAMP, and its LAN, as monitoring network. The proposal consists of, basically, two stages. Initially, assess the performance of the communication infrastructure of the supervisory module. Later, simulate leaks so that the DSP sends information to the supervisory performs the calculation of the location of leaks and indicate to which sensor the leak is closer, and using the system of tanks of LAMP, capture the pressure in the pipeline monitored by piezoresistive sensors, this information being processed by the DSP and sent to the supervisory to be presented to the user in real time

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Simulador de dano à formação, aplicado ao Projeto e à execução da perfuração de poços de petróleo

With the high oil price variability, the petroleum and the reservoir engineers are usually face to face on how they can evaluate the well performance and productivity. They can improve high productivity from the well construction to the secondary recoveries, but they have never tried a measurement in the drilling operations about the lower productivity index. As a rule, frequently the drilling operations hear from the reservoir engineering and geology that, if there is a formation damage, probably some drilling operations practices were not done properly or the good practice in petroleum engineering or mud engineering were not observed. The study in this working search is an attempt of how to measure a formation damage just from the project drilling to the drilling operations, with datum from the fields in Brazilian northeast and putting into practice a Simulator developed from the modeling on the theory offered by different experts and sources in formation damage